Tăng Minh Phát http://thietbicongnghiepnang.com/ Tăng Minh Phát - Đại lý phân phối thiết bị cơ điện, thiết bị nhà máy như : Redlion Vietnam, Tdk lambda vietnam, wise vietnam, burkert vietnam 2025-12-04 10:13:52 +0000 vi hourly 1 Website Máy đo lực ESM750S Mark-10 http://thietbicongnghiepnang.com/may-do-luc-esm750s-mark10 2019-10-09 09:06:30 http://thietbicongnghiepnang.com/may-do-luc-esm750s-mark10

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Readmore

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750S Mark 10

  • Force measurement to 750 lbF (3.4 kN)
  • 14.2" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM750S Mark-10 appeared first on thietbicongnghiepnang.com.

]]>
Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750S Mark 10

  • Force measurement to 750 lbF (3.4 kN)
  • 14.2" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

]]>
Máy đo lực ESM303 Mark-10 http://thietbicongnghiepnang.com/may-do-luc-esm303-mark10 2019-10-09 09:05:57 http://thietbicongnghiepnang.com/may-do-luc-esm303-mark10

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Máy đo lực ESM303 Mark-10

Readmore

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM303 Mark 10

  • Force measurement to 300 lbF (1.5 kN)
  • Vertical orientation
  • 18" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

1. ĐẶC ĐIỂM MÁY ĐO LỰC ESM303

  • Selectable speed setting

  • Upper and lower travel limit switches

  • Adjustable, removal controller with intuitive menu navigation

  • Password protection of test parameters

  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

  • USB output of force vs. time or force vs. travel

  • Compact footprint, suitable for crowded workbenches

  • Ergonomic design, with smart, clean cable management

  • Integrated electronics assembly, easily removed and transported

  • Adjustable mounting plate with T-slot base

2. Thông số kĩ thuật ESM303

Load capacity:

< 24 in [610 mm]/min:

> 24 in [610 mm]/min:

300 lbF [1.5 kN]

200 lbF [1 kN]

Speed range:

Standard:

Optional:

0.5 - 13 in/min [13 - 330 mm/min]

0.02 - 45 in/min [0.5 - 1,100 mm/min]

Maximum travel:

18.0 in [457 mm]

Speed setting accuracy:

±0.2%

Speed variation with load:

±0% [Stepper motor driven]

Travel accuracy:

±0.002 in per 10 in [±0.05 mm per 250 mm]

Travel resolution:

0.001 in [0.02 mm]

Travel display position retention:

Most recent position is recalled upon powering on

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 80-240 VAC, 50/60 Hz, 60W

Weight:

56.5 lb [25.6 kg]

3. CÁC CHỨC NĂNG CỦA ESM303

Function

Part No.

Description

Requirements

FollowMeTM

AF008

Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Travel indication

AF009

Travel is indicated on the control unit display, with output via USB. The most recent position is displayed upon powering on. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs.

Backlash and nonlinearity are virtually eliminated.

  • Field hardware installation required.
  • If data output to a PC is required, add 09-1214 and 09-1158 cables, and a Series 7 or 5 gauge or indicator with load cell.

Computer control

AF010

The ESM303 may be fully controlled by a PC through a custom- written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).

This option is not required for MESUR™gauge Plus software.

  • Series 7 or 5 gauge or indicator with load cell
  • AF009 travel indication
  • 09-1214 interface cable
  • 09-1158 USB output cable
  • For full speed range, consider AF017 and AF018 speed range extensions

Programmable travel limits

AF011

The stand stops at or cycles between programmable upper and lower travel distances.

- AF009 travel indication option

Overload protection

AF012

Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Auto return

AF013

The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.

  • If reversing at force set point: Series 7 or 5 gauge or indicator with load cell, and 09-1214 interface cable
  • If reversing at travel limit: AF011 programmable travel limits option
  • If reversing at break: AF019 break detection op- tion and 09-1214 interface cable

Cycling / dwell time

AF014

Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.

- Same as auto return, at the same speed in each direction. Add AF016 for independent up and down speeds.

Independent up and down speeds

AF016

Individually configure speeds for the up and down directions.

Low speed range extension

AF017

Extends the standard speed range down to

0.02 in/min (0.5 mm/min).

High speed range extension

AF018

Extends the standard speed range up to 45 in/min (1,100 mm/min).

Break detection

AF019

Crosshead stops at a sudden drop in force. Programmable percentage of peak force.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Load holding

AF020

Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.

  • Series 7 or 5 gauge or indicator with load cell
  • If a specified time is required, add AF014 cycling

/ dwell time option

  • 09-1214 interface cable

Preload / sample touch

AF021

Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.

  • AF009 travel indication
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Profiles

AF022

Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.

Complete options package

AFCOMP

Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable.

Requires a Series 7 or 5 gauge or indicator with load cell.

4. ORDERING INFORMATION

Hardware

ESM303

Motorized test stand,110V*

09-1214

Interface cable, gauge / indicator to ESM303

09-1158

USB output cable

AC1062

Load cell / indicator mounting kit

ESM303-001-1 / -2 / -3

Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-002-1 / -2 / -3

Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-003

Safety shield

Controller Options

AF008

FollowMeTM force-based manual positioning

AF009

Travel indication, with USB output

AF010

Computer control, via USB

AF011

Programmable travel limits

AF012

Integrated overload protection

AF013

Auto return

AF014

Cycling / dwell time

AF016

Independent up and down speeds

AF017

Extended speed range, low

AF018

Extended speed range, high

AF019

Break detection

AF020

Load holding

AF021

Preload / sample touch

AF022

Profiles

AFCOMP

Complete options package

(includes all Controller Options, plus 09-1124 and 09-1158 cables)

5. CẤU TẠO ESM303

Máy đo lực ESM303 Mark-10

6. BẢN VẼ KĨ THUẬT

Máy đo lực ESM303 Mark-10

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM303 Mark-10 appeared first on thietbicongnghiepnang.com.

]]>
Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM303 Mark 10

  • Force measurement to 300 lbF (1.5 kN)
  • Vertical orientation
  • 18" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

1. ĐẶC ĐIỂM MÁY ĐO LỰC ESM303

  • Selectable speed setting

  • Upper and lower travel limit switches

  • Adjustable, removal controller with intuitive menu navigation

  • Password protection of test parameters

  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

  • USB output of force vs. time or force vs. travel

  • Compact footprint, suitable for crowded workbenches

  • Ergonomic design, with smart, clean cable management

  • Integrated electronics assembly, easily removed and transported

  • Adjustable mounting plate with T-slot base

2. Thông số kĩ thuật ESM303

Load capacity:

< 24 in [610 mm]/min:

> 24 in [610 mm]/min:

300 lbF [1.5 kN]

200 lbF [1 kN]

Speed range:

Standard:

Optional:

0.5 - 13 in/min [13 - 330 mm/min]

0.02 - 45 in/min [0.5 - 1,100 mm/min]

Maximum travel:

18.0 in [457 mm]

Speed setting accuracy:

±0.2%

Speed variation with load:

±0% [Stepper motor driven]

Travel accuracy:

±0.002 in per 10 in [±0.05 mm per 250 mm]

Travel resolution:

0.001 in [0.02 mm]

Travel display position retention:

Most recent position is recalled upon powering on

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 80-240 VAC, 50/60 Hz, 60W

Weight:

56.5 lb [25.6 kg]

3. CÁC CHỨC NĂNG CỦA ESM303

Function

Part No.

Description

Requirements

FollowMeTM

AF008

Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Travel indication

AF009

Travel is indicated on the control unit display, with output via USB. The most recent position is displayed upon powering on. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs.

Backlash and nonlinearity are virtually eliminated.

  • Field hardware installation required.
  • If data output to a PC is required, add 09-1214 and 09-1158 cables, and a Series 7 or 5 gauge or indicator with load cell.

Computer control

AF010

The ESM303 may be fully controlled by a PC through a custom- written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).

This option is not required for MESUR™gauge Plus software.

  • Series 7 or 5 gauge or indicator with load cell
  • AF009 travel indication
  • 09-1214 interface cable
  • 09-1158 USB output cable
  • For full speed range, consider AF017 and AF018 speed range extensions

Programmable travel limits

AF011

The stand stops at or cycles between programmable upper and lower travel distances.

- AF009 travel indication option

Overload protection

AF012

Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Auto return

AF013

The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.

  • If reversing at force set point: Series 7 or 5 gauge or indicator with load cell, and 09-1214 interface cable
  • If reversing at travel limit: AF011 programmable travel limits option
  • If reversing at break: AF019 break detection op- tion and 09-1214 interface cable

Cycling / dwell time

AF014

Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.

- Same as auto return, at the same speed in each direction. Add AF016 for independent up and down speeds.

Independent up and down speeds

AF016

Individually configure speeds for the up and down directions.

Low speed range extension

AF017

Extends the standard speed range down to

0.02 in/min (0.5 mm/min).

High speed range extension

AF018

Extends the standard speed range up to 45 in/min (1,100 mm/min).

Break detection

AF019

Crosshead stops at a sudden drop in force. Programmable percentage of peak force.

  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Load holding

AF020

Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.

  • Series 7 or 5 gauge or indicator with load cell
  • If a specified time is required, add AF014 cycling

/ dwell time option

  • 09-1214 interface cable

Preload / sample touch

AF021

Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.

  • AF009 travel indication
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Profiles

AF022

Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.

Complete options package

AFCOMP

Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable.

Requires a Series 7 or 5 gauge or indicator with load cell.

4. ORDERING INFORMATION

Hardware

ESM303

Motorized test stand,110V*

09-1214

Interface cable, gauge / indicator to ESM303

09-1158

USB output cable

AC1062

Load cell / indicator mounting kit

ESM303-001-1 / -2 / -3

Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-002-1 / -2 / -3

Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-003

Safety shield

Controller Options

AF008

FollowMeTM force-based manual positioning

AF009

Travel indication, with USB output

AF010

Computer control, via USB

AF011

Programmable travel limits

AF012

Integrated overload protection

AF013

Auto return

AF014

Cycling / dwell time

AF016

Independent up and down speeds

AF017

Extended speed range, low

AF018

Extended speed range, high

AF019

Break detection

AF020

Load holding

AF021

Preload / sample touch

AF022

Profiles

AFCOMP

Complete options package

(includes all Controller Options, plus 09-1124 and 09-1158 cables)

5. CẤU TẠO ESM303

Máy đo lực ESM303 Mark-10

6. BẢN VẼ KĨ THUẬT

Máy đo lực ESM303 Mark-10

Xem thêm chi tiêt : TẠI ĐÂY

]]>
Đại lý Wise Việt Nam - TMP VIETNAM http://thietbicongnghiepnang.com/dai-ly-wise-control-tai-viet-nam 2018-11-30 08:42:30 http://thietbicongnghiepnang.com/dai-ly-wise-control-tai-viet-nam

Wise control Vietnam - Đại lý Wise control Việt Nam. Chuyên cung cấp đồng hồ áp suất Wise, đồng hồ đo áp lực wise, đồng hồ áp lực wise, dong ho ap suat wise, đồng hồ đo áp wise, dđồng hồ áp suất wise, đồng hồ áp suất nước Wise, đồng hồ áp lực nước Wise

Readmore

Lời đâu tiên, Công ty TNHH TM DV Tăng Minh Phát (TMP) xin gửi lời cảm ơn chân thành đến quý khách hàng đã, đang và sẽ sử dụng dịch vụ của chúng tôi. Kính chúc Quý Khách sức khỏe, hạnh phúc và thịnh vượng.

Mục lục nội dung

Đại lý phân phối Wise control chính hãng tại Việt Nam - Wise Vietnam

Hàn Quốc là một quốc gia nổi tiếng với nền công nghiệp phát triển hàng đầu thế giới. Thiết bị của hãng Wise Control được người dùng rất ưa chuộng và sử dụng rộng rãi trên toàn thế giới.

Wise control cung cấp các giải pháp đa dạng cho ngành công nghiệp như:

    • Hệ thống giám sát nhiệt độ, áp suất, mức và lưu lượng.
    • Hệ thống phân tích khí
    • Sửa chữa, nâng cấp, hiệu chuẩn thiết bị đo lường và điều khiển.
    • Hỗ trợ thay thế và lắp đặt các thiết bị Tự Động Hóa.

 Lĩnh vực hoạt động:

    • Công nghiệp sản xuất Tôn, Thép
    • Công nghiệp Sợi, Dệt may
    • Công nghiệp Bia, Rượu, Nước Giải Khát
    • Công nghiệp sản xuất Xi măng
    • Công nghiệp Nhựa và Bao Bì
    • Công Nghiệp Thủy Tinh
    • Công nghiệp hóa chất, lọc hoá dầu
    • Công nghiệp lắp ráp và sản xuất máy
    • Công nghiệp xử lý nước
    • Công nghiệp sản xuất mỹ phẩm

1. Thiết bị đo áp suất Wise | Wise Control Việt Nam

a. Đồng hồ đo áp suất Wise | Đồng hồ đo áp lực Wise | Pressure gauges

Đồng hồ áp lực Wise thường được ứng dụng để : Đồng hồ đo áp suất nước- áp lực nước, đo áp suất thấp, đo áp suất chân không, đo áp suất âm, đo suất cao, đồng hồ đo áp 40Mpa, đo áp suất bồn chứa, đo chênh lệch áp suất, pressure...

Đại lý Wise Việt Nam - TMP VIETNAM

P110 series

Đại lý Wise Việt Nam - TMP VIETNAM

P111 series

Đại lý Wise Việt Nam - TMP VIETNAM

P112 series

Đại lý Wise Việt Nam - TMP VIETNAM

P113 series

Đại lý Wise Việt Nam - TMP VIETNAM

P140 series

Đại lý Wise Việt Nam - TMP VIETNAM

P163 series

Đại lý Wise Việt Nam - TMP VIETNAM

P170 series

Đại lý Wise Việt Nam - TMP VIETNAM

P221, P253

Đại lý Wise Việt Nam - TMP VIETNAM

P222 series

Đại lý Wise Việt Nam - TMP VIETNAM

P228 series

Đại lý Wise Việt Nam - TMP VIETNAM

P229 series

Đại lý Wise Việt Nam - TMP VIETNAM

P235S,P235B

Đại lý Wise Việt Nam - TMP VIETNAM

P239 series

Đồng hồ đo áp suất P252 Wise

P252 series

Đồng hồ đo áp suất P253 Wise

P253 series

Đại lý Wise Việt Nam - TMP VIETNAM

P254 series

Đại lý Wise Việt Nam - TMP VIETNAM

P255 series

Đại lý Wise Việt Nam - TMP VIETNAM

P256 series

Đại lý Wise Việt Nam - TMP VIETNAM

P257 series

Đồng hồ đo áp suất P258 Wise

P258 series

Đại lý Wise Việt Nam - TMP VIETNAM

P259 series

Đại lý Wise Việt Nam - TMP VIETNAM

P330, P335 

Đại lý Wise Việt Nam - TMP VIETNAM

P336,P338

Đại lý Wise Việt Nam - TMP VIETNAM

P359 series

Đại lý Wise Việt Nam - TMP VIETNAM

P410, P420 series

Đại lý Wise Việt Nam - TMP VIETNAM

P421 series

Đại lý Wise Việt Nam - TMP VIETNAM

P422 series

Đại lý Wise Việt Nam - TMP VIETNAM

P423 series

Đại lý Wise Việt Nam - TMP VIETNAM

P428,P429

Đại lý Wise Việt Nam - TMP VIETNAM

P430 series

Đại lý Wise Việt Nam - TMP VIETNAM

P440 series

Đại lý Wise Việt Nam - TMP VIETNAM

P500 series

Đại lý Wise Việt Nam - TMP VIETNAM

P501, P502 

Đại lý Wise Việt Nam - TMP VIETNAM

P510 series

Đại lý Wise Việt Nam - TMP VIETNAM

P520 series

Đại lý Wise Việt Nam - TMP VIETNAM

P531, P532 

Đại lý Wise Việt Nam - TMP VIETNAM

P535, P536 

Đại lý Wise Việt Nam - TMP VIETNAM

P542, P543 

Đại lý Wise Việt Nam - TMP VIETNAM

P570 series

Đại lý Wise Việt Nam - TMP VIETNAM

P580 series

Đại lý Wise Việt Nam - TMP VIETNAM

P590 series

Đại lý Wise Việt Nam - TMP VIETNAM

P701 series

Đại lý Wise Việt Nam - TMP VIETNAM

P710,P720,P730

Đại lý Wise Việt Nam - TMP VIETNAM

P740 series

Đại lý Wise Việt Nam - TMP VIETNAM

P757 series

Đại lý Wise Việt Nam - TMP VIETNAM

P761,P762,P763

Đại lý Wise Việt Nam - TMP VIETNAM

P770 series

Đại lý Wise Việt Nam - TMP VIETNAM

P790 series

Đại lý Wise Việt Nam - TMP VIETNAM

P810 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P820 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P830 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P870 series

Đại lý Wise Việt Nam - TMP VIETNAM

P910, P911 

Đại lý Wise Việt Nam - TMP VIETNAM

P912, P913

Đại lý Wise Việt Nam - TMP VIETNAM

P961 series

Đồng hồ áp suất Wise, đồng hồ đo áp lực wise, đồng hồ áp lực wise, dong ho ap suat wise, đồng hồ đo áp wise, dđồng hồ áp suất wise, đồng hồ áp suất nước Wise, đồng hồ áp lực nước Wise

* Phân loại đồng hồ đo áp Wise

a. Theo ứng dụng và mục đích sử dụng:

        Đồng hồ đo áp suất nước | Đồng hồ đo áp suất thấp | Đồng hồ đo áp suất lốp xe | Đồng hồ đo áp suất có dầu | Đồng hồ đo áp suất khí nén | Đồng hồ đo áp suất dạng màng | Đồng hồ đo áp suất điện tử | Đồng hồ đo áp suất có tiếp điểm điện

b. Theo kiểu kết nối và vật liệu

       Đồng hồ đo áp suất chân đồng | Đồng hồ đo áp suất chân đứng | Đồng hồ đo áp suất chân sau | Đồng hồ đo áp suất chân Inox | Đồng hồ đo áp suất có tính hiệu ra Transmitter 

* Những lưu ý khi chọn mua ĐỒNG HỒ ÁP SUẤT WISE

a. Giá trị thang đo ( Bar, MPa, Kpa, mmHg ,Kg/cm2…)

b. Kích thước đường kính mặt đồng hồ : 63, 100, 160, 250mm

c. Loại kết nối chân : chân đứng, chân sau.

d. Kích thước đường kính chân ren là bao nhiêu  ?

e. Chất liệu đồng hồ : Inox, Nhôm, Đồng

f. Đồng hồ đo áp suất loại có màng hay không có màng ?

g. Đồng hồ đo áp suất loại có dầu hay không có dầu ?

* Vì sao nên chọn đồng hồ đo áp suất Wise ?

  • Độ chính xác cao
  • Dễ dàng lắp đặt và sửa chữa.
  • Tuổi thọ cao
  • Giá thành hợp lý
  • Thân thiện với môi trường
  • Bảo hành tận nơi.

b. Đồng hồ đo chênh lệch áp suất Wise | Differential Gauges | Đo chêch lệch áp suất

Các loại đồng hồ đo chênh áp thường dùng : đồng hồ đo chênh áp magnehelic, đồng hồ đo chêch áp điện tử, đo chêch áp phòng sạch

Đại lý Wise Việt Nam - TMP VIETNAM

P880 series

Đại lý Wise Việt Nam - TMP VIETNAM

P690 series

Đại lý Wise Việt Nam - TMP VIETNAM

P680 series

Đại lý Wise Việt Nam - TMP VIETNAM

P670 series

Đại lý Wise Việt Nam - TMP VIETNAM

P660 series

Đại lý Wise Việt Nam - TMP VIETNAM

P650 series

Đại lý Wise Việt Nam - TMP VIETNAM

P640 series

Đại lý Wise Việt Nam - TMP VIETNAM

P620, P630 series

Đại lý Wise Việt Nam - TMP VIETNAM

PT850 series

Đại lý Wise Việt Nam - TMP VIETNAM

PT840 series

Đại lý Wise Việt Nam - TMP VIETNAM

P840 series

Đại lý Wise Việt Nam - TMP VIETNAM

P753S series

Đại lý Wise Việt Nam - TMP VIETNAM

P752S series

Đại lý Wise Việt Nam - TMP VIETNAM

P750 series

c. Công tắc áp suất Wise | Cảm biến áp suất Wise | Transmitter Sensor

Một số loại công tắc/ cảm biến áp suất thường dùng : công tắc áp suất thủy lực, công tắc áp suất điện tử, công tắc áp suất điều khiển bơm, công tắc áp suất kép, công tắc áp suất nhớt, công tắc áp suất gas

         Đại lý Wise Việt Nam - TMP VIETNAM

P991 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P990 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P980 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P970 (953 series)         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P947 Wise         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P946 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P945 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P940 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2002         

         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2001         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2003

              

Đại lý Wise Việt Nam - TMP VIETNAM

P953 (953 series)

     

2. Thiết bị đo nhiệt độ Wise | Wise Control Vietnam

a. Đồng hồ đo nhiệt độ Wise | Thermometer 

Các loại đồng hồ đo nhiệt độ thường dùng : đồng hồ đo nhiệt độ hiển thị số, đồng hồ đo nhiệt độ lò sấy, đồng hồ đo nhiệt độ có dây, đồng hồ đo nhiệt độ phòng, đồng hồ đo nhiệt độ độ ẩm, đồng hồ đo nhiệt độ lò hơi, đồng hồ cảm biến nhiệt độ

Đại lý Wise Việt Nam - TMP VIETNAM

T761, T762, T763 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T751, T752, T753 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T721, T722, T723 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T711, T712, T713 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T531, T532, T533 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T521, T522, T523 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T511, T512, T513 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T501, T502, T503 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T400 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T360 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T359 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T290 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T263 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T259 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T250 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T239 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T230 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T229 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T222 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T220 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T219 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T213 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T212 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T210 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T191 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T190 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T150 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T140 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T123 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T120 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T114 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T112 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T111 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T110 Wise

b. Thiết bị bảo vệ đầu dò nhiệt độ Wise | Thermocouple

B500 series

H100 series

R990 series

R980 series

R200

R190 (RL series)

R120 series

R110 series

c. THERMOCOUPLE & RTD | Đầu dò nhiệt độ Wise | Đầu dò củ hành Wise | Can nhiệt Wise

R960 Wise

R950 Wise

R940 Wise

R930 Wise

R921,R922 Wise

R912 (with T990)

R911 (with T900)

R840 Wise

R700 Wise

R600 Wise

R500 Wise

R430 Wise

R300 Wise

R231 Wise

R220 Wise

d. Cảm biến nhiệt độ Wise | Công tắc nhiệt độ Wise

Một số loại công tắc nhiệt độ thường dùng : công tắc nhiệt độ nước, công tắc điều chỉnh nhiệt độ, công tắc nhiệt độ rainbow, công tắc cảm biến nhiệt độ, công tắc cảm biến nhiệt độ 220v, công tắc nhiệt độ danfoss, công tắc quá nhiệt

T990 Wise

T953 Wise

T941, T942 Wise

T931 ,T932 Wise

T930 Wise

3. Đồng hồ đo lưu lượng Wise | Flowmetter

Các loại đồng hồ đo lưu lượng thường dùng : đồng hồ đo lưu lượng khí, đồng hồ đo lưu lượng nước dạng cơ, đồng hồ đo lưu lượng hóa chất, đồng hồ đo lưu lượng dầu, đồng hồ lưu lượng nước điện tử, đồng hồ đo lưu lượng nước dn50

F801 Wise

F802 Wise

F803 Wise

F804 Wise

F806 Wise

F807

F808

F809

F811

F812

F820

F821

F823

F824

F825

F826

F828

F850

F901

F822

F805

F810

F827

Xem thêm chi tiết : Tại đây

The post Đại lý Wise Việt Nam - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]>
Lời đâu tiên, Công ty TNHH TM DV Tăng Minh Phát (TMP) xin gửi lời cảm ơn chân thành đến quý khách hàng đã, đang và sẽ sử dụng dịch vụ của chúng tôi. Kính chúc Quý Khách sức khỏe, hạnh phúc và thịnh vượng.

Mục lục nội dung

Đại lý phân phối Wise control chính hãng tại Việt Nam - Wise Vietnam

Hàn Quốc là một quốc gia nổi tiếng với nền công nghiệp phát triển hàng đầu thế giới. Thiết bị của hãng Wise Control được người dùng rất ưa chuộng và sử dụng rộng rãi trên toàn thế giới.

Wise control cung cấp các giải pháp đa dạng cho ngành công nghiệp như:

    • Hệ thống giám sát nhiệt độ, áp suất, mức và lưu lượng.
    • Hệ thống phân tích khí
    • Sửa chữa, nâng cấp, hiệu chuẩn thiết bị đo lường và điều khiển.
    • Hỗ trợ thay thế và lắp đặt các thiết bị Tự Động Hóa.

 Lĩnh vực hoạt động:

    • Công nghiệp sản xuất Tôn, Thép
    • Công nghiệp Sợi, Dệt may
    • Công nghiệp Bia, Rượu, Nước Giải Khát
    • Công nghiệp sản xuất Xi măng
    • Công nghiệp Nhựa và Bao Bì
    • Công Nghiệp Thủy Tinh
    • Công nghiệp hóa chất, lọc hoá dầu
    • Công nghiệp lắp ráp và sản xuất máy
    • Công nghiệp xử lý nước
    • Công nghiệp sản xuất mỹ phẩm

1. Thiết bị đo áp suất Wise | Wise Control Việt Nam

a. Đồng hồ đo áp suất Wise | Đồng hồ đo áp lực Wise | Pressure gauges

Đồng hồ áp lực Wise thường được ứng dụng để : Đồng hồ đo áp suất nước- áp lực nước, đo áp suất thấp, đo áp suất chân không, đo áp suất âm, đo suất cao, đồng hồ đo áp 40Mpa, đo áp suất bồn chứa, đo chênh lệch áp suất, pressure...

Đại lý Wise Việt Nam - TMP VIETNAM

P110 series

Đại lý Wise Việt Nam - TMP VIETNAM

P111 series

Đại lý Wise Việt Nam - TMP VIETNAM

P112 series

Đại lý Wise Việt Nam - TMP VIETNAM

P113 series

Đại lý Wise Việt Nam - TMP VIETNAM

P140 series

Đại lý Wise Việt Nam - TMP VIETNAM

P163 series

Đại lý Wise Việt Nam - TMP VIETNAM

P170 series

Đại lý Wise Việt Nam - TMP VIETNAM

P221, P253

Đại lý Wise Việt Nam - TMP VIETNAM

P222 series

Đại lý Wise Việt Nam - TMP VIETNAM

P228 series

Đại lý Wise Việt Nam - TMP VIETNAM

P229 series

Đại lý Wise Việt Nam - TMP VIETNAM

P235S,P235B

Đại lý Wise Việt Nam - TMP VIETNAM

P239 series

Đồng hồ đo áp suất P252 Wise

P252 series

Đồng hồ đo áp suất P253 Wise

P253 series

Đại lý Wise Việt Nam - TMP VIETNAM

P254 series

Đại lý Wise Việt Nam - TMP VIETNAM

P255 series

Đại lý Wise Việt Nam - TMP VIETNAM

P256 series

Đại lý Wise Việt Nam - TMP VIETNAM

P257 series

Đồng hồ đo áp suất P258 Wise

P258 series

Đại lý Wise Việt Nam - TMP VIETNAM

P259 series

Đại lý Wise Việt Nam - TMP VIETNAM

P330, P335 

Đại lý Wise Việt Nam - TMP VIETNAM

P336,P338

Đại lý Wise Việt Nam - TMP VIETNAM

P359 series

Đại lý Wise Việt Nam - TMP VIETNAM

P410, P420 series

Đại lý Wise Việt Nam - TMP VIETNAM

P421 series

Đại lý Wise Việt Nam - TMP VIETNAM

P422 series

Đại lý Wise Việt Nam - TMP VIETNAM

P423 series

Đại lý Wise Việt Nam - TMP VIETNAM

P428,P429

Đại lý Wise Việt Nam - TMP VIETNAM

P430 series

Đại lý Wise Việt Nam - TMP VIETNAM

P440 series

Đại lý Wise Việt Nam - TMP VIETNAM

P500 series

Đại lý Wise Việt Nam - TMP VIETNAM

P501, P502 

Đại lý Wise Việt Nam - TMP VIETNAM

P510 series

Đại lý Wise Việt Nam - TMP VIETNAM

P520 series

Đại lý Wise Việt Nam - TMP VIETNAM

P531, P532 

Đại lý Wise Việt Nam - TMP VIETNAM

P535, P536 

Đại lý Wise Việt Nam - TMP VIETNAM

P542, P543 

Đại lý Wise Việt Nam - TMP VIETNAM

P570 series

Đại lý Wise Việt Nam - TMP VIETNAM

P580 series

Đại lý Wise Việt Nam - TMP VIETNAM

P590 series

Đại lý Wise Việt Nam - TMP VIETNAM

P701 series

Đại lý Wise Việt Nam - TMP VIETNAM

P710,P720,P730

Đại lý Wise Việt Nam - TMP VIETNAM

P740 series

Đại lý Wise Việt Nam - TMP VIETNAM

P757 series

Đại lý Wise Việt Nam - TMP VIETNAM

P761,P762,P763

Đại lý Wise Việt Nam - TMP VIETNAM

P770 series

Đại lý Wise Việt Nam - TMP VIETNAM

P790 series

Đại lý Wise Việt Nam - TMP VIETNAM

P810 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P820 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P830 series 

Đại lý Wise Việt Nam - TMP VIETNAM

P870 series

Đại lý Wise Việt Nam - TMP VIETNAM

P910, P911 

Đại lý Wise Việt Nam - TMP VIETNAM

P912, P913

Đại lý Wise Việt Nam - TMP VIETNAM

P961 series

Đồng hồ áp suất Wise, đồng hồ đo áp lực wise, đồng hồ áp lực wise, dong ho ap suat wise, đồng hồ đo áp wise, dđồng hồ áp suất wise, đồng hồ áp suất nước Wise, đồng hồ áp lực nước Wise

* Phân loại đồng hồ đo áp Wise

a. Theo ứng dụng và mục đích sử dụng:

        Đồng hồ đo áp suất nước | Đồng hồ đo áp suất thấp | Đồng hồ đo áp suất lốp xe | Đồng hồ đo áp suất có dầu | Đồng hồ đo áp suất khí nén | Đồng hồ đo áp suất dạng màng | Đồng hồ đo áp suất điện tử | Đồng hồ đo áp suất có tiếp điểm điện

b. Theo kiểu kết nối và vật liệu

       Đồng hồ đo áp suất chân đồng | Đồng hồ đo áp suất chân đứng | Đồng hồ đo áp suất chân sau | Đồng hồ đo áp suất chân Inox | Đồng hồ đo áp suất có tính hiệu ra Transmitter 

* Những lưu ý khi chọn mua ĐỒNG HỒ ÁP SUẤT WISE

a. Giá trị thang đo ( Bar, MPa, Kpa, mmHg ,Kg/cm2…)

b. Kích thước đường kính mặt đồng hồ : 63, 100, 160, 250mm

c. Loại kết nối chân : chân đứng, chân sau.

d. Kích thước đường kính chân ren là bao nhiêu  ?

e. Chất liệu đồng hồ : Inox, Nhôm, Đồng

f. Đồng hồ đo áp suất loại có màng hay không có màng ?

g. Đồng hồ đo áp suất loại có dầu hay không có dầu ?

* Vì sao nên chọn đồng hồ đo áp suất Wise ?

  • Độ chính xác cao
  • Dễ dàng lắp đặt và sửa chữa.
  • Tuổi thọ cao
  • Giá thành hợp lý
  • Thân thiện với môi trường
  • Bảo hành tận nơi.

b. Đồng hồ đo chênh lệch áp suất Wise | Differential Gauges | Đo chêch lệch áp suất

Các loại đồng hồ đo chênh áp thường dùng : đồng hồ đo chênh áp magnehelic, đồng hồ đo chêch áp điện tử, đo chêch áp phòng sạch

Đại lý Wise Việt Nam - TMP VIETNAM

P880 series

Đại lý Wise Việt Nam - TMP VIETNAM

P690 series

Đại lý Wise Việt Nam - TMP VIETNAM

P680 series

Đại lý Wise Việt Nam - TMP VIETNAM

P670 series

Đại lý Wise Việt Nam - TMP VIETNAM

P660 series

Đại lý Wise Việt Nam - TMP VIETNAM

P650 series

Đại lý Wise Việt Nam - TMP VIETNAM

P640 series

Đại lý Wise Việt Nam - TMP VIETNAM

P620, P630 series

Đại lý Wise Việt Nam - TMP VIETNAM

PT850 series

Đại lý Wise Việt Nam - TMP VIETNAM

PT840 series

Đại lý Wise Việt Nam - TMP VIETNAM

P840 series

Đại lý Wise Việt Nam - TMP VIETNAM

P753S series

Đại lý Wise Việt Nam - TMP VIETNAM

P752S series

Đại lý Wise Việt Nam - TMP VIETNAM

P750 series

c. Công tắc áp suất Wise | Cảm biến áp suất Wise | Transmitter Sensor

Một số loại công tắc/ cảm biến áp suất thường dùng : công tắc áp suất thủy lực, công tắc áp suất điện tử, công tắc áp suất điều khiển bơm, công tắc áp suất kép, công tắc áp suất nhớt, công tắc áp suất gas

         Đại lý Wise Việt Nam - TMP VIETNAM

P991 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P990 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P980 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P970 (953 series)         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P947 Wise         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P946 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P945 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

P940 series         

         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2002         

         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2001         

Đại lý Wise Việt Nam - TMP VIETNAM

SMT2003

              

Đại lý Wise Việt Nam - TMP VIETNAM

P953 (953 series)

     

2. Thiết bị đo nhiệt độ Wise | Wise Control Vietnam

a. Đồng hồ đo nhiệt độ Wise | Thermometer 

Các loại đồng hồ đo nhiệt độ thường dùng : đồng hồ đo nhiệt độ hiển thị số, đồng hồ đo nhiệt độ lò sấy, đồng hồ đo nhiệt độ có dây, đồng hồ đo nhiệt độ phòng, đồng hồ đo nhiệt độ độ ẩm, đồng hồ đo nhiệt độ lò hơi, đồng hồ cảm biến nhiệt độ

Đại lý Wise Việt Nam - TMP VIETNAM

T761, T762, T763 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T751, T752, T753 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T721, T722, T723 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T711, T712, T713 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T531, T532, T533 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T521, T522, T523 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T511, T512, T513 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T501, T502, T503 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T400 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T360 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T359 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T290 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T263 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T259 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T250 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T239 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T230 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T229 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T222 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T220 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T219 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T213 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T212 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T210 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T191 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T190 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T150 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T140 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T123 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T120 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T114 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T112 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T111 Wise

Đại lý Wise Việt Nam - TMP VIETNAM

T110 Wise

b. Thiết bị bảo vệ đầu dò nhiệt độ Wise | Thermocouple

B500 series

H100 series

R990 series

R980 series

R200

R190 (RL series)

R120 series

R110 series

c. THERMOCOUPLE & RTD | Đầu dò nhiệt độ Wise | Đầu dò củ hành Wise | Can nhiệt Wise

R960 Wise

R950 Wise

R940 Wise

R930 Wise

R921,R922 Wise

R912 (with T990)

R911 (with T900)

R840 Wise

R700 Wise

R600 Wise

R500 Wise

R430 Wise

R300 Wise

R231 Wise

R220 Wise

d. Cảm biến nhiệt độ Wise | Công tắc nhiệt độ Wise

Một số loại công tắc nhiệt độ thường dùng : công tắc nhiệt độ nước, công tắc điều chỉnh nhiệt độ, công tắc nhiệt độ rainbow, công tắc cảm biến nhiệt độ, công tắc cảm biến nhiệt độ 220v, công tắc nhiệt độ danfoss, công tắc quá nhiệt

T990 Wise

T953 Wise

T941, T942 Wise

T931 ,T932 Wise

T930 Wise

3. Đồng hồ đo lưu lượng Wise | Flowmetter

Các loại đồng hồ đo lưu lượng thường dùng : đồng hồ đo lưu lượng khí, đồng hồ đo lưu lượng nước dạng cơ, đồng hồ đo lưu lượng hóa chất, đồng hồ đo lưu lượng dầu, đồng hồ lưu lượng nước điện tử, đồng hồ đo lưu lượng nước dn50

F801 Wise

F802 Wise

F803 Wise

F804 Wise

F806 Wise

F807

F808

F809

F811

F812

F820

F821

F823

F824

F825

F826

F828

F850

F901

F822

F805

F810

F827

Xem thêm chi tiết : Tại đây

]]>
Công tắc giật dây dừng khẩn cấp http://thietbicongnghiepnang.com/cong-tac-giat-day-dung-khan-cap 2019-08-16 11:39:19 http://thietbicongnghiepnang.com/cong-tac-giat-day-dung-khan-cap Công tắc giật dây dừng khẩn cấp Readmore

Công Ty Tăng Minh Phát - Chuyên cung cấp giải pháp và thiết bị dùng trong công nghiệp

Công tắc giật dây dừng khẩn cấp cho phép người lao động có thể dừng băng tải từ bất cứ vị trị nào khi có xảy ra.

Thiết bị bảo vệ băng tải | Công tắc giật dây dừng khẩn cấp

1. Công tắc giật dây Matsushima

Matsushima - Japan

Công tắc giật dây dừng khẩn cấp

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position

  • Belt Conveyor Emergency-stop Switch
  • Reset system: Self-reset or Manual-reset
  • Required force of pull cord 49±9.8N(5 ± 1kgf)

Model : ELAW-21, ELAW-31, ELAW-61

2. Công tắc giật dây Kiepe

Kiepe - Đức

Công tắc giật dây dừng khẩn cấp

Conveyor belt systems must be able to be switched off along the conveyor path during emergencies. Therefore Pull Rope Switches are prescribed by standards as a supplementary protection measure.

PAS Kiepe 

  • PBT-Plastic - Pull Rope Lenght: up to 1x30m 
  • 1 NC

LRS Kiepe

  • Aluminum - Pull Rope Length: up to 1x 20m
  • LRS 004 : 2NC / 1NO (positive-break contacts)
  • LRS 022 : 2NC / 2NO (positive-break contacts)
  • LRS 031 : 3NC / 2NO (positive-break contacts)

PRS Kiepe

  • PBT-Plastic - Pull Rope Length: 2x50m
  • 2 NC / 1 changeover contact (positive-break contacts)

Hen 001, Hen 002

  • Aluminum - Pull Rope Length: up to 2x 50m
  • 3NC/ 3NO (positive-break contacts)

HEN 211 Kiepe

  • Aluminum - Pull Rope Length: up to 2x 50m
  • 2NC and 1NO for BUS-control (positive-break contacts)

HEN 221/231 Kiepe

  • Aluminum - Pull Rope Length: up to 2x 50m 
  • SafetyBus-Signal

NTS Kiepe

  • BMC-Plastic - Pull Rope Length: up to 2x 50m
  • 3 NC / 3 NO (positive-break contacts)

SEG Kiepe

  • Cast iron - Pull Rope Length: up to 2x 50m
  • 3 NC / 3 NO (positive-break contacts)

3. Công tắc giật dây Sitec

Sitec - Đức

Pull wire emergency stop switches for safe conveying systems

With the pull wire emergency stop switches from SiTec, an emergency stop can be triggered at any point along the conveyor belts. This makes work easy and safe !

Model : SNA, SND, SNSA

4. Công tắc giật dây Finetek

Finetek - Taiwan

Công tắc giật dây dừng khẩn cấp

SRS Series Safety Cable Pull Switch

  • Conventional belt conveyors
  • Underground, cable supported belt conveyors
  • Stacker/reclaimer conveyors
  • Ship loading/unloading systems
  • Tripper and shuttle conveyors
  • Bucket elevator speed safety management
  • Many others

Model : SRT20000, SRT2007D

The post Công tắc giật dây dừng khẩn cấp appeared first on thietbicongnghiepnang.com.

]]>
Công Ty Tăng Minh Phát - Chuyên cung cấp giải pháp và thiết bị dùng trong công nghiệp

Công tắc giật dây dừng khẩn cấp cho phép người lao động có thể dừng băng tải từ bất cứ vị trị nào khi có xảy ra.

Thiết bị bảo vệ băng tải | Công tắc giật dây dừng khẩn cấp

1. Công tắc giật dây Matsushima

Matsushima - Japan

Công tắc giật dây dừng khẩn cấp

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position

  • Belt Conveyor Emergency-stop Switch
  • Reset system: Self-reset or Manual-reset
  • Required force of pull cord 49±9.8N(5 ± 1kgf)

Model : ELAW-21, ELAW-31, ELAW-61

2. Công tắc giật dây Kiepe

Kiepe - Đức

Công tắc giật dây dừng khẩn cấp

Conveyor belt systems must be able to be switched off along the conveyor path during emergencies. Therefore Pull Rope Switches are prescribed by standards as a supplementary protection measure.

PAS Kiepe 

  • PBT-Plastic - Pull Rope Lenght: up to 1x30m 
  • 1 NC

LRS Kiepe

  • Aluminum - Pull Rope Length: up to 1x 20m
  • LRS 004 : 2NC / 1NO (positive-break contacts)
  • LRS 022 : 2NC / 2NO (positive-break contacts)
  • LRS 031 : 3NC / 2NO (positive-break contacts)

PRS Kiepe

  • PBT-Plastic - Pull Rope Length: 2x50m
  • 2 NC / 1 changeover contact (positive-break contacts)

Hen 001, Hen 002

  • Aluminum - Pull Rope Length: up to 2x 50m
  • 3NC/ 3NO (positive-break contacts)

HEN 211 Kiepe

  • Aluminum - Pull Rope Length: up to 2x 50m
  • 2NC and 1NO for BUS-control (positive-break contacts)

HEN 221/231 Kiepe

  • Aluminum - Pull Rope Length: up to 2x 50m 
  • SafetyBus-Signal

NTS Kiepe

  • BMC-Plastic - Pull Rope Length: up to 2x 50m
  • 3 NC / 3 NO (positive-break contacts)

SEG Kiepe

  • Cast iron - Pull Rope Length: up to 2x 50m
  • 3 NC / 3 NO (positive-break contacts)

3. Công tắc giật dây Sitec

Sitec - Đức

Pull wire emergency stop switches for safe conveying systems

With the pull wire emergency stop switches from SiTec, an emergency stop can be triggered at any point along the conveyor belts. This makes work easy and safe !

Model : SNA, SND, SNSA

4. Công tắc giật dây Finetek

Finetek - Taiwan

Công tắc giật dây dừng khẩn cấp

SRS Series Safety Cable Pull Switch

  • Conventional belt conveyors
  • Underground, cable supported belt conveyors
  • Stacker/reclaimer conveyors
  • Ship loading/unloading systems
  • Tripper and shuttle conveyors
  • Bucket elevator speed safety management
  • Many others

Model : SRT20000, SRT2007D

]]>
Máy đo độ cứng cao su tự động Teclock http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-tu-dong-teclock 2019-08-07 16:07:55 http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-tu-dong-teclock

Đại lý phân phối TECLOCK chính hãng-uy tín-chất lượng tại Việt Nam

Readmore

Đại lý phân phối Teclock chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

1. GX-02 Teclock | Automatic hardness tester

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

2. GS-610 Teclock | Automatic type Motor Driving Durometer Stand

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

3. GS-612 Teclock | Manual Operation type Durometer Stand with Speed Controller

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07(8  Accessory)

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07(9  Option)

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12(8  Option)

Trọng lượng GS 612 Teclock : 8.5 kg

4. GS-615 Teclock | Manual Operation type Durometer Stand

Trọng lượng GS 615 Teclock : 3.9 kg

5. GS-607 Teclock | Durometer Tetster

6. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±1

TECLOCK Standards

Type OO       ±2

ASTM D 2240

Measuring range

30~100 IRHD

0~100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100~200V/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

8. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

213

GS-721N

Type (E  AO)

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

313

GSD-721K

Type (E  AO)

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

(55-822gf)

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

(20.7-113.3gf)

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

388-1288mN

(9-131gf)

φ0.35

1

100

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

(0-4536gf)

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

(0-4536gf)

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

(56-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

(56-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

(56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

(55-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

(100-4500gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

(100-4500gf)

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

313

The post Máy đo độ cứng cao su tự động Teclock appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối Teclock chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

1. GX-02 Teclock | Automatic hardness tester

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

2. GS-610 Teclock | Automatic type Motor Driving Durometer Stand

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

3. GS-612 Teclock | Manual Operation type Durometer Stand with Speed Controller

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07(8  Accessory)

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07(9  Option)

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12(8  Option)

Trọng lượng GS 612 Teclock : 8.5 kg

4. GS-615 Teclock | Manual Operation type Durometer Stand

Trọng lượng GS 615 Teclock : 3.9 kg

5. GS-607 Teclock | Durometer Tetster

6. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±1

TECLOCK Standards

Type OO       ±2

ASTM D 2240

Measuring range

30~100 IRHD

0~100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100~200V/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

8. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

213

GS-721N

Type (E  AO)

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

313

GSD-721K

Type (E  AO)

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

(56.1-821.1gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

(55-822gf)

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

(20.7-113.3gf)

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

388-1288mN

(9-131gf)

φ0.35

1

100

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

(0-4536gf)

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

(0-4536gf)

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

(56-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

(56-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

(56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

(55-822gf)

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

(0-4533gf)

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

(100-4500gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

(100-4500gf)

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

(55-855gf)

Truncated Cone of φ 0.79

with 35° angle

2.54

313

]]>
Đồng hồ đo lưu lượng CS Instruments VA 550 http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-cs-instruments-va-550 2019-07-21 16:42:31 http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-cs-instruments-va-550

Đại lý phân phối hãng CS Instruments tại Việt Nam

Readmore

Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instrumen VA550 

Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

Special mechanical features:

  • Robust impact-proof aluminum die cast housing for the outdoor area IP 67
  • All medium-touching parts made from stainless steel 1,4571
  • As immersion sensor suitable for 3/4“ up to DN 500
  • On request with ATEX approval ATEX II 2G Ex d IIC T4
  • On request with DVGW approval for natural gas (up to 16 bar)
  • Pressure range up to 50 bar, special version up to 100 bar
  • Temperature range up to 180 °C
  • No moving parts, no wearout
  • Sensor tip very robust, easy to clean
  • Easy mounting and dismounting under pressure via 1/2“ ball valve
  • Housing twistable, display twistable by 180°
  • Safety ring for mounting and dismounting under pressure
  • Depth scale for precise installation

Special measurement technology features:

  • 4 values in the display: Nm³/h, Nm³, Nm/s, °C units freely adjustable
  • Min/max values and daily/hours/minutes average values freely adjustable
  • All measured values, settings like gas type, inner diameter, serial number and so on retrievable via Modbus RTU
  • Comprehensive diagnosis functions readable at the display or remote access via Modbus like e. g. exceeding of max/min values °C, calibration cycle, error codes, serial number, all parameters readable and adjustable
  • Notification in case of exceeding of the calibration cycle
  • Standard version accuracy 1.5 % of m.v. ± 0.3 % of f.s.
  • Precision version accuracy 1.0 % of m.v. ± 0.3 % of f.s. up to
  • 40 calibration points with certificate
  • Measuring span of 1 : 1000 (0.1 up to 224 m/s)
  • Configuration and diagnosis via display, hand-held instrument
  • PI 500, PC service software on-site
  • Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable
  • Reference conditions °C and mbar/hPa freely adjustable
  • Zero-point adjustment, leak flow volume suppression
  • Pressure loss negligible
  • Flow measurement in both directions via flow direction switch

The post Đồng hồ đo lưu lượng CS Instruments VA 550 appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instrumen VA550 

Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

Special mechanical features:

  • Robust impact-proof aluminum die cast housing for the outdoor area IP 67
  • All medium-touching parts made from stainless steel 1,4571
  • As immersion sensor suitable for 3/4“ up to DN 500
  • On request with ATEX approval ATEX II 2G Ex d IIC T4
  • On request with DVGW approval for natural gas (up to 16 bar)
  • Pressure range up to 50 bar, special version up to 100 bar
  • Temperature range up to 180 °C
  • No moving parts, no wearout
  • Sensor tip very robust, easy to clean
  • Easy mounting and dismounting under pressure via 1/2“ ball valve
  • Housing twistable, display twistable by 180°
  • Safety ring for mounting and dismounting under pressure
  • Depth scale for precise installation

Special measurement technology features:

  • 4 values in the display: Nm³/h, Nm³, Nm/s, °C units freely adjustable
  • Min/max values and daily/hours/minutes average values freely adjustable
  • All measured values, settings like gas type, inner diameter, serial number and so on retrievable via Modbus RTU
  • Comprehensive diagnosis functions readable at the display or remote access via Modbus like e. g. exceeding of max/min values °C, calibration cycle, error codes, serial number, all parameters readable and adjustable
  • Notification in case of exceeding of the calibration cycle
  • Standard version accuracy 1.5 % of m.v. ± 0.3 % of f.s.
  • Precision version accuracy 1.0 % of m.v. ± 0.3 % of f.s. up to
  • 40 calibration points with certificate
  • Measuring span of 1 : 1000 (0.1 up to 224 m/s)
  • Configuration and diagnosis via display, hand-held instrument
  • PI 500, PC service software on-site
  • Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable
  • Reference conditions °C and mbar/hPa freely adjustable
  • Zero-point adjustment, leak flow volume suppression
  • Pressure loss negligible
  • Flow measurement in both directions via flow direction switch
]]>
Đồng hồ đo lưu lượng TEK-FLUX 1400A Tek Trol http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-tekflux-1400a-tek-trol 2019-07-18 16:53:38 http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-tekflux-1400a-tek-trol

Nhà phân phối đồng hồ đo lưu lượng TEK-TROL Việt Nam

Readmore

Electromagnetic Flowmeters 

Thiết bị đo lưu lượng Tek Trol | Tek Trol Vietnam

TEK-FLUX 1400A SERIES ELECTROMAGNETIC FLOWMETER

Đồng hồ đo lưu lượng nước sạch

Tek-Flux 1400A Electromagnetic flowmeter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flowmeter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

Features

  • Wide range of nominal diameter Size ½” to 28” (15 mm to 700 mm) with IP68 protection
  • Easy maintenance due to no moving parts
  • Uninfluenced by temperature, pressure, viscosity, and density
  • Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid
  • High turndown ratio up to 1:100
  • It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
  • Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit
  • Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption
  • Lining and electrode available in various materials which can measure nearly all conductive fluids
  • It has multiple signal output, pulse, Modbus RS485 or HART® or 4 to 20 mA
  • The power supply system has good voltage vibration ability
  • Meters Batching and Blending Totalization
Service Compatible conductive liquids
Measuring Range For flow range please refer the catalog
Lining Materials PTFE and Synthetic rubber
Electrode Material Stainless Steel, Hastealloy C
Accuracy ±0.5%
Repeatability 0.15%
Ambient Temperature Limits

Sensor (Remote Mount): -4 °F to 158 °F (-20 °C to 70 °C)

Converter: -4 °F to 122 °F (-20 °C to 50 °C)

Integral Type: 14 °F to 122 °F (-10 °C to 50 °C)

Ambient Magnetic Field ≤ 400 A/m
Pressure Limit ≤ 150 PSI
Mounting Orientation Horizontal or vertical
Process Connection #150 ANSI or AWWA flanges
Output Signal Pulse and 4 to 20 mA or Modbus RS485 or 4 to 20 mA with HART
Power Requirements 18 VDC to 28 VDC or 85 VAC to 220 VAC
Conductivity ≥5 μs/cm
Enclosure Rating IP68
Weight Refer catalog for net weight
Agency Approvals CE

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo lưu lượng TEK-FLUX 1400A Tek Trol appeared first on thietbicongnghiepnang.com.

]]>
Electromagnetic Flowmeters 

Thiết bị đo lưu lượng Tek Trol | Tek Trol Vietnam

TEK-FLUX 1400A SERIES ELECTROMAGNETIC FLOWMETER

Đồng hồ đo lưu lượng nước sạch

Tek-Flux 1400A Electromagnetic flowmeter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flowmeter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

Features

  • Wide range of nominal diameter Size ½” to 28” (15 mm to 700 mm) with IP68 protection
  • Easy maintenance due to no moving parts
  • Uninfluenced by temperature, pressure, viscosity, and density
  • Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid
  • High turndown ratio up to 1:100
  • It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
  • Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit
  • Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption
  • Lining and electrode available in various materials which can measure nearly all conductive fluids
  • It has multiple signal output, pulse, Modbus RS485 or HART® or 4 to 20 mA
  • The power supply system has good voltage vibration ability
  • Meters Batching and Blending Totalization
Service Compatible conductive liquids
Measuring Range For flow range please refer the catalog
Lining Materials PTFE and Synthetic rubber
Electrode Material Stainless Steel, Hastealloy C
Accuracy ±0.5%
Repeatability 0.15%
Ambient Temperature Limits

Sensor (Remote Mount): -4 °F to 158 °F (-20 °C to 70 °C)

Converter: -4 °F to 122 °F (-20 °C to 50 °C)

Integral Type: 14 °F to 122 °F (-10 °C to 50 °C)

Ambient Magnetic Field ≤ 400 A/m
Pressure Limit ≤ 150 PSI
Mounting Orientation Horizontal or vertical
Process Connection #150 ANSI or AWWA flanges
Output Signal Pulse and 4 to 20 mA or Modbus RS485 or 4 to 20 mA with HART
Power Requirements 18 VDC to 28 VDC or 85 VAC to 220 VAC
Conductivity ≥5 μs/cm
Enclosure Rating IP68
Weight Refer catalog for net weight
Agency Approvals CE

Xem thêm chi tiết : TẠI ĐÂY

]]>
Đồng hồ đo lưu lượng kiểu Vortex Kometer http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-kieu-vortex-kometer 2019-07-18 08:49:46 http://thietbicongnghiepnang.com/dong-ho-do-luu-luong-kieu-vortex-kometer

Đại lý phân phối Kometer tại Việt Nam

Readmore

Kometer Vietnam

Đồng hồ đo lưu lượng nước, khí, chất lỏng Kometer

Vortex Flowmeter

1. Đồng hồ đo lưu lượng KTVP-750 Kometer

KTVP-750 is a flow meter of eddy-current type with a temperature and a pressure sensor built in. With a temperature and pressure compensating function integrated in flow measuring mechanism in the same body, it can be applied to an environment with the piping in a floating condition in various industrial sites.

 This product is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.

 It is possible to supply with the tube size reduced compared with the connection size and possible to provide flange type or flangeless wafer type to cope with various piping conditions.

FEATURE

  • Temperature, pressure, and flow sensors all-in- one product
  • Installation and maintenance costs are lower than those of other products
  • Flange type or space-saving wafer type is selectively available
  • Reduce Tube Size compared to Connection Size
  • Excellent durability and long life thanks to no driving part present
  • Applicable to varied fluids such as liquids, gases, steam, etc.
  • Wide range of flow measurement and relatively low pressure loss

Thông số kĩ thuật :

Size

15A (1/2") - 300A (12")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Wafer type

Measuring Range

Water - 0.7 m3/h – 1800 m3/h

Gas - 3.5 Nm3/h – 11000 Nm3/h

Accuracy

±1.0 % F.S (Option ±0.5 %)

Fluid Temperature

-40 ℃ ~ 250 ℃ (Option 350 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max Pressure

20 kgf/㎠.G (Option 40 kgf/㎠.G)

Power Supply

DC 24 V (2-Wire)

Display

LCD Display (Flowrate, Totalizer, Temperature, Pressure)

Output

DC 4-20 mA, Pulse (Option RS-485)

Protection Class

Ex d IIC T5 / IP67

Bảng tra lưu lượng

Size

Max. Flow ranges  (kg/h)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

39

57

92

126

160

194

20

3/4"

55

81

131

180

229

277

25

1"

78

113

183

252

320

387

40

1-1/2"

244

357

577

792

1005

1217

50

2"

355

519

839

1152

1462

1771

65

2-1/2"

532

778

1258

1728

2194

2656

80

3"

710

1037

1677

2304

2925

3542

100

4"

1220

1783

2883

3960

5027

6087

125

5"

1885

2756

4456

6120

7769

9408

150

6"

2484

3631

5871

8064

10237

12396

200

8"

5501

8040

13000

17856

22667

27449

250

10"

8872

12968

20968

28800

36560

44272

300

12"

12199

17831

28831

39600

50270

60874

2. Đồng hồ đo lưu lượng KTVP-750 ( Wafer Type)

 KTVP-750 can be used in industrial sites such as petroleum gas, power plants, pharmaceuticals and pulp & paper, and has no moving parts, so it is durable and has a long service life. It can be provided by reducing the tube size compared to the connection size, and can also be provided as a flange type or a flangeless wafer type to meet various piping conditions.

Normal flow range :

Size

Water (m3/h)

Gas (Nm3/h)

*1 atm / 20℃ 기준

mm

inch

15

1/2"

0.7  - 7

3.5  - 35

20

3/4"

1  - 10

5  - 50

25

1"

1.6  - 16

7  - 70

40

1-1/2"

2.5  - 25

22  - 220

50

2"

3.5  - 35

32  - 320

65

2-1/2"

6.8  - 68

48  - 480

80

3"

10  - 100

64  - 640

100

4"

15  - 150

110  - 1100

125

5"

27.5  - 275

170  - 1700

150

6"

40  - 400

224  - 2240

200

8"

80  - 800

496  - 4960

250

10"

120  - 1,200

800  - 8000

300

12"

180  - 1,800

1100  - 11000

 Bảng tra lưu lượng khí

Size

Max. Flow ranges (Nm3/h) (1 atm/20 ℃)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

80

110

180

250

310

380

20

3/4"

110

150

250

350

440

540

25

1"

150

210

350

480

620

760

40

1-1/2"

440

650

1080

1510

1930

2360

50

2"

630

950

1570

2190

2810

3420

65

2-1/2"

950

1420

2350

3270

4200

5130

80

3"

1270

1890

3130

4360

5600

6840

100

4"

2170

3240

5370

7500

9620

11750

125

5"

3350

5000

8290

11580

14870

18160

150

6"

4420

6580

10920

15260

19590

23930

200

8"

9770

14570

24170

33770

43370

52970

250

10"

15750

23490

38980

54470

69950

85440

300

12"

21650

32300

53590

74890

96180

117470

Bảng tra lưu lượng hơi nước :

Size

Max. Flow ranges  (kg/h)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

39

57

92

126

160

194

20

3/4"

55

81

131

180

229

277

25

1"

78

113

183

252

320

387

40

1-1/2"

244

357

577

792

1005

1217

50

2"

355

519

839

1152

1462

1771

65

2-1/2"

532

778

1258

1728

2194

2656

80

3"

710

1037

1677

2304

2925

3542

100

4"

1220

1783

2883

3960

5027

6087

125

5"

1885

2756

4456

6120

7769

9408

150

6"

2484

3631

5871

8064

10237

12396

200

8"

5501

8040

13000

17856

22667

27449

250

10"

8872

12968

20968

28800

36560

44272

300

12"

12199

17831

28831

39600

50270

60874

3. Đồng hồ đo lưu lượng KTVP-700 Kometer

KTV-700 is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.

 This product is applicable to industrial sites such as oil or gas fields, power plants, pharmaceutical, pulp, and paper-making plants while maintaining excellent durability and a long life with no driving part needed.

 It is possible to supply with the tube size reduced compared with the connection size and possible to provide flange type or flangeless wafer type to cope with various piping conditions.

4. Đồng hồ đo lưu lượng KTVP-700 Wafer Type

Xem thêm chi tiết : TẠI ĐÂY 

The post Đồng hồ đo lưu lượng kiểu Vortex Kometer appeared first on thietbicongnghiepnang.com.

]]>
Kometer Vietnam

Đồng hồ đo lưu lượng nước, khí, chất lỏng Kometer

Vortex Flowmeter

1. Đồng hồ đo lưu lượng KTVP-750 Kometer

KTVP-750 is a flow meter of eddy-current type with a temperature and a pressure sensor built in. With a temperature and pressure compensating function integrated in flow measuring mechanism in the same body, it can be applied to an environment with the piping in a floating condition in various industrial sites.

 This product is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.

 It is possible to supply with the tube size reduced compared with the connection size and possible to provide flange type or flangeless wafer type to cope with various piping conditions.

FEATURE

  • Temperature, pressure, and flow sensors all-in- one product
  • Installation and maintenance costs are lower than those of other products
  • Flange type or space-saving wafer type is selectively available
  • Reduce Tube Size compared to Connection Size
  • Excellent durability and long life thanks to no driving part present
  • Applicable to varied fluids such as liquids, gases, steam, etc.
  • Wide range of flow measurement and relatively low pressure loss

Thông số kĩ thuật :

Size

15A (1/2") - 300A (12")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Wafer type

Measuring Range

Water - 0.7 m3/h – 1800 m3/h

Gas - 3.5 Nm3/h – 11000 Nm3/h

Accuracy

±1.0 % F.S (Option ±0.5 %)

Fluid Temperature

-40 ℃ ~ 250 ℃ (Option 350 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max Pressure

20 kgf/㎠.G (Option 40 kgf/㎠.G)

Power Supply

DC 24 V (2-Wire)

Display

LCD Display (Flowrate, Totalizer, Temperature, Pressure)

Output

DC 4-20 mA, Pulse (Option RS-485)

Protection Class

Ex d IIC T5 / IP67

Bảng tra lưu lượng

Size

Max. Flow ranges  (kg/h)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

39

57

92

126

160

194

20

3/4"

55

81

131

180

229

277

25

1"

78

113

183

252

320

387

40

1-1/2"

244

357

577

792

1005

1217

50

2"

355

519

839

1152

1462

1771

65

2-1/2"

532

778

1258

1728

2194

2656

80

3"

710

1037

1677

2304

2925

3542

100

4"

1220

1783

2883

3960

5027

6087

125

5"

1885

2756

4456

6120

7769

9408

150

6"

2484

3631

5871

8064

10237

12396

200

8"

5501

8040

13000

17856

22667

27449

250

10"

8872

12968

20968

28800

36560

44272

300

12"

12199

17831

28831

39600

50270

60874

2. Đồng hồ đo lưu lượng KTVP-750 ( Wafer Type)

 KTVP-750 can be used in industrial sites such as petroleum gas, power plants, pharmaceuticals and pulp & paper, and has no moving parts, so it is durable and has a long service life. It can be provided by reducing the tube size compared to the connection size, and can also be provided as a flange type or a flangeless wafer type to meet various piping conditions.

Normal flow range :

Size

Water (m3/h)

Gas (Nm3/h)

*1 atm / 20℃ 기준

mm

inch

15

1/2"

0.7  - 7

3.5  - 35

20

3/4"

1  - 10

5  - 50

25

1"

1.6  - 16

7  - 70

40

1-1/2"

2.5  - 25

22  - 220

50

2"

3.5  - 35

32  - 320

65

2-1/2"

6.8  - 68

48  - 480

80

3"

10  - 100

64  - 640

100

4"

15  - 150

110  - 1100

125

5"

27.5  - 275

170  - 1700

150

6"

40  - 400

224  - 2240

200

8"

80  - 800

496  - 4960

250

10"

120  - 1,200

800  - 8000

300

12"

180  - 1,800

1100  - 11000

 Bảng tra lưu lượng khí

Size

Max. Flow ranges (Nm3/h) (1 atm/20 ℃)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

80

110

180

250

310

380

20

3/4"

110

150

250

350

440

540

25

1"

150

210

350

480

620

760

40

1-1/2"

440

650

1080

1510

1930

2360

50

2"

630

950

1570

2190

2810

3420

65

2-1/2"

950

1420

2350

3270

4200

5130

80

3"

1270

1890

3130

4360

5600

6840

100

4"

2170

3240

5370

7500

9620

11750

125

5"

3350

5000

8290

11580

14870

18160

150

6"

4420

6580

10920

15260

19590

23930

200

8"

9770

14570

24170

33770

43370

52970

250

10"

15750

23490

38980

54470

69950

85440

300

12"

21650

32300

53590

74890

96180

117470

Bảng tra lưu lượng hơi nước :

Size

Max. Flow ranges  (kg/h)

mm

inch

1 kg/cm2.G

2 kg/cm2.G

4 kg/cm2.G

6 kg/cm2.G

8 kg/cm2.G

10 kg/cm2.G

15

1/2"

39

57

92

126

160

194

20

3/4"

55

81

131

180

229

277

25

1"

78

113

183

252

320

387

40

1-1/2"

244

357

577

792

1005

1217

50

2"

355

519

839

1152

1462

1771

65

2-1/2"

532

778

1258

1728

2194

2656

80

3"

710

1037

1677

2304

2925

3542

100

4"

1220

1783

2883

3960

5027

6087

125

5"

1885

2756

4456

6120

7769

9408

150

6"

2484

3631

5871

8064

10237

12396

200

8"

5501

8040

13000

17856

22667

27449

250

10"

8872

12968

20968

28800

36560

44272

300

12"

12199

17831

28831

39600

50270

60874

3. Đồng hồ đo lưu lượng KTVP-700 Kometer

KTV-700 is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.

 This product is applicable to industrial sites such as oil or gas fields, power plants, pharmaceutical, pulp, and paper-making plants while maintaining excellent durability and a long life with no driving part needed.

 It is possible to supply with the tube size reduced compared with the connection size and possible to provide flange type or flangeless wafer type to cope with various piping conditions.

4. Đồng hồ đo lưu lượng KTVP-700 Wafer Type

Xem thêm chi tiết : TẠI ĐÂY 

]]>
Máy đo lực vặn nắp chai - TMP VIETNAM http://thietbicongnghiepnang.com/may-do-luc-van-nap-chai-tmp-vietnam 2019-07-05 15:29:22 http://thietbicongnghiepnang.com/may-do-luc-van-nap-chai-tmp-vietnam

Thiết bị phòng LAB, thiết bị đo lực vặn nắp chai hãng Mark 10, AT2E

Readmore

Công Ty Tăng Minh Phát - Chuyên cung cấp thiết bị và giải pháp cho phòng thí nghiệm

1. Máy đo lực vặn nắp chai Mark 10

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Digital Cap Torque Testers 

Model No.

lbFin

ozFin

kgFcm

Ncm

Nm

MTT01-12

12 x 0.005

192 x 0.1

14 x 0.01

135 x 0.1

1.35 x 0.001

MTT01-25

25 x 0.01

400 x 0.2

28 x 0.02

290 x 0.2

2.9 x 0.002

MTT01-50

5 0 x 0.02

800 x 0.5

58 x 0.05

570 x 0.5

5.7 x 0.005

MTT01-100

100 x 0.05

1600 x 1

116 x 0.1

1150 x 0.5

11.5 x 0.005

Features

  • High-speed 7,000 Hz sampling rate accurately captures peak torque values
  • First / second peak detection for slip and breakaway torques in tamper evident closures
  • Moveable posts and other available gripping options accommodate a wide range of sample shapes and sizes
  • USB, RS-232, Mitutoyo, and analog outputs
  • Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
  • 1,000-point data memory with statistics and outputs
  • Programmable set point indicators and outputs for pass/ fail determination
  • Password protection prevents unauthorized changes
  • MESURTM Lite data collection software included

Model : MTT01-12, MTT01-25, MTT01-50, MTT01-100

Xem chi tiết về máy đo lực vặn nắp chai của hãng Mark-10 : TẠI ĐÂY

2. Máy đo lực vặn nắp chai AT2E

a. Máy đo lực vặn nắp chai TMV5 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • Touch screen display
  • Measures opening and closing directions
  • 0.080 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.5 % of full scale
  • 100 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 20 operators memory
  • Setting of files by administrator code
  • Store and transfer up to 999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • 1 RS232 output for software & 1 printer output
  • Language: French / Italian / Spanish / English
  • Delivered with COFRAC calibration certificate
  • 110 / 230 V – 50/60 Hz

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Cosmetic
  • Optional battery
  • Dimensions: 300 (L) x 180 (W) x 200 (H) mm
  • Weight: 7 kg

b. Máy đo lực vặn nắp chai TMV7 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • 7″ Touch screen color display
  • Measures opening and closing directions
  • 0.030 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Special mode RELEASING & BREAKING Torque
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.2 % of full scale
  • 30 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 10 operators memory
  • 8 Access levels with code (op, Super op, admin)
  • Storage and transfer up to 9999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • Last measure curve
  • 2 outputs: RS232 & mini USB (software & printer)
  • Language: French / Italian / Spanish / English
  • Delivered with ASTM calibration certificate
  • 110 / 230 V – 50/60 Hz
  • Transportation case

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Fast squeeze system
  • Dimensions: 370 x 215 x150 to 200 mm
  • Weight: 7 kg

Ngoài ra, Tăng Minh Phát còn cung cấp máy đo lực vặn nắp chai tự động

Hãy liên hệ với chúng tối để biết thêm thông tin chi tiết

The post Máy đo lực vặn nắp chai - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]>
Công Ty Tăng Minh Phát - Chuyên cung cấp thiết bị và giải pháp cho phòng thí nghiệm

1. Máy đo lực vặn nắp chai Mark 10

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Digital Cap Torque Testers 

Model No.

lbFin

ozFin

kgFcm

Ncm

Nm

MTT01-12

12 x 0.005

192 x 0.1

14 x 0.01

135 x 0.1

1.35 x 0.001

MTT01-25

25 x 0.01

400 x 0.2

28 x 0.02

290 x 0.2

2.9 x 0.002

MTT01-50

5 0 x 0.02

800 x 0.5

58 x 0.05

570 x 0.5

5.7 x 0.005

MTT01-100

100 x 0.05

1600 x 1

116 x 0.1

1150 x 0.5

11.5 x 0.005

Features

  • High-speed 7,000 Hz sampling rate accurately captures peak torque values
  • First / second peak detection for slip and breakaway torques in tamper evident closures
  • Moveable posts and other available gripping options accommodate a wide range of sample shapes and sizes
  • USB, RS-232, Mitutoyo, and analog outputs
  • Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
  • 1,000-point data memory with statistics and outputs
  • Programmable set point indicators and outputs for pass/ fail determination
  • Password protection prevents unauthorized changes
  • MESURTM Lite data collection software included

Model : MTT01-12, MTT01-25, MTT01-50, MTT01-100

Xem chi tiết về máy đo lực vặn nắp chai của hãng Mark-10 : TẠI ĐÂY

2. Máy đo lực vặn nắp chai AT2E

a. Máy đo lực vặn nắp chai TMV5 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • Touch screen display
  • Measures opening and closing directions
  • 0.080 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.5 % of full scale
  • 100 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 20 operators memory
  • Setting of files by administrator code
  • Store and transfer up to 999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • 1 RS232 output for software & 1 printer output
  • Language: French / Italian / Spanish / English
  • Delivered with COFRAC calibration certificate
  • 110 / 230 V – 50/60 Hz

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Cosmetic
  • Optional battery
  • Dimensions: 300 (L) x 180 (W) x 200 (H) mm
  • Weight: 7 kg

b. Máy đo lực vặn nắp chai TMV7 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • 7″ Touch screen color display
  • Measures opening and closing directions
  • 0.030 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Special mode RELEASING & BREAKING Torque
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.2 % of full scale
  • 30 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 10 operators memory
  • 8 Access levels with code (op, Super op, admin)
  • Storage and transfer up to 9999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • Last measure curve
  • 2 outputs: RS232 & mini USB (software & printer)
  • Language: French / Italian / Spanish / English
  • Delivered with ASTM calibration certificate
  • 110 / 230 V – 50/60 Hz
  • Transportation case

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Fast squeeze system
  • Dimensions: 370 x 215 x150 to 200 mm
  • Weight: 7 kg

Ngoài ra, Tăng Minh Phát còn cung cấp máy đo lực vặn nắp chai tự động

Hãy liên hệ với chúng tối để biết thêm thông tin chi tiết

]]>
Bộ điều khiển PID PX2CHZ00 Red Lion http://thietbicongnghiepnang.com/bo-dieu-khien-pid-px2chz00-red-lion 2019-06-12 11:50:07 http://thietbicongnghiepnang.com/bo-dieu-khien-pid-px2chz00-red-lion

Đại lý cung cấp Red Lion tại Việt Nam

Readmore

Đại lý cung cấp RED LION Việt Nam | Redlion VietNam

Bộ điều khiển PID nhiệt độ Red Lion

TEMPERATURE/PROCESS PROFILE CONTROLLER, 1/8 DIN HORIZONTAL

PAX2C PID controllers offer many features and performance capabilities that are not available on standard PID controllers. The programmable dual line display with units’ indication and bar graph display allows the user to customize the display to the application. Four programmable universal displays and seven programmable color zones provide operators a quick visual refer of application parameters.

  • PID Control With Reduced Overshoot
  • Universal Input for Process, Temperature, Voltage, Current And Resistance
  • Programmable Dual Line Display With Units And Bar Graph
  • Four Programmable Universal Annunciators
  • Tri-Color Display, With 7 Programmable Color Zones
  • Field Installable Option Cards for Setpoints, Communication and Retransmitted Analog Output
  • Support for FlexCards, including Second Analog Input, Remote Setpoint, Heater Current Monitor or a 2nd PID Controller
  • Ramp/Soak Capability, up to 16 profiles with 20 steps each
  • Up To 16 Alarms With Boolean Logic Functionality
  • Built-In USB Programming Port Enabling Unit Configuration With Crimson® Programming Software
  • NEMA 4X/IP65 Sealed Front Bezel

The post Bộ điều khiển PID PX2CHZ00 Red Lion appeared first on thietbicongnghiepnang.com.

]]>
Đại lý cung cấp RED LION Việt Nam | Redlion VietNam

Bộ điều khiển PID nhiệt độ Red Lion

TEMPERATURE/PROCESS PROFILE CONTROLLER, 1/8 DIN HORIZONTAL

PAX2C PID controllers offer many features and performance capabilities that are not available on standard PID controllers. The programmable dual line display with units’ indication and bar graph display allows the user to customize the display to the application. Four programmable universal displays and seven programmable color zones provide operators a quick visual refer of application parameters.

  • PID Control With Reduced Overshoot
  • Universal Input for Process, Temperature, Voltage, Current And Resistance
  • Programmable Dual Line Display With Units And Bar Graph
  • Four Programmable Universal Annunciators
  • Tri-Color Display, With 7 Programmable Color Zones
  • Field Installable Option Cards for Setpoints, Communication and Retransmitted Analog Output
  • Support for FlexCards, including Second Analog Input, Remote Setpoint, Heater Current Monitor or a 2nd PID Controller
  • Ramp/Soak Capability, up to 16 profiles with 20 steps each
  • Up To 16 Alarms With Boolean Logic Functionality
  • Built-In USB Programming Port Enabling Unit Configuration With Crimson® Programming Software
  • NEMA 4X/IP65 Sealed Front Bezel
]]>
Type 2400 Burkert | Van solenoid Burkert http://thietbicongnghiepnang.com/type-2400-burkert-van-solenoid-burkert 2019-06-11 09:34:22 http://thietbicongnghiepnang.com/type-2400-burkert-van-solenoid-burkert

TMPVIETNAM - Nhà phân phối VAN ĐIỆN TỪ BURKERT chính hãng tại Việt Nam

Readmore

Nhà phân phối Burkert Việt Nam | Van Burkert Vietnam

Van điện từ Burkert ( Solenoid Valve Burkert )

Type 2400 - 2/2 way Solenoid Valve Servo-operated for High Pressure

The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control. It is designed for high pressures. The speciality of this valve design lies in the layout of the seat and sealing element. Anadditional radial seal make very good sealing possible. The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.

  • Push-over solenoid system
  • Special versions, up to 250 bar, up to DN 12
  • Stainless steel body

Note : 

The type 2400 is not available anymore since 10/1/18.

The following types are (can be a little bit different because of the update): 6240

Please contact us regarding a successor product.

The post Type 2400 Burkert | Van solenoid Burkert appeared first on thietbicongnghiepnang.com.

]]>
Nhà phân phối Burkert Việt Nam | Van Burkert Vietnam

Van điện từ Burkert ( Solenoid Valve Burkert )

Type 2400 - 2/2 way Solenoid Valve Servo-operated for High Pressure

The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control. It is designed for high pressures. The speciality of this valve design lies in the layout of the seat and sealing element. Anadditional radial seal make very good sealing possible. The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.

  • Push-over solenoid system
  • Special versions, up to 250 bar, up to DN 12
  • Stainless steel body

Note : 

The type 2400 is not available anymore since 10/1/18.

The following types are (can be a little bit different because of the update): 6240

Please contact us regarding a successor product.

]]>
VEGAPULS 67 | Cảm biến đo mức Vega http://thietbicongnghiepnang.com/vegapuls-67-cam-bien-do-muc-vega 2019-06-07 23:02:19 http://thietbicongnghiepnang.com/vegapuls-67-cam-bien-do-muc-vega

Công Ty Tăng Minh Phát - Nhà phân phối cảm biến đo mức VEA tại Việt Nam, VEGAPULS

Readmore

Nhà cung cấp VEGAPULS tại Việt Nam | VEGA VIETNAM

Cảm biến đo mức chất lỏng VEGA | VEGAPULS 67

The radar level sensor VEGAPULS 67 is used for cost-effective level measurement of bulk solids. It delivers continuously  reliable measurement data on the levels of bulk solids in silos up to 15 m high as well as in crushers or small containers. It is the economical solution for simple bulk solids measurement in the food industry as well as in plastics processing, in steelmaking and in the construction industry. VEGAPULS 67 is actually the "little brother" of VEGAPULS 68, the radar level sensor for bulk solids measurement under difficult process conditions.

Radar sensor for continuous level measurement of bulk solids

For simple process conditions

Application area

Simple, versatile mounting options for the plastic antenna using flange or mounting bracket offer an economical solution.

The VEGAPULS 67 is a sensor for continuous level measurement of bulk solids under simple process conditions. It is suitable for smaller silos and vessels. The VEGAPULS 67 is an economical solution through its versatile and simple mounting options. The encapsulated antenna system ensures maintenance-free permanent operation even with strong buildup.

Your benefit

  • High plant availability, because wear and maintenance-free
  • Maintenance-free operation through non-contact measuring principle
  • Reliable measurement independent of vapour, dust and noise

Technical specifications

Measuring range - Distance : 15 m

Process temperature : -40 ... 80 °C

Process pressure : -1 ... 2 bar

Accuracy : ± 2 mm

Version : with plastic horn antenna ø 80 mm

Materials, wetted parts : PP

Flange connection : ≥ DN80, ≥ 3"

Housing material

  • Plastic
  • Aluminium
  • Stainless steel (precision casting)
  • Stainless steel (electropolished)

Protection rating

  • IP 66/IP 68 (0.2 bar)
  • IP 66/IP 67
  • IP 66/IP 68 (1 bar)

Output

  • Profibus PA
  • Foundation Fieldbus
  • 4 … 20 mA/HART - two-wire
  • Modbus
  • 4 … 20 mA/HART - four-wire

Ambient temperature : -40 ... 80 °C

The post VEGAPULS 67 | Cảm biến đo mức Vega appeared first on thietbicongnghiepnang.com.

]]>
Nhà cung cấp VEGAPULS tại Việt Nam | VEGA VIETNAM

Cảm biến đo mức chất lỏng VEGA | VEGAPULS 67

The radar level sensor VEGAPULS 67 is used for cost-effective level measurement of bulk solids. It delivers continuously  reliable measurement data on the levels of bulk solids in silos up to 15 m high as well as in crushers or small containers. It is the economical solution for simple bulk solids measurement in the food industry as well as in plastics processing, in steelmaking and in the construction industry. VEGAPULS 67 is actually the "little brother" of VEGAPULS 68, the radar level sensor for bulk solids measurement under difficult process conditions.

Radar sensor for continuous level measurement of bulk solids

For simple process conditions

Application area

Simple, versatile mounting options for the plastic antenna using flange or mounting bracket offer an economical solution.

The VEGAPULS 67 is a sensor for continuous level measurement of bulk solids under simple process conditions. It is suitable for smaller silos and vessels. The VEGAPULS 67 is an economical solution through its versatile and simple mounting options. The encapsulated antenna system ensures maintenance-free permanent operation even with strong buildup.

Your benefit

  • High plant availability, because wear and maintenance-free
  • Maintenance-free operation through non-contact measuring principle
  • Reliable measurement independent of vapour, dust and noise

Technical specifications

Measuring range - Distance : 15 m

Process temperature : -40 ... 80 °C

Process pressure : -1 ... 2 bar

Accuracy : ± 2 mm

Version : with plastic horn antenna ø 80 mm

Materials, wetted parts : PP

Flange connection : ≥ DN80, ≥ 3"

Housing material

  • Plastic
  • Aluminium
  • Stainless steel (precision casting)
  • Stainless steel (electropolished)

Protection rating

  • IP 66/IP 68 (0.2 bar)
  • IP 66/IP 67
  • IP 66/IP 68 (1 bar)

Output

  • Profibus PA
  • Foundation Fieldbus
  • 4 … 20 mA/HART - two-wire
  • Modbus
  • 4 … 20 mA/HART - four-wire

Ambient temperature : -40 ... 80 °C

]]>
VEGAPULS 66 | Cảm biến Vega http://thietbicongnghiepnang.com/vegapuls-66-cam-bien-vega 2019-06-07 23:02:03 http://thietbicongnghiepnang.com/vegapuls-66-cam-bien-vega

Công Ty Tăng Minh Phát - Nhà phân phối cảm biến đo mức VEA tại Việt Nam, VEGAPULS

Readmore

Nhà cung cấp VEGAPULS tại Việt Nam | VEGA VIETNAM

Cảm biến radar VEGA | VEGAPULS 66

The application areas for the radar level instrument VEGAPULS 66, which can handle the toughest process conditions, are found mainly in the chemical industry, in environmental and recycling technology and in the petrochemical sector. The non-contact radar level instrument is used in steam drums (process heat generation) as well as in mud pits, process vessels and storage tanks.

Radar sensor for continuous level measurement of liquids

In extreme temperatures and pressures

Application area

The extended selection of process fittings and materials allows use in extreme temperature and pressure ranges.

The VEGAPULS 66 is a sensor for continuous level measurement of liquids under arduous process conditions. It is suitable for applications in storage tanks, process vessels or standpipes. The VEGAPULS 66 can be used universally thanks to different antenna versions.

Your benefit

  • High plant availability, because wear and maintenance-free
  • Maintenance-free operation through non-contact measuring principle
  • Reliable measurement independent of process conditions

 

Technical specifications

Measuring range - Distance : 35 m

Process temperature : -60 ... 400 °C

Process pressure : -1 ... 160 bar

Accuracy : ± 8 mm

Version

  • for separate horn antenna
  • with horn antenna ø 48 mm
  • with horn antenna ø 75 mm
  • with horn antenna ø 95 mm
  • with ø 52 mm standpipe
  • for separate standpipe
  • with horn antenna ø 140 mm enamelled
  • with horn antenna ø 145 mm
  • with horn antenna ø 160 mm enamelled
  • with horn antenna ø 195 mm
  • with horn antenna ø 240 mm

Materials, wetted parts :

  • 316L
  • Alloy C22 (2.4602)
  • Enamel
  • Alloy C276 (2.4819)
  • 316
  • 1.4435

Flange connection : ≥ DN50, ≥ 2"

Seal material

  • EPDM
  • FKM
  • FFKM
  • graphit and ceramic
  • PTFE
  • Silicone FEP coated

Housing material

  • Plastic
  • Aluminium
  • Stainless steel (precision casting)
  • Stainless steel (electropolished)

Protection rating

  • IP 66/IP 68 (0.2 bar)
  • IP 66/IP 67
  • IP 66/IP 68 (1 bar)

Output

  • Profibus PA
  • Foundation Fieldbus
  • 4 … 20 mA/HART - two-wire
  • Modbus
  • 4 … 20 mA/HART - four-wire

Ambient temperature : -40 ... 80 °C

The post VEGAPULS 66 | Cảm biến Vega appeared first on thietbicongnghiepnang.com.

]]>
Nhà cung cấp VEGAPULS tại Việt Nam | VEGA VIETNAM

Cảm biến radar VEGA | VEGAPULS 66

The application areas for the radar level instrument VEGAPULS 66, which can handle the toughest process conditions, are found mainly in the chemical industry, in environmental and recycling technology and in the petrochemical sector. The non-contact radar level instrument is used in steam drums (process heat generation) as well as in mud pits, process vessels and storage tanks.

Radar sensor for continuous level measurement of liquids

In extreme temperatures and pressures

Application area

The extended selection of process fittings and materials allows use in extreme temperature and pressure ranges.

The VEGAPULS 66 is a sensor for continuous level measurement of liquids under arduous process conditions. It is suitable for applications in storage tanks, process vessels or standpipes. The VEGAPULS 66 can be used universally thanks to different antenna versions.

Your benefit

  • High plant availability, because wear and maintenance-free
  • Maintenance-free operation through non-contact measuring principle
  • Reliable measurement independent of process conditions

 

Technical specifications

Measuring range - Distance : 35 m

Process temperature : -60 ... 400 °C

Process pressure : -1 ... 160 bar

Accuracy : ± 8 mm

Version

  • for separate horn antenna
  • with horn antenna ø 48 mm
  • with horn antenna ø 75 mm
  • with horn antenna ø 95 mm
  • with ø 52 mm standpipe
  • for separate standpipe
  • with horn antenna ø 140 mm enamelled
  • with horn antenna ø 145 mm
  • with horn antenna ø 160 mm enamelled
  • with horn antenna ø 195 mm
  • with horn antenna ø 240 mm

Materials, wetted parts :

  • 316L
  • Alloy C22 (2.4602)
  • Enamel
  • Alloy C276 (2.4819)
  • 316
  • 1.4435

Flange connection : ≥ DN50, ≥ 2"

Seal material

  • EPDM
  • FKM
  • FFKM
  • graphit and ceramic
  • PTFE
  • Silicone FEP coated

Housing material

  • Plastic
  • Aluminium
  • Stainless steel (precision casting)
  • Stainless steel (electropolished)

Protection rating

  • IP 66/IP 68 (0.2 bar)
  • IP 66/IP 67
  • IP 66/IP 68 (1 bar)

Output

  • Profibus PA
  • Foundation Fieldbus
  • 4 … 20 mA/HART - two-wire
  • Modbus
  • 4 … 20 mA/HART - four-wire

Ambient temperature : -40 ... 80 °C

]]>
Bộ mã hóa vòng quay Elco | EV58P, EV90P, EV150P Encoder Elco Holding http://thietbicongnghiepnang.com/bo-ma-hoa-vong-quay-elco-ev58p-ev90p-ev150p-encoder-elco-holding 2019-06-05 15:05:52 http://thietbicongnghiepnang.com/bo-ma-hoa-vong-quay-elco-ev58p-ev90p-ev150p-encoder-elco-holding

Nhà cung cấp Encoder chính hãng Elco Holding tại Việt Nam, bộ đếm xung Encoder, bộ mã hóa encoder elco holding

Readmore

Đại lý Elco Holding Việt Nam | Elco Holding Việt Nam

Encoder Elco Holding

EV58P Elco Holding

The standard hollow shaft incremental encoder EV58P of the Topydic series has a good resistance to mechanical damage and is suitable for universal use. The continuous stainless steel hollow shaft with a maximum bore diameter of 15mm has a double bearing design and can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The multiple output circuits and the built-in polarity reversal and short-circuit protection also simplify the connection to most PC's.

  • Incremental encoder EV58P series
  • Robust metal housing
  • Hollow shaft 8 mm - 15 mm
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Reverse and short circuit protection
  • Shock and vibration resistant
  • Protection class IP65
  • Different connection types optional

EV90P Elco Holding

The heavy-duty hollow-shaft incremental encoder of the EV90P series has good resistance to mechanical damage and is suitable for use in heavy industry. The continuous stainless steel hollow shaft with a maximum bore diameter of 45mm can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The different output circuits and built-in reverse polarity and short circuit protection simplify connection to most PC's.

  • Incremental encoder EV90P series
  • Robust metal housing
  • Hollow shaft 25 mm - 45 mm
  • Torque arm or mounting plate for fixation
  • Different connection types optional
  • Output circuit RS422 or Push-Pull
  • Resolution max. 2500 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP65

EV150P Elco Holding

The EV150P Series Topydic rotary encoders, with large continuous hollow shaft, are widely used in industrial environments where direct mounting to the drive shaft is required for speed measurements. The stainless steel shaft tolerates relatively large axial and radial forces and is therefore very suitable for heavy industry. The torque support of the housing via mounting plate, stator coupling or mounting arm. The maximum resolution is 2048 pulses per revolution.

  • Incremental encoder EV150P series
  • Robust metal housing
  • Hollow shaft 60 mm - 80 mm
  • Different connection types optional
  • Torque arm or mounting plate for fixation
  • Output circuit RS422 or Push-Pull
  • Resolution max. 2048 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP65

The post Bộ mã hóa vòng quay Elco | EV58P, EV90P, EV150P Encoder Elco Holding appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Elco Holding Việt Nam | Elco Holding Việt Nam

Encoder Elco Holding

EV58P Elco Holding

The standard hollow shaft incremental encoder EV58P of the Topydic series has a good resistance to mechanical damage and is suitable for universal use. The continuous stainless steel hollow shaft with a maximum bore diameter of 15mm has a double bearing design and can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The multiple output circuits and the built-in polarity reversal and short-circuit protection also simplify the connection to most PC's.

  • Incremental encoder EV58P series
  • Robust metal housing
  • Hollow shaft 8 mm - 15 mm
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Reverse and short circuit protection
  • Shock and vibration resistant
  • Protection class IP65
  • Different connection types optional

EV90P Elco Holding

The heavy-duty hollow-shaft incremental encoder of the EV90P series has good resistance to mechanical damage and is suitable for use in heavy industry. The continuous stainless steel hollow shaft with a maximum bore diameter of 45mm can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The different output circuits and built-in reverse polarity and short circuit protection simplify connection to most PC's.

  • Incremental encoder EV90P series
  • Robust metal housing
  • Hollow shaft 25 mm - 45 mm
  • Torque arm or mounting plate for fixation
  • Different connection types optional
  • Output circuit RS422 or Push-Pull
  • Resolution max. 2500 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP65

EV150P Elco Holding

The EV150P Series Topydic rotary encoders, with large continuous hollow shaft, are widely used in industrial environments where direct mounting to the drive shaft is required for speed measurements. The stainless steel shaft tolerates relatively large axial and radial forces and is therefore very suitable for heavy industry. The torque support of the housing via mounting plate, stator coupling or mounting arm. The maximum resolution is 2048 pulses per revolution.

  • Incremental encoder EV150P series
  • Robust metal housing
  • Hollow shaft 60 mm - 80 mm
  • Different connection types optional
  • Torque arm or mounting plate for fixation
  • Output circuit RS422 or Push-Pull
  • Resolution max. 2048 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP65
]]>
Encoder Elco | Elco Holding Vietnam http://thietbicongnghiepnang.com/encoder-elco 2019-06-04 09:27:36 http://thietbicongnghiepnang.com/encoder-elco

Đại lý phân phối cảm biến Elco Holding chính hãng tại Việt Nam, Encoder Elco

Readmore

Đại lý Elco Holding tại Việt Nam | Elco Vietnam

Encoder tuyệt đối Elco Holding

Incremental Encoder

Absolutely reliable at highest loads. High-precision incremental encoders, optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

EV28 Series

The small economical shaft encoder EV28 series is widely used in light industries, especially where the space for the encoder installation is important. The resolution is up to 600, and with its small size, light weight and high precision, it fully meets the controlling requirements of the modern light industries. With the different shaft lengths available, the product can be used in a wide variety of industrial environments.

  • Incremental encoder EV28 series
  • Robust metal housing
  • Stainless steel shaft Ø4g6 / Ø5g6
  • Output circuit RS422 or Push-Pull
  • Resolution max. 600 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP50

EV40A Series

  • Incremental encoder EV40A series
  • Robust metal housing
  • Shaft stainless steel Ø6g6
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP66

EV40P Series

  • Incremental encoder EV40P series
  • Robust metal housing
  • Hollow shaft Ø6H7 / Ø8H7
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Side cabling for limited installation space
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP66

EV50A Series

EV50P Series

EV58A Series

EV58P Series

EV90P Series

EV150P Serie

EX90R

EX100R

Absolut Single-turn Encoder

Absolutely reliable at highest loads. High-precision single-turn encoders,  optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

Absolut Multi-turn Encoder

Absolutely reliable at highest loads. High-precision mulit-turn encoders, optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

The post Encoder Elco | Elco Holding Vietnam appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Elco Holding tại Việt Nam | Elco Vietnam

Encoder tuyệt đối Elco Holding

Incremental Encoder

Absolutely reliable at highest loads. High-precision incremental encoders, optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

EV28 Series

The small economical shaft encoder EV28 series is widely used in light industries, especially where the space for the encoder installation is important. The resolution is up to 600, and with its small size, light weight and high precision, it fully meets the controlling requirements of the modern light industries. With the different shaft lengths available, the product can be used in a wide variety of industrial environments.

  • Incremental encoder EV28 series
  • Robust metal housing
  • Stainless steel shaft Ø4g6 / Ø5g6
  • Output circuit RS422 or Push-Pull
  • Resolution max. 600 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP50

EV40A Series

  • Incremental encoder EV40A series
  • Robust metal housing
  • Shaft stainless steel Ø6g6
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP66

EV40P Series

  • Incremental encoder EV40P series
  • Robust metal housing
  • Hollow shaft Ø6H7 / Ø8H7
  • Output circuit RS422 or Push-Pull
  • Resolution max. 5000 ppr
  • Side cabling for limited installation space
  • Reverse and short circuit protected
  • Shock and vibration resistant
  • Protection class IP66

EV50A Series

EV50P Series

EV58A Series

EV58P Series

EV90P Series

EV150P Serie

EX90R

EX100R

Absolut Single-turn Encoder

Absolutely reliable at highest loads. High-precision single-turn encoders,  optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

Absolut Multi-turn Encoder

Absolutely reliable at highest loads. High-precision mulit-turn encoders, optionally also programmable or particularly robust, and thus also suitable for the toughest industrial applications.

]]>
Cảm biến điện dung Baumer | Capacitive sensors http://thietbicongnghiepnang.com/cam-bien-dien-dung-baumer 2019-05-30 15:46:14 http://thietbicongnghiepnang.com/cam-bien-dien-dung-baumer

Đại lý phân phối cảm biến Baumer, cảm biến điện dung Baumer tại Việt Nam

Readmore

Đại lý Baumer Việt Nam | Baumer Vietnam

Cảm biến Baumer

Proximity switch for non-contact detection of liquid as well as solid objects and bulk solids

  • High switching distance up to 30 mm even through non-metallic walls
  • Absolutely reliable even when interfered by ambient conditions, e.g. ambient light or dirt
  • Absolutely reliable detection of objects such as wafers, PCBs, paper stacks or hot adhesives up to 200 °C

Sensors in a metal housing

  • Cylindrical (Ø12 to 30 mm) and rectangular (20 mm) sensor designs
  • Flush mount
  • Sensitivity configurable variants with defined default switching point
  • Switching distance up to 15 mm

Sensors in a plastic housing

  • Cylindrical (Ø12 to 30 mm) and rectangular (30 mm) sensors
  • Flush / non-flush mount
  • Sensitivity configurable
  • Variants with defined default switching point
  • Switching distance up to 30 mm

Particularly flat design

  • 52,4 × 25 × 6 mm
  • Flush mount
  • Flexible and easy installation with unique mounting frame
  • Optional cascading of several sensors
  • Switching distance up to 15 mm
Product name product group housing sensing distance max. features

CFAK 12N1103

Article no.: 10164642

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

NPN make function (NO)

no

cable, 2 m

70 °C

IP 67

CFAK 12N1140/KS35L

Article no.: 11039126

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN make function (NO)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12N1140/L

Article no.: 11039124

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN make function (NO)

no

cable, 2 m

50 °C

IP 67

CFAK 12N3103

Article no.: 11001685

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

NPN break function (NC)

no

cable, 2 m

70 °C

IP 67

CFAK 12N3140/KS35L

Article no.: 11045948

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN break function (NC)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12N3140/L

Article no.: 11045947

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN break function (NC)

no

cable, 2 m

50 °C

IP 67

CFAK 12P1103

Article no.: 10129050

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

PNP make function (NO)

no

cable, 2 m

70 °C

IP 67

CFAK 12P1140/KS35L

Article no.: 11017112

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP make function (NO)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12P1140/L

Article no.: 11017111

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP make function (NO)

no

cable, 2 m

50 °C

IP 67

CFAK 12P3103

Article no.: 10164795

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

PNP break function (NC)

no

cable, 2 m

70 °C

IP 67

CFAK 12P3140/KS35L

Article no.: 11045946

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP break function (NC)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12P3140/L

Article no.: 11045945

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP break function (NC)

no

cable, 2 m

50 °C

IP 67

CFAK 18N1100

Article no.: 11001673

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

NPN make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N1200

Article no.: 11001668

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

NPN make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N3100

Article no.: 11001674

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

NPN break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N3200

Article no.: 11001669

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

NPN break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P1100

Article no.: 10165163

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

PNP make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P1200

Article no.: 11001670

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

PNP make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P3100

Article no.: 11001672

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

PNP break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P3200

Article no.: 11001671

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

PNP break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 22U9500/AMP

Article no.: 11149600

Frequency sweep sensors

designed for reliability

adhesion resistant

22 mm x 87 mm

plastic

liquid level sensor for oil

non-flush

voltage output

connector AMPSEAL 16 3 pin

-40 … 85 °C

IP 69K

CFAK 30N1100

Article no.: 11001683

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

NPN make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30N3100

Article no.: 11001684

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

NPN break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30P1100

Article no.: 11001681

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

PNP make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30P3100

Article no.: 11001682

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

PNP break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAM 12N1600

Article no.: 10119679

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

NPN make function (NO)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12N1600/S14

Article no.: 10119689

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

NPN make function (NO)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12N3600

Article no.: 10119682

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

NPN break function (NC)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12N3600/S14

Article no.: 10119688

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

NPN break function (NC)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12P1600

Article no.: 10236343

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

PNP make function (NO)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12P1600/S14

Article no.: 10236345

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

PNP make function (NO)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12P3600

Article no.: 10238060

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

PNP break function (NC)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12P3600/S14

Article no.: 10119690

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

PNP break function (NC)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 18N1600

Article no.: 10119685

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

NPN make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18N1600/S14

Article no.: 10119696

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

NPN make function (NO)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18N3600

Article no.: 10119686

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

NPN break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18N3600/S14

Article no.: 10119695

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

NPN break function (NC)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18P1600

Article no.: 10236458

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

PNP make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18P1600/S14

Article no.: 10236459

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

PNP make function (NO)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18P3600

Article no.: 10119693

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

PNP break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18P3600/S14

Article no.: 10119694

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

PNP break function (NC)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30N1600

Article no.: 10119708

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

NPN make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30N1600/S14

Article no.: 10119711

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

NPN make function (NO)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30N3600

Article no.: 10119707

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

NPN break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30N3600/S14

Article no.: 10119710

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

NPN break function (NC)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30P1600

Article no.: 10119341

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

PNP make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30P1600/S14

Article no.: 10119342

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

PNP make function (NO)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30P3600

Article no.: 10119706

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

PNP break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30P3600/S14

Article no.: 10119709

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

PNP break function (NC)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFBM 20N1600

Article no.: 10119699

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

NPN make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20N3600

Article no.: 10119698

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

NPN break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20P1600

Article no.: 10242153

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

PNP make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20P3600

Article no.: 10119697

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

PNP break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN1

Article no.: 11076113

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

2 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN3

Article no.: 11076114

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

4 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN4

Article no.: 11076813

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

8 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN5

Article no.: 11076117

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

12 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN6

Article no.: 11076115

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

non-flush

15 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/LN1

Article no.: 11050682

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

2 mm

push-pull

no

cable PVC 3 x 0,14, 2 m

-25 … 75 °C

IP 65

CFDK 25G1125/LN3

Article no.: 11050683

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

4 mm

push-pull

no

cable PVC 3 x 0,14, 2 m

-25 … 75 °C

IP 65

Các thiết bị khác của hãng Baumer : cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, encoder baumer

The post Cảm biến điện dung Baumer | Capacitive sensors appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Baumer Việt Nam | Baumer Vietnam

Cảm biến Baumer

Proximity switch for non-contact detection of liquid as well as solid objects and bulk solids

  • High switching distance up to 30 mm even through non-metallic walls
  • Absolutely reliable even when interfered by ambient conditions, e.g. ambient light or dirt
  • Absolutely reliable detection of objects such as wafers, PCBs, paper stacks or hot adhesives up to 200 °C

Sensors in a metal housing

  • Cylindrical (Ø12 to 30 mm) and rectangular (20 mm) sensor designs
  • Flush mount
  • Sensitivity configurable variants with defined default switching point
  • Switching distance up to 15 mm

Sensors in a plastic housing

  • Cylindrical (Ø12 to 30 mm) and rectangular (30 mm) sensors
  • Flush / non-flush mount
  • Sensitivity configurable
  • Variants with defined default switching point
  • Switching distance up to 30 mm

Particularly flat design

  • 52,4 × 25 × 6 mm
  • Flush mount
  • Flexible and easy installation with unique mounting frame
  • Optional cascading of several sensors
  • Switching distance up to 15 mm
Product name product group housing sensing distance max. features

CFAK 12N1103

Article no.: 10164642

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

NPN make function (NO)

no

cable, 2 m

70 °C

IP 67

CFAK 12N1140/KS35L

Article no.: 11039126

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN make function (NO)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12N1140/L

Article no.: 11039124

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN make function (NO)

no

cable, 2 m

50 °C

IP 67

CFAK 12N3103

Article no.: 11001685

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

NPN break function (NC)

no

cable, 2 m

70 °C

IP 67

CFAK 12N3140/KS35L

Article no.: 11045948

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN break function (NC)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12N3140/L

Article no.: 11045947

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

NPN break function (NC)

no

cable, 2 m

50 °C

IP 67

CFAK 12P1103

Article no.: 10129050

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

PNP make function (NO)

no

cable, 2 m

70 °C

IP 67

CFAK 12P1140/KS35L

Article no.: 11017112

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP make function (NO)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12P1140/L

Article no.: 11017111

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP make function (NO)

no

cable, 2 m

50 °C

IP 67

CFAK 12P3103

Article no.: 10164795

Capacitive proximity sensors

in direct media contact

12 mm x 39 mm

plastic

non-flush

0,5 mm

PNP break function (NC)

no

cable, 2 m

70 °C

IP 67

CFAK 12P3140/KS35L

Article no.: 11045946

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP break function (NC)

no

flylead connector M8, L=200 mm

50 °C

IP 67

CFAK 12P3140/L

Article no.: 11045945

Capacitive proximity sensors

12 mm x 39,5 mm

plastic

liquid level sensor for wastewater

non-flush

0,1 mm

PNP break function (NC)

no

cable, 2 m

50 °C

IP 67

CFAK 18N1100

Article no.: 11001673

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

NPN make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N1200

Article no.: 11001668

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

NPN make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N3100

Article no.: 11001674

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

NPN break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18N3200

Article no.: 11001669

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

NPN break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P1100

Article no.: 10165163

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

PNP make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P1200

Article no.: 11001670

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

PNP make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P3100

Article no.: 11001672

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

5 mm

PNP break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 18P3200

Article no.: 11001671

Capacitive proximity sensors

in direct media contact

18 mm x 63,5 mm

plastic

non-flush

15 mm

PNP break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 22U9500/AMP

Article no.: 11149600

Frequency sweep sensors

designed for reliability

adhesion resistant

22 mm x 87 mm

plastic

liquid level sensor for oil

non-flush

voltage output

connector AMPSEAL 16 3 pin

-40 … 85 °C

IP 69K

CFAK 30N1100

Article no.: 11001683

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

NPN make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30N3100

Article no.: 11001684

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

NPN break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30P1100

Article no.: 11001681

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

PNP make function (NO)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAK 30P3100

Article no.: 11001682

Capacitive proximity sensors

in direct media contact

30 mm x 72 mm

plastic

non-flush

8 mm

PNP break function (NC)

no

cable, 2 m

-25 … 75 °C

IP 67/65 (sensing face/sensor)

CFAM 12N1600

Article no.: 10119679

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

NPN make function (NO)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12N1600/S14

Article no.: 10119689

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

NPN make function (NO)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12N3600

Article no.: 10119682

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

NPN break function (NC)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12N3600/S14

Article no.: 10119688

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

NPN break function (NC)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12P1600

Article no.: 10236343

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

PNP make function (NO)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12P1600/S14

Article no.: 10236345

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

PNP make function (NO)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 12P3600

Article no.: 10238060

Capacitive proximity sensors

12 mm x 60 mm

metal

flush

4 mm

PNP break function (NC)

potentiometer, 240°

cable, 2 m

-25 … 75 °C

IP 65

CFAM 12P3600/S14

Article no.: 10119690

Capacitive proximity sensors

12 mm x 76 mm

metal

flush

4 mm

PNP break function (NC)

potentiometer, 240°

connector M12

-25 … 75 °C

IP 65

CFAM 18N1600

Article no.: 10119685

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

NPN make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18N1600/S14

Article no.: 10119696

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

NPN make function (NO)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18N3600

Article no.: 10119686

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

NPN break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18N3600/S14

Article no.: 10119695

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

NPN break function (NC)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18P1600

Article no.: 10236458

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

PNP make function (NO)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18P1600/S14

Article no.: 10236459

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

PNP make function (NO)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 18P3600

Article no.: 10119693

Capacitive proximity sensors

18 mm x 64 mm

metal

flush

8 mm

PNP break function (NC)

potentiometer, 12 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 18P3600/S14

Article no.: 10119694

Capacitive proximity sensors

18 mm x 78,5 mm

metal

flush

8 mm

PNP break function (NC)

potentiometer, 12 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30N1600

Article no.: 10119708

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

NPN make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30N1600/S14

Article no.: 10119711

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

NPN make function (NO)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30N3600

Article no.: 10119707

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

NPN break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30N3600/S14

Article no.: 10119710

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

NPN break function (NC)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30P1600

Article no.: 10119341

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

PNP make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30P1600/S14

Article no.: 10119342

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

PNP make function (NO)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFAM 30P3600

Article no.: 10119706

Capacitive proximity sensors

30 mm x 71 mm

metal

flush

15 mm

PNP break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFAM 30P3600/S14

Article no.: 10119709

Capacitive proximity sensors

30 mm x 82 mm

metal

flush

15 mm

PNP break function (NC)

potentiometer, 18 turn

connector M12

-25 … 75 °C

IP 65

CFBM 20N1600

Article no.: 10119699

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

NPN make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20N3600

Article no.: 10119698

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

NPN break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20P1600

Article no.: 10242153

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

PNP make function (NO)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFBM 20P3600

Article no.: 10119697

Capacitive proximity sensors

20 mm x 79,5 mm

metal

flush

10 mm

PNP break function (NC)

potentiometer, 18 turn

cable, 2 m

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN1

Article no.: 11076113

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

2 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN3

Article no.: 11076114

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

4 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN4

Article no.: 11076813

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

8 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN5

Article no.: 11076117

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

12 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/KS35LN6

Article no.: 11076115

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

non-flush

15 mm

push-pull

no

flylead connector M8, L=200 mm

-25 … 75 °C

IP 65

CFDK 25G1125/LN1

Article no.: 11050682

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

2 mm

push-pull

no

cable PVC 3 x 0,14, 2 m

-25 … 75 °C

IP 65

CFDK 25G1125/LN3

Article no.: 11050683

Capacitive proximity sensors

25 mm x 52,4 mm

plastic

flush

4 mm

push-pull

no

cable PVC 3 x 0,14, 2 m

-25 … 75 °C

IP 65

Các thiết bị khác của hãng Baumer : cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, encoder baumer

]]>
Cảm biến quang Baumer | Photoelectric sensors http://thietbicongnghiepnang.com/cam-bien-quang-baumer 2019-05-29 13:35:09 http://thietbicongnghiepnang.com/cam-bien-quang-baumer

Đại lý phân phối cảm biến Baumer tại Việt Nam

Readmore

Đại lý Baumer Việt Nam | Baumer Vietnam

Cảm biến quang điện Baumer - Cảm biến Baumer - Cảm biến sợi quang Baumer

Photoelectric sensors

Unique reliable object detection and positioning

  • Smart & Small – top performance in smallest designs
  • Find the optimum solution quickly through large portfolio
  • Easy to set up with clever teach-in function
  • Laser sensors for detection tasks in the 0.01 mm range

Subminiature sensors

  • Sized 4 mm and up
  • Smallest adjustable optical sensor
  • All- integrated electronics
  • Sensing range up to 80 mm
Product name Product group Housing sensing distance max. features

FEAM 08P1002

Article no.: 10219153

Through beam sensors

subminiature

receiver

8 mm x 59 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEAM 08P1002/S35L

Article no.: 10238056

Through beam sensors

subminiature

receiver

8 mm x 75,5 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEAM 08P3002

Article no.: 10218468

Through beam sensors

subminiature

receiver

8 mm x 59 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEAM 08P3002/S35L

Article no.: 10238057

Through beam sensors

subminiature

receiver

8 mm x 75,5 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FECK 07N6901

Article no.: 10152095

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FECK 07N6901/KS35A

Article no.: 10152097

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FECK 07P6901

Article no.: 10151068

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FECK 07P6901/KS35A

Article no.: 10151070

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDK 07N6901

Article no.: 10152096

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

cable bottom side, 2 m

-20 … 50 °C

IP 65

FEDK 07N6901/KS35A

Article no.: 10152098

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDK 07P6901

Article no.: 10151069

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

cable bottom side, 2 m

-20 … 50 °C

IP 65

FEDK 07P6901/KS35A

Article no.: 10151071

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDM 08P1001

Article no.: 10236651

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P1001/S35L

Article no.: 10236650

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P1002

Article no.: 10218691

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P1002/S35L

Article no.: 10236653

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P3001

Article no.: 10236644

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P3001/S35L

Article no.: 10235234

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P3002

Article no.: 10218467

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P3002/S35L

Article no.: 10228467

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FHCK 07N6901

Article no.: 10152083

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

NPN

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FHCK 07N6901/KS35A

Article no.: 10152085

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FHCK 07P6901

Article no.: 10148791

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

PNP

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FHCK 07P6901/KS35A

Article no.: 10149511

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FHDK 04G6101

Article no.: 10162790

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6101/KS35A

Article no.: 10162791

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

  • 30 mm ±2 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

FHDK 04G6102

Article no.: 10162786

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

50 mm ±3 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6102/KS35A

Article no.: 10162787

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

50 mm ±3 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

FHDK 04G6111

Article no.: 10162792

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6111/KS35A

Article no.: 10162793

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

Photoelectric sensors with IO-Link

  • Additional process data, e.g. device temperature and counter function
  • Acquisition and evaluation of additional diagnostic data
  • Individual and application-specific parameterization
  • Simple and safe operability

Miniature sensors

  • Sized 10 mm and up
  • All-integrated electronics
  • Extensive sensing range up to 10 m
  • 0.1 mm laser spot for tiny objects
  • Large selection of variants

Miniature sensors O200

  • Housing size 8 mm
  • Background suppression up to 120 mm
  • SmartReflect up to 180 mm
  • Through-beam and retro-reflective sensors up to 6 meters
  • Extremely high ambient light immunity

Standard sensors with extra power O300/O500

  • Powerful microcontroller
  • 7 sensor principles, 4 light sources, line or point beam shapes
  • Easy to install and operate
  • IO-Link – Industry 4.0 and IoT-ready

Cylindrical M18 sensors

  • Sensors in M18 housing with excellent price-performance ratio
  • 6 sensor principles to choose from
  • Plastic, brass or stainless steel housing
  • Extensive sensing range up to 55 meters

Standard sensors

  • Large selection of product variants
  • Designs from 12.9 to 25 mm
  • White light, red light and laser sensors
  • Sensing range up to 25 m

Laser sensors

  • PinPoint positioning with 0.01 mm accuracy
  • 0.1 mm laser beam to detect even tiny objects
  • Laser line for seamless object detection
  • Short response times of < 0.1 ms
Product group Housing Sensing distance max. Features

O300.GL-GW1J.72CU

Article no.: 11171740

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-NV1T.72CU

Article no.: 11171745

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-NV1T.72N

Article no.: 11171742

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-PV1T.72CU

Article no.: 11171747

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-PV1T.72N

Article no.: 11171748

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.RL-GW1J.72N

Article no.: 11172769

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-NV1T.72CU

Article no.: 11172800

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-NV1T.72N

Article no.: 11172801

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-PV1T.72CU

Article no.: 11172802

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-PV1T.72N

Article no.: 11172803

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.SL-GW1J.72CU

Article no.: 11176826

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-GW1J.72CU/E022

Article no.: 11199074

SmartReflect Light barriers

line beam

12,9 mm x 32,3 mm

plastic

30 … 120 mm

O300.SL-GW1J.72N

Article no.: 11176827

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-GW1J.72N/E022

Article no.: 11199075

SmartReflect Light barriers

line beam

12,9 mm x 32,3 mm

plastic

30 … 120 mm

O300.SL-NV1T.72CU

Article no.: 11179003

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-NV1T.72N

Article no.: 11179004

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-PV1T.72CU

Article no.: 11179005

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-PV1T.72N

Article no.: 11179006

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.ZL-GW1J.72CU

Article no.: 11176829

Diffuse sensors with intensity difference

12,9 mm x 32,3 mm

plastic

10 … 250 mm

O300.ZL-GW1J.72N

Article no.: 11176840

Diffuse sensors with intensity difference

12,9 mm x 32,3 mm

plastic

10 … 250 mm

O300H.GL-GW1J.PVCV

Article no.: 11171768

Diffuse sensors with background suppression

hygiene

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.GL-GW1J.PVNV

Article no.: 11171769

Diffuse sensors with background suppression

hygiene

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.RL-GW1J.PVCV

Article no.: 11172813

Retro-reflective sensors

miniature

16,5 mm x 34,6 mm

stainless steel

hygienic design

5 m

O300H.RL-GW1J.PVNV

Article no.: 11172814

Retro-reflective sensors

miniature

16,5 mm x 34,6 mm

stainless steel

hygienic design

5 m

O300H.SL-GW1J.PVCV

Article no.: 11179007

SmartReflect Light barriers

hygiene

standard object detection

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.SL-GW1J.PVNV

Article no.: 11179008

SmartReflect Light barriers

hygiene

standard object detection

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300W.GL-GW1J.PVN

Article no.: 11171770

Diffuse sensors with background suppression

washdown

16,5 mm x 34,7 mm

stainless steel

Washdown design

30 … 250 mm

O300W.RL-GW1J.PVN

Article no.: 11172815

Retro-reflective sensors

washdown

16,5 mm x 34,7 mm

stainless steel

Washdown design

5 m

O300W.SL-GW1J.PVN

Article no.: 11179009

SmartReflect Light barriers

washdown

standard object detection

16,5 mm x 34,7 mm

stainless steel

Washdown design

30 … 250 mm

O500H.SP.T-GW1J.PVCV/B005

Article no.: 11136929

SmartReflect Light barriers

hygiene

transparency object detection

20,2 mm x 47,7 mm

stainless steel

hygienic design

60 … 1000 mm

Light barriers without reflector – SmartReflect

  • Safe and easy referencing on machine parts
  • Short response times of < 0.25 ms
  • Sensing range up to 1.9 m
  • Insensitive to dirt
  • Extremely easy setup

Transparency detection

  • For bowls, PET bottles, foils
  • Plastic or stainless steel housing
  • Short response times of < 0.25 ms
  • Up to 1 m with SmartReflect
  • Up to 7 m with retro-reflective light barrier

Robust washdown design

  • Robust stainless steel housing
  • Long-term sealing thanks to proTect+
  • IP 69K and Ecolab tested
  • Different sizes and sensor principles
  • Benefits by SmartReflect light barrier without reflector

Hygienic design

  • EHEDG certified, FDA-compliant, Ecolab tested
  • Long-term sealing thanks to proTect+
  • IP 69K
  • Different sizes and sensor principles
  • Benefits through SmartReflect light barrier without reflector

The post Cảm biến quang Baumer | Photoelectric sensors appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Baumer Việt Nam | Baumer Vietnam

Cảm biến quang điện Baumer - Cảm biến Baumer - Cảm biến sợi quang Baumer

Photoelectric sensors

Unique reliable object detection and positioning

  • Smart & Small – top performance in smallest designs
  • Find the optimum solution quickly through large portfolio
  • Easy to set up with clever teach-in function
  • Laser sensors for detection tasks in the 0.01 mm range

Subminiature sensors

  • Sized 4 mm and up
  • Smallest adjustable optical sensor
  • All- integrated electronics
  • Sensing range up to 80 mm
Product name Product group Housing sensing distance max. features

FEAM 08P1002

Article no.: 10219153

Through beam sensors

subminiature

receiver

8 mm x 59 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEAM 08P1002/S35L

Article no.: 10238056

Through beam sensors

subminiature

receiver

8 mm x 75,5 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEAM 08P3002

Article no.: 10218468

Through beam sensors

subminiature

receiver

8 mm x 59 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEAM 08P3002/S35L

Article no.: 10238057

Through beam sensors

subminiature

receiver

8 mm x 75,5 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FECK 07N6901

Article no.: 10152095

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FECK 07N6901/KS35A

Article no.: 10152097

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FECK 07P6901

Article no.: 10151068

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FECK 07P6901/KS35A

Article no.: 10151070

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDK 07N6901

Article no.: 10152096

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

cable bottom side, 2 m

-20 … 50 °C

IP 65

FEDK 07N6901/KS35A

Article no.: 10152098

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDK 07P6901

Article no.: 10151069

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

cable bottom side, 2 m

-20 … 50 °C

IP 65

FEDK 07P6901/KS35A

Article no.: 10151071

Through beam sensors

subminiature

receiver

8 mm x 16,2 mm

plastic

2 m

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FEDM 08P1001

Article no.: 10236651

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P1001/S35L

Article no.: 10236650

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P1002

Article no.: 10218691

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P1002/S35L

Article no.: 10236653

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P3001

Article no.: 10236644

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P3001/S35L

Article no.: 10235234

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

0,7 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FEDM 08P3002

Article no.: 10218467

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

cable 3 pin, 2 m

-25 … 65 °C

IP 65

FEDM 08P3002/S35L

Article no.: 10228467

Through beam sensors

subminiature

receiver

8 mm x 58 mm

metal

2,5 m

PNP

no

connector M8, 3 pin

-25 … 65 °C

IP 65

FHCK 07N6901

Article no.: 10152083

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

NPN

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FHCK 07N6901/KS35A

Article no.: 10152085

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

NPN

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FHCK 07P6901

Article no.: 10148791

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

PNP

Teach-in

cable rear side, 2 m

-20 … 50 °C

IP 65

FHCK 07P6901/KS35A

Article no.: 10149511

Diffuse sensors with background suppression

subminiature

8 mm x 16,2 mm

plastic

10 … 60 mm

pulsed red LED

PNP

Teach-in

flylead connector M8 4 pin, L=200 mm

-20 … 50 °C

IP 65

FHDK 04G6101

Article no.: 10162790

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6101/KS35A

Article no.: 10162791

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

  • 30 mm ±2 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

FHDK 04G6102

Article no.: 10162786

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

50 mm ±3 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6102/KS35A

Article no.: 10162787

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

50 mm ±3 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

FHDK 04G6111

Article no.: 10162792

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

cable 3 pin, 2 m

-10 … 50 °C

IP 65

FHDK 04G6111/KS35A

Article no.: 10162793

Diffuse sensors with background suppression

subminiature

4 mm x 44,8 mm

plastic

30 mm ±2 mm

pulsed point source LED

push-pull

flylead connector M8 4 pin, L=200 mm

-10 … 50 °C

IP 65

Photoelectric sensors with IO-Link

  • Additional process data, e.g. device temperature and counter function
  • Acquisition and evaluation of additional diagnostic data
  • Individual and application-specific parameterization
  • Simple and safe operability

Miniature sensors

  • Sized 10 mm and up
  • All-integrated electronics
  • Extensive sensing range up to 10 m
  • 0.1 mm laser spot for tiny objects
  • Large selection of variants

Miniature sensors O200

  • Housing size 8 mm
  • Background suppression up to 120 mm
  • SmartReflect up to 180 mm
  • Through-beam and retro-reflective sensors up to 6 meters
  • Extremely high ambient light immunity

Standard sensors with extra power O300/O500

  • Powerful microcontroller
  • 7 sensor principles, 4 light sources, line or point beam shapes
  • Easy to install and operate
  • IO-Link – Industry 4.0 and IoT-ready

Cylindrical M18 sensors

  • Sensors in M18 housing with excellent price-performance ratio
  • 6 sensor principles to choose from
  • Plastic, brass or stainless steel housing
  • Extensive sensing range up to 55 meters

Standard sensors

  • Large selection of product variants
  • Designs from 12.9 to 25 mm
  • White light, red light and laser sensors
  • Sensing range up to 25 m

Laser sensors

  • PinPoint positioning with 0.01 mm accuracy
  • 0.1 mm laser beam to detect even tiny objects
  • Laser line for seamless object detection
  • Short response times of < 0.1 ms
Product group Housing Sensing distance max. Features

O300.GL-GW1J.72CU

Article no.: 11171740

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-NV1T.72CU

Article no.: 11171745

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-NV1T.72N

Article no.: 11171742

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-PV1T.72CU

Article no.: 11171747

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.GL-PV1T.72N

Article no.: 11171748

Diffuse sensors with background suppression

miniature

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.RL-GW1J.72N

Article no.: 11172769

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-NV1T.72CU

Article no.: 11172800

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-NV1T.72N

Article no.: 11172801

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-PV1T.72CU

Article no.: 11172802

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.RL-PV1T.72N

Article no.: 11172803

Retro-reflective sensors

miniature

12,9 mm x 32,3 mm

plastic

5 m

O300.SL-GW1J.72CU

Article no.: 11176826

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-GW1J.72CU/E022

Article no.: 11199074

SmartReflect Light barriers

line beam

12,9 mm x 32,3 mm

plastic

30 … 120 mm

O300.SL-GW1J.72N

Article no.: 11176827

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-GW1J.72N/E022

Article no.: 11199075

SmartReflect Light barriers

line beam

12,9 mm x 32,3 mm

plastic

30 … 120 mm

O300.SL-NV1T.72CU

Article no.: 11179003

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-NV1T.72N

Article no.: 11179004

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-PV1T.72CU

Article no.: 11179005

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.SL-PV1T.72N

Article no.: 11179006

SmartReflect Light barriers

miniature

standard object detection

12,9 mm x 32,3 mm

plastic

30 … 250 mm

O300.ZL-GW1J.72CU

Article no.: 11176829

Diffuse sensors with intensity difference

12,9 mm x 32,3 mm

plastic

10 … 250 mm

O300.ZL-GW1J.72N

Article no.: 11176840

Diffuse sensors with intensity difference

12,9 mm x 32,3 mm

plastic

10 … 250 mm

O300H.GL-GW1J.PVCV

Article no.: 11171768

Diffuse sensors with background suppression

hygiene

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.GL-GW1J.PVNV

Article no.: 11171769

Diffuse sensors with background suppression

hygiene

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.RL-GW1J.PVCV

Article no.: 11172813

Retro-reflective sensors

miniature

16,5 mm x 34,6 mm

stainless steel

hygienic design

5 m

O300H.RL-GW1J.PVNV

Article no.: 11172814

Retro-reflective sensors

miniature

16,5 mm x 34,6 mm

stainless steel

hygienic design

5 m

O300H.SL-GW1J.PVCV

Article no.: 11179007

SmartReflect Light barriers

hygiene

standard object detection

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300H.SL-GW1J.PVNV

Article no.: 11179008

SmartReflect Light barriers

hygiene

standard object detection

16,5 mm x 34,6 mm

stainless steel

hygienic design

30 … 250 mm

O300W.GL-GW1J.PVN

Article no.: 11171770

Diffuse sensors with background suppression

washdown

16,5 mm x 34,7 mm

stainless steel

Washdown design

30 … 250 mm

O300W.RL-GW1J.PVN

Article no.: 11172815

Retro-reflective sensors

washdown

16,5 mm x 34,7 mm

stainless steel

Washdown design

5 m

O300W.SL-GW1J.PVN

Article no.: 11179009

SmartReflect Light barriers

washdown

standard object detection

16,5 mm x 34,7 mm

stainless steel

Washdown design

30 … 250 mm

O500H.SP.T-GW1J.PVCV/B005

Article no.: 11136929

SmartReflect Light barriers

hygiene

transparency object detection

20,2 mm x 47,7 mm

stainless steel

hygienic design

60 … 1000 mm

Light barriers without reflector – SmartReflect

  • Safe and easy referencing on machine parts
  • Short response times of < 0.25 ms
  • Sensing range up to 1.9 m
  • Insensitive to dirt
  • Extremely easy setup

Transparency detection

  • For bowls, PET bottles, foils
  • Plastic or stainless steel housing
  • Short response times of < 0.25 ms
  • Up to 1 m with SmartReflect
  • Up to 7 m with retro-reflective light barrier

Robust washdown design

  • Robust stainless steel housing
  • Long-term sealing thanks to proTect+
  • IP 69K and Ecolab tested
  • Different sizes and sensor principles
  • Benefits by SmartReflect light barrier without reflector

Hygienic design

  • EHEDG certified, FDA-compliant, Ecolab tested
  • Long-term sealing thanks to proTect+
  • IP 69K
  • Different sizes and sensor principles
  • Benefits through SmartReflect light barrier without reflector
]]>
Encoder tuyệt đối Baumer | Encoders absolute http://thietbicongnghiepnang.com/encoder-tuyet-doi-baumer-encoders-absolute 2019-05-28 14:42:37 http://thietbicongnghiepnang.com/encoder-tuyet-doi-baumer-encoders-absolute

Đại lý phân phối thiết bị hãng Baumer tại Việt Nam, cảm biến Baumer, Encoder Baumer

Readmore

Đại lý Baumer Việt Nam | Baumer Vietnam

Encoder Baumer

Industrial encoders absolute

Absolutely universal – reliable position feedback without referencing, singleturn and multiturn technology

  • Magnetic or optical sensing – always the best technology for your application
  • Wide and convenient selection among all relevant signal interfaces & shaft versions
  • Compact designs from 28 mm for time- & space-saving installation
Product name

Size (flange)

Shaft type

Steps per revolution

Number of revolutions Interface
EAL580-B - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-B - PROFINET - OptoTurn®
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-SC - EtherCAT - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-SC - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-SC - PROFINET - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-SV - EtherCAT - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-SV - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-SV - PROFINET - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-T - EtherCAT - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-T - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-T - PROFINET - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAM280 - analog
  • ø48 mm, housing 28.6 mm
  • ø6 mm, solid shaft with flat
  • Push-on coupling
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM280 - CANopen®
  • ø48 mm, housing 28.6 mm
  • ø6 mm, solid shaft with flat
  • Push-on coupling
  • ≤16384 / 14 bit
  • CANopen®
EAM360-B - CANopen® - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-B - SSI - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360-K - CANopen® - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-K - SSI - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360-S - CANopen® - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-S - SSI - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360R-B - analog - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-B - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM360R-K - analog - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-K - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM360R-S - analog - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-S - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580-B - CANopen® - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-B - PROFINET - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-B - SSI - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-K - CANopen® - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-K - PROFINET - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-K - SSI - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-SC - CANopen® - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-SC - PROFINET - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-SC - SSI - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-SY - CANopen® - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-SY - PROFINET - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-SY - SSI - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580R-B - analog - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-B - CANopen® - MAGRES redundant
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-B - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-K - analog - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-K - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-SC - analog - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-SC - CANopen® - MAGRES redundant
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-SC - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-SY - analog - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-SY - CANopen® - MAGRES redundant
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-SY - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
GM400
  • ø58 mm
  • ø10 mm solid shaft
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • SSI
  • Incremental A 90° B (optional)
GM401
  • ø58 mm
  • ø6 mm solid shaft
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • SSI
  • Incremental A 90° B (optional)
BMMV 58K CANopen® - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
BMMV 58K flexible - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMMV 58K flexible - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • SAE J1939
BMMV 58K Profibus-DP - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤8192 / 13 bit
  • ≤65536 / 16 bit
  • Profibus-DPV0
BMMV 58K SSI - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • 4096 / 12 bit
  • 8192 / 13 bit
  • SSI
BMMV 58S flexible - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat (synchro flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSH 58 flexible - MAGRES
  • ø58 mm
  • ø12 mm (blind hollow shaft)
  • ø15 mm (blind hollow shaft)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSV 58K flexible - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat (clamping flange)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSV 58S flexible - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat (synchro flange)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939

Các thiết bị khác của hãng Baumer :cảm biến Baumer,  cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, encoder baumer

The post Encoder tuyệt đối Baumer | Encoders absolute appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Baumer Việt Nam | Baumer Vietnam

Encoder Baumer

Industrial encoders absolute

Absolutely universal – reliable position feedback without referencing, singleturn and multiturn technology

  • Magnetic or optical sensing – always the best technology for your application
  • Wide and convenient selection among all relevant signal interfaces & shaft versions
  • Compact designs from 28 mm for time- & space-saving installation
Product name

Size (flange)

Shaft type

Steps per revolution

Number of revolutions Interface
EAL580-B - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-B - PROFINET - OptoTurn®
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-SC - EtherCAT - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-SC - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-SC - PROFINET - OptoTurn®
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-SV - EtherCAT - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-SV - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-SV - PROFINET - OptoTurn®
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAL580-T - EtherCAT - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherCAT
EAL580-T - EtherNet/IP - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • EtherNet/IP
EAL580-T - PROFINET - OptoTurn®
  • ø58 mm
  • ø10...14 mm (through hollow shaft)
  • ≤262144 / 18 bit (adjustable)
  • ≤65536 / 16 bit (adjustable)
  • PROFINET IO
EAM280 - analog
  • ø48 mm, housing 28.6 mm
  • ø6 mm, solid shaft with flat
  • Push-on coupling
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM280 - CANopen®
  • ø48 mm, housing 28.6 mm
  • ø6 mm, solid shaft with flat
  • Push-on coupling
  • ≤16384 / 14 bit
  • CANopen®
EAM360-B - CANopen® - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-B - SSI - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360-K - CANopen® - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-K - SSI - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360-S - CANopen® - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM360-S - SSI - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM360R-B - analog - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-B - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM360R-K - analog - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-K - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM360R-S - analog - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM360R-S - CANopen®/SAE J1939 - MAGRES
  • ø36 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580-B - CANopen® - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-B - PROFINET - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-B - SSI - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-K - CANopen® - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-K - PROFINET - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-K - SSI - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-SC - CANopen® - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-SC - PROFINET - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-SC - SSI - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580-SY - CANopen® - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • CANopen®-Lift
  • CANopen® + incremental
EAM580-SY - PROFINET - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • PROFINET IO
EAM580-SY - SSI - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • SSI
  • SSI + incremental
EAM580R-B - analog - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-B - CANopen® - MAGRES redundant
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-B - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø10...15 mm (blind hollow shaft)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-K - analog - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-K - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø6 mm (magnet bore)
  • ø8 mm (magnet bore)
  • ø12 mm (magnet bore)
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-SC - analog - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-SC - CANopen® - MAGRES redundant
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-SC - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø10 x 16 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
EAM580R-SY - analog - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
EAM580R-SY - CANopen® - MAGRES redundant
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
EAM580R-SY - CANopen®/SAE J1939 - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat
  • ≤16384 / 14 bit
  • ≤262144 / 18 bit
  • CANopen®
  • SAE J1939
GM400
  • ø58 mm
  • ø10 mm solid shaft
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • SSI
  • Incremental A 90° B (optional)
GM401
  • ø58 mm
  • ø6 mm solid shaft
  • ≤16384 / 14 bit
  • ≤65536 / 16 bit
  • SSI
  • Incremental A 90° B (optional)
BMMV 58K CANopen® - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
BMMV 58K flexible - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMMV 58K flexible - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • SAE J1939
BMMV 58K Profibus-DP - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • ≤8192 / 13 bit
  • ≤65536 / 16 bit
  • Profibus-DPV0
BMMV 58K SSI - MAGRES hermetic
  • ø58 mm
  • ø10 mm solid shaft (clamping flange)
  • 4096 / 12 bit
  • 8192 / 13 bit
  • SSI
BMMV 58S flexible - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat (synchro flange)
  • ≤4096 / 12 bit
  • ≤262144 / 18 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSH 58 flexible - MAGRES
  • ø58 mm
  • ø12 mm (blind hollow shaft)
  • ø15 mm (blind hollow shaft)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSV 58K flexible - MAGRES
  • ø58 mm
  • ø10 x 20 mm, solid shaft with flat (clamping flange)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939
BMSV 58S flexible - MAGRES
  • ø58 mm
  • ø6 x 10 mm, solid shaft with flat (synchro flange)
  • ≤4096 / 12 bit
  • CANopen®
  • DeviceNet
  • EtherCAT
  • EtherNet/IP
  • Profibus-DPV0/V2
  • PROFINET
  • POWERLINK
  • SAE J1939

Các thiết bị khác của hãng Baumer :cảm biến Baumer,  cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, encoder baumer

]]>
Encoder Baumer http://thietbicongnghiepnang.com/encoder-baumer 2019-05-27 14:23:02 http://thietbicongnghiepnang.com/encoder-baumer

Công Ty Tăng Minh Phát - Nhà phân phối thiết bị Baumer chính hãng tại Việt Nam

Readmore

Đại lý cung cấp Baumer tại Việt Nam | Baumer Vietnam

Encoder Baumer Vietnam, Encoder xung Baumer, Encoder motor, Bộ đếm xung encoder, Bộ mã hóa vòng quay Baumer

Rotary encoders

Measuring and monitoring of rotary speed and rotary shaft positions at machines, installations and electrical drives

1. Encoder tuyệt đối Baumer | Industrial encoders absolute

  • Magnetic or optical sensing
  • Always the best technology for your application
  • All relevant signal interfaces & shaft versions
  • Wide and convenient selection
  • Compact designs 28 … 58 mm
  • Time- & space-saving installation
Product name Size (flange) Shaft type Steps per revolution Number of revolutions
EAL580-B - EtherCAT - OptoTurn

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-B - EtherNet/IP - OptoTurn®

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-B - PROFINET - OptoTurn®

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-SC - EtherCAT - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-SC - EtherNet/IP - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-SC - PROFINET - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-SV - EtherCAT - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-SV - EtherNet/IP - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-SV - PROFINET - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 /18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-T - EtherCAT - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-T - EtherNet/IP - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-T - PROFINET - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAM280 - analog

ø48 mm, housing 28.6 mm

ø6 mm, solid shaft with flat

Push-on coupling

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM280 - CANopen®

ø48 mm, housing 28.6 mm

ø6 mm, solid shaft with flat

Push-on coupling

≤16384 / 14 bit

CANopen®

EAM360-B - CANopen® - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-B - SSI - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360-K - CANopen® - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-K - SSI - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360-S - CANopen® - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-S - SSI - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360R-B - analog - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-B - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM360R-K - analog - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-K - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM360R-S - analog - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-S - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM580-B - CANopen® - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®CANopen®-LiftCANopen® + incremental

EAM580-B - PROFINET - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤65536 / 16 bit

PROFINET IO

EAM580-B - SSI - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM580-K - CANopen® - MAGRES

ø58 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

2. Industrial encoders incremental

  • Compact in size
  • Robust and modular design
  • From 24 mm design on to 85 mm hollow shaft diameter
  • Precise optical or robust magnetic sensing
  • All common installation options, HTL, TTL and SinCos output signals
Product name Size (flange) Shaft type Pulses/waves per revolution Output stages

EIL580-B - Option 6301

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-B - OptoPulse®

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-S1 - OptoPulse®

ø115 mm

ø11 x 30  mm solid shaft with woodruff key

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SC - OptoPulse®

ø58 mm

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SQ - OptoPulse®

2.5 x 2.5" (63.5 x 63.5 mm)

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SY - OptoPulse®

ø58 mm

ø6 x 10 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-T - Option 6301

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-T - OptoPulse®

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580P-B - OptoPulse®

ø58 mm

ø8...15 mm (blind hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SC - OptoPulse®

ø58 mm

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SQ - OptoPulse®

2.5 x 2.5" (63.5 x 63.5 mm)

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SY - OptoPulse®

ø58 mm

ø6 x 10 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-T - OptoPulse®

ø58 mm

ø8...15 mm (through hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580-B

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-SC

ø58 mm

ø10 x 20 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-SY

ø58 mm

ø6 x 10 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-T

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580P-B

ø58 mm

ø8...15 mm (blind hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-SC

ø58 mm

ø10 x 20 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-SY

ø58 mm

ø6 x 10 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-T

ø58 mm

ø8...15 mm (through hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

BRIH 40 - EcoMag

ø40 mm

ø6 mm (blind hollow shaft)

ø12 mm (blind hollow shaft)

2 … 1024

Antivalent

Push-pull short-circuit proof

BRIV 30 - EcoMag

ø30 mm

ø5 mm solid shaft

2 … 1024

Antivalent

Push-pull short-circuit proof

BRIV 30R - EcoMag

ø30 mm

ø6 mm solid shaft

ø8 mm solid shaft

2 … 1024

Antivalent

Push-pull short-circuit proof

BDH

ø55 mm

ø10 mm solid shaft (clamping flange)

10 … 5000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDH - HighRes

ø55 mm

ø10 mm solid shaft (clamping flange)

7200 … 320000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDK

ø30 mm

ø5 mm solid shaft

10 … 2048

Linedriver/RS422

Push-pull short-circuit proof

BDT

ø58 mm

ø6 mm solid shaft (synchro flange)

10 … 5000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDT - HighRes

ø58 mm

ø6 mm solid shaft (synchro flange)

7200 … 320000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BMMV-58K

ø58 mm

ø6 mm solid shaft (synchro flange)

1000 … 5000

SinCos 1 Vpp

3. Bearingless encoders

  • Wearfree magnetic sensing technology
  • Space-saving short mounting depth
  • Reliable especially in most demanding environments
  • Incremental and absolute variants

Incremental bearingless encoders

MDFK / ITDx9 / MIR

  • For shafts up to 740 mm
  • Square wave and SinCos signals
  • Up to 524 288 pulses
  • Up to 32 768 sine periods

Absolute bearingless encoders

HDmag MHAD / MHAP / MAGRES EAM

  • For shafts up to 340 mm
  • SSI, CANopen, Analog interface
  • Singleturn resolution up to 17 bits
  • Additional square wave or SinCos signals
  • Redundant product variants

Absolute multiturn kit encoders

MAGRES EAM

  • For shafts up to 12 mm (axial sensing)
  • SSI, CANopen, CANopen Lift, SAE J1939, Analog, Profinet Interface
  • Singleturn resolution up to 14 bits
  • Multiturn resolution up to 18 bits

High-resolution magnetic belt encoder for large shaft diameters

HDmag MQR3000F / MIR3000F

  • For shafts up to 3183 mm
  • SSI interface, square wave or SinCos signals
  • Singleturn resolution ≤ 24 bits
  • Up to 131 072 ppr
  • Additional speed signal via SSI
  • Installed anywhere on the shaft,  no free shaft end required

Analog magnetic rotary encoders

  • Absolute acquisition of part location up to 360° rotary angle
  • High resolution up to 0.09°
  • Linearized, analog output signal
  • Wear-free and tolerant to dirt

Linear magnetic encoders

4. Motor feedback encoders

  • Precise optical sensing – for optimal signal and control quality in your application
  • Selection flexibility by wide variety of electrical and mechanical interfaces
  • Compact designs of 36 mm minimum save time and space in installation
  • High-performance digital interface with one-cable technology (available soon)

5. HeavyDuty encoders absolute

  • Highly robust HeavyDuty mechanics and innovative technology
  • Precise, optical or magnetic scanning
  • Extensive interface portfolio and additional incremental signals
  • Maintenance-free, energy harvesting HeavyDuty revolution counter – without battery, without gearbox

6. HeavyDuty encoders incremental

  • Unrivalled service life and reliability – the original Hübner Berlin
  • Proven HeavyDuty design with double-sided bearing setup
  • Precise speed signals for improved process control and process quality
  • Minimizing time and cost-intensive downtime
  • Benefit from more than 60 years of experience of the world market leader

Các thiết bị khac của hãng Baumer :cảm biến Baumer,  cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, cảm biến từ Baumer

The post Encoder Baumer appeared first on thietbicongnghiepnang.com.

]]>
Đại lý cung cấp Baumer tại Việt Nam | Baumer Vietnam

Encoder Baumer Vietnam, Encoder xung Baumer, Encoder motor, Bộ đếm xung encoder, Bộ mã hóa vòng quay Baumer

Rotary encoders

Measuring and monitoring of rotary speed and rotary shaft positions at machines, installations and electrical drives

1. Encoder tuyệt đối Baumer | Industrial encoders absolute

  • Magnetic or optical sensing
  • Always the best technology for your application
  • All relevant signal interfaces & shaft versions
  • Wide and convenient selection
  • Compact designs 28 … 58 mm
  • Time- & space-saving installation
Product name Size (flange) Shaft type Steps per revolution Number of revolutions
EAL580-B - EtherCAT - OptoTurn

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-B - EtherNet/IP - OptoTurn®

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-B - PROFINET - OptoTurn®

ø58 mm

ø10...15 mm (blind hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-SC - EtherCAT - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-SC - EtherNet/IP - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-SC - PROFINET - OptoTurn®

ø58 mm

ø10 x 20 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-SV - EtherCAT - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-SV - EtherNet/IP - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-SV - PROFINET - OptoTurn®

ø58 mm

ø6 x 10 mm, solid shaft with flat

≤262144 /18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAL580-T - EtherCAT - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherCAT

EAL580-T - EtherNet/IP - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

EtherNet/IP

EAL580-T - PROFINET - OptoTurn®

ø58 mm

ø10...14 mm (through hollow shaft)

≤262144 / 18 bit (adjustable)

≤65536 / 16 bit (adjustable)

PROFINET IO

EAM280 - analog

ø48 mm, housing 28.6 mm

ø6 mm, solid shaft with flat

Push-on coupling

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM280 - CANopen®

ø48 mm, housing 28.6 mm

ø6 mm, solid shaft with flat

Push-on coupling

≤16384 / 14 bit

CANopen®

EAM360-B - CANopen® - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-B - SSI - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360-K - CANopen® - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-K - SSI - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360-S - CANopen® - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

EAM360-S - SSI - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM360R-B - analog - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-B - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM360R-K - analog - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-K - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM360R-S - analog - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

EAM360R-S - CANopen®/SAE J1939 - MAGRES

ø36 mm

ø10 x 16 mm, solid shaft with flat

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

SAE J1939

EAM580-B - CANopen® - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®CANopen®-LiftCANopen® + incremental

EAM580-B - PROFINET - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤65536 / 16 bit

PROFINET IO

EAM580-B - SSI - MAGRES

ø58 mm

ø10...15 mm (blind hollow shaft)

≤16384 / 14 bit

≤262144 / 18 bit

SSI

SSI + incremental

EAM580-K - CANopen® - MAGRES

ø58 mm

ø6 mm (magnet bore)

ø8 mm (magnet bore)

ø12 mm (magnet bore)

≤16384 / 14 bit

≤262144 / 18 bit

CANopen®

CANopen®-Lift

CANopen® + incremental

2. Industrial encoders incremental

  • Compact in size
  • Robust and modular design
  • From 24 mm design on to 85 mm hollow shaft diameter
  • Precise optical or robust magnetic sensing
  • All common installation options, HTL, TTL and SinCos output signals
Product name Size (flange) Shaft type Pulses/waves per revolution Output stages

EIL580-B - Option 6301

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-B - OptoPulse®

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-S1 - OptoPulse®

ø115 mm

ø11 x 30  mm solid shaft with woodruff key

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SC - OptoPulse®

ø58 mm

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SQ - OptoPulse®

2.5 x 2.5" (63.5 x 63.5 mm)

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-SY - OptoPulse®

ø58 mm

ø6 x 10 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-T - Option 6301

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580-T - OptoPulse®

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

EIL580P-B - OptoPulse®

ø58 mm

ø8...15 mm (blind hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SC - OptoPulse®

ø58 mm

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SQ - OptoPulse®

2.5 x 2.5" (63.5 x 63.5 mm)

ø10 x 20 mm, solid shaft with flat

ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-SY - OptoPulse®

ø58 mm

ø6 x 10 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

EIL580P-T - OptoPulse®

ø58 mm

ø8...15 mm (through hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580-B

ø58 mm

ø8...15 mm (blind hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-SC

ø58 mm

ø10 x 20 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-SY

ø58 mm

ø6 x 10 mm, solid shaft with flat

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580-T

ø58 mm

ø8...15 mm (through hollow shaft)

100 … 5000

TTL/RS422

HTL/push-pull

ExEIL580P-B

ø58 mm

ø8...15 mm (blind hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-SC

ø58 mm

ø10 x 20 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-SY

ø58 mm

ø6 x 10 mm, solid shaft with flat

1 … 65536

TTL/RS422

HTL/push-pull

ExEIL580P-T

ø58 mm

ø8...15 mm (through hollow shaft)

1 … 65536

TTL/RS422

HTL/push-pull

BRIH 40 - EcoMag

ø40 mm

ø6 mm (blind hollow shaft)

ø12 mm (blind hollow shaft)

2 … 1024

Antivalent

Push-pull short-circuit proof

BRIV 30 - EcoMag

ø30 mm

ø5 mm solid shaft

2 … 1024

Antivalent

Push-pull short-circuit proof

BRIV 30R - EcoMag

ø30 mm

ø6 mm solid shaft

ø8 mm solid shaft

2 … 1024

Antivalent

Push-pull short-circuit proof

BDH

ø55 mm

ø10 mm solid shaft (clamping flange)

10 … 5000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDH - HighRes

ø55 mm

ø10 mm solid shaft (clamping flange)

7200 … 320000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDK

ø30 mm

ø5 mm solid shaft

10 … 2048

Linedriver/RS422

Push-pull short-circuit proof

BDT

ø58 mm

ø6 mm solid shaft (synchro flange)

10 … 5000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BDT - HighRes

ø58 mm

ø6 mm solid shaft (synchro flange)

7200 … 320000

Antivalent

Push-pull short-circuit proof

Push-pull antiv. short-circuit proof

BMMV-58K

ø58 mm

ø6 mm solid shaft (synchro flange)

1000 … 5000

SinCos 1 Vpp

3. Bearingless encoders

  • Wearfree magnetic sensing technology
  • Space-saving short mounting depth
  • Reliable especially in most demanding environments
  • Incremental and absolute variants

Incremental bearingless encoders

MDFK / ITDx9 / MIR

  • For shafts up to 740 mm
  • Square wave and SinCos signals
  • Up to 524 288 pulses
  • Up to 32 768 sine periods

Absolute bearingless encoders

HDmag MHAD / MHAP / MAGRES EAM

  • For shafts up to 340 mm
  • SSI, CANopen, Analog interface
  • Singleturn resolution up to 17 bits
  • Additional square wave or SinCos signals
  • Redundant product variants

Absolute multiturn kit encoders

MAGRES EAM

  • For shafts up to 12 mm (axial sensing)
  • SSI, CANopen, CANopen Lift, SAE J1939, Analog, Profinet Interface
  • Singleturn resolution up to 14 bits
  • Multiturn resolution up to 18 bits

High-resolution magnetic belt encoder for large shaft diameters

HDmag MQR3000F / MIR3000F

  • For shafts up to 3183 mm
  • SSI interface, square wave or SinCos signals
  • Singleturn resolution ≤ 24 bits
  • Up to 131 072 ppr
  • Additional speed signal via SSI
  • Installed anywhere on the shaft,  no free shaft end required

Analog magnetic rotary encoders

  • Absolute acquisition of part location up to 360° rotary angle
  • High resolution up to 0.09°
  • Linearized, analog output signal
  • Wear-free and tolerant to dirt

Linear magnetic encoders

4. Motor feedback encoders

  • Precise optical sensing – for optimal signal and control quality in your application
  • Selection flexibility by wide variety of electrical and mechanical interfaces
  • Compact designs of 36 mm minimum save time and space in installation
  • High-performance digital interface with one-cable technology (available soon)

5. HeavyDuty encoders absolute

  • Highly robust HeavyDuty mechanics and innovative technology
  • Precise, optical or magnetic scanning
  • Extensive interface portfolio and additional incremental signals
  • Maintenance-free, energy harvesting HeavyDuty revolution counter – without battery, without gearbox

6. HeavyDuty encoders incremental

  • Unrivalled service life and reliability – the original Hübner Berlin
  • Proven HeavyDuty design with double-sided bearing setup
  • Precise speed signals for improved process control and process quality
  • Minimizing time and cost-intensive downtime
  • Benefit from more than 60 years of experience of the world market leader

Các thiết bị khac của hãng Baumer :cảm biến Baumer,  cảm biến lực Baumer, cảm biến tiệm cận Baumer, cảm biến siêu âm Baumer, bộ đếm xung Baumer, cảm biến từ Baumer

]]>
Thiết bị đo lưu lượng CS Instruments | Flow meter Cs Instruments http://thietbicongnghiepnang.com/thiet-bi-do-luu-luong-cs-instruments 2019-05-24 10:19:29 http://thietbicongnghiepnang.com/thiet-bi-do-luu-luong-cs-instruments

Nhà phân phối thiết bị đo lưu lượng CS Instruments chính hãng tại Việt Nam

Readmore

Đại lý phân phối thiết bị đo lưu lượng CS Instrument | CS Instrument Vietnam

Đồng hồ đo lưu lượng CS Instrument | CS Instrument Việt Nam

VA 525 CS Instrument | Flow sensor with integrated flow straightener / no inlet sections necessary

Thiết bị đo lưu lượng khí CS Instrument

The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. Due to its reasonable price and modern digital interfaces this compact in-line flow sensor is used when many machines (compressed air consumers) are to be integrated as easily as possible into an energy monitoring network.

The high-contrast, integrated display also displays the current values rotated by 180° if desired (very useful for overhead installation). Depending on the configuration, two of the following values can be displayed:

  • Current consumption in m³/h, l / min, ...
  • Total consumption (meter reading) in m³, l, kg
  • Temperature measurement
  • Optional: Pressure measurement

Special advantages of the flow sensor VA 525

  • Compact, small design - for use in machines, behind maintenance unit at the end user
  • Optionally with classic analogue signals (4...20 mA and pulse) or digital interfaces such as Modbus RTU, Ethernet (also PoE), M-Bus
  • All interfaces are programmable via the display

VA 550 CS Instrument | Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

VA 570 CS Instrument - Flow meter with integrated measuring section

Flow meter VA 570 is supplied with an integrated measuring section for compressed air and gas pipes. The measuring sections are available in flanged version or with R resp. NPT thread.

Flow sensor for compressed air and gas - VA 500

Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000.

VA 520 - Mass Flow Meter for Compressed Air and Gas 

Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements

The post Thiết bị đo lưu lượng CS Instruments | Flow meter Cs Instruments appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối thiết bị đo lưu lượng CS Instrument | CS Instrument Vietnam

Đồng hồ đo lưu lượng CS Instrument | CS Instrument Việt Nam

VA 525 CS Instrument | Flow sensor with integrated flow straightener / no inlet sections necessary

Thiết bị đo lưu lượng khí CS Instrument

The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. Due to its reasonable price and modern digital interfaces this compact in-line flow sensor is used when many machines (compressed air consumers) are to be integrated as easily as possible into an energy monitoring network.

The high-contrast, integrated display also displays the current values rotated by 180° if desired (very useful for overhead installation). Depending on the configuration, two of the following values can be displayed:

  • Current consumption in m³/h, l / min, ...
  • Total consumption (meter reading) in m³, l, kg
  • Temperature measurement
  • Optional: Pressure measurement

Special advantages of the flow sensor VA 525

  • Compact, small design - for use in machines, behind maintenance unit at the end user
  • Optionally with classic analogue signals (4...20 mA and pulse) or digital interfaces such as Modbus RTU, Ethernet (also PoE), M-Bus
  • All interfaces are programmable via the display

VA 550 CS Instrument | Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

VA 570 CS Instrument - Flow meter with integrated measuring section

Flow meter VA 570 is supplied with an integrated measuring section for compressed air and gas pipes. The measuring sections are available in flanged version or with R resp. NPT thread.

Flow sensor for compressed air and gas - VA 500

Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000.

VA 520 - Mass Flow Meter for Compressed Air and Gas 

Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements

]]>
CSMSTR Modular Controller Redlion http://thietbicongnghiepnang.com/csmstr-modular-controller-redlion 2019-05-22 20:52:49 http://thietbicongnghiepnang.com/csmstr-modular-controller-redlion

TMP VIETNAM - Đại lý phân phối thiết bị Redlion chính hãng tại Việt Nam, switch mạng công nghiệp, bộ điều khiển PID Redlion

Readmore

Đại lý phân phối RedLion chính tại Việt Nam | Red Lion Vietnam

PID Controllers | Bộ điều khiển PID Red Lion | Red Lion Vietnam

Overview:
Red Lion's CSMSTR Modular Controller allows for a custom controller to be configured for unique applications. The CSMSTR allows up to 16 slave modules to be connected and powered by a single master controller.

Performance:
The Modular Controller provides a platform that can be updated to operate in a wide variety of applications by simply plugging in I/O modules that meet the requirements of the application. Upon installation of modules, the CSMSTR automatically identifies and addresses connected slave modules simplifying deployments and reducing technical requirements. The CSMSTR automatically configures modules if they are replaced, by storing configuration files of each associated module.

Communication:
The CSMSTR Modular Controller provides two high-speed RS-232 serial ports, one RS-422/485 communication port and one 10/100Base-T(X) Ethernet port for connection to PCs, PLCs, and SCADA systems. An extensive list of master and slave protocol drivers are available to allow the CSMSTR to share and exchange variable data with external devices.

Options:
The CSMSTR offers a virtual HMI feature allowing for monitoring and control of an HMI from any networked PC. The virtual HMI is available in two different resolutions (320 x 240 or 640 x 480). For higher performance applications, an expansion slot with increased SDRAM is available.

Products: 

PART # TITLE
CSMSTRV2 CSMSTRV2 - Control and Communication
CSMSTRLE CSMSTRLE - Protocol Converter
CSMSTRSX CSMSTRSX - Data Logger/Web Server, Virtual HMI, QVGA
CSMSTRGT CSMSTRGT - Data Logger/Web Server, Virtual HMI, VGA
CSMSTRZR CSMSTRZR - High Performance Protocol Converter, Data Logger

The post CSMSTR Modular Controller Redlion appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối RedLion chính tại Việt Nam | Red Lion Vietnam

PID Controllers | Bộ điều khiển PID Red Lion | Red Lion Vietnam

Overview:
Red Lion's CSMSTR Modular Controller allows for a custom controller to be configured for unique applications. The CSMSTR allows up to 16 slave modules to be connected and powered by a single master controller.

Performance:
The Modular Controller provides a platform that can be updated to operate in a wide variety of applications by simply plugging in I/O modules that meet the requirements of the application. Upon installation of modules, the CSMSTR automatically identifies and addresses connected slave modules simplifying deployments and reducing technical requirements. The CSMSTR automatically configures modules if they are replaced, by storing configuration files of each associated module.

Communication:
The CSMSTR Modular Controller provides two high-speed RS-232 serial ports, one RS-422/485 communication port and one 10/100Base-T(X) Ethernet port for connection to PCs, PLCs, and SCADA systems. An extensive list of master and slave protocol drivers are available to allow the CSMSTR to share and exchange variable data with external devices.

Options:
The CSMSTR offers a virtual HMI feature allowing for monitoring and control of an HMI from any networked PC. The virtual HMI is available in two different resolutions (320 x 240 or 640 x 480). For higher performance applications, an expansion slot with increased SDRAM is available.

Products: 

PART # TITLE
CSMSTRV2 CSMSTRV2 - Control and Communication
CSMSTRLE CSMSTRLE - Protocol Converter
CSMSTRSX CSMSTRSX - Data Logger/Web Server, Virtual HMI, QVGA
CSMSTRGT CSMSTRGT - Data Logger/Web Server, Virtual HMI, VGA
CSMSTRZR CSMSTRZR - High Performance Protocol Converter, Data Logger
]]>
Switch mạng 17 cổng Redlion | Red lion Vietnam http://thietbicongnghiepnang.com/switch-mang-17-cong-redlion 2019-05-21 23:01:33 http://thietbicongnghiepnang.com/switch-mang-17-cong-redlion

Công Ty Tăng Minh Phát - Đại lý phân phối thiết bị mạng của hãng Redlion tại Việt Nam

Readmore

Đại lý phân phối RedLion chính tại Việt Nam | Red Lion Vietnam

Hub chia mạng 17 cổng Redlion, Switch chia mạng redlion, thiết bị mạng Redlion, Hub mạng công nghiệp, Bộ chia mạng Redlion

Switch chia mạng Redlion | Ethernet Switch

Switch chia mạng 17 cổng Redlion | UNMANAGED SWITCH

PART # TOTAL PORTS 10/100 100 FIBER 10/100/1000 OPERATING TEMP FIBER TYPE DISTANCE RATING
317FXE-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
317FXE-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
317FX-SC 17 16 1 - -40° to 85°C Multimode 2km
517FXE-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
517FXE-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
517FX-ST 17 16 1 - -40° to 85°C Multimode 2km
517FX-SC 17 16 1 - -40° to 85°C Multimode 2km
317FX-ST 17 16 1 - -40° to 85°C Multimode 2km
517FXE-ST-80 17 16 1 - -40° to 85°C Singlemode 80km

Bộ chia mạng 17 cổng Redlion | MONITORED SWITCH 

PART # PORTSsort descending 10/100 100 FIBER 10/100/1000 OPERATING TEMP TYPE DISTANCE RATING
517FX-N-ST 17 16 1 - -40° to 85°C Multimode 2km
517FX-N-SC 17 16 1 - -40° to 85°C Multimode 2km
517FXE-N-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-N-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-N-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-N-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-N-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-N-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FX-N-ST 17 16 1 - -40° to 85°C Multimode 2km
317FX-N-SC 17 16 1 - -40° to 85°C Multimode 2km
317FXE-N-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
317FXE-N-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-N-ST-15 17 16 1 - -40° to 85°C Singlemode 15km

Hub mạng 17 port Redlion | MANAGED SWITCH 

PART # PORTS 10/100 10/100/1000 100 FIBER GIG FIBER GIG SFP TYPE DISTANCE    OPERATING TEMP    
517FXE-A-SC-15 17 16 - 1 - - Singlemode 15km -40° to 85°C
517FX-A-ST 17 16 - 1 - - Multimode 2km -40° to 85°C
517FX-A-SC 17 16 - 1 - - Multimode 2km -40° to 85°C
517FXE-A-ST-80 17 16 - 1 - - Singlemode 80km -40° to 85°C
517FXE-A-ST-40 17 16 - 1 - - Singlemode 40km -40° to 85°C
517FXE-A-ST-15 17 16 - 1 - - Singlemode 15km -40° to 85°C
517FXE-A-SC-80 17 16 - 1 - - Singlemode 80km -40° to 85°C
517FXE-A-SC-40 17 16 - 1 - - Singlemode 40km -40° to 85°C

The post Switch mạng 17 cổng Redlion | Red lion Vietnam appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối RedLion chính tại Việt Nam | Red Lion Vietnam

Hub chia mạng 17 cổng Redlion, Switch chia mạng redlion, thiết bị mạng Redlion, Hub mạng công nghiệp, Bộ chia mạng Redlion

Switch chia mạng Redlion | Ethernet Switch

Switch chia mạng 17 cổng Redlion | UNMANAGED SWITCH

PART # TOTAL PORTS 10/100 100 FIBER 10/100/1000 OPERATING TEMP FIBER TYPE DISTANCE RATING
317FXE-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
317FXE-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
317FX-SC 17 16 1 - -40° to 85°C Multimode 2km
517FXE-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
517FXE-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
517FX-ST 17 16 1 - -40° to 85°C Multimode 2km
517FX-SC 17 16 1 - -40° to 85°C Multimode 2km
317FX-ST 17 16 1 - -40° to 85°C Multimode 2km
517FXE-ST-80 17 16 1 - -40° to 85°C Singlemode 80km

Bộ chia mạng 17 cổng Redlion | MONITORED SWITCH 

PART # PORTSsort descending 10/100 100 FIBER 10/100/1000 OPERATING TEMP TYPE DISTANCE RATING
517FX-N-ST 17 16 1 - -40° to 85°C Multimode 2km
517FX-N-SC 17 16 1 - -40° to 85°C Multimode 2km
517FXE-N-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-N-ST-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-N-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FXE-N-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-N-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-SC-80 17 16 1 - -40° to 85°C Singlemode 80km
517FXE-N-SC-40 17 16 1 - -40° to 85°C Singlemode 40km
517FXE-N-SC-15 17 16 1 - -40° to 85°C Singlemode 15km
317FX-N-ST 17 16 1 - -40° to 85°C Multimode 2km
317FX-N-SC 17 16 1 - -40° to 85°C Multimode 2km
317FXE-N-ST-80 17 16 1 - -40° to 85°C Singlemode 80km
317FXE-N-ST-40 17 16 1 - -40° to 85°C Singlemode 40km
317FXE-N-ST-15 17 16 1 - -40° to 85°C Singlemode 15km

Hub mạng 17 port Redlion | MANAGED SWITCH 

PART # PORTS 10/100 10/100/1000 100 FIBER GIG FIBER GIG SFP TYPE DISTANCE    OPERATING TEMP    
517FXE-A-SC-15 17 16 - 1 - - Singlemode 15km -40° to 85°C
517FX-A-ST 17 16 - 1 - - Multimode 2km -40° to 85°C
517FX-A-SC 17 16 - 1 - - Multimode 2km -40° to 85°C
517FXE-A-ST-80 17 16 - 1 - - Singlemode 80km -40° to 85°C
517FXE-A-ST-40 17 16 - 1 - - Singlemode 40km -40° to 85°C
517FXE-A-ST-15 17 16 - 1 - - Singlemode 15km -40° to 85°C
517FXE-A-SC-80 17 16 - 1 - - Singlemode 80km -40° to 85°C
517FXE-A-SC-40 17 16 - 1 - - Singlemode 40km -40° to 85°C
]]>
Van lấy mẫu Keofitt | Keofitt Vietnam http://thietbicongnghiepnang.com/van-lay-mau-keofitt-keofitt-vietnam 2019-05-11 12:12:41 http://thietbicongnghiepnang.com/van-lay-mau-keofitt-keofitt-vietnam

Công Ty Tăng Minh Phát - Nhà phân phối van Keofitt chính hãng tại Việt Nam

Readmore

Keofitt Vietnam

Keofitt  được thành lập năm 1980, có trụ sở chính đặt tại Đan Mạch

Keofitt nổi lên như nhà sản xuất hàng đầu về van dùng trong phòng sạch (HVAC), được sử dụng phổ biến trong ngành công nghiệp chế biến, nước giải khát, bia.

Van lấy mẫu Keofitt | Van Keofitt | Keofitt Vietnam

Van lấy mẫu SESAME KEOFITT

Taking the successful design of the classic Keofitt valves to the third millennium: The patented Keofitt Sesame is the only steam-sterilizable sampling valve in the world to completely eliminate the usually unavoidable dead-space involved with the steam-inlet connection.

The KEOFITT SESAME Sampling Valve is KEOFITT’s newest and patented dual-seat sampling valve. Truly unique in the market, it offers optimal CIP and SIP conditions while also incorporating steam supply control and completely eliminating the steam inlet dead-space in other designs

  • Medical Solutions
  • Filtered and Unfiltered Beer
  • Creams and Lotions
  • Unprocessed Milk
ART.NO. 890001
SESAME BODY TYPE T
ART.NO. 890003
SESAME BODY TYPE C2
ART.NO. 890005
SESAME BODY TYPE C2" w/TC
ART.NO. 890006
SESAME BODY TYPE T w/TC
ART.NO. 890007
SESAME BODY TYPE T w/WL
ART.NO. 890008
SESAME BODY VARIVENT Ø50
ART.NO. 890009
SESAME BODY VARIVENT Ø68
ART.NO. 890010
SESAME BODY TYPE P w/TC
ART.NO. 890011
SESAME BODY TYPE P 1"
ART.NO. 890013
SESAME TRI-CLAMP VARIVENT Ø68
ART.NO. 890014
SESAME VALVE BODY TYPE P NW25
ART.NO. 890021
SESAME BODY TYPE C1
ART.NO. 890022
SESAME BODY TYPE C1" w/TC
ART.NO. 890036
SESAME BODY TYPE MINI CLAMP
ART.NO. 890039
SESAME BODY TYPE MINI CLAMP w/TC

Van lấy mẫu Classic Keofitt

Van lấy mẫu M4 Keofitt - Van lấy mẫu M9 Keofitt - Van lấy mẫu M15 Keofitt - Van lấy mẫu M25 Keofitt

The W9™ is the standard Keofitt® sampling valve, the valve others are measured to. Designed for sampling medium viscosity products, with particles up to 3 mm in diameter, if fitted with PTFE membrane and 2mm when fitted with silicone or EPDM membrane. W9™ valves are mostly used for products that have about 0-1,000cP in viscosity.

The W9™ valve is used in a range of applications such as breweries, dairies, pharmaceutical and biotechnological industries, with wide range of products such as:

  • Unprocessed Milk
  • Medical solutions
  • Filtered and unfiltered beer
  • Perfume
  • Creams and lotions

ART.NO. 850001
VALVE BODY W9 TYPE T
ART.NO. 850003
VALVE BODY W9 TYPE C 2" ASME/DIN
ART.NO. 850004
VALVE BODY W9 TYPE C 3" ASME/DIN
ART.NO. 850005
VALVE BODY W9 TYPE C2" DIN MINITRI-CLAMP
ART.NO. 850006
VALVE BODY W9 TYPE T w/TC
ART.NO. 850007
VALVE BODY W9 TYPE T WELDING ENDS
ART.NO. 850008
VALVE BODY W9 VARIVENT Ø50
ART.NO. 850009
VALVE BODY W9 VARIVENT Ø68
ART.NO. 850010
VALVE BODY W9 TYPE P w/TC
ART.NO. 850011
VALVE BODY W9 TYPE P
ART.NO. 850013
VALVE BODY W9 VARIVENT Ø68 
ART.NO. 850014
VALVE BODY W9 TYPE P NW25
ART.NO. 850015
VALVE BODY W9 T THREAD M16x1.5
ART.NO. 850016
VALVE BODY W9 P THREAD M16x1.5
ART.NO. 850018
VALVE BODY W9 P NW25 THREAD M16x1.5
ART.NO. 850019
VALVE BODY W9 TYPE P WELDING ENDS
ART.NO. 850020
VALVE BODY W9 VARIVENT Ø50 MINITRI-CLAMP
ART.NO. 850021
VALVE BODY W9 C 1" ASME/DIN
ART.NO. 850022
VALVE BODY W9 C 1" DIN MINI TRI-CLAMP
ART.NO. 850024
VALVE BODY W9 C1" ASME/DIN THREADM16x1.5
ART.NO. 850025
VALVE BODY W9 C1" ASME/DIN MINITRI-CLAMP
ART.NO. 850026
VALVE BODY W9 C2" ASME/DIN MINITRI-CLAMP
ART.NO. 850027
W9 IN-LINE VERTICAL ON REQUEST ONLY
ART.NO. 850028
W9 IN-LINE HORIZONTAL ON REQUEST ONLY
ART.NO. 850031
VALVE BODY W9 S
ART.NO. 850036

VALVE BODY W9 MINI TRI-CLAMP
ART.NO. 850037
VALVE BODY W9 S THREAD M16x1.5
ART.NO. 850039
VALVE BODY W9 C ½" MINI TRI-CLAMP
ART.NO. 850040
VALVE BODY W9 UNION DN10 DIN 11851
ART.NO. 850015
VALVE BODY W9 T THREAD M16x1.5

Van lấy mẫu Simplex Keofitt

The Keofitt Simplex Sampling Valve is our product category for process CIPable sampling valves for less demanding applications that require no separate inlet for sterilizing or sanitizing media.

This valve is designed for sampling of low or medium viscosity products in the range of 0-1,000 cP with particles less than 2 mm in diameter.

Simplex™ is used for for simple, hygienic sampling in all industries for products such as:

  • Water
  • Unprocessed Milk
  • Perfume
  • Fruit Juice
ART.NO. 830141
SIMPLEX VALVE TYPE T/H
ART.NO. 830144
SIMPLEX VALVE TYPE T/N
ART.NO. 830541
SIMPLEX VALVE TYPE C 2"/H
ART.NO. 830544
SIMPLEX VALVE TYPE C 2"/N
ART.NO. 830941
SIMPLEX VALVE VARIVENT Ø68/H
ART.NO. 830944
SIMPLEX VALVE VARIVENT Ø68/N
ART.NO. 831141
SIMPLEX VALVE TYPE P/H
ART.NO. 831144
SIMPLEX VALVE TYPE P/N
ART.NO. 832141
SIMPLEX VALVE TYPE MINI TRI
ART.NO. 832144
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N
ART.NO. 832241
SIMPLEX VALVE TYPE C 1" DIN/H
ART.NO. 832244
SIMPLEX VALVE TYPE C 1" DIN/N
ART.NO. 830141.2
SIMPLEX VALVE TYPE T/H WELDING ENDS
ART.NO. 831141.2
SIMPLEX VALVE TYPE P/H WELDING ENDS
ART.NO. 830141.2 EPDM
SIMPLEX VALVE TYPE T/H WELDING ENDS EPDM

ART.NO. 83014

EPDM
SIMPLEX VALVE TYPE T/H EPDM


ART.NO. 830144

EPDM
SIMPLEX VALVE TYPE T/N EPDM

ART.NO. 830541

EPDM
SIMPLEX VALVE TYPE C 2"/H EPDM

ART.NO. 830544

EPDM
SIMPLEX VALVE TYPE C 2"/N EPDM

ART.NO. 830941

EPDM
SIMPLEX VALVE VARIVENT Ø68/H EPDM

ART.NO. 831141.2

EPDM
SIMPLEX VALVE TYPE P/H WELDING ENDS EPDM

ART.NO. 831141

EPDM
SIMPLEX VALVE TYPE P/H EPDM

ART.NO. 831144

EPDM
SIMPLEX VALVE TYPE P/N EPDM

ART.NO. 832141

EPDM
SIMPLEX VALVE TYPE MINI TRI-CLAMP/H EPDM

ART.NO. 832144

EPDM
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N EPDM

ART.NO. 832241

EPDM
SIMPLEX VALVE TYPE C 1" DIN/H EPDM

ART.NO. 832244

EPDM
SIMPLEX VALVE TYPE C 1" DIN/N EPDM

ART.NO. 830141.2

PTFE
SIMPLEX VALVE TYPE T/H WELDING ENDS PTFE

ART.NO. 830141

PTFE
SIMPLEX VALVE TYPE T/H PTFE

ART.NO. 830144

PTFE
SIMPLEX VALVE TYPE T/N PTFE

ART.NO. 830541

PTFE
SIMPLEX VALVE TYPE C 2"/H PTFE

ART.NO. 830544

PTFE
SIMPLEX VALVE TYPE C 2"/N PTFE

ART.NO. 830941

PTFE
SIMPLEX VALVE VARIVENT Ø68/H PTFE

ART.NO. 830944

PTFE
SIMPLEX VALVE VARIVENT Ø68/N PTFE

ART.NO. 831141.2

PTFE
SIMPLEX VALVE TYPE P/H WELDING ENDS PTFE

ART.NO. 831144

PTFE
SIMPLEX VALVE TYPE P/N PTFE

ART.NO. 832141

PTFE
SIMPLEX VALVE TYPE MINI TRI-CLAMP/H PTFE

ART.NO. 832144

PTFE
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N PTFE

ART.NO. 832241

PTFE
SIMPLEX VALVE TYPE C 1" DIN/H PTFE


ART.NO. 832244

PTFE
SIMPLEX VALVE TYPE C 1" DIN/N PTFE

The post Van lấy mẫu Keofitt | Keofitt Vietnam appeared first on thietbicongnghiepnang.com.

]]>
Keofitt Vietnam

Keofitt  được thành lập năm 1980, có trụ sở chính đặt tại Đan Mạch

Keofitt nổi lên như nhà sản xuất hàng đầu về van dùng trong phòng sạch (HVAC), được sử dụng phổ biến trong ngành công nghiệp chế biến, nước giải khát, bia.

Van lấy mẫu Keofitt | Van Keofitt | Keofitt Vietnam

Van lấy mẫu SESAME KEOFITT

Taking the successful design of the classic Keofitt valves to the third millennium: The patented Keofitt Sesame is the only steam-sterilizable sampling valve in the world to completely eliminate the usually unavoidable dead-space involved with the steam-inlet connection.

The KEOFITT SESAME Sampling Valve is KEOFITT’s newest and patented dual-seat sampling valve. Truly unique in the market, it offers optimal CIP and SIP conditions while also incorporating steam supply control and completely eliminating the steam inlet dead-space in other designs

  • Medical Solutions
  • Filtered and Unfiltered Beer
  • Creams and Lotions
  • Unprocessed Milk
ART.NO. 890001
SESAME BODY TYPE T
ART.NO. 890003
SESAME BODY TYPE C2
ART.NO. 890005
SESAME BODY TYPE C2" w/TC
ART.NO. 890006
SESAME BODY TYPE T w/TC
ART.NO. 890007
SESAME BODY TYPE T w/WL
ART.NO. 890008
SESAME BODY VARIVENT Ø50
ART.NO. 890009
SESAME BODY VARIVENT Ø68
ART.NO. 890010
SESAME BODY TYPE P w/TC
ART.NO. 890011
SESAME BODY TYPE P 1"
ART.NO. 890013
SESAME TRI-CLAMP VARIVENT Ø68
ART.NO. 890014
SESAME VALVE BODY TYPE P NW25
ART.NO. 890021
SESAME BODY TYPE C1
ART.NO. 890022
SESAME BODY TYPE C1" w/TC
ART.NO. 890036
SESAME BODY TYPE MINI CLAMP
ART.NO. 890039
SESAME BODY TYPE MINI CLAMP w/TC

Van lấy mẫu Classic Keofitt

Van lấy mẫu M4 Keofitt - Van lấy mẫu M9 Keofitt - Van lấy mẫu M15 Keofitt - Van lấy mẫu M25 Keofitt

The W9™ is the standard Keofitt® sampling valve, the valve others are measured to. Designed for sampling medium viscosity products, with particles up to 3 mm in diameter, if fitted with PTFE membrane and 2mm when fitted with silicone or EPDM membrane. W9™ valves are mostly used for products that have about 0-1,000cP in viscosity.

The W9™ valve is used in a range of applications such as breweries, dairies, pharmaceutical and biotechnological industries, with wide range of products such as:

  • Unprocessed Milk
  • Medical solutions
  • Filtered and unfiltered beer
  • Perfume
  • Creams and lotions

ART.NO. 850001
VALVE BODY W9 TYPE T
ART.NO. 850003
VALVE BODY W9 TYPE C 2" ASME/DIN
ART.NO. 850004
VALVE BODY W9 TYPE C 3" ASME/DIN
ART.NO. 850005
VALVE BODY W9 TYPE C2" DIN MINITRI-CLAMP
ART.NO. 850006
VALVE BODY W9 TYPE T w/TC
ART.NO. 850007
VALVE BODY W9 TYPE T WELDING ENDS
ART.NO. 850008
VALVE BODY W9 VARIVENT Ø50
ART.NO. 850009
VALVE BODY W9 VARIVENT Ø68
ART.NO. 850010
VALVE BODY W9 TYPE P w/TC
ART.NO. 850011
VALVE BODY W9 TYPE P
ART.NO. 850013
VALVE BODY W9 VARIVENT Ø68 
ART.NO. 850014
VALVE BODY W9 TYPE P NW25
ART.NO. 850015
VALVE BODY W9 T THREAD M16x1.5
ART.NO. 850016
VALVE BODY W9 P THREAD M16x1.5
ART.NO. 850018
VALVE BODY W9 P NW25 THREAD M16x1.5
ART.NO. 850019
VALVE BODY W9 TYPE P WELDING ENDS
ART.NO. 850020
VALVE BODY W9 VARIVENT Ø50 MINITRI-CLAMP
ART.NO. 850021
VALVE BODY W9 C 1" ASME/DIN
ART.NO. 850022
VALVE BODY W9 C 1" DIN MINI TRI-CLAMP
ART.NO. 850024
VALVE BODY W9 C1" ASME/DIN THREADM16x1.5
ART.NO. 850025
VALVE BODY W9 C1" ASME/DIN MINITRI-CLAMP
ART.NO. 850026
VALVE BODY W9 C2" ASME/DIN MINITRI-CLAMP
ART.NO. 850027
W9 IN-LINE VERTICAL ON REQUEST ONLY
ART.NO. 850028
W9 IN-LINE HORIZONTAL ON REQUEST ONLY
ART.NO. 850031
VALVE BODY W9 S
ART.NO. 850036

VALVE BODY W9 MINI TRI-CLAMP
ART.NO. 850037
VALVE BODY W9 S THREAD M16x1.5
ART.NO. 850039
VALVE BODY W9 C ½" MINI TRI-CLAMP
ART.NO. 850040
VALVE BODY W9 UNION DN10 DIN 11851
ART.NO. 850015
VALVE BODY W9 T THREAD M16x1.5

Van lấy mẫu Simplex Keofitt

The Keofitt Simplex Sampling Valve is our product category for process CIPable sampling valves for less demanding applications that require no separate inlet for sterilizing or sanitizing media.

This valve is designed for sampling of low or medium viscosity products in the range of 0-1,000 cP with particles less than 2 mm in diameter.

Simplex™ is used for for simple, hygienic sampling in all industries for products such as:

  • Water
  • Unprocessed Milk
  • Perfume
  • Fruit Juice
ART.NO. 830141
SIMPLEX VALVE TYPE T/H
ART.NO. 830144
SIMPLEX VALVE TYPE T/N
ART.NO. 830541
SIMPLEX VALVE TYPE C 2"/H
ART.NO. 830544
SIMPLEX VALVE TYPE C 2"/N
ART.NO. 830941
SIMPLEX VALVE VARIVENT Ø68/H
ART.NO. 830944
SIMPLEX VALVE VARIVENT Ø68/N
ART.NO. 831141
SIMPLEX VALVE TYPE P/H
ART.NO. 831144
SIMPLEX VALVE TYPE P/N
ART.NO. 832141
SIMPLEX VALVE TYPE MINI TRI
ART.NO. 832144
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N
ART.NO. 832241
SIMPLEX VALVE TYPE C 1" DIN/H
ART.NO. 832244
SIMPLEX VALVE TYPE C 1" DIN/N
ART.NO. 830141.2
SIMPLEX VALVE TYPE T/H WELDING ENDS
ART.NO. 831141.2
SIMPLEX VALVE TYPE P/H WELDING ENDS
ART.NO. 830141.2 EPDM
SIMPLEX VALVE TYPE T/H WELDING ENDS EPDM

ART.NO. 83014

EPDM
SIMPLEX VALVE TYPE T/H EPDM


ART.NO. 830144

EPDM
SIMPLEX VALVE TYPE T/N EPDM

ART.NO. 830541

EPDM
SIMPLEX VALVE TYPE C 2"/H EPDM

ART.NO. 830544

EPDM
SIMPLEX VALVE TYPE C 2"/N EPDM

ART.NO. 830941

EPDM
SIMPLEX VALVE VARIVENT Ø68/H EPDM

ART.NO. 831141.2

EPDM
SIMPLEX VALVE TYPE P/H WELDING ENDS EPDM

ART.NO. 831141

EPDM
SIMPLEX VALVE TYPE P/H EPDM

ART.NO. 831144

EPDM
SIMPLEX VALVE TYPE P/N EPDM

ART.NO. 832141

EPDM
SIMPLEX VALVE TYPE MINI TRI-CLAMP/H EPDM

ART.NO. 832144

EPDM
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N EPDM

ART.NO. 832241

EPDM
SIMPLEX VALVE TYPE C 1" DIN/H EPDM

ART.NO. 832244

EPDM
SIMPLEX VALVE TYPE C 1" DIN/N EPDM

ART.NO. 830141.2

PTFE
SIMPLEX VALVE TYPE T/H WELDING ENDS PTFE

ART.NO. 830141

PTFE
SIMPLEX VALVE TYPE T/H PTFE

ART.NO. 830144

PTFE
SIMPLEX VALVE TYPE T/N PTFE

ART.NO. 830541

PTFE
SIMPLEX VALVE TYPE C 2"/H PTFE

ART.NO. 830544

PTFE
SIMPLEX VALVE TYPE C 2"/N PTFE

ART.NO. 830941

PTFE
SIMPLEX VALVE VARIVENT Ø68/H PTFE

ART.NO. 830944

PTFE
SIMPLEX VALVE VARIVENT Ø68/N PTFE

ART.NO. 831141.2

PTFE
SIMPLEX VALVE TYPE P/H WELDING ENDS PTFE

ART.NO. 831144

PTFE
SIMPLEX VALVE TYPE P/N PTFE

ART.NO. 832141

PTFE
SIMPLEX VALVE TYPE MINI TRI-CLAMP/H PTFE

ART.NO. 832144

PTFE
SIMPLEX VALVE TYPE MINI TRI-CLAMP/N PTFE

ART.NO. 832241

PTFE
SIMPLEX VALVE TYPE C 1" DIN/H PTFE


ART.NO. 832244

PTFE
SIMPLEX VALVE TYPE C 1" DIN/N PTFE

]]>
Cảm biến đo mức VEGA http://thietbicongnghiepnang.com/cam-bien-do-muc-vega 2019-03-15 15:20:51 http://thietbicongnghiepnang.com/cam-bien-do-muc-vega

Nhà phân phối thiết bị đo mức VEGA chính hãng tại Việt Nam

Readmore

Tăng Minh Phát - Chuyên cung cấp giải pháp và thiết bị đo mức dùng trong công nghiệp

Cảm biến đo mức : chất lỏng (nước, hóa chất..), chất rắn ( hạt, bột, xi măng...)

1. Cảm biến đo mức là gì ?

2. Ứng dụng của cảm biến đo mức

3. Các loại cảm biến mức trong công nghiệp

a. Cảm biến đo mức bằng sóng Radar

b. Cảm biến đo mức bằng sóng siêu âm

c. Cảm biến đo mức điện dung

d. Cảm biến đo mức thủy tĩnh

2. Cảm biến đo mức bằng sóng Radar VEGA

Cảm biến đo mức radar (VEGAPULS Series) được sử dụng để đo mức không tiếp xúc của chất lỏng và chất rắn. VEGAPULS đo tất cả các loại chất lỏng, ngay cả dưới áp suất cao và nhiệt độ khắc nghiệt. Chúng có thể được sử dụng trong các chất lỏng đơn giản cũng như các chất lỏng đặc biệt (mỡ cá, mật ong, xăng dầu...) và phù hợp cho các ứng dụng có yêu cầu vệ sinh nghiêm ngặt.

Ưu điểm đo mức bằng sóng Radar

  • Độ chính xác cao
  • Không bị ảnh hưởng bởi nhiệt độ, áp suất hoặc bụi
  • Điều chỉnh thân thiện với người dùng giúp tiết kiệm thời gian

VEGAPULS 61

For simple process conditions

VEGAPULS 62

In extreme temperatures and pressures

VEGAPULS 63

For aggressive liquids or under hygienic requirements

VEGAPULS 64

All-round radar instrument with 80 GHz – the frequency of the future

VEGAPULS 65

For aggressive liquids under simple process conditions

VEGAPULS 68

In extreme temperatures and pressures

VEGAPULS 66

In extreme temperatures and pressures

VEGAPULS 69

All-round radar instrument with 80 GHz – the frequency of the future

VEGAPULS 67

For simple process conditions

VEGAPULS WL 61

Radar level sensor for water management

VEGAPULS SR 68

Standard radar sensor

VEGAPULS WL S 61

Radar level sensor for water management

PS67.RXBAEHAMAX, PS61.XMAGPHKMXX, PS66.CXHFK2HAMXV, PSSR68.XXD1O2BRMXX, PS66.XXJFI3HKMAX, PS65.UXMFDHKNAX, PS68.XXKGD2HAMXX, PS67.XXBAEHKNAX , PS68-XXEGD2HAMAK , PS68.CXEGD2HKMXX , PS66.XXHFK3HKMXX, PS61.XXBYDVDMXX, PS65.XXLFKHKMAX, PS61.CXAGPHAMXX, PS65.UFLAIHKNAX,  PSWL61.XXBXXHKTX, PSWL61.XXBXDHKTX, PSSR68.XXBGD2BDMAX, PSSR68.XXBGD2BDMXX , PS61.XXBXXHKMXX, PS66.XXAFC2HAMAX, PSSR68.RXE1Q2HAMAV, PS65.XXLFKVDMAX, PS66.XXHFK3VDMAX, PS67XXBXCHKMXX, PS61 XXAGPHKMAX, PS67.XXBXXHKMAX, PS62.XXEFKCHAMXX , PS62.XXEFKCHAMAX , PS67.XXBAEHKMXX, PS68.CXEFE2HAMAX, PS61.XXANPHKNAX, PSWL61.XXBXXHKAX, PSSR68.XXEGD2HAMAX, PSSR68.XXEGD2HAMXX, PS61.XXAGPHKMXX , PS68.RXEGD2HAMAX , PS61.XXBXXHAMXX

3. Cảm biến đo mức bằng sóng siêu âm VEGA

  • Cảm biến siêu âm VEGA có thiết bị nhỏ gọn, dễ cài đặt và lắp đặt.
  • Chi phí bảo dưỡng thấp
  • Tuổi thọ sử dụng cao

VEGASON 61

Measures liquids up to 5 m and bulk solids up to 2 m away

VEGASON 62

Measures liquids up to 8 m and bulk solids up to 3.5 m away

VEGASON 63

Measures liquids up to 15 m and bulk solids up to 7 m away

Model : SON63XXABHAMA, SONS61.EXXX, SON62.XXAGHKMXX, SON65.XXAFPVDMAX, S0N61.XXAGHKMXX, SON63.XXAAVDMXX

4. Cảm biến đo mức điện dung VEGA

  • Cảm biến điện dung đo mức không có điểm mù trên toàn bộ chiều dài cảm biến
  • Cảm biến VEGACAL cách điện hoàn toàn, có thể sử trong cả 2 môi trường dẫn điện và không dẫn điện 
  • Chiều dài que đo 6 - 32m

VEGACAL 62 : Rod probe, partly PTFE insulated

VEGACAL 63 : Rod probe, fully PE or PTFE insulated

VEGACAL 64 : Rod probe, fully FEP insulated

VEGACAL 65 : Cable probe, partly PTFE insulated

VEGACAL 66 : Cable probe, fully PTFE insulated

VEGACAL 67 : Rod probe, partly ceramic insulated

VEGACAL 69 : Double rod probe, fully FEP insulated

Model : CAL63.XXFGDHKMAX, CAL63-XXFGDHKMXX, SWING63.DANBVTUR, CL63.XXFGDHKMAX, CL65.XXLGDHKMAX, CL63.CAFGSHKMAX, CAP65.XXKGCTKMX, CAP65.XXKGCRKMX

5. Cảm biến đo mức thủy tĩnh VEGA

VEGABAR 81 : With chemical seal, for high temperatures

VEGABAR 82 : The all-rounder with ceramic measuring cell

VEGABAR 83 : With metallic measuring cell, for high pressures

VEGABAR 86 : With ceramic measuring cell

VEGABAR 87 : With metallic measuring cell

VEGADIF 85 : With metallic measuring diaphragm

VEGAWELL 52 : With ceramic measuring cell

Model : 

SN61.XXAGHKNXX, SN62.XXANHAMAX, SN62.XXAGHKNAX, SN61.CXAGHKMAX, SN62.CXAGHANAX, SN62.CMAGHKMAX, SN62.XXANHKMAX, SN64.XXBASVDMA, SN61.XXAGHAMAX, SN62.XXAGHAMAX

VB63.XXAGCRKMX, VB61.XXAGGTKMX, VB61.XXAGDTKMX, VB63.XXANCCKNX, VB61.XXAGDRAMX, VB61.GXAGDRAMX, VB63.XXANDRKMX

FX61.CXAGB1HAMAX, FX61.GXANC1HDMAX, FX61.CMAGB1HKMXX, FX62.XXAGD1HKMXX, FX61.XXANB1HKMXX, FX62.XXAGD1HAMXX, FX63.XXECDHAMXX, FX62.XXAGD1HAMAX

SWING61.DANBVXMRX, SWING63.DAGBVXUR, SWING63.DAGBVXUR, SWING61.XXGBVXPTX

FLEX61.XXAGB2HAMAX, FLEX61.XXAGB2HAMAX

CP62.XXAGSRKMX, CP62-XXAGARKMXX, CP65.XXKGST8MX, CP62.XXAGST8MX, CP62.XXAGDZKMX

SG51.XXSGATPM, SG51.XASGATPVL, SG51.XXSGBTPMS

MET381.XX, MET391.XXHXX

WL52.XXA4ATD1DC2X, WL52.XXA4ATD1DC2X, WL52.AXGADTD1BC1X, WE63.LKAGDRANX, WE63.XXAGDRANX, WELL52.AXA4ALD1CD1X, WELL52.XXA4AKD1DD2X,DIS61.CXKMA, DIS61.XXKMA

### TAG

cảm biến đo mức nước dạng điện cực, cảm biến đo mức nước dạng phao tuyến tính, cảm biến đo mức chất lỏng, cảm biến đo mức dầu, cảm biến đo mức, cảm biến đo mức xăng dầu, cảm biến đo mức nhiên liệu, cảm biến đo mức nước dạng phao, các loại cảm biến đo mức nước, cảm biến đo mức axit, cảm biến siêu âm đo mức chất lỏng, cảm biến đo mức nước kiểu điện dung, cảm biến đo mức chất rắn, cảm biến đo mức nước điện cực, các loại cảm biến đo mức chất lỏng, cảm biến áp suất đo mức nước, cảm biến đo mức bằng điện dung, cảm biến đo mức xăng, cảm biến đo mức nước siêu âm, cảm biến đo mức nước liên tục

The post Cảm biến đo mức VEGA appeared first on thietbicongnghiepnang.com.

]]>
Tăng Minh Phát - Chuyên cung cấp giải pháp và thiết bị đo mức dùng trong công nghiệp

Cảm biến đo mức : chất lỏng (nước, hóa chất..), chất rắn ( hạt, bột, xi măng...)

1. Cảm biến đo mức là gì ?

2. Ứng dụng của cảm biến đo mức

3. Các loại cảm biến mức trong công nghiệp

a. Cảm biến đo mức bằng sóng Radar

b. Cảm biến đo mức bằng sóng siêu âm

c. Cảm biến đo mức điện dung

d. Cảm biến đo mức thủy tĩnh

2. Cảm biến đo mức bằng sóng Radar VEGA

Cảm biến đo mức radar (VEGAPULS Series) được sử dụng để đo mức không tiếp xúc của chất lỏng và chất rắn. VEGAPULS đo tất cả các loại chất lỏng, ngay cả dưới áp suất cao và nhiệt độ khắc nghiệt. Chúng có thể được sử dụng trong các chất lỏng đơn giản cũng như các chất lỏng đặc biệt (mỡ cá, mật ong, xăng dầu...) và phù hợp cho các ứng dụng có yêu cầu vệ sinh nghiêm ngặt.

Ưu điểm đo mức bằng sóng Radar

  • Độ chính xác cao
  • Không bị ảnh hưởng bởi nhiệt độ, áp suất hoặc bụi
  • Điều chỉnh thân thiện với người dùng giúp tiết kiệm thời gian

VEGAPULS 61

For simple process conditions

VEGAPULS 62

In extreme temperatures and pressures

VEGAPULS 63

For aggressive liquids or under hygienic requirements

VEGAPULS 64

All-round radar instrument with 80 GHz – the frequency of the future

VEGAPULS 65

For aggressive liquids under simple process conditions

VEGAPULS 68

In extreme temperatures and pressures

VEGAPULS 66

In extreme temperatures and pressures

VEGAPULS 69

All-round radar instrument with 80 GHz – the frequency of the future

VEGAPULS 67

For simple process conditions

VEGAPULS WL 61

Radar level sensor for water management

VEGAPULS SR 68

Standard radar sensor

VEGAPULS WL S 61

Radar level sensor for water management

PS67.RXBAEHAMAX, PS61.XMAGPHKMXX, PS66.CXHFK2HAMXV, PSSR68.XXD1O2BRMXX, PS66.XXJFI3HKMAX, PS65.UXMFDHKNAX, PS68.XXKGD2HAMXX, PS67.XXBAEHKNAX , PS68-XXEGD2HAMAK , PS68.CXEGD2HKMXX , PS66.XXHFK3HKMXX, PS61.XXBYDVDMXX, PS65.XXLFKHKMAX, PS61.CXAGPHAMXX, PS65.UFLAIHKNAX,  PSWL61.XXBXXHKTX, PSWL61.XXBXDHKTX, PSSR68.XXBGD2BDMAX, PSSR68.XXBGD2BDMXX , PS61.XXBXXHKMXX, PS66.XXAFC2HAMAX, PSSR68.RXE1Q2HAMAV, PS65.XXLFKVDMAX, PS66.XXHFK3VDMAX, PS67XXBXCHKMXX, PS61 XXAGPHKMAX, PS67.XXBXXHKMAX, PS62.XXEFKCHAMXX , PS62.XXEFKCHAMAX , PS67.XXBAEHKMXX, PS68.CXEFE2HAMAX, PS61.XXANPHKNAX, PSWL61.XXBXXHKAX, PSSR68.XXEGD2HAMAX, PSSR68.XXEGD2HAMXX, PS61.XXAGPHKMXX , PS68.RXEGD2HAMAX , PS61.XXBXXHAMXX

3. Cảm biến đo mức bằng sóng siêu âm VEGA

  • Cảm biến siêu âm VEGA có thiết bị nhỏ gọn, dễ cài đặt và lắp đặt.
  • Chi phí bảo dưỡng thấp
  • Tuổi thọ sử dụng cao

VEGASON 61

Measures liquids up to 5 m and bulk solids up to 2 m away

VEGASON 62

Measures liquids up to 8 m and bulk solids up to 3.5 m away

VEGASON 63

Measures liquids up to 15 m and bulk solids up to 7 m away

Model : SON63XXABHAMA, SONS61.EXXX, SON62.XXAGHKMXX, SON65.XXAFPVDMAX, S0N61.XXAGHKMXX, SON63.XXAAVDMXX

4. Cảm biến đo mức điện dung VEGA

  • Cảm biến điện dung đo mức không có điểm mù trên toàn bộ chiều dài cảm biến
  • Cảm biến VEGACAL cách điện hoàn toàn, có thể sử trong cả 2 môi trường dẫn điện và không dẫn điện 
  • Chiều dài que đo 6 - 32m

VEGACAL 62 : Rod probe, partly PTFE insulated

VEGACAL 63 : Rod probe, fully PE or PTFE insulated

VEGACAL 64 : Rod probe, fully FEP insulated

VEGACAL 65 : Cable probe, partly PTFE insulated

VEGACAL 66 : Cable probe, fully PTFE insulated

VEGACAL 67 : Rod probe, partly ceramic insulated

VEGACAL 69 : Double rod probe, fully FEP insulated

Model : CAL63.XXFGDHKMAX, CAL63-XXFGDHKMXX, SWING63.DANBVTUR, CL63.XXFGDHKMAX, CL65.XXLGDHKMAX, CL63.CAFGSHKMAX, CAP65.XXKGCTKMX, CAP65.XXKGCRKMX

5. Cảm biến đo mức thủy tĩnh VEGA

VEGABAR 81 : With chemical seal, for high temperatures

VEGABAR 82 : The all-rounder with ceramic measuring cell

VEGABAR 83 : With metallic measuring cell, for high pressures

VEGABAR 86 : With ceramic measuring cell

VEGABAR 87 : With metallic measuring cell

VEGADIF 85 : With metallic measuring diaphragm

VEGAWELL 52 : With ceramic measuring cell

Model : 

SN61.XXAGHKNXX, SN62.XXANHAMAX, SN62.XXAGHKNAX, SN61.CXAGHKMAX, SN62.CXAGHANAX, SN62.CMAGHKMAX, SN62.XXANHKMAX, SN64.XXBASVDMA, SN61.XXAGHAMAX, SN62.XXAGHAMAX

VB63.XXAGCRKMX, VB61.XXAGGTKMX, VB61.XXAGDTKMX, VB63.XXANCCKNX, VB61.XXAGDRAMX, VB61.GXAGDRAMX, VB63.XXANDRKMX

FX61.CXAGB1HAMAX, FX61.GXANC1HDMAX, FX61.CMAGB1HKMXX, FX62.XXAGD1HKMXX, FX61.XXANB1HKMXX, FX62.XXAGD1HAMXX, FX63.XXECDHAMXX, FX62.XXAGD1HAMAX

SWING61.DANBVXMRX, SWING63.DAGBVXUR, SWING63.DAGBVXUR, SWING61.XXGBVXPTX

FLEX61.XXAGB2HAMAX, FLEX61.XXAGB2HAMAX

CP62.XXAGSRKMX, CP62-XXAGARKMXX, CP65.XXKGST8MX, CP62.XXAGST8MX, CP62.XXAGDZKMX

SG51.XXSGATPM, SG51.XASGATPVL, SG51.XXSGBTPMS

MET381.XX, MET391.XXHXX

WL52.XXA4ATD1DC2X, WL52.XXA4ATD1DC2X, WL52.AXGADTD1BC1X, WE63.LKAGDRANX, WE63.XXAGDRANX, WELL52.AXA4ALD1CD1X, WELL52.XXA4AKD1DD2X,DIS61.CXKMA, DIS61.XXKMA

### TAG

cảm biến đo mức nước dạng điện cực, cảm biến đo mức nước dạng phao tuyến tính, cảm biến đo mức chất lỏng, cảm biến đo mức dầu, cảm biến đo mức, cảm biến đo mức xăng dầu, cảm biến đo mức nhiên liệu, cảm biến đo mức nước dạng phao, các loại cảm biến đo mức nước, cảm biến đo mức axit, cảm biến siêu âm đo mức chất lỏng, cảm biến đo mức nước kiểu điện dung, cảm biến đo mức chất rắn, cảm biến đo mức nước điện cực, các loại cảm biến đo mức chất lỏng, cảm biến áp suất đo mức nước, cảm biến đo mức bằng điện dung, cảm biến đo mức xăng, cảm biến đo mức nước siêu âm, cảm biến đo mức nước liên tục

]]>
Cảm biến đo mức bằng sóng Radar Matsushima - Đại lý Matsushima Việt Nam http://thietbicongnghiepnang.com/cam-bien-do-muc-bang-song-radar-matsushima 2019-03-11 12:02:20 http://thietbicongnghiepnang.com/cam-bien-do-muc-bang-song-radar-matsushima

Cảm biến Radar dùng để đo mức Matsushima

Cảm biến đo mức bằng sóng Radar Matsushima - Đại lý Matsushima Việt Nam

Readmore

Đại lý Matsushima Việt Nam | Matsushima Vietnam

Cảm biến Radar đo mức Matsushima 

For Continuous measurement of powder, solid, liquid Radar Level Transmitter Matsushima 

Cảm biến đo mức bằng sóng Radar - Cảm biến đo mức Matsushima Việt Nam 

Cảm biến đo mức Matsushima thường được sử dụng trong các bồn chứa xi măng, bồ chứa bột, bồn hóa chất, bồn chứa chất lỏng...

1. RADAR LEVEL TRANSMITTER (FOR POWDER)

# Cảm biến radar đo mức chất rắn Matsushima

Cảm biến đo mức bột Matsushima 

Đo mức chất rắn ( xi măng, bột,...)
- Thang đo : 0.3 đến 70.0m
- Độ chính xác :  ±0.25% F.S.

The Radar Level Transmitter is designed specitically for medium/long range measurement of all kinds of power,particle and bulk solids.The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

2. RADAR LEVEL TRANSMITTER (FOR LIQUID)

 Cảm biến đo mức chất lỏng bằng Radar Matsushima

Cảm biến đo mức chất lỏng Matsushima - Matsushima Việt Nam

Đo mức chất lỏng ( nước, xăng, dầu, hóa chất...)
- Thang đo : 0.3 m đến 10.0m
- Độ chính xác : ±0.25% F.S.

The Radar Level Transmitter is designed specitically for short/medium range measurement of liquid,sludge and slurry.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

# Model RADAR LEVEL TRANSMITTER Matsushima  - Đại lý Matsushima tại Việt Nam

MWLM-PR26C1G MWLM-PR26H3F
MWLM-PR26H1G MWLM-PR26H3S
MWLM-PR26H2G MWLM-PR26H7G
MWLM-PR26H2F MWLM-PR26H7F
MWLM-PR26H3G MWLM-PR26H7S

The post Cảm biến đo mức bằng sóng Radar Matsushima - Đại lý Matsushima Việt Nam appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Matsushima Việt Nam | Matsushima Vietnam

Cảm biến Radar đo mức Matsushima 

For Continuous measurement of powder, solid, liquid Radar Level Transmitter Matsushima 

Cảm biến đo mức bằng sóng Radar - Cảm biến đo mức Matsushima Việt Nam 

Cảm biến đo mức Matsushima thường được sử dụng trong các bồn chứa xi măng, bồ chứa bột, bồn hóa chất, bồn chứa chất lỏng...

1. RADAR LEVEL TRANSMITTER (FOR POWDER)

# Cảm biến radar đo mức chất rắn Matsushima

Cảm biến đo mức bột Matsushima 

Đo mức chất rắn ( xi măng, bột,...)
- Thang đo : 0.3 đến 70.0m
- Độ chính xác :  ±0.25% F.S.

The Radar Level Transmitter is designed specitically for medium/long range measurement of all kinds of power,particle and bulk solids.The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

2. RADAR LEVEL TRANSMITTER (FOR LIQUID)

 Cảm biến đo mức chất lỏng bằng Radar Matsushima

Cảm biến đo mức chất lỏng Matsushima - Matsushima Việt Nam

Đo mức chất lỏng ( nước, xăng, dầu, hóa chất...)
- Thang đo : 0.3 m đến 10.0m
- Độ chính xác : ±0.25% F.S.

The Radar Level Transmitter is designed specitically for short/medium range measurement of liquid,sludge and slurry.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

# Model RADAR LEVEL TRANSMITTER Matsushima  - Đại lý Matsushima tại Việt Nam

MWLM-PR26C1G MWLM-PR26H3F
MWLM-PR26H1G MWLM-PR26H3S
MWLM-PR26H2G MWLM-PR26H7G
MWLM-PR26H2F MWLM-PR26H7F
MWLM-PR26H3G MWLM-PR26H7S
]]>
Van bướm GEMU 487 - GEMU 487 Butterfly Valve - Gemu Vietnam http://thietbicongnghiepnang.com/van-buom-gemu-487-butterfly-valve-gemu-vietnam 2019-03-08 17:38:28 http://thietbicongnghiepnang.com/van-buom-gemu-487-butterfly-valve-gemu-vietnam

GEMU 487 Butterfly Valve - Gemu VietNam

Readmore

Đại lý phân phối van Gemu tại Việt Nam | Gemu Vietnam

Van bướm Gemu

GEMU 487 - Nhà cung cấp Gemu Việt Nam

Van bướm Gemu 487 - Butterfly Valve GEMU 487 

Manually operated butterfly valve

Description

The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in the nominal sizes DN 25–600 and in various body versions – wafer, lug and U section.

Features

  • Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW)
  • Low torques
  • Simple installation
  • Modular construction
  • Extensive applications using a variety of materials
  • Advanced seal design - even for larger diameters
  • Body coating in accordance with ISO 12944-6 C5-M
  • Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

The post Van bướm GEMU 487 - GEMU 487 Butterfly Valve - Gemu Vietnam appeared first on thietbicongnghiepnang.com.

]]>
Đại lý phân phối van Gemu tại Việt Nam | Gemu Vietnam

Van bướm Gemu

GEMU 487 - Nhà cung cấp Gemu Việt Nam

Van bướm Gemu 487 - Butterfly Valve GEMU 487 

Manually operated butterfly valve

Description

The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in the nominal sizes DN 25–600 and in various body versions – wafer, lug and U section.

Features

  • Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW)
  • Low torques
  • Simple installation
  • Modular construction
  • Extensive applications using a variety of materials
  • Advanced seal design - even for larger diameters
  • Body coating in accordance with ISO 12944-6 C5-M
  • Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination
]]>
VM6800 Ohkura - Bộ ghi dữ liệu VM6800 Ohkura - Ohkura VietNam http://thietbicongnghiepnang.com/vm6800-ohkura-bo-ghi-du-lieu-vm6800-ohkura 2019-03-08 14:51:48 http://thietbicongnghiepnang.com/vm6800-ohkura-bo-ghi-du-lieu-vm6800-ohkura

PAPERLESS RECORDER

Readmore

Bộ ghi dữ liệu điện áp, dòng điện, nhiệt độ, điện trở VM6800 OHKURA - Ohkura VietNam

PAPERLESS RECORDER VM6800 Ohkura - Đại lý Ohkura Việt Nam

Bộ ghi dữ liệu 18 cổng, Bộ ghi dữ liệu 27 cổng

This is a paperless recorder that displays measured data on the LCD in real time and stores data in CompactFlash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 36 channels at the maximum. The data stored in CompactFlash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.)

The post VM6800 Ohkura - Bộ ghi dữ liệu VM6800 Ohkura - Ohkura VietNam appeared first on thietbicongnghiepnang.com.

]]>
Bộ ghi dữ liệu điện áp, dòng điện, nhiệt độ, điện trở VM6800 OHKURA - Ohkura VietNam

PAPERLESS RECORDER VM6800 Ohkura - Đại lý Ohkura Việt Nam

Bộ ghi dữ liệu 18 cổng, Bộ ghi dữ liệu 27 cổng

This is a paperless recorder that displays measured data on the LCD in real time and stores data in CompactFlash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 36 channels at the maximum. The data stored in CompactFlash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.)

]]>
Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM http://thietbicongnghiepnang.com/dai-ly-tdklambda-tai-viet-nam-tmp-vietnam 2019-03-03 23:52:24 http://thietbicongnghiepnang.com/dai-ly-tdklambda-tai-viet-nam-tmp-vietnam

Công Ty Tăng Minh Phát - Đại lý phân phối thiết bị TDK Lambda chính hãng tại Việt Nam, chuyên cung cấp bộ nguồn, bộ lọc nhiễu, bộ chuyển đổi tín hiệu.

Readmore

Đại lý cung cấp TDK Lambda tại Việt Nam 

TDK Lambda được thành lập từ năm 1970, có trụ sở chính đặt tại Janpan ( Nhật Bản).

Công ty Tăng Minh Phát hân hạnh là Đại lý phân phối thiết bị của hãng TDK Lambda tại Việt Nam.

Các sản phẩm chính của TDK Lambda Vietnam : Bộ nguồn TDK Lambda, Bộ lọc nhiễu TDK Lambda, Bộ chuyển đổi DC-DC TDK Lambda

1. Bộ nguồn TDK Lambda | Power Supply | Bộ nguồn Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS200/LD TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS350M TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS HD TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

RTW TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS240RC-24

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS ME

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

SWS600/1000L

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CSW65

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DLP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

TPS3000

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CM4

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DPP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS-P

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Vega

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

XMS500

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRF

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

JWT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Vega-Lite

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS30M/CUS60M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRF/HL

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KAS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZMS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS1500M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRL

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRB

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DSP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KMS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZPSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

QM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KPSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWD

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

RWS-B

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DTM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KWD

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWQ

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Alpha 1000-1500 (CA)

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EFE

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KWS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-B

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CFE400M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EFE-M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

LS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-BAF

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CPFE

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EVS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

LZSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-BP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CPFE1000FI

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

FPS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

MTW

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWX

Bộ nguồn HWS TDK Lambda Bộ nguồn Lambda

2. Bộ lọc nhiễu TDK-Lambda | Filters TDKLambda

         Bộ lọc EMC TDK Lambda, Bộ lọc EMI TDK Lambda, Bộ lọc EMI Việt Nam, Bộ lọc EMC Việt Nam, Bộ lọc nhiễu EMC TDK Lambda, Bộ lọc nhiễu EMI TDK Lambda, Bộ lọc nhiễu EMI Việt Nam, Bộ lọc nhiễu EMC Việt Nam, Bộ lọc EMC, Bộ lọc EMI, Bộ lọc sóng hài TDK Lambda, Bộ lọc sóng hài, Bộ lọc nhiễu RSHN TDK Lambda, Bộ lọc nhiễu RSEN TDK Lambda

Model Detail
iDQ 48VDC EMI Filters
IEC Inlet Series EMC Filters
EMC Filters PAN Series
R Series 0.5 to 1000A, 250 to 500VAC EMI Filters
RDEN Series 50A 48VDC (76V Max) EMI Filters
SIFI Series 2-Line EMC Filters

3. Bộ chuyển đổi DC-DC TDK Lambda | Converters DC-DC TDK Lambda

Model Detail
EZA11kW 11,000W Bi-Directional DC-DC Converter
CCG 15 - 30W DC-DC Converters
CC-E 1.5W-25W Single & Dual DC-DC converters
CC-P-E 15W-30W DC-DC converters
CE1000 1.75W-30W DC-DC POL converters
CN-A 30W-200W Half & Quarter Brick DC-DC converters
DPX DINRail mount DC-DC converters
EZA2500-32048 2500W Bi-Directional DC-DC Converter
GQA 120W Industrial Quarter Brick Converters
HQA 85W - 120W Harsh Environment Quarter Brick Converters
i3A 100W, 9-53V Input Non-isolated DC-DC Converters
i6A 250W, 9-40V Input Non-isolated DC-DC Converter
iAC 16A DC-DC non-isolated POL converters
iAD 16A POL DC-DC converters
iAF 20A Non-isolated SMT DOSA 2 POL Converters
iAH 40A Non-isolated SMT Point of Load
iBA 8A POL DC-DC converters
iBC 7A POL DC-DC converter
iBD 7A Non Isolated POL DC-DC converters
iBF 12A Non-isolated SMT DOSA 2 POL Converters
iBH 20A Non-isolated SMT Point of Load
iCF 3A Non-isolated SMT DOSA 2 POL Converters
iCG 6A Non-isolated SMT DOSA 2 POL Converters
iCH 85W, 12A Non-isolated SMT Point of Load
iEA 67W-78W Eighth Brick DC-DC converters
iEH 300-317W Eighth Brick Converter
iFB 557-600W Isolated DC-DC Converters
iHG 50-300W Half Brick DC-DC converters
iJA 35A Non-isolated SMT Point of Load with PMBus
iJB 60A Non-isolated SMT POL with PMBusTM
iJC 100A Non-isolated SMT Point of Load with PMBus™
iPB 15-45W Pico Brick DC-DC converters
iQB 25-150W Quarter Brick DC-DC converters
iQE 108-204W Quarter Brick DC_DC converter
iQG 300-504W Quarter Brick DC-DC converters
iQL 72-308W Quarter Brick DC-DC converters
iSA 75-82.5W Sixteenth Brick DC-DC converters
PAE 50W-100W Eighth Brick DC-DC converters
PAF 180W-702W Isolated DC-DC converters
PAH 29W-451W Isolated PCB mount DC-DC converters
PAQ 14W-100W Quarter Brick DC-DC converters
PH 120W-300W Isolated DC-DC converters
PH-A 50W-300W High Density Power Modules
PL 3.75W-100W DC-DC POL converters
PV/PVD Single In-Line DC-DC converters
PXA 15W DC-DC converters
PXB 15W Single & Dual DC-DC converters
PXC 5W Isolated DC-DC converters
PXC-M 3W, 6W & 10W Medical Isolated DC-DC Converters
PXD Isolated PCB mount DC-DC converters
PXE 20W-30W DC-DC Converter
PXF 40W&60W DC-DC converters
Vega DC 450W DC-DC converter

4. Bộ nguồn lập trình TDK-Lambda | Programmable Power Supplies

Model  Detail
GENESYS+™ GSP 10kW in 2U & 15kW in 3U
GENESYS+™ 1.7kW & 5kW in 1U
Genesys™ 1U 750W, 1.5kW & 2.4kW Rack Mount power supply
Genesys™ 1U Half rack 750W 1U Half Rack Mount power supply
Genesys™ 2U 3.3kW and 5kW Rack Mount power supply
Genesys™ 3U 10kW and 15kW Rack Mount power supply
Z+ 2U 200W, 400W, 600W and 800W Bench or Rack Mount Power Supply
ZUP Programmable Rack Bench Mount power supply

List kho TDK Lamba

No

DESCRIPTION

Maker

Qty

Unit

1

HWS100A-24/A

TDK-Lambda

10

PC

2

HWS150A-24/A

TDK-Lambda

20

PC

3

HWS300-24

TDK-Lambda

5

PC

4

HWS600-24

TDK-Lambda

3

PC

5

HWS600-24/HD

TDK-Lambda

2

PC

6

GWS500-24

TDK-Lambda

2

PC

7

HMS100-24

TDK-Lambda

2

PC

8

RSHN-2006

TDK-Lambda

20

PC

9

RSEN-2006

TDK-Lambda

20

PC

10

RSEN-2006D

TDK-Lambda

10

PC

11

RSEN-2010D

TDK-Lambda

10

PC

12

RSEN-2016

TDK-Lambda

10

PC

13

RSEN-2016D

TDK-Lambda

5

PC

14

RSEN-2020

TDK-Lambda

10

PC

15

RSEN-2020D

TDK-Lambda

5

PC

16

RSHN-2003

TDK-Lambda

10

PC

17

RSHN-2010

TDK-Lambda

20

PC

18

RSHN-2016

TDK-Lambda

10

PC

19

RSHN-2020

TDK-Lambda

10

PC

20

RSHN-2030

TDK-Lambda

5

PC

21

RSHN-2040

TDK-Lambda

5

PC

22

RSHN-2060

TDK-Lambda

2

PC

>>>Quay lại mục lục

The post Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]>
Đại lý cung cấp TDK Lambda tại Việt Nam 

TDK Lambda được thành lập từ năm 1970, có trụ sở chính đặt tại Janpan ( Nhật Bản).

Công ty Tăng Minh Phát hân hạnh là Đại lý phân phối thiết bị của hãng TDK Lambda tại Việt Nam.

Các sản phẩm chính của TDK Lambda Vietnam : Bộ nguồn TDK Lambda, Bộ lọc nhiễu TDK Lambda, Bộ chuyển đổi DC-DC TDK Lambda

1. Bộ nguồn TDK Lambda | Power Supply | Bộ nguồn Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS200/LD TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS350M TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS HD TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

RTW TDK Lambda

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS240RC-24

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS ME

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

SWS600/1000L

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CSW65

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DLP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

TPS3000

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CM4

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DPP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

HWS-P

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Vega

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

XMS500

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRF

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

JWT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Vega-Lite

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS30M/CUS60M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRF/HL

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KAS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZMS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CUS1500M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRL

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DRB

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DSP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KMS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZPSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

QM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DT

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KPSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWD

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

RWS-B

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

DTM

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KWD

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWQ

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

Alpha 1000-1500 (CA)

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EFE

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

KWS-A

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-B

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CFE400M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EFE-M

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

LS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-BAF

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CPFE

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

EVS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

LZSA

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWS-BP

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

CPFE1000FI

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

FPS

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

MTW

Đại lý TDK-Lambda tại Việt Nam - TMP VIETNAM

ZWX

Bộ nguồn HWS TDK Lambda Bộ nguồn Lambda

2. Bộ lọc nhiễu TDK-Lambda | Filters TDKLambda

         Bộ lọc EMC TDK Lambda, Bộ lọc EMI TDK Lambda, Bộ lọc EMI Việt Nam, Bộ lọc EMC Việt Nam, Bộ lọc nhiễu EMC TDK Lambda, Bộ lọc nhiễu EMI TDK Lambda, Bộ lọc nhiễu EMI Việt Nam, Bộ lọc nhiễu EMC Việt Nam, Bộ lọc EMC, Bộ lọc EMI, Bộ lọc sóng hài TDK Lambda, Bộ lọc sóng hài, Bộ lọc nhiễu RSHN TDK Lambda, Bộ lọc nhiễu RSEN TDK Lambda

Model Detail
iDQ 48VDC EMI Filters
IEC Inlet Series EMC Filters
EMC Filters PAN Series
R Series 0.5 to 1000A, 250 to 500VAC EMI Filters
RDEN Series 50A 48VDC (76V Max) EMI Filters
SIFI Series 2-Line EMC Filters

3. Bộ chuyển đổi DC-DC TDK Lambda | Converters DC-DC TDK Lambda

Model Detail
EZA11kW 11,000W Bi-Directional DC-DC Converter
CCG 15 - 30W DC-DC Converters
CC-E 1.5W-25W Single & Dual DC-DC converters
CC-P-E 15W-30W DC-DC converters
CE1000 1.75W-30W DC-DC POL converters
CN-A 30W-200W Half & Quarter Brick DC-DC converters
DPX DINRail mount DC-DC converters
EZA2500-32048 2500W Bi-Directional DC-DC Converter
GQA 120W Industrial Quarter Brick Converters
HQA 85W - 120W Harsh Environment Quarter Brick Converters
i3A 100W, 9-53V Input Non-isolated DC-DC Converters
i6A 250W, 9-40V Input Non-isolated DC-DC Converter
iAC 16A DC-DC non-isolated POL converters
iAD 16A POL DC-DC converters
iAF 20A Non-isolated SMT DOSA 2 POL Converters
iAH 40A Non-isolated SMT Point of Load
iBA 8A POL DC-DC converters
iBC 7A POL DC-DC converter
iBD 7A Non Isolated POL DC-DC converters
iBF 12A Non-isolated SMT DOSA 2 POL Converters
iBH 20A Non-isolated SMT Point of Load
iCF 3A Non-isolated SMT DOSA 2 POL Converters
iCG 6A Non-isolated SMT DOSA 2 POL Converters
iCH 85W, 12A Non-isolated SMT Point of Load
iEA 67W-78W Eighth Brick DC-DC converters
iEH 300-317W Eighth Brick Converter
iFB 557-600W Isolated DC-DC Converters
iHG 50-300W Half Brick DC-DC converters
iJA 35A Non-isolated SMT Point of Load with PMBus
iJB 60A Non-isolated SMT POL with PMBusTM
iJC 100A Non-isolated SMT Point of Load with PMBus™
iPB 15-45W Pico Brick DC-DC converters
iQB 25-150W Quarter Brick DC-DC converters
iQE 108-204W Quarter Brick DC_DC converter
iQG 300-504W Quarter Brick DC-DC converters
iQL 72-308W Quarter Brick DC-DC converters
iSA 75-82.5W Sixteenth Brick DC-DC converters
PAE 50W-100W Eighth Brick DC-DC converters
PAF 180W-702W Isolated DC-DC converters
PAH 29W-451W Isolated PCB mount DC-DC converters
PAQ 14W-100W Quarter Brick DC-DC converters
PH 120W-300W Isolated DC-DC converters
PH-A 50W-300W High Density Power Modules
PL 3.75W-100W DC-DC POL converters
PV/PVD Single In-Line DC-DC converters
PXA 15W DC-DC converters
PXB 15W Single & Dual DC-DC converters
PXC 5W Isolated DC-DC converters
PXC-M 3W, 6W & 10W Medical Isolated DC-DC Converters
PXD Isolated PCB mount DC-DC converters
PXE 20W-30W DC-DC Converter
PXF 40W&60W DC-DC converters
Vega DC 450W DC-DC converter

4. Bộ nguồn lập trình TDK-Lambda | Programmable Power Supplies

Model  Detail
GENESYS+™ GSP 10kW in 2U & 15kW in 3U
GENESYS+™ 1.7kW & 5kW in 1U
Genesys™ 1U 750W, 1.5kW & 2.4kW Rack Mount power supply
Genesys™ 1U Half rack 750W 1U Half Rack Mount power supply
Genesys™ 2U 3.3kW and 5kW Rack Mount power supply
Genesys™ 3U 10kW and 15kW Rack Mount power supply
Z+ 2U 200W, 400W, 600W and 800W Bench or Rack Mount Power Supply
ZUP Programmable Rack Bench Mount power supply

List kho TDK Lamba

No

DESCRIPTION

Maker

Qty

Unit

1

HWS100A-24/A

TDK-Lambda

10

PC

2

HWS150A-24/A

TDK-Lambda

20

PC

3

HWS300-24

TDK-Lambda

5

PC

4

HWS600-24

TDK-Lambda

3

PC

5

HWS600-24/HD

TDK-Lambda

2

PC

6

GWS500-24

TDK-Lambda

2

PC

7

HMS100-24

TDK-Lambda

2

PC

8

RSHN-2006

TDK-Lambda

20

PC

9

RSEN-2006

TDK-Lambda

20

PC

10

RSEN-2006D

TDK-Lambda

10

PC

11

RSEN-2010D

TDK-Lambda

10

PC

12

RSEN-2016

TDK-Lambda

10

PC

13

RSEN-2016D

TDK-Lambda

5

PC

14

RSEN-2020

TDK-Lambda

10

PC

15

RSEN-2020D

TDK-Lambda

5

PC

16

RSHN-2003

TDK-Lambda

10

PC

17

RSHN-2010

TDK-Lambda

20

PC

18

RSHN-2016

TDK-Lambda

10

PC

19

RSHN-2020

TDK-Lambda

10

PC

20

RSHN-2030

TDK-Lambda

5

PC

21

RSHN-2040

TDK-Lambda

5

PC

22

RSHN-2060

TDK-Lambda

2

PC

>>>Quay lại mục lục

]]>
Màn hình cảm ứng HMI Redlion - Màn hình HMI G3 Redlion http://thietbicongnghiepnang.com/man-hinh-cam-ung-hmi-redlion-man-hinh-hmi-g3-redlion 2019-03-03 17:00:48 http://thietbicongnghiepnang.com/man-hinh-cam-ung-hmi-redlion-man-hinh-hmi-g3-redlion

Màn hình cảm ứng HMI Red Lion 

Màn hình cảm ứng HMI Redlion - Màn hình HMI G3 Redlion

Readmore

Đại lý Redlion Việt Nam - Màn hình HMI Redlion - Redlion Viet Nam 

Màn hình hiển thị Red Lion

From factories to extreme remote locations, Red Lion's HMI operator panels enable customers to easily connect, monitor and control processes across a diverse range of industries that include manufacturing, oil and gas and water/wastewater.

Features Graphite HMIs CR3000 CR1000 G3 HMIs
Serial Ports Up to 4 Up to 4 Up to 2 Up to 4
Ethernet Up to 2 Up to 2 1 1 
USB Host 2  Up to 2 - Select Models
Programmed with Crimson 3 X  - - X
Programmed with Crimson 3.1 X  X X -
C-Type User Programming X  X X X 
Protocol Converter X  X X X 
Simultaneous Conversions (max) 20 15 6 13
Web Server, FTP, Data Logging X  X - X 
Expansion Ports Up to 8 1 - 1 
Temperature Range -20° to 60°C -10° to 50°C -10° to 50°C 0° to 50°C

Hệ thống sử dụng Màn hình HMI Redlion

Màn hình cảm ứng HMI Redlion - Màn hình HMI G3 Redlion

Màn hình cảm ứng HMI Redlion 

Màn hình HMI | Graphite HMIs

Red Lion’s rugged Graphite® operator panels are the industry's first HMI touchscreens to combine all-aluminum construction with an I/O module architecture. All of the Graphite HMI models offer drag-and-drop protocol conversion, data logging and web-based monitoring and control. With UL Class 1, Division 2, ABS, ATEX and IECEx approvals, Graphite HMIs enable customers to connect, monitor and control processes in harsh environments.

PART # DISPLAY SIZE INDOOR/OUTDOOR DISPLAY SERIAL PORTS ETHERNET PORTS EXPANSION
G07C0000 7" Indoor 800 x 480 3 isol. 1 1 SD + 5 Module Slots
G07S0000 7" Outdoor 800 x 480 3 isol. 1 1 SD + 5 Module Slots
G09C0000 9" Indoor 800 x 480 3 isol. 1 1 SD + 6 Module Slots
G09C1000 9" Indoor 800 x 480 3 isol. 2 1 SD + 6 Module Slots
G10C0000 10" Indoor 640 x 480 3 isol. 1 1 SD + 7 Module Slots
G10C1000 10" Indoor 640 x 480 3 isol. 2 1 SD + 7 Module Slots
G10R0000 10" Indoor 800 x 600 3 isol. 1 1 SD + 7 Module Slots
G10R1000 10" Indoor 800 x 600 3 isol. 2 1 SD + 7 Module Slots
G10S0000 10" Outdoor 640 x 480 3 isol. 1 1 SD + 7 Module Slots
G10S1000 10" Outdoor 640 x 480 3 isol. 2 1 SD + 7 Module Slots
G12C0000 12" Indoor 1280 x 800 3 isol. 1 1 SD + 8 Module Slots
G12C1100 12" Indoor 1280 x 800 4 isol. 2 1 SD + 8 Module Slots
G15C0000 15" Indoor 1024 x 768 3 isol. 1 1 SD + 8 Module Slots
G15C1100 15" Indoor 1024 x 768 4 isol. 2 1 SD + 8 Module Slots

G3 HMIs Red Lion | Màn hình cảm ứng G3 Red Lion

The Red Lion G3 HMI operator panels are far more than ordinary HMIs, offering functionality above and beyond the industry standard. The G3s are field proven with a remarkable track record of durability in harsh environments.

PART # DISPLAY SIZE INDOOR/OUTDOOR DISPLAY SERIAL PORTS ETHERNET PORTS EXPANSION CARD SUPPORT USB HOST
G303M000 3" Indoor 128 x 64 3 1 1 CF Card Slot CF Card No
G303S000 3" Outdoor 128 x 64 3 1 1 CF Card Slot CF Card No
G306A000 6" Indoor 320 x 240 3 1 1 CF Card Slot CF Card Expansion Card
G306M000 6" Indoor 320 x 240 3 1 1 CF Card Slot CF Card No
G306MS00 6" Outdoor 320 x 240 3 1 1 CF Card Slot CF Card No
G308A210 8" Indoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G308A230 8" Indoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G308C100 8" Indoor 640 x 480 3 1 1 CF Card Slot CF Card No
G310C210 10" Indoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G310C230 10" Indoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G310R210 10" Indoor 800 x 600 3 isol. 1 1 CF Card Slot CF Card Yes
G310R230 10" Indoor 800 x 600 3 isol. 2 1 CF Card Slot CF Card Yes
G310S210 10" Outdoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G310S230 10" Outdoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G315C210 15" Indoor 1024 x 768 4 isol. 1 1 CF Card Slot CF Card Yes
G315C230 15" Indoor 1024 x 768 4 isol. 2 1 CF Card Slot CF Card

CR1000 and CR3000 HMIs Red Lion

In a market of ever-changing customer requirements and increasing rates of innovation, having equipment that can adapt to meet these needs is important. Red Lion’s CR1000 and CR3000 automation HMIs enable integrators and system designers to cost effectively plan for future reconfiguration or feature upgrades without scrapping existing equipment.

CR1000-04000-00210 4.3 480x272 Yes 2 1 0 1 No No
CR1000-07000-00210 7 800x480 Yes 2 1 0 1 No No
CR1000-10000-00210 10.4 800x600 2 1 0 1 No No
CR3000-04000-00310 4.3 480x272 Yes 3 1 1 1 Yes Yes
CR3000-07000-00420 7 800x480 Yes 4 2 2 1 Yes Yes
CR3000-10000-00420 10.4 800x600 4 2 2 1 Yes Yes
CR3000-15000-00420 15 1024x768 4 2 2 1 Yes Yes

Xem Thêm Chi Tiết : TẠI ĐÂY

The post Màn hình cảm ứng HMI Redlion - Màn hình HMI G3 Redlion appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Redlion Việt Nam - Màn hình HMI Redlion - Redlion Viet Nam 

Màn hình hiển thị Red Lion

From factories to extreme remote locations, Red Lion's HMI operator panels enable customers to easily connect, monitor and control processes across a diverse range of industries that include manufacturing, oil and gas and water/wastewater.

Features Graphite HMIs CR3000 CR1000 G3 HMIs
Serial Ports Up to 4 Up to 4 Up to 2 Up to 4
Ethernet Up to 2 Up to 2 1 1 
USB Host 2  Up to 2 - Select Models
Programmed with Crimson 3 X  - - X
Programmed with Crimson 3.1 X  X X -
C-Type User Programming X  X X X 
Protocol Converter X  X X X 
Simultaneous Conversions (max) 20 15 6 13
Web Server, FTP, Data Logging X  X - X 
Expansion Ports Up to 8 1 - 1 
Temperature Range -20° to 60°C -10° to 50°C -10° to 50°C 0° to 50°C

Hệ thống sử dụng Màn hình HMI Redlion

Màn hình cảm ứng HMI Redlion - Màn hình HMI G3 Redlion

Màn hình cảm ứng HMI Redlion 

Màn hình HMI | Graphite HMIs

Red Lion’s rugged Graphite® operator panels are the industry's first HMI touchscreens to combine all-aluminum construction with an I/O module architecture. All of the Graphite HMI models offer drag-and-drop protocol conversion, data logging and web-based monitoring and control. With UL Class 1, Division 2, ABS, ATEX and IECEx approvals, Graphite HMIs enable customers to connect, monitor and control processes in harsh environments.

PART # DISPLAY SIZE INDOOR/OUTDOOR DISPLAY SERIAL PORTS ETHERNET PORTS EXPANSION
G07C0000 7" Indoor 800 x 480 3 isol. 1 1 SD + 5 Module Slots
G07S0000 7" Outdoor 800 x 480 3 isol. 1 1 SD + 5 Module Slots
G09C0000 9" Indoor 800 x 480 3 isol. 1 1 SD + 6 Module Slots
G09C1000 9" Indoor 800 x 480 3 isol. 2 1 SD + 6 Module Slots
G10C0000 10" Indoor 640 x 480 3 isol. 1 1 SD + 7 Module Slots
G10C1000 10" Indoor 640 x 480 3 isol. 2 1 SD + 7 Module Slots
G10R0000 10" Indoor 800 x 600 3 isol. 1 1 SD + 7 Module Slots
G10R1000 10" Indoor 800 x 600 3 isol. 2 1 SD + 7 Module Slots
G10S0000 10" Outdoor 640 x 480 3 isol. 1 1 SD + 7 Module Slots
G10S1000 10" Outdoor 640 x 480 3 isol. 2 1 SD + 7 Module Slots
G12C0000 12" Indoor 1280 x 800 3 isol. 1 1 SD + 8 Module Slots
G12C1100 12" Indoor 1280 x 800 4 isol. 2 1 SD + 8 Module Slots
G15C0000 15" Indoor 1024 x 768 3 isol. 1 1 SD + 8 Module Slots
G15C1100 15" Indoor 1024 x 768 4 isol. 2 1 SD + 8 Module Slots

G3 HMIs Red Lion | Màn hình cảm ứng G3 Red Lion

The Red Lion G3 HMI operator panels are far more than ordinary HMIs, offering functionality above and beyond the industry standard. The G3s are field proven with a remarkable track record of durability in harsh environments.

PART # DISPLAY SIZE INDOOR/OUTDOOR DISPLAY SERIAL PORTS ETHERNET PORTS EXPANSION CARD SUPPORT USB HOST
G303M000 3" Indoor 128 x 64 3 1 1 CF Card Slot CF Card No
G303S000 3" Outdoor 128 x 64 3 1 1 CF Card Slot CF Card No
G306A000 6" Indoor 320 x 240 3 1 1 CF Card Slot CF Card Expansion Card
G306M000 6" Indoor 320 x 240 3 1 1 CF Card Slot CF Card No
G306MS00 6" Outdoor 320 x 240 3 1 1 CF Card Slot CF Card No
G308A210 8" Indoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G308A230 8" Indoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G308C100 8" Indoor 640 x 480 3 1 1 CF Card Slot CF Card No
G310C210 10" Indoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G310C230 10" Indoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G310R210 10" Indoor 800 x 600 3 isol. 1 1 CF Card Slot CF Card Yes
G310R230 10" Indoor 800 x 600 3 isol. 2 1 CF Card Slot CF Card Yes
G310S210 10" Outdoor 640 x 480 3 isol. 1 1 CF Card Slot CF Card Yes
G310S230 10" Outdoor 640 x 480 3 isol. 2 1 CF Card Slot CF Card Yes
G315C210 15" Indoor 1024 x 768 4 isol. 1 1 CF Card Slot CF Card Yes
G315C230 15" Indoor 1024 x 768 4 isol. 2 1 CF Card Slot CF Card

CR1000 and CR3000 HMIs Red Lion

In a market of ever-changing customer requirements and increasing rates of innovation, having equipment that can adapt to meet these needs is important. Red Lion’s CR1000 and CR3000 automation HMIs enable integrators and system designers to cost effectively plan for future reconfiguration or feature upgrades without scrapping existing equipment.

CR1000-04000-00210 4.3 480x272 Yes 2 1 0 1 No No
CR1000-07000-00210 7 800x480 Yes 2 1 0 1 No No
CR1000-10000-00210 10.4 800x600 2 1 0 1 No No
CR3000-04000-00310 4.3 480x272 Yes 3 1 1 1 Yes Yes
CR3000-07000-00420 7 800x480 Yes 4 2 2 1 Yes Yes
CR3000-10000-00420 10.4 800x600 4 2 2 1 Yes Yes
CR3000-15000-00420 15 1024x768 4 2 2 1 Yes Yes

Xem Thêm Chi Tiết : TẠI ĐÂY

]]>
Đại lý Redlion Việt Nam - TMP VIETNAM http://thietbicongnghiepnang.com/dai-ly-redlion-viet-nam-tmp-vietnam 2019-03-02 18:51:40 http://thietbicongnghiepnang.com/dai-ly-redlion-viet-nam-tmp-vietnam

Đại lý phân phối Redlion tại Việt Nam

Readmore

Công Ty TNHH TM & DV Tăng Minh Phát hân hạnh là Đại lý cung cấp chính thức Redlion tại Việt Nam.

RED LION có trụ sở chính đặt tại Mỹ, Redlion Vietnam chuyên cung cấp các giải pháp trong công nghiệp như:

- Kết nối các thiết bị đo, thiết bị điều khiển, PLC, cảm biến, đến hệ thống WEB SERVER.

- Chuyển đổi các giao thức dữ liệu như : RS232, RS485, Profibus, Ethernet, OPC UA

- Màn hình HMI, Led

- Hỗ trợ thay thế và lắp ráp thiết bị Redlion

Đại lý phân phối Redlion tại Việt Nam

1. Thiết bị mạng công nghiệp Redlion | Industrial Networking

a. Thiết bị mạng Ethernet RedLion | Ethernet Switch

Red Lion’s rugged N-Tron® and Sixnet® series industrial Ethernet switches are designed to meet diverse networking environments. Built-in redundancy coupled with robust reliability ensures critical infrastructures stay up and running around the clock.

Ethernet Solutions

Bộ chia mạng Redlion | Switch mạng công nghiệp Redlion | Hub chia mạng Redlion | Thiết bị chuyển mạng Redlion | Hub mạng Redlion

Switch mạng 2 port,  Switch mạng 3 port, Switch mạng 4 port, Switch mạng 5 port, Switch mạng 6 port, Switch mạng 8 port, Switch mạng 9 port, Switch mạng 10 port, Switch mạng 11 port, Switch mạng 12 port, Switch mạng 14 port, Switch mạng 16 port, Switch mạng 17 port, Switch mạng 24 port, Switch mạng 26 port

b. Cellular M2M

Cellular Routers

PART # CARRIER NETWORK TECHNOLOGY ETHERNET PORTS POWER INPUT
SN-6900-AM Generic 4G 1 8-30VDC, Molex Connector
SN-6900-AT AT&T 4G 1 8-30VDC, Molex Connector
SN-6900-VZ Verizon 4G 1 8-30VDC, Molex Connector
SN-6901-AM Generic 4G 1 8-30VDC, Screw Connector
SN-6901-AT AT&T 4G 1 8-30VDC, Screw Connector
SN-6901-EU EU/Asia Generic 4G 1 8-30VDC, Screw Connector
SN-6901-VZ Verizon 4G 1 8-30VDC, Screw Connector
SN-6901EB-AM Generic 4G 1 PoE
SN-6901EB-AT AT&T 4G 1 PoE
SN-6901EB-VZ Verizon 4G 1 PoE
SN-6921-AM Generic 4G 5 8-30VDC, Screw Connector
SN-6921-AT AT&T 4G 5 8-30VDC, Screw Connector
SN-6921-EU EU/Asia Generic 4G 5 8-30VDC, Screw Connector
SN-6921-VZ Verizon 4G 5 8-30VDC, Screw Connector
SN-6901-EU-3G EU/Asia Generic 3G 1 8-30VDC, Screw Connector
SN-6921-EU-3G EU/Asia Generic 3G 5 8-30VDC, Screw Connecto

Cellular RTUs

RAM 6000 RTUs

PART # CARRIER NETWORK TECHNOLOGY ETHERNET PORTS POWER INPUT
RAM-6900-AM N.A. Generic 4G 1 8-30VDC, Molex Connector
RAM-6900-AT AT&T 4G 1 8-30VDC, Molex Connector
RAM-6900-EU EU/Asia Generic 4G 1 8-30VDC, Molex Connector
RAM-6900-VZ Verizon 4G 1 8-30VDC, Molex Connector
RAM-6901-AM N.A. Generic 4G 1 8-30VDC, Screw Connector
RAM-6901-AT AT&T 4G 1 8-30VDC, Screw Connector
RAM-6901-EU EU/Asia Generic 4G 1 8-30VDC, Screw Connector
RAM-6901-VZ Verizon 4G 1 8-30VDC, Screw Connector
RAM-6901EB-AM N.A. Generic 4G 1 PoE
RAM-6901EB-AT AT&T 4G 1 PoE
RAM-6901EB-EU EU/Asia Generic 4G 1 PoE
RAM-6901EB-VZ Verizon 4G 1 PoE
RAM-6921-AM N.A. Generic 4G 5 8-30VDC, Screw Connector
RAM-6921-AT AT&T 4G 5 8-30VDC, Screw Connector
RAM-6921-EU EU/Asia Generic 4G 5 8-30VDC, Screw Connector
RAM-6921-VZ Verizon 4G 5 8-30VDC, Screw Connector
RAM-6901-EU-3G EU/Asia Generic 3G 1 8-30VDC, Screw Connector
RAM-6921-EU-3G EU/Asia Generic 3G 5 8-30VDC, Screw Connector

c. Communication Converters

Protocol Converters

Media Converters

2. Thiết bị truyền thông Red Lion | Industrial Automation

a. I/O Modules E3 Redlion

PART  TITLE DI DO AI AO
E3-MIX20884-1 E3 I/O Module-32 Mixed Inputs/Outputs 12 8 8 4
E3-MIX24880-1 E3 I/O Module-32 Mixed Inputs/Outputs 16 8 8 -
E3-MIX24882-1 E3 I/O Module-34 Mixed Inputs/Outputs 16 8 8 2
E3-32DI24-1 E3 I/O Module-32 24V Digital Inputs 32 - - -
E3-16DI24-1 E3 I/O Module-16 24V Digital Inputs 16 - - -
E3-16DIAC-1 E3 I/O Module-16 120VAC Digital Inputs 16 - - -
E3-32DO24-1 E3 I/O Module-32 24V Digital Outputs - 32 - -
E3-16DO24-1 E3 I/O Module-16 24V Digital Outputs - 16 - -
E3-16DORLY-1 E3 I/O Module-16 Digital Output Relays - 16 - -
E3-16ISO20M-1 E3 I/O Module-16 4-20mA Isolated Analog Inputs - - 16 -
E3-32AI20M-1 E3 I/O Module-32 20mA Analog Inputs - - 32 -
E3-32AI10V-1 E3 I/O Module-32 10VDC Analog Inputs - - 32 -
E3-16AI20M-1 E3 I/O Module-16 Analog Inputs (4-20mA) - - 16 -
E3-16AI8AO-1 E3 I/O Module-16 Analog Inputs/8 Analog Outputs - - 16 8
E3-8AO20M-1 E3 I/O Module-8 Analog Outputs - - - 8
E3-16ISOTC-1 E3 I/O Module-16 Isolated Thermocouple Inputs - - 16TC -
E3-10RTD-1 E3 I/O Module-10 RTD Inputs - - 10 RTD -

b. I/O Modules EtherTrak Redlion

PART # TITLE DI DO AI AO
E2-MIX20884-D EtherTRAK-2 I/O Module-32 Mixed Inputs/Outputs 12 8 8 4
E2-MIX24880-D EtherTRAK-2 I/O Module-32 Mixed Inputs/Outputs 24 8 8 -
E2-MIX24882-D EtherTRAK-2 I/O Module-34 Mixed Inputs/Outputs 16 8 8 2
E2-32DI24-D EtherTRAK-2 I/O Module-32 24V Digital Inputs 32 - - -
E2-16DI24-D EtherTRAK-2 I/O Module-16 24V Digital Inputs 16 - - -
E2-16DIAC-D EtherTRAK-2 I/O Module-16 120VAC Digital Inputs 16 - - -
E2-32DO24-D EtherTRAK-2 I/O Module-32 24V Digital Outputs - 32 - -
E2-16DO24-D EtherTRAK-2 I/O Module-16 24V Digital Outputs - 16 - -
E2-16DORLY-D EtherTRAK-2 I/O Module-16 Digital Output Relays - 16 - -
E2-16ISO20M-D EtherTRAK-2 I/O Module-16 4-20mA Isolated Analog Inputs - - 16 -
E2-32AI20M-D EtherTRAK-2 I/O Module-32 20mA Analog Inputs - - 32 -
E2-32AI10V-D EtherTRAK-2 I/O Module-32 10VDC Analog Inputs - - 32 -
E2-16AI20M-D EtherTRAK-2 I/O Module-16 Analog Inputs (4-20mA) - - 16 -
E2-16AI-8AO-D EtherTRAK-2 I/O Module-16 Analog Inputs/8 Analog Outputs - - 16 8
E2-8AO20M-D EtherTRAK-2 I/O Module-8 Analog Outputs - - - 8
E2-16ISOTC-D EtherTRAK-2 I/O Module-16 Isolated Thermocouple Inputs - - 16TC -

c. Bộ điều khiển PID Redlion | PID Controller

Bộ điều khiển nhiệt độ Red Lion

From single to multi-point control, Red Lion has the right PID controller for any application. Red Lion provides a wide range of proportional-integral-derivative (PID) controllers that are rugged, reliable and easy to deploy. Our PID controllers offer industry-leading features and reliable performance designed for the most demanding applications.

Bộ điều khiển PID PXU Redlion | Bộ điều khiển PID PAX2C Redlion | Bộ điều khiển PID DLC Redlion | Modular Controller

Mô tả PXU PXU PAX2C DLC Modular Controller Graphite HMI
Size 1/16 DIN 1/8 DIN 1/4 DIN 1/8 DIN DIN Rail DIN Rail Various Sizes
Display Capability
Universal Signal Input
Single Loop
Dual Loop
Multiple Loop
Panel Mount
DIN Rail Mount
Heater Current Monitor
Remote Setpoint
Ramp/Soak Capability

d. Màn hình cảm ứng HMI Redlion

G07C0000 G10C0000 G15C1100 G308A230
G07S0000 G10C1000 G303M000 G308C100
G09C0000 G10R0000 G303S000 G310C210
G09C1000 G10R1000 G304K200 G310C230
G0FILM07 G10S0000 G306A000 G310R210
G0FILM09 G10S1000 G306M000 G310R230
G0FILM10 G12C0000 G306MS00 G315C230
G0FILM12 G12C1100 G307K200 G310S230
G0FILM15 G15C0000 G308A210 G315C210

e. Panel meters Redlion | Màn hình hiển thi Led Redlion | Large LED Displays

CUB4 Panel meter , CUB5 Panel meter, CUB7 Panel meter, C48 Panel meter, PAX Panel meter,  PAX2 Panel meter, PAX Lite Panel meter, 

CUB4CL10 CUB4L8WM CUB5RTR0 CUB7P010
CUB4CL20 CUB4LP00 CUB5SNK0 CUB7P020
CUB4CL30 CUB4LP40 CUB5TB00 CUB7P100
CUB4CL40 CUB4V000 CUB5TCB0 CUB7P110
CUB4I000 CUB4V010 CUB5TCR0 CUB7P120
CUB4I010 CUB4V020 CUB5TR00 CUB7P200
CUB4I020 CUB5B000 CUB5USB0 CUB7P210
CUB4L000 CUB5COM1 CUB5VB00 CUB7P220
CUB4L010 CUB5COM2 CUB5VR00 CUB7TCG0
CUB4L020 CUB5IB00 CUB7CCG0 CUB7TCG1
CUB4L800 CUB5IR00 CUB7CCR0 CUB7TCR0
CUB4L810 CUB5PB00 CUB7CCS0 CUB7TCR1
CUB7TCS0 CUB7TCS1 CUB7TVG0 CUB7TVR0
CUB4L820 CUB4L8W2 CUB5RLY0 CUB7CVR0
CUB4L8W0 CUB5PR00 CUB5RTB0 CUB7CVS0
CUB4L8W1 CUB5R000 CUB7CVG0 CUB7P000

3. Bộ chuyển đổi tín hiệu Red Lion

a.Bộ chia tín hiệu nguồn PoE Redlion 

Model: 100-POE-SPL-12, 100-POE-SPL-24, 100-POE-SPL-48

b. Bộ chuyển đổi tín hiệu ethernet sang tín hiệu cáp quang

1002MC-LX-10 302MC-SC 102MCE-SC-15 1008TX-POE+
1002MC-LX-40 302MC-ST 102MCE-SC-15-MDR 102MC-SC
1002MC-LX-80 302MC-ST-100-MDR 102MCE-SC-40 102MC-SC-MDR
1002MC-SX 302MC-ST-MT100 102MCE-SC-40-MDR 102MC-ST
1003GX2-B 302MCE-N-SC-15 102MCE-SC-80 302MCE-SC-40
1003GX2-LX-10 302MCE-N-SC-40 102MCE-SC-80-MDR 302MCE-SC-80
1003GX2-LX-40 302MCE-N-SC-80 102MCE-ST-15 302MCE-ST-40
1003GX2-LX-80 302MCE-N-ST-15 102MCE-ST-15-MDR 302MCE-ST-80
1003GX2-SX 302MCE-N-ST-40 102MCE-ST-40 302MC-N-SC
1005TX 302MCE-N-ST-80 102MCE-ST-40-MDR 302MC-N-ST
1008TX 302MCE-SC-15 102MCE-ST-80 102MC-ST-MDR

c. Bộ chuyển tiếp mạng ethernet công nghiệp Redlion

104TX 108TX-HV-MDR 305FX-ST 308FXE2-N-ST-80
104TX-MDR 108TX-MDR 305FXE-N-SC-15 308FXE2-SC-15
105FX-SC 110FX2-SC 305FXE-N-SC-40 308FXE2-SC-40
105FX-SC-MDR 110FX2-ST 305FXE-N-SC-80 308FXE2-SC-80
105FX-ST 110FXE2-SC-15 305FXE-N-ST-15 308FXE2-ST-15
105FX-ST-MDR 110FXE2-SC-40 305FXE-N-ST-40 308FXE2-ST-40
105FXE-SC-80 110FXE2-SC-80 305FXE-N-ST-80 308FXE2-ST-80
105FXE-SC-80-MDR 110FXE2-ST-15 305FXE-SC-15 308TX
105FXE-SC-40 110FXE2-ST-40 305FXE-SC-40 308TX-N
105FXE-SC-40-MDR 110FXE2-ST-80 305FXE-SC-80 309FX-N-SC
105FXE-ST-15 111FX3-SC 305FXE-ST-15 309FX-N-ST
105FXE-ST-15-MDR 111FX3-ST 305FXE-ST-40 309FX-SC
105FXE-ST-40 111FXE3-SC-15 305FXE-ST-80 309FX-ST
105FXE-ST-40-MDR 111FXE3-SC-40 306FX2-N-SC 309FXE-N-SC-15
105FXE-ST-80 111FXE3-SC-80 306FX2-N-ST 309FXE-N-SC-40
105FXE-ST-80-MDR 111FXE3-ST-15 306FX2-SC 309FXE-N-SC-80
105M12 111FXE3-ST-40 306FX2-ST 309FXE-N-ST-15
105TX 111FXE3-ST-80 306FXE2-N-SC-15 309FXE-N-ST-40
105TX-MDR 112FX4-SC 306FXE2-N-SC-40 309FXE-N-ST-80
105TX-SL 112FX4-ST 306FXE2-N-SC-80 309FXE-SC-15
106FX2-SC 112FXE4-SC-15 306FXE2-N-ST-15 309FXE-SC-40
106FX2-SC-MDR 112FXE4-SC-40 306FXE2-N-ST-40 309FXE-SC-80
106FX2-ST 112FXE4-SC-80 306FXE2-N-ST-80 309FXE-ST-15
106FX2-ST-MDR 112FXE4-ST-15 306FXE2-SC-15 309FXE-ST-40
106FXE2-SC-15 112FXE4-ST-40 306FXE2-SC-40 309FXE-ST-80
106FXE2-SC-15-MDR 112FXE4-ST-80 306FXE2-SC-80 316TX
106FXE2-SC-40 114FX6-SC 306FXE2-ST-15 316TX-N
106FXE2-SC-40-MDR 114FX6-ST 306FXE2-ST-40 317FX-N-SC
106FXE2-SC-80 114FXE6-SC-15 306FXE2-ST-80 317FX-N-ST
106FXE2-SC-80-MDR 114FXE6-SC-40 306TX 317FX-SC
106FXE2-ST-15 114FXE6-SC-80 306TX-N 317FX-ST
106FXE2-ST-15-MDR 114FXE6-ST-15 308FX2-N-SC 317FXE-N-SC-15
106FXE2-ST-40 114FXE6-ST-40 308FX2-N-ST 317FXE-N-SC-40
106FXE2-ST-40-MDR 114FXE6-ST-80 308FX2-SC 317FXE-N-SC-80
106FXE2-ST-80 116TX 308FX2-ST 317FXE-N-ST-15
106FXE2-ST-80-MDR 304TX 308FXE2-N-SC-15 317FXE-N-ST-40
108M12 304TX-N 308FXE2-N-SC-40 317FXE-N-ST-80
108M12-HV 305FX-N-SC 308FXE2-N-SC-80 317FXE-SC-15
108TX 305FX-N-ST 308FXE2-N-ST-15 317FXE-SC-40
108TX-HV 305FX-SC 308FXE2-N-ST-40 317FXE-SC-80

4. Bộ chuyển tiếp nguồn PoE công nghiệp Redlion

105FXE-ST-80-POE 105FX-SC-POE 105FXE-SC-40-POE 105TX-POE
105FXE-ST-80-POE-MDR 105FX-SC-POE-MDR 105FXE-SC-40-POE-MDR 105TX-POE-MDR
105FXE-ST-40-POE 105FX-ST-POE 105FXE-ST-15-POE 105FXE-SC-15-POE
105FXE-ST-40-POE-MDR 105FX-ST-POE-MDR 105FXE-ST-15-POE-MDR 105FXE-SC-15-POE-MDR

5. Bộ điều khiển chuyển tiếp mạng ethernet Redlion

508FX2-A-SC 508TX-N 516TX-A 524TX
508FX2-A-ST 509FX-A-SC 516TX-N 524TX-A
508FX2-N-SC 509FX-A-ST 517FX-A-SC 524TX-N
508FX2-N-ST 509FX-N-SC 517FX-A-ST 526FX2-A-SC
508FX2-SC 509FX-N-ST 517FX-N-SC 526FX2-A-ST
508FX2-ST 509FX-SC 517FX-N-ST 526FX2-N-SC
508FXE2-A-SC-15 509FX-ST 517FX-SC 526FX2-N-ST
508FXE2-A-SC-40 509FXE-A-SC-15 517FX-ST 526FX2-SC
508FXE2-A-SC-80 509FXE-A-SC-40 517FXE-A-SC-15 526FX2-ST
508FXE2-A-ST-15 509FXE-A-SC-80 517FXE-A-SC-40 526FXE2-A-SC-15
508FXE2-A-ST-40 509FXE-A-ST-15 517FXE-A-SC-80 526FXE2-A-SC-40
508FXE2-A-ST-80 509FXE-A-ST-40 517FXE-A-ST-15 526FXE2-A-SC-80
508FXE2-N-SC-15 509FXE-A-ST-80 517FXE-A-ST-40 526FXE2-A-ST-15
508FXE2-N-SC-40 509FXE-N-SC-15 517FXE-A-ST-80 526FXE2-A-ST-40
508FXE2-N-SC-80 509FXE-N-SC-40 517FXE-N-SC-15 526FXE2-A-ST-80
508FXE2-N-ST-15 509FXE-N-SC-80 517FXE-N-SC-40 526FXE2-N-SC-15
508FXE2-N-ST-40 509FXE-N-ST-15 517FXE-N-SC-80 526FXE2-N-SC-40
508FXE2-N-ST-80 509FXE-N-ST-40 517FXE-N-ST-15 526FXE2-N-SC-80
508FXE2-SC-15 509FXE-N-ST-80 517FXE-N-ST-40 526FXE2-N-ST-15
508FXE2-SC-40 509FXE-SC-15 517FXE-N-ST-80 526FXE2-N-ST-40
508FXE2-SC-80 509FXE-SC-40 517FXE-SC-15 526FXE2-N-ST-80
508FXE2-ST-15 509FXE-SC-80 517FXE-SC-40 526FXE2-SC-15
508FXE2-ST-40 509FXE-ST-15 517FXE-SC-80 526FXE2-SC-40
508FXE2-ST-80 509FXE-ST-40 517FXE-ST-15 526FXE2-SC-80
508TX 509FXE-ST-80 517FXE-ST-40 526FXE2-ST-15
508TX-A 516TX 517FXE-ST-80 526FXE2-ST-40

6. Công tắc chuyển tiếp mạng Ethernet công nghiệp Redlion

7010TX 7026TX 710FXE2-SC-15-HV 712FXE4-ST-15
7012FX2-SC 7026TX-AC 710FXE2-SC-40 712FXE4-ST-15-HV
7012FX2-SC-HV 7026TX-PMK 710FXE2-SC-40-HV 712FXE4-ST-40
7012FX2-ST 702M12-PK 710FXE2-SC-80 712FXE4-ST-40-HV
7012FX2-ST-HV 702M12-W 710FXE2-SC-80-HV 712FXE4-ST-80
7012FXE2-SC-15 708FX2-SC 710FXE2-ST-15 712FXE4-ST-80-HV
7012FXE2-SC-15-HV 708FX2-ST 710FXE2-ST-15-HV 714FX6-SC
7012FXE2-SC-40 708FXE2-SC-15 710FXE2-ST-40 714FX6-ST
7012FXE2-SC-40-HV 708FXE2-SC-40 710FXE2-ST-40-HV 714FXE6-SC-15
7012FXE2-SC-80 708FXE2-SC-80 710FXE2-ST-80 714FXE6-SC-40
7012FXE2-SC-80-HV 708FXE2-ST-15 710FXE2-ST-80-HV 714FXE6-SC-80
7012FXE2-ST-15 708FXE2-ST-40 711FX3-SC 714FXE6-ST-15
7012FXE2-ST-15-HV 708FXE2-ST-80 711FX3-SC-HV 714FXE6-ST-40
7012FXE2-ST-40 708M12 711FX3-ST 714FXE6-ST-80
7012FXE2-ST-40-HV 708M12-HV 711FX3-ST-HV 716FX2-SC
7012FXE2-ST-80 708TX 711FXE3-SC-15 716FX2-SC-HV
7012FXE2-ST-80-HV 709FX-SC 711FXE3-SC-15-HV 716FX2-ST
7018FX2-SC 709FX-SC-HV 711FXE3-SC-40 716FX2-ST-HV
7018FX2-SC-HV 709FX-ST 711FXE3-SC-40-HV 716FXE2-SC-15
7018FX2-ST 709FX-ST-HV 711FXE3-SC-80 716FXE2-SC-15-HV
7018FX2-ST-HV 709FXE-SC-15 711FXE3-SC-80-HV 716FXE2-SC-40
7018FXE2-SC-15 709FXE-SC-15-HV 711FXE3-ST-15 716FXE2-SC-40-HV
7018FXE2-SC-15-HV 709FXE-SC-40 711FXE3-ST-15-HV 716FXE2-SC-80
7018FXE2-SC-40 709FXE-SC-40-HV 711FXE3-ST-40 716FXE2-SC-80-HV
7018FXE2-SC-40-HV 709FXE-SC-80 711FXE3-ST-40-HV 716FXE2-ST-15
7018FXE2-SC-80 709FXE-SC-80-HV 711FXE3-ST-80 716FXE2-ST-15-HV
7018FXE2-SC-80-HV 709FXE-ST-15 711FXE3-ST-80-HV 716FXE2-ST-40
7018FXE2-ST-15 709FXE-ST-15-HV 712FX4-SC 716FXE2-ST-40-HV
7018FXE2-ST-15-HV 709FXE-ST-40 712FX4-SC-HV 716FXE2-ST-80
7018FXE2-ST-40 709FXE-ST-40-HV 712FX4-ST 716FXE2-ST-80-HV
7018FXE2-ST-40-HV 709FXE-ST-80 712FX4-ST-HV 716M12
7018FXE2-ST-80 709FXE-ST-80-HV 712FXE4-SC-15 716M12-HV
7018FXE2-ST-80-HV 710FX2-SC 712FXE4-SC-15-HV 716TX
7018TX 710FX2-SC-HV 712FXE4-SC-40 716TX-HV
7018TX-HV 710FX2-ST 712FXE4-SC-40-HV 7506GX2
702-W 710FX2-ST-HV 712FXE4-SC-80 7506GX2-LX-10
702-W-PM 710FXE2-SC-15 712FXE4-SC-80-HV 7506GX2-SX

7. Module chuyển tiếp mạng ethernet công nghiệp chuẩn Singlemode Redlion

9002FXE-SC-15 9002FXE-ST-15 9004FXE-SC-15 9004FXE-ST-15
9002FXE-SC-40 9002FXE-ST-40 9004FXE-SC-40 9004FXE-ST-40
9002FXE-SC-80 9002FXE-ST-80 9004FXE-SC-80 9004FXE-ST-80

8. Bộ chuyển đổi tín hiệu mạng ethernet sang tín hiệu quang Redlion

NT24K-11FXE3-SC-80-POE NT24K-10FX2-SC NT24K-12GXE4-SC-10 NT24K-12FXE4-SC-80-POE
NT24K-11FXE3-ST-15 NT24K-10FX2-SC-POE NT24K-12GXE4-SC-10-POE NT24K-12FXE4-ST-15
NT24K-11FXE3-ST-15-POE NT24K-10FX2-ST NT24K-12GXE4-SC-40 NT24K-12FXE4-ST-15-POE
NT24K-11FXE3-ST-40 NT24K-10FX2-ST-POE NT24K-12GXE4-SC-40-POE NT24K-12FXE4-ST-40
NT24K-11FXE3-ST-40-POE NT24K-10FXE2-SC-15 NT24K-12GXE4-SC-80 NT24K-12FXE4-ST-40-POE
NT24K-11FXE3-ST-80 NT24K-10FXE2-SC-15-POE NT24K-12GXE4-SC-80-POE NT24K-12FXE4-ST-80
NT24K-11FXE3-ST-80-POE NT24K-10FXE2-SC-40 NT24K-12SFP-DM4 NT24K-12FXE4-ST-80-POE
NT24K-11GX3-SC NT24K-10FXE2-SC-40-POE NT24K-12SFP-DM4-POE NT24K-12GX4-SC
NT24K-11GX3-SC-POE NT24K-10FXE2-SC-80 NT24K-14FX6-SC NT24K-11FX3-SC
NT24K-11GXE3-SC-10 NT24K-10FXE2-SC-80-POE NT24K-14FX6-SC-POE NT24K-11FX3-SC-POE
NT24K-11GXE3-SC-10-POE NT24K-10FXE2-ST-15 NT24K-14FX6-ST NT24K-11FX3-ST
NT24K-11GXE3-SC-40 NT24K-10FXE2-ST-15-POE NT24K-14FX6-ST-POE NT24K-11FX3-ST-POE
NT24K-11GXE3-SC-40-POE NT24K-10FXE2-ST-40 NT24K-14FXE6-SC-15 NT24K-11FXE3-SC-15
NT24K-11GXE3-SC-80 NT24K-10FXE2-ST-40-POE NT24K-14FXE6-SC-15-POE NT24K-11FXE3-SC-15-POE
NT24K-11GXE3-SC-80-POE NT24K-10FXE2-ST-80 NT24K-14FXE6-SC-40 NT24K-11FXE3-SC-40
NT24K-12FX4-SC NT24K-10FXE2-ST-80-POE NT24K-14FXE6-SC-40-POE NT24K-11FXE3-SC-40-POE
NT24K-12FX4-SC-POE NT24K-10GX2-SC NT24K-14FXE6-SC-80 NT24K-14GX6-SC
NT24K-12FX4-ST NT24K-10GX2-SC-POE NT24K-14FXE6-SC-80-POE NT24K-14GX6-SC-POE
NT24K-12FX4-ST-POE NT24K-10GXE2-SC-10 NT24K-14FXE6-ST-15 NT24K-14GXE6-SC-10
NT24K-12FXE4-SC-15 NT24K-10GXE2-SC-10-POE NT24K-14FXE6-ST-15-POE NT24K-14GXE6-SC-10-POE
NT24K-12FXE4-SC-15-POE NT24K-10GXE2-SC-40 NT24K-14FXE6-ST-40 NT24K-14GXE6-SC-40
NT24K-12FXE4-SC-40 NT24K-10GXE2-SC-40-POE NT24K-14FXE6-ST-40-POE NT24K-14GXE6-SC-40-POE
NT24K-12FXE4-SC-40-POE NT24K-10GXE2-SC-80 NT24K-14FXE6-ST-80 NT24K-14GXE6-SC-80
NT24K-12FXE4-SC-80 NT24K-10GXE2-SC-80-POE NT24K-14FXE6-ST-80-POE NT24K-14GXE6-SC-80-POE

9. Bộ chuyển đổi tín hiệu mạng ethernet sang tín hiệu quang công suất lớn Redlion 

NT24K-AC1 NT24K-DR24-DC NT24K-GX8-SC NT24K-DR16-AC
NT24K-AC1-DC1 NT24K-FX8-SC NT24K-GXE8-SC-10 NT24K-DR16-DC
NT24K-AC2 NT24K-FX8-ST NT24K-GXE8-SC-40 NT24K-DR24-AC
NT24K-DC1 NT24K-FXE8-SC-15 NT24K-GXE8-SC-80 NT24K-FXE8-ST-15
NT24K-DC2 NT24K-FXE8-SC-40 NT24K-NM-PMK NT24K-FXE8-ST-40
NT24K-DR-PMK NT24K-FXE8-SC-80 NT24K-PMK NT24K-FXE8-ST-80

10. Bộ đếm Redlion

C48CB001 C48CD002 C48CP011 C48TD011
C48CB003 C48CD005 C48CP015 C48TD012
C48CB004 C48CD007 C48CP100 C48TD017
C48CB005 C48CD012 C48CP101 C48TD101
C48CB008 C48CD015 C48CP105 C48TD102
C48CB009 C48CD017 C48CP110 C48TD105
C48CB011 C48CD100 C48CP111 C48TD106
C48CB014 C48CD101 C48CP115 C48TD107
C48CB019 C48CD102 C48CS003 C48TD111
C48CB100 C48CD105 C48CS004 C48TD112
C48CB101 C48CD106 C48CS013 C48TD116
C48CB103 C48CD107 C48CS014 C48TD117
C48CB104 C48CD110 C48CS103 C48TS003
C48CB105 C48CD111 C48CS104 C48TS004
C48CB108 C48CD112 C48CS113 C48TS013
C48CB109 C48CD115 C48CS114 C48TS014
C48CB110 C48CD116 C48TD001 C48TS103
C48CB111 C48CD117 C48TD002 C48TS104
C48CB114 C48CP001 C48TD005 C48TS113
C48CB119 C48CP005 C48TD007 C48TS114

11. Module nhận tín hiệu đầu vào Redlion

CSDIO14R CSOUT400 CSPID2T0 CSMSTRSX
CSDIO14S CSPID1R0 CSPID2TM CSMSTRV2
CSINI800 CSPID1RA CSRTD600 CSMSTRZR
CSINI8L0 CSPID1RM CSSG10RA CSPID2R0
CSINV800 CSPID1S0 CSSG10SA CSPID2RM
CSINV8L0 CSPID1SA CSSG11RA CSPID2S0
CSMSTRGT CSPID1SM CSSG11SA CSTC8ISO
CSMSTRLE CSPID1TA CSTC8000 CSTERM00

Xem thêm chi tiết : TẠI ĐÂY

Bạn đang tìm Nơi bán thiết bị của hãng Red Lion chính hãng tại Việt Nam ?

Hãy liên hệ với chúng tôi để được từ vấn và hỗ trợ.

The post Đại lý Redlion Việt Nam - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]>
Công Ty TNHH TM & DV Tăng Minh Phát hân hạnh là Đại lý cung cấp chính thức Redlion tại Việt Nam.

RED LION có trụ sở chính đặt tại Mỹ, Redlion Vietnam chuyên cung cấp các giải pháp trong công nghiệp như:

- Kết nối các thiết bị đo, thiết bị điều khiển, PLC, cảm biến, đến hệ thống WEB SERVER.

- Chuyển đổi các giao thức dữ liệu như : RS232, RS485, Profibus, Ethernet, OPC UA

- Màn hình HMI, Led

- Hỗ trợ thay thế và lắp ráp thiết bị Redlion

Đại lý phân phối Redlion tại Việt Nam

1. Thiết bị mạng công nghiệp Redlion | Industrial Networking

a. Thiết bị mạng Ethernet RedLion | Ethernet Switch

Red Lion’s rugged N-Tron® and Sixnet® series industrial Ethernet switches are designed to meet diverse networking environments. Built-in redundancy coupled with robust reliability ensures critical infrastructures stay up and running around the clock.

Ethernet Solutions

Bộ chia mạng Redlion | Switch mạng công nghiệp Redlion | Hub chia mạng Redlion | Thiết bị chuyển mạng Redlion | Hub mạng Redlion

Switch mạng 2 port,  Switch mạng 3 port, Switch mạng 4 port, Switch mạng 5 port, Switch mạng 6 port, Switch mạng 8 port, Switch mạng 9 port, Switch mạng 10 port, Switch mạng 11 port, Switch mạng 12 port, Switch mạng 14 port, Switch mạng 16 port, Switch mạng 17 port, Switch mạng 24 port, Switch mạng 26 port

b. Cellular M2M

Cellular Routers

PART # CARRIER NETWORK TECHNOLOGY ETHERNET PORTS POWER INPUT
SN-6900-AM Generic 4G 1 8-30VDC, Molex Connector
SN-6900-AT AT&T 4G 1 8-30VDC, Molex Connector
SN-6900-VZ Verizon 4G 1 8-30VDC, Molex Connector
SN-6901-AM Generic 4G 1 8-30VDC, Screw Connector
SN-6901-AT AT&T 4G 1 8-30VDC, Screw Connector
SN-6901-EU EU/Asia Generic 4G 1 8-30VDC, Screw Connector
SN-6901-VZ Verizon 4G 1 8-30VDC, Screw Connector
SN-6901EB-AM Generic 4G 1 PoE
SN-6901EB-AT AT&T 4G 1 PoE
SN-6901EB-VZ Verizon 4G 1 PoE
SN-6921-AM Generic 4G 5 8-30VDC, Screw Connector
SN-6921-AT AT&T 4G 5 8-30VDC, Screw Connector
SN-6921-EU EU/Asia Generic 4G 5 8-30VDC, Screw Connector
SN-6921-VZ Verizon 4G 5 8-30VDC, Screw Connector
SN-6901-EU-3G EU/Asia Generic 3G 1 8-30VDC, Screw Connector
SN-6921-EU-3G EU/Asia Generic 3G 5 8-30VDC, Screw Connecto

Cellular RTUs

RAM 6000 RTUs

PART # CARRIER NETWORK TECHNOLOGY ETHERNET PORTS POWER INPUT
RAM-6900-AM N.A. Generic 4G 1 8-30VDC, Molex Connector
RAM-6900-AT AT&T 4G 1 8-30VDC, Molex Connector
RAM-6900-EU EU/Asia Generic 4G 1 8-30VDC, Molex Connector
RAM-6900-VZ Verizon 4G 1 8-30VDC, Molex Connector
RAM-6901-AM N.A. Generic 4G 1 8-30VDC, Screw Connector
RAM-6901-AT AT&T 4G 1 8-30VDC, Screw Connector
RAM-6901-EU EU/Asia Generic 4G 1 8-30VDC, Screw Connector
RAM-6901-VZ Verizon 4G 1 8-30VDC, Screw Connector
RAM-6901EB-AM N.A. Generic 4G 1 PoE
RAM-6901EB-AT AT&T 4G 1 PoE
RAM-6901EB-EU EU/Asia Generic 4G 1 PoE
RAM-6901EB-VZ Verizon 4G 1 PoE
RAM-6921-AM N.A. Generic 4G 5 8-30VDC, Screw Connector
RAM-6921-AT AT&T 4G 5 8-30VDC, Screw Connector
RAM-6921-EU EU/Asia Generic 4G 5 8-30VDC, Screw Connector
RAM-6921-VZ Verizon 4G 5 8-30VDC, Screw Connector
RAM-6901-EU-3G EU/Asia Generic 3G 1 8-30VDC, Screw Connector
RAM-6921-EU-3G EU/Asia Generic 3G 5 8-30VDC, Screw Connector

c. Communication Converters

Protocol Converters

Media Converters

2. Thiết bị truyền thông Red Lion | Industrial Automation

a. I/O Modules E3 Redlion

PART  TITLE DI DO AI AO
E3-MIX20884-1 E3 I/O Module-32 Mixed Inputs/Outputs 12 8 8 4
E3-MIX24880-1 E3 I/O Module-32 Mixed Inputs/Outputs 16 8 8 -
E3-MIX24882-1 E3 I/O Module-34 Mixed Inputs/Outputs 16 8 8 2
E3-32DI24-1 E3 I/O Module-32 24V Digital Inputs 32 - - -
E3-16DI24-1 E3 I/O Module-16 24V Digital Inputs 16 - - -
E3-16DIAC-1 E3 I/O Module-16 120VAC Digital Inputs 16 - - -
E3-32DO24-1 E3 I/O Module-32 24V Digital Outputs - 32 - -
E3-16DO24-1 E3 I/O Module-16 24V Digital Outputs - 16 - -
E3-16DORLY-1 E3 I/O Module-16 Digital Output Relays - 16 - -
E3-16ISO20M-1 E3 I/O Module-16 4-20mA Isolated Analog Inputs - - 16 -
E3-32AI20M-1 E3 I/O Module-32 20mA Analog Inputs - - 32 -
E3-32AI10V-1 E3 I/O Module-32 10VDC Analog Inputs - - 32 -
E3-16AI20M-1 E3 I/O Module-16 Analog Inputs (4-20mA) - - 16 -
E3-16AI8AO-1 E3 I/O Module-16 Analog Inputs/8 Analog Outputs - - 16 8
E3-8AO20M-1 E3 I/O Module-8 Analog Outputs - - - 8
E3-16ISOTC-1 E3 I/O Module-16 Isolated Thermocouple Inputs - - 16TC -
E3-10RTD-1 E3 I/O Module-10 RTD Inputs - - 10 RTD -

b. I/O Modules EtherTrak Redlion

PART # TITLE DI DO AI AO
E2-MIX20884-D EtherTRAK-2 I/O Module-32 Mixed Inputs/Outputs 12 8 8 4
E2-MIX24880-D EtherTRAK-2 I/O Module-32 Mixed Inputs/Outputs 24 8 8 -
E2-MIX24882-D EtherTRAK-2 I/O Module-34 Mixed Inputs/Outputs 16 8 8 2
E2-32DI24-D EtherTRAK-2 I/O Module-32 24V Digital Inputs 32 - - -
E2-16DI24-D EtherTRAK-2 I/O Module-16 24V Digital Inputs 16 - - -
E2-16DIAC-D EtherTRAK-2 I/O Module-16 120VAC Digital Inputs 16 - - -
E2-32DO24-D EtherTRAK-2 I/O Module-32 24V Digital Outputs - 32 - -
E2-16DO24-D EtherTRAK-2 I/O Module-16 24V Digital Outputs - 16 - -
E2-16DORLY-D EtherTRAK-2 I/O Module-16 Digital Output Relays - 16 - -
E2-16ISO20M-D EtherTRAK-2 I/O Module-16 4-20mA Isolated Analog Inputs - - 16 -
E2-32AI20M-D EtherTRAK-2 I/O Module-32 20mA Analog Inputs - - 32 -
E2-32AI10V-D EtherTRAK-2 I/O Module-32 10VDC Analog Inputs - - 32 -
E2-16AI20M-D EtherTRAK-2 I/O Module-16 Analog Inputs (4-20mA) - - 16 -
E2-16AI-8AO-D EtherTRAK-2 I/O Module-16 Analog Inputs/8 Analog Outputs - - 16 8
E2-8AO20M-D EtherTRAK-2 I/O Module-8 Analog Outputs - - - 8
E2-16ISOTC-D EtherTRAK-2 I/O Module-16 Isolated Thermocouple Inputs - - 16TC -

c. Bộ điều khiển PID Redlion | PID Controller

Bộ điều khiển nhiệt độ Red Lion

From single to multi-point control, Red Lion has the right PID controller for any application. Red Lion provides a wide range of proportional-integral-derivative (PID) controllers that are rugged, reliable and easy to deploy. Our PID controllers offer industry-leading features and reliable performance designed for the most demanding applications.

Bộ điều khiển PID PXU Redlion | Bộ điều khiển PID PAX2C Redlion | Bộ điều khiển PID DLC Redlion | Modular Controller

Mô tả PXU PXU PAX2C DLC Modular Controller Graphite HMI
Size 1/16 DIN 1/8 DIN 1/4 DIN 1/8 DIN DIN Rail DIN Rail Various Sizes
Display Capability
Universal Signal Input
Single Loop
Dual Loop
Multiple Loop
Panel Mount
DIN Rail Mount
Heater Current Monitor
Remote Setpoint
Ramp/Soak Capability

d. Màn hình cảm ứng HMI Redlion

G07C0000 G10C0000 G15C1100 G308A230
G07S0000 G10C1000 G303M000 G308C100
G09C0000 G10R0000 G303S000 G310C210
G09C1000 G10R1000 G304K200 G310C230
G0FILM07 G10S0000 G306A000 G310R210
G0FILM09 G10S1000 G306M000 G310R230
G0FILM10 G12C0000 G306MS00 G315C230
G0FILM12 G12C1100 G307K200 G310S230
G0FILM15 G15C0000 G308A210 G315C210

e. Panel meters Redlion | Màn hình hiển thi Led Redlion | Large LED Displays

CUB4 Panel meter , CUB5 Panel meter, CUB7 Panel meter, C48 Panel meter, PAX Panel meter,  PAX2 Panel meter, PAX Lite Panel meter, 

CUB4CL10 CUB4L8WM CUB5RTR0 CUB7P010
CUB4CL20 CUB4LP00 CUB5SNK0 CUB7P020
CUB4CL30 CUB4LP40 CUB5TB00 CUB7P100
CUB4CL40 CUB4V000 CUB5TCB0 CUB7P110
CUB4I000 CUB4V010 CUB5TCR0 CUB7P120
CUB4I010 CUB4V020 CUB5TR00 CUB7P200
CUB4I020 CUB5B000 CUB5USB0 CUB7P210
CUB4L000 CUB5COM1 CUB5VB00 CUB7P220
CUB4L010 CUB5COM2 CUB5VR00 CUB7TCG0
CUB4L020 CUB5IB00 CUB7CCG0 CUB7TCG1
CUB4L800 CUB5IR00 CUB7CCR0 CUB7TCR0
CUB4L810 CUB5PB00 CUB7CCS0 CUB7TCR1
CUB7TCS0 CUB7TCS1 CUB7TVG0 CUB7TVR0
CUB4L820 CUB4L8W2 CUB5RLY0 CUB7CVR0
CUB4L8W0 CUB5PR00 CUB5RTB0 CUB7CVS0
CUB4L8W1 CUB5R000 CUB7CVG0 CUB7P000

3. Bộ chuyển đổi tín hiệu Red Lion

a.Bộ chia tín hiệu nguồn PoE Redlion 

Model: 100-POE-SPL-12, 100-POE-SPL-24, 100-POE-SPL-48

b. Bộ chuyển đổi tín hiệu ethernet sang tín hiệu cáp quang

1002MC-LX-10 302MC-SC 102MCE-SC-15 1008TX-POE+
1002MC-LX-40 302MC-ST 102MCE-SC-15-MDR 102MC-SC
1002MC-LX-80 302MC-ST-100-MDR 102MCE-SC-40 102MC-SC-MDR
1002MC-SX 302MC-ST-MT100 102MCE-SC-40-MDR 102MC-ST
1003GX2-B 302MCE-N-SC-15 102MCE-SC-80 302MCE-SC-40
1003GX2-LX-10 302MCE-N-SC-40 102MCE-SC-80-MDR 302MCE-SC-80
1003GX2-LX-40 302MCE-N-SC-80 102MCE-ST-15 302MCE-ST-40
1003GX2-LX-80 302MCE-N-ST-15 102MCE-ST-15-MDR 302MCE-ST-80
1003GX2-SX 302MCE-N-ST-40 102MCE-ST-40 302MC-N-SC
1005TX 302MCE-N-ST-80 102MCE-ST-40-MDR 302MC-N-ST
1008TX 302MCE-SC-15 102MCE-ST-80 102MC-ST-MDR

c. Bộ chuyển tiếp mạng ethernet công nghiệp Redlion

104TX 108TX-HV-MDR 305FX-ST 308FXE2-N-ST-80
104TX-MDR 108TX-MDR 305FXE-N-SC-15 308FXE2-SC-15
105FX-SC 110FX2-SC 305FXE-N-SC-40 308FXE2-SC-40
105FX-SC-MDR 110FX2-ST 305FXE-N-SC-80 308FXE2-SC-80
105FX-ST 110FXE2-SC-15 305FXE-N-ST-15 308FXE2-ST-15
105FX-ST-MDR 110FXE2-SC-40 305FXE-N-ST-40 308FXE2-ST-40
105FXE-SC-80 110FXE2-SC-80 305FXE-N-ST-80 308FXE2-ST-80
105FXE-SC-80-MDR 110FXE2-ST-15 305FXE-SC-15 308TX
105FXE-SC-40 110FXE2-ST-40 305FXE-SC-40 308TX-N
105FXE-SC-40-MDR 110FXE2-ST-80 305FXE-SC-80 309FX-N-SC
105FXE-ST-15 111FX3-SC 305FXE-ST-15 309FX-N-ST
105FXE-ST-15-MDR 111FX3-ST 305FXE-ST-40 309FX-SC
105FXE-ST-40 111FXE3-SC-15 305FXE-ST-80 309FX-ST
105FXE-ST-40-MDR 111FXE3-SC-40 306FX2-N-SC 309FXE-N-SC-15
105FXE-ST-80 111FXE3-SC-80 306FX2-N-ST 309FXE-N-SC-40
105FXE-ST-80-MDR 111FXE3-ST-15 306FX2-SC 309FXE-N-SC-80
105M12 111FXE3-ST-40 306FX2-ST 309FXE-N-ST-15
105TX 111FXE3-ST-80 306FXE2-N-SC-15 309FXE-N-ST-40
105TX-MDR 112FX4-SC 306FXE2-N-SC-40 309FXE-N-ST-80
105TX-SL 112FX4-ST 306FXE2-N-SC-80 309FXE-SC-15
106FX2-SC 112FXE4-SC-15 306FXE2-N-ST-15 309FXE-SC-40
106FX2-SC-MDR 112FXE4-SC-40 306FXE2-N-ST-40 309FXE-SC-80
106FX2-ST 112FXE4-SC-80 306FXE2-N-ST-80 309FXE-ST-15
106FX2-ST-MDR 112FXE4-ST-15 306FXE2-SC-15 309FXE-ST-40
106FXE2-SC-15 112FXE4-ST-40 306FXE2-SC-40 309FXE-ST-80
106FXE2-SC-15-MDR 112FXE4-ST-80 306FXE2-SC-80 316TX
106FXE2-SC-40 114FX6-SC 306FXE2-ST-15 316TX-N
106FXE2-SC-40-MDR 114FX6-ST 306FXE2-ST-40 317FX-N-SC
106FXE2-SC-80 114FXE6-SC-15 306FXE2-ST-80 317FX-N-ST
106FXE2-SC-80-MDR 114FXE6-SC-40 306TX 317FX-SC
106FXE2-ST-15 114FXE6-SC-80 306TX-N 317FX-ST
106FXE2-ST-15-MDR 114FXE6-ST-15 308FX2-N-SC 317FXE-N-SC-15
106FXE2-ST-40 114FXE6-ST-40 308FX2-N-ST 317FXE-N-SC-40
106FXE2-ST-40-MDR 114FXE6-ST-80 308FX2-SC 317FXE-N-SC-80
106FXE2-ST-80 116TX 308FX2-ST 317FXE-N-ST-15
106FXE2-ST-80-MDR 304TX 308FXE2-N-SC-15 317FXE-N-ST-40
108M12 304TX-N 308FXE2-N-SC-40 317FXE-N-ST-80
108M12-HV 305FX-N-SC 308FXE2-N-SC-80 317FXE-SC-15
108TX 305FX-N-ST 308FXE2-N-ST-15 317FXE-SC-40
108TX-HV 305FX-SC 308FXE2-N-ST-40 317FXE-SC-80

4. Bộ chuyển tiếp nguồn PoE công nghiệp Redlion

105FXE-ST-80-POE 105FX-SC-POE 105FXE-SC-40-POE 105TX-POE
105FXE-ST-80-POE-MDR 105FX-SC-POE-MDR 105FXE-SC-40-POE-MDR 105TX-POE-MDR
105FXE-ST-40-POE 105FX-ST-POE 105FXE-ST-15-POE 105FXE-SC-15-POE
105FXE-ST-40-POE-MDR 105FX-ST-POE-MDR 105FXE-ST-15-POE-MDR 105FXE-SC-15-POE-MDR

5. Bộ điều khiển chuyển tiếp mạng ethernet Redlion

508FX2-A-SC 508TX-N 516TX-A 524TX
508FX2-A-ST 509FX-A-SC 516TX-N 524TX-A
508FX2-N-SC 509FX-A-ST 517FX-A-SC 524TX-N
508FX2-N-ST 509FX-N-SC 517FX-A-ST 526FX2-A-SC
508FX2-SC 509FX-N-ST 517FX-N-SC 526FX2-A-ST
508FX2-ST 509FX-SC 517FX-N-ST 526FX2-N-SC
508FXE2-A-SC-15 509FX-ST 517FX-SC 526FX2-N-ST
508FXE2-A-SC-40 509FXE-A-SC-15 517FX-ST 526FX2-SC
508FXE2-A-SC-80 509FXE-A-SC-40 517FXE-A-SC-15 526FX2-ST
508FXE2-A-ST-15 509FXE-A-SC-80 517FXE-A-SC-40 526FXE2-A-SC-15
508FXE2-A-ST-40 509FXE-A-ST-15 517FXE-A-SC-80 526FXE2-A-SC-40
508FXE2-A-ST-80 509FXE-A-ST-40 517FXE-A-ST-15 526FXE2-A-SC-80
508FXE2-N-SC-15 509FXE-A-ST-80 517FXE-A-ST-40 526FXE2-A-ST-15
508FXE2-N-SC-40 509FXE-N-SC-15 517FXE-A-ST-80 526FXE2-A-ST-40
508FXE2-N-SC-80 509FXE-N-SC-40 517FXE-N-SC-15 526FXE2-A-ST-80
508FXE2-N-ST-15 509FXE-N-SC-80 517FXE-N-SC-40 526FXE2-N-SC-15
508FXE2-N-ST-40 509FXE-N-ST-15 517FXE-N-SC-80 526FXE2-N-SC-40
508FXE2-N-ST-80 509FXE-N-ST-40 517FXE-N-ST-15 526FXE2-N-SC-80
508FXE2-SC-15 509FXE-N-ST-80 517FXE-N-ST-40 526FXE2-N-ST-15
508FXE2-SC-40 509FXE-SC-15 517FXE-N-ST-80 526FXE2-N-ST-40
508FXE2-SC-80 509FXE-SC-40 517FXE-SC-15 526FXE2-N-ST-80
508FXE2-ST-15 509FXE-SC-80 517FXE-SC-40 526FXE2-SC-15
508FXE2-ST-40 509FXE-ST-15 517FXE-SC-80 526FXE2-SC-40
508FXE2-ST-80 509FXE-ST-40 517FXE-ST-15 526FXE2-SC-80
508TX 509FXE-ST-80 517FXE-ST-40 526FXE2-ST-15
508TX-A 516TX 517FXE-ST-80 526FXE2-ST-40

6. Công tắc chuyển tiếp mạng Ethernet công nghiệp Redlion

7010TX 7026TX 710FXE2-SC-15-HV 712FXE4-ST-15
7012FX2-SC 7026TX-AC 710FXE2-SC-40 712FXE4-ST-15-HV
7012FX2-SC-HV 7026TX-PMK 710FXE2-SC-40-HV 712FXE4-ST-40
7012FX2-ST 702M12-PK 710FXE2-SC-80 712FXE4-ST-40-HV
7012FX2-ST-HV 702M12-W 710FXE2-SC-80-HV 712FXE4-ST-80
7012FXE2-SC-15 708FX2-SC 710FXE2-ST-15 712FXE4-ST-80-HV
7012FXE2-SC-15-HV 708FX2-ST 710FXE2-ST-15-HV 714FX6-SC
7012FXE2-SC-40 708FXE2-SC-15 710FXE2-ST-40 714FX6-ST
7012FXE2-SC-40-HV 708FXE2-SC-40 710FXE2-ST-40-HV 714FXE6-SC-15
7012FXE2-SC-80 708FXE2-SC-80 710FXE2-ST-80 714FXE6-SC-40
7012FXE2-SC-80-HV 708FXE2-ST-15 710FXE2-ST-80-HV 714FXE6-SC-80
7012FXE2-ST-15 708FXE2-ST-40 711FX3-SC 714FXE6-ST-15
7012FXE2-ST-15-HV 708FXE2-ST-80 711FX3-SC-HV 714FXE6-ST-40
7012FXE2-ST-40 708M12 711FX3-ST 714FXE6-ST-80
7012FXE2-ST-40-HV 708M12-HV 711FX3-ST-HV 716FX2-SC
7012FXE2-ST-80 708TX 711FXE3-SC-15 716FX2-SC-HV
7012FXE2-ST-80-HV 709FX-SC 711FXE3-SC-15-HV 716FX2-ST
7018FX2-SC 709FX-SC-HV 711FXE3-SC-40 716FX2-ST-HV
7018FX2-SC-HV 709FX-ST 711FXE3-SC-40-HV 716FXE2-SC-15
7018FX2-ST 709FX-ST-HV 711FXE3-SC-80 716FXE2-SC-15-HV
7018FX2-ST-HV 709FXE-SC-15 711FXE3-SC-80-HV 716FXE2-SC-40
7018FXE2-SC-15 709FXE-SC-15-HV 711FXE3-ST-15 716FXE2-SC-40-HV
7018FXE2-SC-15-HV 709FXE-SC-40 711FXE3-ST-15-HV 716FXE2-SC-80
7018FXE2-SC-40 709FXE-SC-40-HV 711FXE3-ST-40 716FXE2-SC-80-HV
7018FXE2-SC-40-HV 709FXE-SC-80 711FXE3-ST-40-HV 716FXE2-ST-15
7018FXE2-SC-80 709FXE-SC-80-HV 711FXE3-ST-80 716FXE2-ST-15-HV
7018FXE2-SC-80-HV 709FXE-ST-15 711FXE3-ST-80-HV 716FXE2-ST-40
7018FXE2-ST-15 709FXE-ST-15-HV 712FX4-SC 716FXE2-ST-40-HV
7018FXE2-ST-15-HV 709FXE-ST-40 712FX4-SC-HV 716FXE2-ST-80
7018FXE2-ST-40 709FXE-ST-40-HV 712FX4-ST 716FXE2-ST-80-HV
7018FXE2-ST-40-HV 709FXE-ST-80 712FX4-ST-HV 716M12
7018FXE2-ST-80 709FXE-ST-80-HV 712FXE4-SC-15 716M12-HV
7018FXE2-ST-80-HV 710FX2-SC 712FXE4-SC-15-HV 716TX
7018TX 710FX2-SC-HV 712FXE4-SC-40 716TX-HV
7018TX-HV 710FX2-ST 712FXE4-SC-40-HV 7506GX2
702-W 710FX2-ST-HV 712FXE4-SC-80 7506GX2-LX-10
702-W-PM 710FXE2-SC-15 712FXE4-SC-80-HV 7506GX2-SX

7. Module chuyển tiếp mạng ethernet công nghiệp chuẩn Singlemode Redlion

9002FXE-SC-15 9002FXE-ST-15 9004FXE-SC-15 9004FXE-ST-15
9002FXE-SC-40 9002FXE-ST-40 9004FXE-SC-40 9004FXE-ST-40
9002FXE-SC-80 9002FXE-ST-80 9004FXE-SC-80 9004FXE-ST-80

8. Bộ chuyển đổi tín hiệu mạng ethernet sang tín hiệu quang Redlion

NT24K-11FXE3-SC-80-POE NT24K-10FX2-SC NT24K-12GXE4-SC-10 NT24K-12FXE4-SC-80-POE
NT24K-11FXE3-ST-15 NT24K-10FX2-SC-POE NT24K-12GXE4-SC-10-POE NT24K-12FXE4-ST-15
NT24K-11FXE3-ST-15-POE NT24K-10FX2-ST NT24K-12GXE4-SC-40 NT24K-12FXE4-ST-15-POE
NT24K-11FXE3-ST-40 NT24K-10FX2-ST-POE NT24K-12GXE4-SC-40-POE NT24K-12FXE4-ST-40
NT24K-11FXE3-ST-40-POE NT24K-10FXE2-SC-15 NT24K-12GXE4-SC-80 NT24K-12FXE4-ST-40-POE
NT24K-11FXE3-ST-80 NT24K-10FXE2-SC-15-POE NT24K-12GXE4-SC-80-POE NT24K-12FXE4-ST-80
NT24K-11FXE3-ST-80-POE NT24K-10FXE2-SC-40 NT24K-12SFP-DM4 NT24K-12FXE4-ST-80-POE
NT24K-11GX3-SC NT24K-10FXE2-SC-40-POE NT24K-12SFP-DM4-POE NT24K-12GX4-SC
NT24K-11GX3-SC-POE NT24K-10FXE2-SC-80 NT24K-14FX6-SC NT24K-11FX3-SC
NT24K-11GXE3-SC-10 NT24K-10FXE2-SC-80-POE NT24K-14FX6-SC-POE NT24K-11FX3-SC-POE
NT24K-11GXE3-SC-10-POE NT24K-10FXE2-ST-15 NT24K-14FX6-ST NT24K-11FX3-ST
NT24K-11GXE3-SC-40 NT24K-10FXE2-ST-15-POE NT24K-14FX6-ST-POE NT24K-11FX3-ST-POE
NT24K-11GXE3-SC-40-POE NT24K-10FXE2-ST-40 NT24K-14FXE6-SC-15 NT24K-11FXE3-SC-15
NT24K-11GXE3-SC-80 NT24K-10FXE2-ST-40-POE NT24K-14FXE6-SC-15-POE NT24K-11FXE3-SC-15-POE
NT24K-11GXE3-SC-80-POE NT24K-10FXE2-ST-80 NT24K-14FXE6-SC-40 NT24K-11FXE3-SC-40
NT24K-12FX4-SC NT24K-10FXE2-ST-80-POE NT24K-14FXE6-SC-40-POE NT24K-11FXE3-SC-40-POE
NT24K-12FX4-SC-POE NT24K-10GX2-SC NT24K-14FXE6-SC-80 NT24K-14GX6-SC
NT24K-12FX4-ST NT24K-10GX2-SC-POE NT24K-14FXE6-SC-80-POE NT24K-14GX6-SC-POE
NT24K-12FX4-ST-POE NT24K-10GXE2-SC-10 NT24K-14FXE6-ST-15 NT24K-14GXE6-SC-10
NT24K-12FXE4-SC-15 NT24K-10GXE2-SC-10-POE NT24K-14FXE6-ST-15-POE NT24K-14GXE6-SC-10-POE
NT24K-12FXE4-SC-15-POE NT24K-10GXE2-SC-40 NT24K-14FXE6-ST-40 NT24K-14GXE6-SC-40
NT24K-12FXE4-SC-40 NT24K-10GXE2-SC-40-POE NT24K-14FXE6-ST-40-POE NT24K-14GXE6-SC-40-POE
NT24K-12FXE4-SC-40-POE NT24K-10GXE2-SC-80 NT24K-14FXE6-ST-80 NT24K-14GXE6-SC-80
NT24K-12FXE4-SC-80 NT24K-10GXE2-SC-80-POE NT24K-14FXE6-ST-80-POE NT24K-14GXE6-SC-80-POE

9. Bộ chuyển đổi tín hiệu mạng ethernet sang tín hiệu quang công suất lớn Redlion 

NT24K-AC1 NT24K-DR24-DC NT24K-GX8-SC NT24K-DR16-AC
NT24K-AC1-DC1 NT24K-FX8-SC NT24K-GXE8-SC-10 NT24K-DR16-DC
NT24K-AC2 NT24K-FX8-ST NT24K-GXE8-SC-40 NT24K-DR24-AC
NT24K-DC1 NT24K-FXE8-SC-15 NT24K-GXE8-SC-80 NT24K-FXE8-ST-15
NT24K-DC2 NT24K-FXE8-SC-40 NT24K-NM-PMK NT24K-FXE8-ST-40
NT24K-DR-PMK NT24K-FXE8-SC-80 NT24K-PMK NT24K-FXE8-ST-80

10. Bộ đếm Redlion

C48CB001 C48CD002 C48CP011 C48TD011
C48CB003 C48CD005 C48CP015 C48TD012
C48CB004 C48CD007 C48CP100 C48TD017
C48CB005 C48CD012 C48CP101 C48TD101
C48CB008 C48CD015 C48CP105 C48TD102
C48CB009 C48CD017 C48CP110 C48TD105
C48CB011 C48CD100 C48CP111 C48TD106
C48CB014 C48CD101 C48CP115 C48TD107
C48CB019 C48CD102 C48CS003 C48TD111
C48CB100 C48CD105 C48CS004 C48TD112
C48CB101 C48CD106 C48CS013 C48TD116
C48CB103 C48CD107 C48CS014 C48TD117
C48CB104 C48CD110 C48CS103 C48TS003
C48CB105 C48CD111 C48CS104 C48TS004
C48CB108 C48CD112 C48CS113 C48TS013
C48CB109 C48CD115 C48CS114 C48TS014
C48CB110 C48CD116 C48TD001 C48TS103
C48CB111 C48CD117 C48TD002 C48TS104
C48CB114 C48CP001 C48TD005 C48TS113
C48CB119 C48CP005 C48TD007 C48TS114

11. Module nhận tín hiệu đầu vào Redlion

CSDIO14R CSOUT400 CSPID2T0 CSMSTRSX
CSDIO14S CSPID1R0 CSPID2TM CSMSTRV2
CSINI800 CSPID1RA CSRTD600 CSMSTRZR
CSINI8L0 CSPID1RM CSSG10RA CSPID2R0
CSINV800 CSPID1S0 CSSG10SA CSPID2RM
CSINV8L0 CSPID1SA CSSG11RA CSPID2S0
CSMSTRGT CSPID1SM CSSG11SA CSTC8ISO
CSMSTRLE CSPID1TA CSTC8000 CSTERM00

Xem thêm chi tiết : TẠI ĐÂY

Bạn đang tìm Nơi bán thiết bị của hãng Red Lion chính hãng tại Việt Nam ?

Hãy liên hệ với chúng tôi để được từ vấn và hỗ trợ.

]]>
Type 2000 Burkert - Van góc Burkert Type 2000 - Burkert Vietnam http://thietbicongnghiepnang.com/type-2000-burkert-van-goc-burkert-type-2000-burkert-vietnam 2019-02-28 15:02:02 http://thietbicongnghiepnang.com/type-2000-burkert-van-goc-burkert-type-2000-burkert-vietnam

Nhà phân phối Van Burkert chính hãng tại Việt Nam

Type 2000 Burkert - Van góc Burkert Type 2000 - Burkert Vietnam

Readmore

Tăng Minh Phát - Đại lý lý phân Burkert Việt Nam

Type 2000 Burkert Vietnam - Van góc Type 2000 Burkert

Type 2000

Pneumatically operated 2/2 way angle seat valve CLASSIC

  • Stainless steel or gunmetal housing with sleeve, clamped or welded connection
  • Long service life
  • High flow rate
  • Robust actuators with modular accessory program

Order Ident No.

Ident No. 1134

Ident No. 2047

Ident No. 186588

Ident No. 263513

Ident No. 1140

Ident No. 2072

Ident No. 186721

Ident No. 264880

Ident No. 1251

Ident No. 2149

Ident No. 186725

Ident No. 266338

Ident No. 1392

Ident No. 2151

Ident No. 186785

Ident No. 267168

Ident No. 1393

Ident No. 2158

Ident No. 186787

Ident No. 269760

Ident No. 1394

Ident No. 2159

Ident No. 186919

Ident No. 270158

Ident No. 1397

Ident No. 2160

Ident No. 186967

Ident No. 271077

Ident No. 1401

Ident No. 2164

Ident No. 186969

Ident No. 272623

Ident No. 1447

Ident No. 2170

Ident No. 186970

Ident No. 274613

Ident No. 1449

Ident No. 2171

Ident No. 186971

Ident No. 274620

Ident No. 1593

Ident No. 2172

Ident No. 187004

Ident No. 274662

Ident No. 2150

Ident No. 2180

Ident No. 187338

Ident No. 276905

Ident No. 142613

Ident No. 2181

Ident No. 187584

Ident No. 277104

Ident No. 143443

Ident No. 2186

Ident No. 187630

Ident No. 277502

Ident No. 143444

Ident No. 2325

Ident No. 187635

Ident No. 279635

Ident No. 143445

Ident No. 2380

Ident No. 187637

Ident No. 282541

Ident No. 143448

Ident No. 2381

Ident No. 187638

Ident No. 282739

Ident No. 154678

Ident No. 2382

Ident No. 187670

Ident No. 283236

Ident No. 169344

Ident No. 2383

Ident No. 187681

Ident No. 286081

Ident No. 178614

Ident No. 2384

Ident No. 187683

Ident No. 289110

Ident No. 210644

Ident No. 2385

Ident No. 187684

Ident No. 289111

Ident No. 212149

Ident No. 2386

Ident No. 187832

Ident No. 289112

Ident No. 246068

Ident No. 2393

Ident No. 187833

Ident No. 289113

Ident No. 246071

Ident No. 2433

Ident No. 187852

Ident No. 289137

Ident No. 342352

Ident No. 2435

Ident No. 187857

Ident No. 289637

Ident No. 344381

Ident No. 3063

Ident No. 187864

Ident No. 289642

Ident No. 344382

Ident No. 130505

Ident No. 187866

Ident No. 289644

Ident No. 344383

Ident No. 130687

Ident No. 187929

Ident No. 289679

Ident No. 344384

Ident No. 130689

Ident No. 187957

Ident No. 290011

Ident No. 344385

Ident No. 131830

Ident No. 189318

Ident No. 290659

Ident No. 344386

Ident No. 131898

Ident No. 189319

Ident No. 293200

Ident No. 344387

Ident No. 131899

Ident No. 189367

Ident No. 293452

Ident No. 344388

Ident No. 137260

Ident No. 189403

Ident No. 293622

Ident No. 344389

Ident No. 137261

Ident No. 189944

Ident No. 297465

Ident No. 344390

Ident No. 137362

Ident No. 189945

Ident No. 326350

Ident No. 344395

Ident No. 137552

Ident No. 202929

Ident No. 331340

Ident No. 344396

Ident No. 140963

Ident No. 204259

Ident No. 336548

Ident No. 344397

Ident No. 141950

Ident No. 204361

Ident No. 337466

Ident No. 344398

Ident No. 142253

Ident No. 206117

Ident No. 337569

Ident No. 344400

Ident No. 142615

Ident No. 206270

Ident No. 338952

Ident No. 344401

Ident No. 143450

Ident No. 206485

Ident No. 339560

Ident No. 344402

Ident No. 143452

Ident No. 208289

Ident No. 340137

Ident No. 344405

Ident No. 143453

Ident No. 209045

Ident No. 340589

Ident No. 344406

Ident No. 143454

Ident No. 209346

Ident No. 340590

Ident No. 344407

Ident No. 143455

Ident No. 209596

Ident No. 340591

Ident No. 344408

Ident No. 143456

Ident No. 211252

Ident No. 340787

Ident No. 344411

Ident No. 143457

Ident No. 212911

Ident No. 344393

Ident No. 344412

Ident No. 143458

Ident No. 213439

Ident No. 344399

Ident No. 344413

Ident No. 143459

Ident No. 215321

Ident No. 344409

Ident No. 344432

Ident No. 143460

Ident No. 215485

Ident No. 344435

Ident No. 344433

Ident No. 144185

Ident No. 216000

Ident No. 344445

Ident No. 344434

Ident No. 145908

Ident No. 218145

Ident No. 344447

Ident No. 344451

Ident No. 147375

Ident No. 218146

Ident No. 344450

Ident No. 344453

Ident No. 147519

Ident No. 218147

Ident No. 344452

Ident No. 344454

Ident No. 150393

Ident No. 218387

Ident No. 344456

Ident No. 344457

Ident No. 152723

Ident No. 218389

Ident No. 344458

Ident No. 344459

Ident No. 152931

Ident No. 219802

Ident No. 344473

Ident No. 344460

Ident No. 152932

Ident No. 220814

Ident No. 344474

Ident No. 344461

Ident No. 154675

Ident No. 220815

Ident No. 344475

Ident No. 344462

Ident No. 154676

Ident No. 221351

Ident No. 344478

Ident No. 344463

Ident No. 154681

Ident No. 223638

Ident No. 344479

Ident No. 344464

Ident No. 154880

Ident No. 224931

Ident No. 344480

Ident No. 344465

Ident No. 154887

Ident No. 225244

Ident No. 344482

Ident No. 344485

Ident No. 154888

Ident No. 225425

Ident No. 344483

Ident No. 344487

Ident No. 154889

Ident No. 226632

Ident No. 344484

Ident No. 344522

Ident No. 154890

Ident No. 227081

Ident No. 344499

Ident No. 344523

Ident No. 154891

Ident No. 227528

Ident No. 344503

Ident No. 344526

Ident No. 154987

Ident No. 228061

Ident No. 344504

Ident No. 344527

Ident No. 155072

Ident No. 228325

Ident No. 344509

Ident No. 344528

Ident No. 155741

Ident No. 228375

Ident No. 344511

Ident No. 344530

Ident No. 156213

Ident No. 228904

Ident No. 344512

Ident No. 344531

Ident No. 156270

Ident No. 229262

Ident No. 344520

Ident No. 344532

Ident No. 157013

Ident No. 229875

Ident No. 344521

Ident No. 344533

Ident No. 159650

Ident No. 229907

Ident No. 344538

Ident No. 344534

Ident No. 160538

Ident No. 229908

Ident No. 344540

Ident No. 344535

Ident No. 161472

Ident No. 230133

Ident No. 344541

Ident No. 344536

Ident No. 161855

Ident No. 232790

Ident No. 344547

Ident No. 344537

Ident No. 162511

Ident No. 233035

Ident No. 344551

Ident No. 344549

Ident No. 162591

Ident No. 233037

Ident No. 344555

Ident No. 344550

Ident No. 164238

Ident No. 233038

Ident No. 344556

Ident No. 344554

Ident No. 164239

Ident No. 233040

Ident No. 344557

Ident No. 344583

Ident No. 164579

Ident No. 233041

Ident No. 344558

Ident No. 344602

Ident No. 165420

Ident No. 233191

Ident No. 344559

Ident No. 344614

Ident No. 165588

Ident No. 233358

Ident No. 344560

Ident No. 344617

Ident No. 165985

Ident No. 233359

Ident No. 344561

Ident No. 344625

Ident No. 166294

Ident No. 233442

Ident No. 344562

Ident No. 344630

Ident No. 166315

Ident No. 233445

Ident No. 344564

Ident No. 344632

Ident No. 166536

Ident No. 233447

Ident No. 344565

Ident No. 344633

Ident No. 167371

Ident No. 233449

Ident No. 344566

Ident No. 344634

Ident No. 167389

Ident No. 233611

Ident No. 344567

Ident No. 344636

Ident No. 168136

Ident No. 233613

Ident No. 344568

Ident No. 344645

Ident No. 168835

Ident No. 233837

Ident No. 344569

Ident No. 344646

Ident No. 169989

Ident No. 233839

Ident No. 344571

Ident No. 344652

Ident No. 171013

Ident No. 234336

Ident No. 344573

Ident No. 344653

Ident No. 174554

Ident No. 234712

Ident No. 344574

Ident No. 344654

Ident No. 174671

Ident No. 235835

Ident No. 344576

Ident No. 344655

Ident No. 175574

Ident No. 235927

Ident No. 344580

Ident No. 344656

Ident No. 175575

Ident No. 235932

Ident No. 344581

Ident No. 344657

Ident No. 175576

Ident No. 235933

Ident No. 344582

Ident No. 344658

Ident No. 175580

Ident No. 237056

Ident No. 344587

Ident No. 344659

Ident No. 175749

Ident No. 237208

Ident No. 344600

Ident No. 344661

Ident No. 176451

Ident No. 237212

Ident No. 344603

Ident No. 344663

Ident No. 176729

Ident No. 237214

Ident No. 344605

Ident No. 344664

Ident No. 178612

Ident No. 237523

Ident No. 344639

Ident No. 344665

Ident No. 178613

Ident No. 237524

Ident No. 344641

Ident No. 344666

Ident No. 179461

Ident No. 237706

Ident No. 344642

Ident No. 344667

Ident No. 180376

Ident No. 237707

Ident No. 344643

Ident No. 344668

Ident No. 180377

Ident No. 237708

Ident No. 344669

Ident No. 344673

Ident No. 180378

Ident No. 237780

Ident No. 344671

Ident No. 344674

Ident No. 180380

Ident No. 237931

Ident No. 344672

Ident No. 344676

Ident No. 181965

Ident No. 238064

Ident No. 345470

Ident No. 344679

Ident No. 182750

Ident No. 238092

Ident No. 345471

Ident No. 344681

Ident No. 182796

Ident No. 238252

Ident No. 345475

Ident No. 344682

Ident No. 182917

Ident No. 240110

Ident No. 345476

Ident No. 344683

Ident No. 183193

Ident No. 240111

Ident No. 345478

Ident No. 344684

Ident No. 183245

Ident No. 240113

Ident No. 415070

Ident No. 344685

Ident No. 183246

Ident No. 240114

Ident No. 415071

Ident No. 344686

Ident No. 183247

Ident No. 240116

Ident No. 415072

Ident No. 344687

Ident No. 183248

Ident No. 240201

Ident No. 415075

Ident No. 344688

Ident No. 183249

Ident No. 240203

Ident No. 415076

Ident No. 344690

Ident No. 183264

Ident No. 240666

Ident No. 415077

Ident No. 344691

Ident No. 183265

Ident No. 241197

Ident No. 415078

Ident No. 344692

Ident No. 183266

Ident No. 241738

Ident No. 415079

Ident No. 344693

Ident No. 183267

Ident No. 241925

Ident No. 415080

Ident No. 344694

Ident No. 183268

Ident No. 242232

Ident No. 415081

Ident No. 344695

Ident No. 183269

Ident No. 242625

Ident No. 415082

Ident No. 344696

Ident No. 183270

Ident No. 242627

Ident No. 415083

Ident No. 344697

Ident No. 183271

Ident No. 242628

Ident No. 415084

Ident No. 344698

Ident No. 183273

Ident No. 242724

Ident No. 415085

Ident No. 345485

Ident No. 183278

Ident No. 244518

Ident No. 415086

Ident No. 345487

Ident No. 183279

Ident No. 244520

Ident No. 415087

Ident No. 1239

Ident No. 183280

Ident No. 244800

Ident No. 428538

Ident No. 1368

Ident No. 183283

Ident No. 245004

Ident No. 431530

Ident No. 1372

Ident No. 183284

Ident No. 245261

Ident No. 454610

Ident No. 1373

Ident No. 183286

Ident No. 245389

Ident No. 454624

Ident No. 1377

Ident No. 183288

Ident No. 245520

Ident No. 454625

Ident No. 1402

Ident No. 183290

Ident No. 246066

Ident No. 459053

Ident No. 1414

Ident No. 183291

Ident No. 246067

Ident No. 459054

Ident No. 1415

Ident No. 183603

Ident No. 246069

Ident No. 463393

Ident No. 1416

Ident No. 183755

Ident No. 246070

Ident No. 463570

Ident No. 1448

Ident No. 183756

Ident No. 246166

Ident No. 463571

Ident No. 1488

Ident No. 183757

Ident No. 246639

Ident No. 463574

Ident No. 1489

Ident No. 183758

Ident No. 246722

Ident No. 463575

Ident No. 1490

Ident No. 184195

Ident No. 247191

Ident No. 463591

Ident No. 1491

Ident No. 185071

Ident No. 248230

Ident No. 463616

Ident No. 1492

Ident No. 185734

Ident No. 249003

Ident No. 463624

Ident No. 1595

Ident No. 185736

Ident No. 250561

Ident No. 463634

Ident No. 1601

Ident No. 186108

Ident No. 252542

Ident No. 463641

Ident No. 1603

Ident No. 186286

Ident No. 253955

Ident No. 463647

Ident No. 1668

Ident No. 186512

Ident No. 253998

Ident No. 464014

Ident No. 1669

Ident No. 186531

Ident No. 256031

Ident No. 464854

Ident No. 1703

Ident No. 186548

Ident No. 256894

Ident No. 464855

Ident No. 1710

Ident No. 186549

Ident No. 257384

Ident No. 465824

Ident No. 1712

Ident No. 186550

Ident No. 257579

Ident No. 505052

Ident No. 1716

Ident No. 186552

Ident No. 260222

Ident No. 505054

Ident No. 1719

Ident No. 186572

Ident No. 260653

Ident No. 507328

Ident No. 1937

Ident No. 186577

Ident No. 260689

Ident No. 507340

Ident No. 2012

Ident No. 186578

Ident No. 261757

Ident No. 507383

Ident No. 2023

Ident No. 186579

Ident No. 263385

Ident No. 507490

The post Type 2000 Burkert - Van góc Burkert Type 2000 - Burkert Vietnam appeared first on thietbicongnghiepnang.com.

]]>

Tăng Minh Phát - Đại lý lý phân Burkert Việt Nam

Type 2000 Burkert Vietnam - Van góc Type 2000 Burkert

Type 2000

Pneumatically operated 2/2 way angle seat valve CLASSIC

  • Stainless steel or gunmetal housing with sleeve, clamped or welded connection
  • Long service life
  • High flow rate
  • Robust actuators with modular accessory program

Order Ident No.

Ident No. 1134

Ident No. 2047

Ident No. 186588

Ident No. 263513

Ident No. 1140

Ident No. 2072

Ident No. 186721

Ident No. 264880

Ident No. 1251

Ident No. 2149

Ident No. 186725

Ident No. 266338

Ident No. 1392

Ident No. 2151

Ident No. 186785

Ident No. 267168

Ident No. 1393

Ident No. 2158

Ident No. 186787

Ident No. 269760

Ident No. 1394

Ident No. 2159

Ident No. 186919

Ident No. 270158

Ident No. 1397

Ident No. 2160

Ident No. 186967

Ident No. 271077

Ident No. 1401

Ident No. 2164

Ident No. 186969

Ident No. 272623

Ident No. 1447

Ident No. 2170

Ident No. 186970

Ident No. 274613

Ident No. 1449

Ident No. 2171

Ident No. 186971

Ident No. 274620

Ident No. 1593

Ident No. 2172

Ident No. 187004

Ident No. 274662

Ident No. 2150

Ident No. 2180

Ident No. 187338

Ident No. 276905

Ident No. 142613

Ident No. 2181

Ident No. 187584

Ident No. 277104

Ident No. 143443

Ident No. 2186

Ident No. 187630

Ident No. 277502

Ident No. 143444

Ident No. 2325

Ident No. 187635

Ident No. 279635

Ident No. 143445

Ident No. 2380

Ident No. 187637

Ident No. 282541

Ident No. 143448

Ident No. 2381

Ident No. 187638

Ident No. 282739

Ident No. 154678

Ident No. 2382

Ident No. 187670

Ident No. 283236

Ident No. 169344

Ident No. 2383

Ident No. 187681

Ident No. 286081

Ident No. 178614

Ident No. 2384

Ident No. 187683

Ident No. 289110

Ident No. 210644

Ident No. 2385

Ident No. 187684

Ident No. 289111

Ident No. 212149

Ident No. 2386

Ident No. 187832

Ident No. 289112

Ident No. 246068

Ident No. 2393

Ident No. 187833

Ident No. 289113

Ident No. 246071

Ident No. 2433

Ident No. 187852

Ident No. 289137

Ident No. 342352

Ident No. 2435

Ident No. 187857

Ident No. 289637

Ident No. 344381

Ident No. 3063

Ident No. 187864

Ident No. 289642

Ident No. 344382

Ident No. 130505

Ident No. 187866

Ident No. 289644

Ident No. 344383

Ident No. 130687

Ident No. 187929

Ident No. 289679

Ident No. 344384

Ident No. 130689

Ident No. 187957

Ident No. 290011

Ident No. 344385

Ident No. 131830

Ident No. 189318

Ident No. 290659

Ident No. 344386

Ident No. 131898

Ident No. 189319

Ident No. 293200

Ident No. 344387

Ident No. 131899

Ident No. 189367

Ident No. 293452

Ident No. 344388

Ident No. 137260

Ident No. 189403

Ident No. 293622

Ident No. 344389

Ident No. 137261

Ident No. 189944

Ident No. 297465

Ident No. 344390

Ident No. 137362

Ident No. 189945

Ident No. 326350

Ident No. 344395

Ident No. 137552

Ident No. 202929

Ident No. 331340

Ident No. 344396

Ident No. 140963

Ident No. 204259

Ident No. 336548

Ident No. 344397

Ident No. 141950

Ident No. 204361

Ident No. 337466

Ident No. 344398

Ident No. 142253

Ident No. 206117

Ident No. 337569

Ident No. 344400

Ident No. 142615

Ident No. 206270

Ident No. 338952

Ident No. 344401

Ident No. 143450

Ident No. 206485

Ident No. 339560

Ident No. 344402

Ident No. 143452

Ident No. 208289

Ident No. 340137

Ident No. 344405

Ident No. 143453

Ident No. 209045

Ident No. 340589

Ident No. 344406

Ident No. 143454

Ident No. 209346

Ident No. 340590

Ident No. 344407

Ident No. 143455

Ident No. 209596

Ident No. 340591

Ident No. 344408

Ident No. 143456

Ident No. 211252

Ident No. 340787

Ident No. 344411

Ident No. 143457

Ident No. 212911

Ident No. 344393

Ident No. 344412

Ident No. 143458

Ident No. 213439

Ident No. 344399

Ident No. 344413

Ident No. 143459

Ident No. 215321

Ident No. 344409

Ident No. 344432

Ident No. 143460

Ident No. 215485

Ident No. 344435

Ident No. 344433

Ident No. 144185

Ident No. 216000

Ident No. 344445

Ident No. 344434

Ident No. 145908

Ident No. 218145

Ident No. 344447

Ident No. 344451

Ident No. 147375

Ident No. 218146

Ident No. 344450

Ident No. 344453

Ident No. 147519

Ident No. 218147

Ident No. 344452

Ident No. 344454

Ident No. 150393

Ident No. 218387

Ident No. 344456

Ident No. 344457

Ident No. 152723

Ident No. 218389

Ident No. 344458

Ident No. 344459

Ident No. 152931

Ident No. 219802

Ident No. 344473

Ident No. 344460

Ident No. 152932

Ident No. 220814

Ident No. 344474

Ident No. 344461

Ident No. 154675

Ident No. 220815

Ident No. 344475

Ident No. 344462

Ident No. 154676

Ident No. 221351

Ident No. 344478

Ident No. 344463

Ident No. 154681

Ident No. 223638

Ident No. 344479

Ident No. 344464

Ident No. 154880

Ident No. 224931

Ident No. 344480

Ident No. 344465

Ident No. 154887

Ident No. 225244

Ident No. 344482

Ident No. 344485

Ident No. 154888

Ident No. 225425

Ident No. 344483

Ident No. 344487

Ident No. 154889

Ident No. 226632

Ident No. 344484

Ident No. 344522

Ident No. 154890

Ident No. 227081

Ident No. 344499

Ident No. 344523

Ident No. 154891

Ident No. 227528

Ident No. 344503

Ident No. 344526

Ident No. 154987

Ident No. 228061

Ident No. 344504

Ident No. 344527

Ident No. 155072

Ident No. 228325

Ident No. 344509

Ident No. 344528

Ident No. 155741

Ident No. 228375

Ident No. 344511

Ident No. 344530

Ident No. 156213

Ident No. 228904

Ident No. 344512

Ident No. 344531

Ident No. 156270

Ident No. 229262

Ident No. 344520

Ident No. 344532

Ident No. 157013

Ident No. 229875

Ident No. 344521

Ident No. 344533

Ident No. 159650

Ident No. 229907

Ident No. 344538

Ident No. 344534

Ident No. 160538

Ident No. 229908

Ident No. 344540

Ident No. 344535

Ident No. 161472

Ident No. 230133

Ident No. 344541

Ident No. 344536

Ident No. 161855

Ident No. 232790

Ident No. 344547

Ident No. 344537

Ident No. 162511

Ident No. 233035

Ident No. 344551

Ident No. 344549

Ident No. 162591

Ident No. 233037

Ident No. 344555

Ident No. 344550

Ident No. 164238

Ident No. 233038

Ident No. 344556

Ident No. 344554

Ident No. 164239

Ident No. 233040

Ident No. 344557

Ident No. 344583

Ident No. 164579

Ident No. 233041

Ident No. 344558

Ident No. 344602

Ident No. 165420

Ident No. 233191

Ident No. 344559

Ident No. 344614

Ident No. 165588

Ident No. 233358

Ident No. 344560

Ident No. 344617

Ident No. 165985

Ident No. 233359

Ident No. 344561

Ident No. 344625

Ident No. 166294

Ident No. 233442

Ident No. 344562

Ident No. 344630

Ident No. 166315

Ident No. 233445

Ident No. 344564

Ident No. 344632

Ident No. 166536

Ident No. 233447

Ident No. 344565

Ident No. 344633

Ident No. 167371

Ident No. 233449

Ident No. 344566

Ident No. 344634

Ident No. 167389

Ident No. 233611

Ident No. 344567

Ident No. 344636

Ident No. 168136

Ident No. 233613

Ident No. 344568

Ident No. 344645

Ident No. 168835

Ident No. 233837

Ident No. 344569

Ident No. 344646

Ident No. 169989

Ident No. 233839

Ident No. 344571

Ident No. 344652

Ident No. 171013

Ident No. 234336

Ident No. 344573

Ident No. 344653

Ident No. 174554

Ident No. 234712

Ident No. 344574

Ident No. 344654

Ident No. 174671

Ident No. 235835

Ident No. 344576

Ident No. 344655

Ident No. 175574

Ident No. 235927

Ident No. 344580

Ident No. 344656

Ident No. 175575

Ident No. 235932

Ident No. 344581

Ident No. 344657

Ident No. 175576

Ident No. 235933

Ident No. 344582

Ident No. 344658

Ident No. 175580

Ident No. 237056

Ident No. 344587

Ident No. 344659

Ident No. 175749

Ident No. 237208

Ident No. 344600

Ident No. 344661

Ident No. 176451

Ident No. 237212

Ident No. 344603

Ident No. 344663

Ident No. 176729

Ident No. 237214

Ident No. 344605

Ident No. 344664

Ident No. 178612

Ident No. 237523

Ident No. 344639

Ident No. 344665

Ident No. 178613

Ident No. 237524

Ident No. 344641

Ident No. 344666

Ident No. 179461

Ident No. 237706

Ident No. 344642

Ident No. 344667

Ident No. 180376

Ident No. 237707

Ident No. 344643

Ident No. 344668

Ident No. 180377

Ident No. 237708

Ident No. 344669

Ident No. 344673

Ident No. 180378

Ident No. 237780

Ident No. 344671

Ident No. 344674

Ident No. 180380

Ident No. 237931

Ident No. 344672

Ident No. 344676

Ident No. 181965

Ident No. 238064

Ident No. 345470

Ident No. 344679

Ident No. 182750

Ident No. 238092

Ident No. 345471

Ident No. 344681

Ident No. 182796

Ident No. 238252

Ident No. 345475

Ident No. 344682

Ident No. 182917

Ident No. 240110

Ident No. 345476

Ident No. 344683

Ident No. 183193

Ident No. 240111

Ident No. 345478

Ident No. 344684

Ident No. 183245

Ident No. 240113

Ident No. 415070

Ident No. 344685

Ident No. 183246

Ident No. 240114

Ident No. 415071

Ident No. 344686

Ident No. 183247

Ident No. 240116

Ident No. 415072

Ident No. 344687

Ident No. 183248

Ident No. 240201

Ident No. 415075

Ident No. 344688

Ident No. 183249

Ident No. 240203

Ident No. 415076

Ident No. 344690

Ident No. 183264

Ident No. 240666

Ident No. 415077

Ident No. 344691

Ident No. 183265

Ident No. 241197

Ident No. 415078

Ident No. 344692

Ident No. 183266

Ident No. 241738

Ident No. 415079

Ident No. 344693

Ident No. 183267

Ident No. 241925

Ident No. 415080

Ident No. 344694

Ident No. 183268

Ident No. 242232

Ident No. 415081

Ident No. 344695

Ident No. 183269

Ident No. 242625

Ident No. 415082

Ident No. 344696

Ident No. 183270

Ident No. 242627

Ident No. 415083

Ident No. 344697

Ident No. 183271

Ident No. 242628

Ident No. 415084

Ident No. 344698

Ident No. 183273

Ident No. 242724

Ident No. 415085

Ident No. 345485

Ident No. 183278

Ident No. 244518

Ident No. 415086

Ident No. 345487

Ident No. 183279

Ident No. 244520

Ident No. 415087

Ident No. 1239

Ident No. 183280

Ident No. 244800

Ident No. 428538

Ident No. 1368

Ident No. 183283

Ident No. 245004

Ident No. 431530

Ident No. 1372

Ident No. 183284

Ident No. 245261

Ident No. 454610

Ident No. 1373

Ident No. 183286

Ident No. 245389

Ident No. 454624

Ident No. 1377

Ident No. 183288

Ident No. 245520

Ident No. 454625

Ident No. 1402

Ident No. 183290

Ident No. 246066

Ident No. 459053

Ident No. 1414

Ident No. 183291

Ident No. 246067

Ident No. 459054

Ident No. 1415

Ident No. 183603

Ident No. 246069

Ident No. 463393

Ident No. 1416

Ident No. 183755

Ident No. 246070

Ident No. 463570

Ident No. 1448

Ident No. 183756

Ident No. 246166

Ident No. 463571

Ident No. 1488

Ident No. 183757

Ident No. 246639

Ident No. 463574

Ident No. 1489

Ident No. 183758

Ident No. 246722

Ident No. 463575

Ident No. 1490

Ident No. 184195

Ident No. 247191

Ident No. 463591

Ident No. 1491

Ident No. 185071

Ident No. 248230

Ident No. 463616

Ident No. 1492

Ident No. 185734

Ident No. 249003

Ident No. 463624

Ident No. 1595

Ident No. 185736

Ident No. 250561

Ident No. 463634

Ident No. 1601

Ident No. 186108

Ident No. 252542

Ident No. 463641

Ident No. 1603

Ident No. 186286

Ident No. 253955

Ident No. 463647

Ident No. 1668

Ident No. 186512

Ident No. 253998

Ident No. 464014

Ident No. 1669

Ident No. 186531

Ident No. 256031

Ident No. 464854

Ident No. 1703

Ident No. 186548

Ident No. 256894

Ident No. 464855

Ident No. 1710

Ident No. 186549

Ident No. 257384

Ident No. 465824

Ident No. 1712

Ident No. 186550

Ident No. 257579

Ident No. 505052

Ident No. 1716

Ident No. 186552

Ident No. 260222

Ident No. 505054

Ident No. 1719

Ident No. 186572

Ident No. 260653

Ident No. 507328

Ident No. 1937

Ident No. 186577

Ident No. 260689

Ident No. 507340

Ident No. 2012

Ident No. 186578

Ident No. 261757

Ident No. 507383

Ident No. 2023

Ident No. 186579

Ident No. 263385

Ident No. 507490

]]>
Đại lý Matsushima Việt Nam | Matsushima Vietnam http://thietbicongnghiepnang.com/dai-ly-matsushima-viet-nam-tmp-vietnam 2019-03-03 22:10:42 http://thietbicongnghiepnang.com/dai-ly-matsushima-viet-nam-tmp-vietnam

Matsushima chuyên cung cấp các sản phẩm cho các ngành công nghiệp như : xi măng, khai thác khoáng sản, chế biến thức ăn gia súc

Đại lý Matsushima Việt Nam - TMP VIETNAM

Readmore

Matsushima VietNam | Nhà phân phối thiết bị của hãng Matsushima tại Việt Nam

 KÍNH GỬI QUÍ KHÁCH HÀNG :

Matsushima - Japan : cung cấp các giải pháp về báo lệch băng tải, thiết bị tự động căng chỉnh băng tải, cảm biến đo mức ( radar, siêu âm,điện dung...), công tắc an toàn, công tắc giật dây....cho các ngành công nghiệp như : xi măng, bao bì, thức ăn gia súc, thép, dệt, thủy điện, nhiệt điện, đặc biệt là ngành khai thác khoáng sản..

Mục lục nội dung

Hiện nay Tăng Minh Phát là Đại lý phân phối chính thức Matsushima tại Việt Nam.

Một số sản phẩm của hãng Matsushima cung cấp trên thị trường Việt Nam :

1. Thiết bị bảo vệ băng tải Matsushima | Belt Conveyor Protection Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Công tắc điều chỉnh tốc độ Matsushima | Speed Switch (NON-CONTACT TYPE)

Đại lý Matsushima Việt Nam - TMP VIETNAM

                                                   Cảm biến tốc độ Matsushima

SPEED SWITCH is a non-contact type motion sensor to detect the revolving speed of machinery shaft and operates output relay when the speed reaches setting value.

Công tắc điều chỉnh tốc độ còn được gọi là cảm biến tốc độ được sử dụng để phát hiện xem trục quay có quay trong nhiều máy móc, băng tải, nhà máy điện và trong các ngành công nghiệp liên quan đến sản xuất xi măng, đường, dệt may, giấy, sane xuất than, ...sử dụng các công nghệ cơ điện, điện tử hoặc từ tính

Model : ESPB-050, ESPB-051, TL-N20MD1, ATS-051, ESAW-102/132, ESKB-610M/MU

  • Power supply : AC20 - 240V , DC24V
  • Range of Actuation speed : 2 - 3600P/min
  • Speed display : 2 - 3600P/min
  • Contact output : A contact x 2

b. Công tắc giám sát tốc độ Matsushima | Speed Switch (SHAFT-CONNECTING TYPE)

Công tắc giám sát tốc độ băng tải của hãng Matsushima tại Việt Nam

Speed Switch is applicable to confirm if a mechanical shaft, which rotates in extra-low speed as typified by“ sending roller of reheat furnace”,“low speed agitator or thickener” ,etc.,rotates in proper speed.

Extra-low speed type
Rated speed : 179rpm Max.
Actuating speed : 0.1rpm to 99.9rpm

c. Magnetic Type Speed Relay

Speed Relay is a mechanical type motion sensor for monitoring operation speed of belt conveyors, cranes, crushers, etc., and operates when speed of the machine shaft becomes the setting speed. Since the microswitch in Speed Relay is mechanically turned ON or OFF by induction torque generated by rotation of the permanent magnet, the power supply is not necessary. Besides, the maintenance is easy.

Model : ESRW-120, ESRW-122, ESRW-302, ESRW-322

Overspeed and Slip Detection
Rated speed : 80rpm to 1800rpm
                    : 33m/min. to 300m/min.
Actuating speed : 60rpm (Minimum setting speed)

d. Công tắc giật dậy Matsushima | Pull Cord Switch Matsushima

Công tắc giật dây Matsushima là một trong những thiết kế cực kì thông minh để đảm bảo an toàn cho người lao động, cũng như tránh các hư hỏng nghiêm trọng trong nhà máy. Khi xảy ra sự cố, người dùng có thể tắt hệ thống từ bất kì vị trí nào trong hệ thống.

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position. According to the Industrial Safety & Health Regulations, it has been assigned to install the Pull Cord Switch to belt conveyor in Japan.

Model : ELAW-21, ELAM-21W, ELADP-21W

              ELAW-31, ELAM-31W, ELADP-32W

              ELAW-61P, ELAM-61PW, ELADP-62PW

Belt Conveyor Emergency-stop Switch
Reset system : Self-reset
                        Manual-reset
Required force of pull cord : 49±9.8N(5 ± 1kgf)

e. Công tắc giật dây dừng khẩn cấp Matsushima | Wire-rope type Emergency Stop Switch PULLSTOP

Đại lý Matsushima Việt Nam - TMP VIETNAM

               Công tắc giật dây dừng khẩn cấp ERTD-50 Matsushima

For Emergency-stop
Reset Type Manual-reset
Operating torque 98N(with tension spring)

Model : ERTD-50

f. Công tắc báo lệch băng tải Matsushima | Belt sway switch Matsushima

  • For Sway and Deviation Detection
  • Reset system Self-reset
  • Contacts : 1 contact for alarm

                           1 contact for emergency stop

Model : Elap-20

Belt Sway Switch is a protective switch for detecting the meandering (sway or deviation) of belt conveyors, and sends out an alarm signal and an emergency stop signal. Suited to be used for belt breakage prevention and orefalling prevention due to the belt sway. Widely used in iron and steel, cement and chemical plants, thermal power plants, etc., since it is essential for safety operation of belt conveyors.

g. Belt Tear Detector

Đại lý Matsushima Việt Nam - TMP VIETNAM
  • Detection of Conveyor Belt Breaking Accident
  • Detecting method Silicon rubber compressing system
  • Installation Between Impact rollers
  • Size Belt width 600~2200mm
  • Output contact 1 detection contact (Cap. AC 250V 2A)

Model : SCPT-060-30, SCPT-075-30, SCPT-090-30, SCPT-100-30, SCPT-105-30, SCPT-120-30, SCPT-140-30, SCPT-160-30, SCPT-180-30, SCPT-200-30

h. Motor-Operated Adjusting Carrier

  • For Belt Sway Correction
  • Belt width 500mm to 2000mm
  • Belt speed 250m/min. or below
  • Trough angle 0 to 45°
HAB-MC-050 HAB-MC-160 HAB-DC-135302H HAB-MR-075052H
HAB-MC-060 HAB-MC-180 HAB-DC-140302H HAB-MR-090052H
HAB-MC-075 HAB-MC-200 HAB-DC-150302H HAB-MR-100052H
HAB-MC-090 HAB-DC-050302H HAB-DC-160302H HAB-MR-105052H
HAB-MC-100 HAB-DC-060302H HAB-DC-180302H HAB-MR-120052H
HAB-MC-105 HAB-DC-075302H HAB-DC-200302H HAB-MR-135052H
HAB-MC-120 HAB-DC-090302H HAB-DC-120302H HAB-MR-140052H
HAB-MC-135 HAB-DC-100302H HAB-MR-045052H HAB-MR-160052H
HAB-MC-140 HAB-DC-105302H HAB-MR-050052H HAB-MR-180052H

2. Cảm biến đo mức Matsushima | Continuous Level Measurement Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Cảm biến đo mức chất rắn bằng sóng Radar Matsushima | Radar Level Transmitter (FOR POWDER)

The Radar Level Transmitter is designed specitically for medium/long range measurement of all kinds of power,particle and bulk solids. The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters. The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Cảm biến Radar đo mức bột Matsushima

Model : MWLM-PR26C, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H2F

b. Cảm biến đo mức chất lỏng bằng sóng Radar | Radar Level Transmitter (FOR LIQUID)

The Radar Level Transmitter is designed specitically for short/medium range measurement of liquid,sludge and slurry.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Model : MWLM-PR26C1G, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H3G, MWLM-PR26H3F, MWLM-PR26H3S, MWLM-PR26H7G, MWLM-PR26H7F, MWLM-PR26H7S

  • Measurement of liquid level
  • Measurement range : 0.3(from end of antenna) to 10.0m
  • Accuracy : ±0.25% F.S.

c. Cảm biến đo mức chất rắn bằng sóng siêu âm Matsushima | Ultrasonic Transmitter (FOR POWDER)

The ultrasonic level meter is designed specially for medium range measurement of powder and liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters.

Cảm biến siêu âm đo mức Matsushima

Model : USLM-PE92F, USLM-PE92S, USLM-PE92B, USLM-PE92SB, USLM-PE93F, USLM-PE93S, USLM-PE93B, USLM-PE93SB

  • Measurement of powder and liquid levels
  • Measurement ・Integrated ・Adjustable ・Separate ・Model
  • range -flange type -flange type type
  • Powder(liquid), Powder(liquid), Powder(liquid)
  • 1.1-10m(25m), 0.9-10m(25m), 0.9-10m(25m) PE93
  • 1.1-20m(45m), 0.9-20m(45m), 0.9-20m(45m) PE95
  • Accuracy : ±0.25% F.S.

d. Cảm biến đo mức chất long bằng sóng siêu âm Matsushima | Ultrasonic Transmitter

The ultrasonic level meter is designed specifically for short range measurement of liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters. The instrument fulfills its function even in severe environmental conditions where corrosive gas or vapor is generated.

Cảm biến siêu âm đo mức chất lỏng Matsushima

  • Measurement of liquid levels
  • Measurement range ・Measurement ・Separate type ・typerange 

                                             0.6~10m 0.5~10m PE92

  • Accuracy : ±0.25% F.S

Model : USLM-PE95F, USLM-PE95S, USLM-PE95B

e. Bộ hiển thị tín hiệu Matsushima

f. Encoder Matsushima

3. Point Level Detection & Power Measurement

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Admittance Level Switch Matsushima

  • Product Structure: Rod type, Wire type
  • Power Supply: AC/DC22~264V 50/60Hz
  • Power Consumption: 4.7W(AC), 1.8W(DC)
  • Mounting: R1 Thread (rod type)
  • JIS5K65A flange (wire type)
  • Length: Rod 0.25~2m
  • Wire : 0.7~10m
  • Range: range 1 : 0~10pF

                                     range 2 : 0~50pF
                                     range 3 : 0~100pF
                                    range 4 : 0~1000pF

  • Signal Output: 1C

Model : MAL-110, MAL-120

b. Conductive Level Switch

  • Level Detection for Powder Material
  • Probe length : Max.5m

Model : AMVC-300, MF IP-031W

c. Full Detector

  • Upper Detection for Bulk Solids
  • Detecting method : Tilting angle detection
  • Suspending distance : (Max.5mm) from the mouning surface

Model : MFFC-20C, AMDC-12C

d. Dust Monitor

  • For Detection of leakage of dust collector and bag filter breakage
  • Measurement range : 0.1mg/㎥~1000mg/㎥
  • Gas flow rate : 4.0 m/s or greater
  • Output signal : 4 to 20 mADC (500Ω)
  • Contact output : 2 NONC contact for upper limit alarm                                                                                                                                                    1 NONC contact for fault alarm

Model : PFM-M01E, PFM-M11P, PFM-M11PT, PFM-M01PEX

e. Dust Switch

  • For detection of broken bag of compact dust collector
  • Particle size : 0.3 micrometer of higher
  • Velocity : 4.0 m/s or higher
  • Output signal open collector output (NPN)
  • Model : PFM-DSW10

e. Microwave Flow Switch

  • ​​​​​Non-Contact Movement Detection Sensor
  • Setting range : Max. 1.5m
  • Frequency : 24GHz band
  • Allowable pressure approx : -980MPa~+980MPa
  • Model : MWFS-SW-02C

g. Microwave Flow Monitor

  • Monitoring the relative flow rate balance of multi-branched piping system
  • Measurement principle Microwave method
  • Measurement frequency : 24.15 GHz
  • Accuracy of repeatability : ±5%
  • Pipe diameter : 200mm or below

Model : MWFM-AN-01

Các sản phẩm của Matsushima được sử dụng rộng rãi trong các ngành công nghiệp như : xi măng, khai thác khoáng sản, nhiệt điện, chế biến thức ăn gia súc.

Xem thêm chi tiết : TẠI ĐÂY

The post Đại lý Matsushima Việt Nam | Matsushima Vietnam appeared first on thietbicongnghiepnang.com.

]]>
Matsushima VietNam | Nhà phân phối thiết bị của hãng Matsushima tại Việt Nam

 KÍNH GỬI QUÍ KHÁCH HÀNG :

Matsushima - Japan : cung cấp các giải pháp về báo lệch băng tải, thiết bị tự động căng chỉnh băng tải, cảm biến đo mức ( radar, siêu âm,điện dung...), công tắc an toàn, công tắc giật dây....cho các ngành công nghiệp như : xi măng, bao bì, thức ăn gia súc, thép, dệt, thủy điện, nhiệt điện, đặc biệt là ngành khai thác khoáng sản..

Mục lục nội dung

Hiện nay Tăng Minh Phát là Đại lý phân phối chính thức Matsushima tại Việt Nam.

Một số sản phẩm của hãng Matsushima cung cấp trên thị trường Việt Nam :

1. Thiết bị bảo vệ băng tải Matsushima | Belt Conveyor Protection Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Công tắc điều chỉnh tốc độ Matsushima | Speed Switch (NON-CONTACT TYPE)

Đại lý Matsushima Việt Nam - TMP VIETNAM

                                                   Cảm biến tốc độ Matsushima

SPEED SWITCH is a non-contact type motion sensor to detect the revolving speed of machinery shaft and operates output relay when the speed reaches setting value.

Công tắc điều chỉnh tốc độ còn được gọi là cảm biến tốc độ được sử dụng để phát hiện xem trục quay có quay trong nhiều máy móc, băng tải, nhà máy điện và trong các ngành công nghiệp liên quan đến sản xuất xi măng, đường, dệt may, giấy, sane xuất than, ...sử dụng các công nghệ cơ điện, điện tử hoặc từ tính

Model : ESPB-050, ESPB-051, TL-N20MD1, ATS-051, ESAW-102/132, ESKB-610M/MU

  • Power supply : AC20 - 240V , DC24V
  • Range of Actuation speed : 2 - 3600P/min
  • Speed display : 2 - 3600P/min
  • Contact output : A contact x 2

b. Công tắc giám sát tốc độ Matsushima | Speed Switch (SHAFT-CONNECTING TYPE)

Công tắc giám sát tốc độ băng tải của hãng Matsushima tại Việt Nam

Speed Switch is applicable to confirm if a mechanical shaft, which rotates in extra-low speed as typified by“ sending roller of reheat furnace”,“low speed agitator or thickener” ,etc.,rotates in proper speed.

Extra-low speed type
Rated speed : 179rpm Max.
Actuating speed : 0.1rpm to 99.9rpm

c. Magnetic Type Speed Relay

Speed Relay is a mechanical type motion sensor for monitoring operation speed of belt conveyors, cranes, crushers, etc., and operates when speed of the machine shaft becomes the setting speed. Since the microswitch in Speed Relay is mechanically turned ON or OFF by induction torque generated by rotation of the permanent magnet, the power supply is not necessary. Besides, the maintenance is easy.

Model : ESRW-120, ESRW-122, ESRW-302, ESRW-322

Overspeed and Slip Detection
Rated speed : 80rpm to 1800rpm
                    : 33m/min. to 300m/min.
Actuating speed : 60rpm (Minimum setting speed)

d. Công tắc giật dậy Matsushima | Pull Cord Switch Matsushima

Công tắc giật dây Matsushima là một trong những thiết kế cực kì thông minh để đảm bảo an toàn cho người lao động, cũng như tránh các hư hỏng nghiêm trọng trong nhà máy. Khi xảy ra sự cố, người dùng có thể tắt hệ thống từ bất kì vị trí nào trong hệ thống.

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position. According to the Industrial Safety & Health Regulations, it has been assigned to install the Pull Cord Switch to belt conveyor in Japan.

Model : ELAW-21, ELAM-21W, ELADP-21W

              ELAW-31, ELAM-31W, ELADP-32W

              ELAW-61P, ELAM-61PW, ELADP-62PW

Belt Conveyor Emergency-stop Switch
Reset system : Self-reset
                        Manual-reset
Required force of pull cord : 49±9.8N(5 ± 1kgf)

e. Công tắc giật dây dừng khẩn cấp Matsushima | Wire-rope type Emergency Stop Switch PULLSTOP

Đại lý Matsushima Việt Nam - TMP VIETNAM

               Công tắc giật dây dừng khẩn cấp ERTD-50 Matsushima

For Emergency-stop
Reset Type Manual-reset
Operating torque 98N(with tension spring)

Model : ERTD-50

f. Công tắc báo lệch băng tải Matsushima | Belt sway switch Matsushima

  • For Sway and Deviation Detection
  • Reset system Self-reset
  • Contacts : 1 contact for alarm

                           1 contact for emergency stop

Model : Elap-20

Belt Sway Switch is a protective switch for detecting the meandering (sway or deviation) of belt conveyors, and sends out an alarm signal and an emergency stop signal. Suited to be used for belt breakage prevention and orefalling prevention due to the belt sway. Widely used in iron and steel, cement and chemical plants, thermal power plants, etc., since it is essential for safety operation of belt conveyors.

g. Belt Tear Detector

Đại lý Matsushima Việt Nam - TMP VIETNAM
  • Detection of Conveyor Belt Breaking Accident
  • Detecting method Silicon rubber compressing system
  • Installation Between Impact rollers
  • Size Belt width 600~2200mm
  • Output contact 1 detection contact (Cap. AC 250V 2A)

Model : SCPT-060-30, SCPT-075-30, SCPT-090-30, SCPT-100-30, SCPT-105-30, SCPT-120-30, SCPT-140-30, SCPT-160-30, SCPT-180-30, SCPT-200-30

h. Motor-Operated Adjusting Carrier

  • For Belt Sway Correction
  • Belt width 500mm to 2000mm
  • Belt speed 250m/min. or below
  • Trough angle 0 to 45°
HAB-MC-050 HAB-MC-160 HAB-DC-135302H HAB-MR-075052H
HAB-MC-060 HAB-MC-180 HAB-DC-140302H HAB-MR-090052H
HAB-MC-075 HAB-MC-200 HAB-DC-150302H HAB-MR-100052H
HAB-MC-090 HAB-DC-050302H HAB-DC-160302H HAB-MR-105052H
HAB-MC-100 HAB-DC-060302H HAB-DC-180302H HAB-MR-120052H
HAB-MC-105 HAB-DC-075302H HAB-DC-200302H HAB-MR-135052H
HAB-MC-120 HAB-DC-090302H HAB-DC-120302H HAB-MR-140052H
HAB-MC-135 HAB-DC-100302H HAB-MR-045052H HAB-MR-160052H
HAB-MC-140 HAB-DC-105302H HAB-MR-050052H HAB-MR-180052H

2. Cảm biến đo mức Matsushima | Continuous Level Measurement Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Cảm biến đo mức chất rắn bằng sóng Radar Matsushima | Radar Level Transmitter (FOR POWDER)

The Radar Level Transmitter is designed specitically for medium/long range measurement of all kinds of power,particle and bulk solids. The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters. The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Cảm biến Radar đo mức bột Matsushima

Model : MWLM-PR26C, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H2F

b. Cảm biến đo mức chất lỏng bằng sóng Radar | Radar Level Transmitter (FOR LIQUID)

The Radar Level Transmitter is designed specitically for short/medium range measurement of liquid,sludge and slurry.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Model : MWLM-PR26C1G, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H3G, MWLM-PR26H3F, MWLM-PR26H3S, MWLM-PR26H7G, MWLM-PR26H7F, MWLM-PR26H7S

  • Measurement of liquid level
  • Measurement range : 0.3(from end of antenna) to 10.0m
  • Accuracy : ±0.25% F.S.

c. Cảm biến đo mức chất rắn bằng sóng siêu âm Matsushima | Ultrasonic Transmitter (FOR POWDER)

The ultrasonic level meter is designed specially for medium range measurement of powder and liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters.

Cảm biến siêu âm đo mức Matsushima

Model : USLM-PE92F, USLM-PE92S, USLM-PE92B, USLM-PE92SB, USLM-PE93F, USLM-PE93S, USLM-PE93B, USLM-PE93SB

  • Measurement of powder and liquid levels
  • Measurement ・Integrated ・Adjustable ・Separate ・Model
  • range -flange type -flange type type
  • Powder(liquid), Powder(liquid), Powder(liquid)
  • 1.1-10m(25m), 0.9-10m(25m), 0.9-10m(25m) PE93
  • 1.1-20m(45m), 0.9-20m(45m), 0.9-20m(45m) PE95
  • Accuracy : ±0.25% F.S.

d. Cảm biến đo mức chất long bằng sóng siêu âm Matsushima | Ultrasonic Transmitter

The ultrasonic level meter is designed specifically for short range measurement of liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters. The instrument fulfills its function even in severe environmental conditions where corrosive gas or vapor is generated.

Cảm biến siêu âm đo mức chất lỏng Matsushima

  • Measurement of liquid levels
  • Measurement range ・Measurement ・Separate type ・typerange 

                                             0.6~10m 0.5~10m PE92

  • Accuracy : ±0.25% F.S

Model : USLM-PE95F, USLM-PE95S, USLM-PE95B

e. Bộ hiển thị tín hiệu Matsushima

f. Encoder Matsushima

3. Point Level Detection & Power Measurement

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Admittance Level Switch Matsushima

  • Product Structure: Rod type, Wire type
  • Power Supply: AC/DC22~264V 50/60Hz
  • Power Consumption: 4.7W(AC), 1.8W(DC)
  • Mounting: R1 Thread (rod type)
  • JIS5K65A flange (wire type)
  • Length: Rod 0.25~2m
  • Wire : 0.7~10m
  • Range: range 1 : 0~10pF

                                     range 2 : 0~50pF
                                     range 3 : 0~100pF
                                    range 4 : 0~1000pF

  • Signal Output: 1C

Model : MAL-110, MAL-120

b. Conductive Level Switch

  • Level Detection for Powder Material
  • Probe length : Max.5m

Model : AMVC-300, MF IP-031W

c. Full Detector

  • Upper Detection for Bulk Solids
  • Detecting method : Tilting angle detection
  • Suspending distance : (Max.5mm) from the mouning surface

Model : MFFC-20C, AMDC-12C

d. Dust Monitor

  • For Detection of leakage of dust collector and bag filter breakage
  • Measurement range : 0.1mg/㎥~1000mg/㎥
  • Gas flow rate : 4.0 m/s or greater
  • Output signal : 4 to 20 mADC (500Ω)
  • Contact output : 2 NONC contact for upper limit alarm                                                                                                                                                    1 NONC contact for fault alarm

Model : PFM-M01E, PFM-M11P, PFM-M11PT, PFM-M01PEX

e. Dust Switch

  • For detection of broken bag of compact dust collector
  • Particle size : 0.3 micrometer of higher
  • Velocity : 4.0 m/s or higher
  • Output signal open collector output (NPN)
  • Model : PFM-DSW10

e. Microwave Flow Switch

  • ​​​​​Non-Contact Movement Detection Sensor
  • Setting range : Max. 1.5m
  • Frequency : 24GHz band
  • Allowable pressure approx : -980MPa~+980MPa
  • Model : MWFS-SW-02C

g. Microwave Flow Monitor

  • Monitoring the relative flow rate balance of multi-branched piping system
  • Measurement principle Microwave method
  • Measurement frequency : 24.15 GHz
  • Accuracy of repeatability : ±5%
  • Pipe diameter : 200mm or below

Model : MWFM-AN-01

Các sản phẩm của Matsushima được sử dụng rộng rãi trong các ngành công nghiệp như : xi măng, khai thác khoáng sản, nhiệt điện, chế biến thức ăn gia súc.

Xem thêm chi tiết : TẠI ĐÂY

]]>
MB S860 Temavasconi - Đồng hồ đo áp suất TemaVasconi Việt Nam http://thietbicongnghiepnang.com/mb-s860-temavasconi-dong-ho-do-ap-suat-temavasconi-viet-nam 2019-02-25 11:55:24 http://thietbicongnghiepnang.com/mb-s860-temavasconi-dong-ho-do-ap-suat-temavasconi-viet-nam

Đồng hồ đo áp suất MB S860 TemaVasconi Vietnam

Readmore

Đồng hồ đo áp suất TemaVasconi - MB S860 Temavasconi - TemaVasconi Việt Nam

MANOMETRO TUTTO INOX A FRONTE SOLIDO serie MBS860 ALL ST. ST. SOLID FRONT TYPE PRESSURE GAUGE serie MBS860

The pressure gauges series MBS860, with or without filling fluid, may be installed on every chemical, petrochemical plants, to prevent accidents according to normative EN837-1/ S3 and ANSI B40.1.1

The post MB S860 Temavasconi - Đồng hồ đo áp suất TemaVasconi Việt Nam appeared first on thietbicongnghiepnang.com.

]]>
Đồng hồ đo áp suất TemaVasconi - MB S860 Temavasconi - TemaVasconi Việt Nam

MANOMETRO TUTTO INOX A FRONTE SOLIDO serie MBS860 ALL ST. ST. SOLID FRONT TYPE PRESSURE GAUGE serie MBS860

The pressure gauges series MBS860, with or without filling fluid, may be installed on every chemical, petrochemical plants, to prevent accidents according to normative EN837-1/ S3 and ANSI B40.1.1

]]>
Dwyer 2000 - Đồng hồ đo chênh áp Dwyer 2000 http://thietbicongnghiepnang.com/dong-ho-do-chenh-ap-dwyer-2000 2019-02-22 23:30:48 http://thietbicongnghiepnang.com/dong-ho-do-chenh-ap-dwyer-2000

Đồng hồ đo chênh lệch áp suất

Readmore

Series 2000 Magnehelic® Differential Pressure Gages

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

Đồng hồ đo chênh lệch áp suất Dwyer 2000

Model Description
2000-0 Differential pressure gage, range 0-0.50" w.c., minor divisions .01, calibrated for vertical scale position.
2000-00 Differential pressure gage, range 0-0.25" w.c., minor divisions .005, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2" w.c., minor divisions .005, calibrated for vertical scale position.
2001 Differential pressure gage, range 0-1.0" w.c., minor divisions .02.
2002 Differential pressure gage, range 0-2.0" w.c., minor divisions .05.
2003 Differential pressure gage, range 0-3.0" w.c., minor divisions .10.
2004 Differential pressure gage, range 0-4.0" w.c., minor divisions .10.
2005 Differential pressure gage, range 0-5.0" w.c., minor divisions .10.
2006 Differential pressure gage, range 0-6.0" w.c., minor divisions .20.
2008 Differential pressure gage, range 0-8.0" w.c., minor divisions .20.
2010 Differential pressure gage, range 0-10" w.c., minor divisions .20.
2015 Differential pressure gage, range 0-15" w.c., minor divisions .50.
2020 Differential pressure gage, range 0-20" w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25" w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30" w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40" w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50" w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60" w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80" w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100" w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150" w.c., minor divisions 5.0.

The post Dwyer 2000 - Đồng hồ đo chênh áp Dwyer 2000 appeared first on thietbicongnghiepnang.com.

]]>
Series 2000 Magnehelic® Differential Pressure Gages

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

Đồng hồ đo chênh lệch áp suất Dwyer 2000

Model Description
2000-0 Differential pressure gage, range 0-0.50" w.c., minor divisions .01, calibrated for vertical scale position.
2000-00 Differential pressure gage, range 0-0.25" w.c., minor divisions .005, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2" w.c., minor divisions .005, calibrated for vertical scale position.
2001 Differential pressure gage, range 0-1.0" w.c., minor divisions .02.
2002 Differential pressure gage, range 0-2.0" w.c., minor divisions .05.
2003 Differential pressure gage, range 0-3.0" w.c., minor divisions .10.
2004 Differential pressure gage, range 0-4.0" w.c., minor divisions .10.
2005 Differential pressure gage, range 0-5.0" w.c., minor divisions .10.
2006 Differential pressure gage, range 0-6.0" w.c., minor divisions .20.
2008 Differential pressure gage, range 0-8.0" w.c., minor divisions .20.
2010 Differential pressure gage, range 0-10" w.c., minor divisions .20.
2015 Differential pressure gage, range 0-15" w.c., minor divisions .50.
2020 Differential pressure gage, range 0-20" w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25" w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30" w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40" w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50" w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60" w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80" w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100" w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150" w.c., minor divisions 5.0.
]]>
T110 Wise VietNam - Đồng hồ đo nhiệt độ Wise Control http://thietbicongnghiepnang.com/t110-wise-vietnam-dong-ho-do-nhiet-do-cong-nghiep-wise 2019-02-21 00:01:34 http://thietbicongnghiepnang.com/t110-wise-vietnam-dong-ho-do-nhiet-do-cong-nghiep-wise

Đại lý Wise tại Việt Nam chuyên cung cấp đồng hồ đo nhiệt độ, cảm biến nhiệt độ wise

T110 Wise VietNam - Đồng hồ đo nhiệt độ Wise Control

Readmore

Đồng hồ đo nhiệt độ T110 Wise

Industrial bimetal thermometer_T110
T110 Wise

Service intended

Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation, and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter 50, 65, 75, 100, 125 and 150 mm
Accuracy ±2.0 % of full scale
Temperature element Coiled bimetal
Working range Maximum scale value

Standard features

Location of stem Center back connection, direct
Case 304SS
Cover 304SS
Window Glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 6.0, 6.4, 8.0 and 10.0 mm diameter
304SS, 316SS and 316L SS
Max. Insertion length : 2,000 mm
Zero adjustment Internal
Stem, process connection ¼", ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale
Not available with diameter 50 and 65 mm
Certificates ATEX Ex II GD c IIC TX

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

The post T110 Wise VietNam - Đồng hồ đo nhiệt độ Wise Control appeared first on thietbicongnghiepnang.com.

]]>

Đồng hồ đo nhiệt độ T110 Wise

Industrial bimetal thermometer_T110
T110 Wise

Service intended

Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation, and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter 50, 65, 75, 100, 125 and 150 mm
Accuracy ±2.0 % of full scale
Temperature element Coiled bimetal
Working range Maximum scale value

Standard features

Location of stem Center back connection, direct
Case 304SS
Cover 304SS
Window Glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 6.0, 6.4, 8.0 and 10.0 mm diameter
304SS, 316SS and 316L SS
Max. Insertion length : 2,000 mm
Zero adjustment Internal
Stem, process connection ¼", ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale
Not available with diameter 50 and 65 mm
Certificates ATEX Ex II GD c IIC TX

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

]]>
Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM http://thietbicongnghiepnang.com/nha-phan-phoi-burkert-tai-viet-nam 2019-03-07 23:29:08 http://thietbicongnghiepnang.com/nha-phan-phoi-burkert-tai-viet-nam

Công Ty Tăng Minh Phát chuyên phối phối thiết bị của hãng Burkert tại Việt Nam. Với các sản phẩm như : Van điện từ Burkert, Van khí nén Burkert, Van màng Burkert, Van điều khiển Burkert, phao Burkert

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Readmore

Đại lý Burkert tại Việt Nam - Burkert Việt Nam

Burkert nổi tiếng với các sản phẩm về van, thiết bị thủy lực, khí nén thủy lực, van của hãng Burkert được sếp vào hàng van cao cấp hiện nay và đặc biệt có rất nhiều chủng loại đa dạng để có thể đáp ứng đầy đủ và phù hợp với mỗi loại cho từng môi trường hoạt động.

1. Van điện từ Burkert | Van điện từ Solenoid Burkert | Burkert Vietnam

Solenoid Valve Burkert - Van điện từ Burkert - Van điện từ Solenoid Burkert

a. Van điện từ 2/2 Burkert - General Purpose 2/2 Solenoids

Van điện từ 2 cửa 2 vị trí thích hợp sử dụng trong môi trường chất lỏng và khí gas

b. Van điện từ 3/2 Burkert - General Purpose 3/2 Solenoids

Van điện từ 3 cửa 2 vị trí phù hợp trong môi trường chất lỏng và khí có tác động trực tiếp ( direc-acting) hoặc van truyền động servo ( Servo-assisted)

c. Van điện từ nước Burkert - Water Solenoid Valves

Van điện từ nước được sử dụng phổ biến trong công nghiệp, đặc biệt trong ngành nước giải khát.

d. Van điện từ dùng trong môi trường nguy hiểm - Hazardous Location Solenoids

Van điện từ thường dùng trong các môi trường nguy hiểm. Van điện từ Burkert đặt các tiêu chuẩn quốc tế như : ATEX, IECEx, EAC, NEPSI, KOSHA, TIIS

e. Van điện từ cho hơi nước Burkert - Steam Solenoid Valves

f. Van điện từ áp lực cao Burkert - High Pressure

Van điện từ áp suất cao Burkert có thang đo rộng, có thể chịu được áp suất >= 100bar

g. Van điện từ chịu nhiệt Burkert - Cryogenic

h. Van điện từ dùng trong y tế Burkert - Media Separated : thường sử dụng trong lĩnh vực y tế, chế biến thức ăn, hoặc dùng trong phòng sạch ( HVAC)

###Một số model van điện từ Burkert thường dùng : 

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0117

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0121

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0131

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0142

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0201

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0211

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0212

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0253

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0256

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0280

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0283

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0285

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0290

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0293

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0330

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0331

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2400

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5282

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5404

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5406

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6011

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6013

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6027

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6211

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6213

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6221

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6227

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6228

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6281

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6407

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6724

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0300

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0303

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0304

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0311

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0312

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0343

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0344

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0355

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6012

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6014

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0340

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0301

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6240

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6212

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5407

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0400

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0287

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0255

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0200

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6013

2. Van góc Burkert | Angle Seat Valves Burkert | Van 3 ngã Burkert | Van góc nghiêng Burkert

Van góc 3 cửa, 2 trí - Van góc 5 cửa, 2 vịtrí

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2000

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2060

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8801

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8840

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3320

3. Van màng Burkert | Diaphragm Valve

Van điều khiển dạng màng được vận hành bằng khí nén, bao gồm một cơ cấu chấp hành màng và thân van 2 chiều.

  • Normally closed or open
  • Body material: Brass, Stainless steel
  • Double spindle seal
  • Compact design

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3235

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0263

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2030

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2031

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2034

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2006

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2103

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2104

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3323

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3232

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3233

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3234

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2032

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2033

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2105

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3230

4. Van cầu Burkert | Globe Valves Burkert | Van cầu hơi Burkert

  • Actuator isolated from flow path
  • Excellent range and fast response times
  • Low power consumption
  • Orifice sizes 1 to 10 mm
  • Versions: Standard, positioner, process controller and high pressure version up to 22 bar

Type 2002

Type 2006

Type 2012

Type 2101

Type 2106

Type 8840

Type 3280

Type 3321

Type 2036

5. Van bi Burkert | Ball Valves Burkert

Type 2652

Type 2655

Type 2658

Type 8805

Type 2651

Type 2654

Type 2657

Type 2660

Type TKU001

Type TKU002

Type TKU003

Type TKU004

Type 2050

Type 2051

Type 2052

Type 3003

Type 3004

Type 3005

6. Van khí nén Burkert | Pneumatic Control Burkert

Type 1061

Type 5470

Type 6519

Type 8681

Type 8685

Type 8686

Type 8690

Type 8691

Type 8695

Type 8697

7. Van điện từ khí nén Burkert

Type MKRS

Type 0450

Type 5411

Type 6510

Type 6516

Type 6518

8. Van điều khiển Burkert | Van điều khiển bằng khí nén Burkert | Van điều khiển dạng cầu Burkert

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2301

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2380

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2712

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8802

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3361

9. Van điều khiển dạng màng Burkert

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2730

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2731

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2732

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3363

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2103

10. Van truyền động Burkert | Positioners / Process Controllers Burkert 

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8692

Type 8693

Type 8694

Type 8696

Type 8798

Type 8635

Type 8791

Type 8792

Type 8793

Ngoài ra còn có một số loại Van Burkert thông dụng :

Van khí nén điện từ Burkert, Van điều khiển Burkert, Van ngắt Burkert

The post Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]>
Đại lý Burkert tại Việt Nam - Burkert Việt Nam

Burkert nổi tiếng với các sản phẩm về van, thiết bị thủy lực, khí nén thủy lực, van của hãng Burkert được sếp vào hàng van cao cấp hiện nay và đặc biệt có rất nhiều chủng loại đa dạng để có thể đáp ứng đầy đủ và phù hợp với mỗi loại cho từng môi trường hoạt động.

1. Van điện từ Burkert | Van điện từ Solenoid Burkert | Burkert Vietnam

Solenoid Valve Burkert - Van điện từ Burkert - Van điện từ Solenoid Burkert

a. Van điện từ 2/2 Burkert - General Purpose 2/2 Solenoids

Van điện từ 2 cửa 2 vị trí thích hợp sử dụng trong môi trường chất lỏng và khí gas

b. Van điện từ 3/2 Burkert - General Purpose 3/2 Solenoids

Van điện từ 3 cửa 2 vị trí phù hợp trong môi trường chất lỏng và khí có tác động trực tiếp ( direc-acting) hoặc van truyền động servo ( Servo-assisted)

c. Van điện từ nước Burkert - Water Solenoid Valves

Van điện từ nước được sử dụng phổ biến trong công nghiệp, đặc biệt trong ngành nước giải khát.

d. Van điện từ dùng trong môi trường nguy hiểm - Hazardous Location Solenoids

Van điện từ thường dùng trong các môi trường nguy hiểm. Van điện từ Burkert đặt các tiêu chuẩn quốc tế như : ATEX, IECEx, EAC, NEPSI, KOSHA, TIIS

e. Van điện từ cho hơi nước Burkert - Steam Solenoid Valves

f. Van điện từ áp lực cao Burkert - High Pressure

Van điện từ áp suất cao Burkert có thang đo rộng, có thể chịu được áp suất >= 100bar

g. Van điện từ chịu nhiệt Burkert - Cryogenic

h. Van điện từ dùng trong y tế Burkert - Media Separated : thường sử dụng trong lĩnh vực y tế, chế biến thức ăn, hoặc dùng trong phòng sạch ( HVAC)

###Một số model van điện từ Burkert thường dùng : 

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0117

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0121

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0131

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0142

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0201

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0211

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0212

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0253

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0256

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0280

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0283

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0285

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0290

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0293

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0330

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0331

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2400

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5282

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5404

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5406

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6011

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6013

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6027

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6211

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6213

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6221

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6227

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6228

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6281

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6407

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6724

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0300

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0303

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0304

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0311

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0312

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0343

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0344

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0355

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6012

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6014

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0340

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0301

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6240

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6212

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 5407

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0400

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0287

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0255

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0200

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 6013

2. Van góc Burkert | Angle Seat Valves Burkert | Van 3 ngã Burkert | Van góc nghiêng Burkert

Van góc 3 cửa, 2 trí - Van góc 5 cửa, 2 vịtrí

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2000

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2060

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8801

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8840

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3320

3. Van màng Burkert | Diaphragm Valve

Van điều khiển dạng màng được vận hành bằng khí nén, bao gồm một cơ cấu chấp hành màng và thân van 2 chiều.

  • Normally closed or open
  • Body material: Brass, Stainless steel
  • Double spindle seal
  • Compact design

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3235

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 0263

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2030

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2031

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2034

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2006

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2103

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2104

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3323

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3232

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3233

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3234

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2032

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2033

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2105

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3230

4. Van cầu Burkert | Globe Valves Burkert | Van cầu hơi Burkert

  • Actuator isolated from flow path
  • Excellent range and fast response times
  • Low power consumption
  • Orifice sizes 1 to 10 mm
  • Versions: Standard, positioner, process controller and high pressure version up to 22 bar

Type 2002

Type 2006

Type 2012

Type 2101

Type 2106

Type 8840

Type 3280

Type 3321

Type 2036

5. Van bi Burkert | Ball Valves Burkert

Type 2652

Type 2655

Type 2658

Type 8805

Type 2651

Type 2654

Type 2657

Type 2660

Type TKU001

Type TKU002

Type TKU003

Type TKU004

Type 2050

Type 2051

Type 2052

Type 3003

Type 3004

Type 3005

6. Van khí nén Burkert | Pneumatic Control Burkert

Type 1061

Type 5470

Type 6519

Type 8681

Type 8685

Type 8686

Type 8690

Type 8691

Type 8695

Type 8697

7. Van điện từ khí nén Burkert

Type MKRS

Type 0450

Type 5411

Type 6510

Type 6516

Type 6518

8. Van điều khiển Burkert | Van điều khiển bằng khí nén Burkert | Van điều khiển dạng cầu Burkert

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2301

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2380

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2712

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 8802

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3361

9. Van điều khiển dạng màng Burkert

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2730

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2731

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2732

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 3363

Nhà phân phối Burkert tại Việt Nam - TMP VIETNAM

Type 2103

10. Van truyền động Burkert | Positioners / Process Controllers Burkert 

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8692

Type 8693

Type 8694

Type 8696

Type 8798

Type 8635

Type 8791

Type 8792

Type 8793

Ngoài ra còn có một số loại Van Burkert thông dụng :

Van khí nén điện từ Burkert, Van điều khiển Burkert, Van ngắt Burkert

]]>
T190 Wise VietNam - Đồng hồ đo nhiệt độ Wise control http://thietbicongnghiepnang.com/t190-wise-vietnam-dong-ho-do-nhiet-do-wise-control 2019-02-20 23:54:17 http://thietbicongnghiepnang.com/t190-wise-vietnam-dong-ho-do-nhiet-do-wise-control

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

T190 Wise VietNam - Đồng hồ đo nhiệt độ Wise control

Readmore

Đồng hồ đo nhiệt độ T190 Wise

Process industry bimetal thermometer with adjustable stem_T190

T190 Wise

Service intended

        Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter 75, 100, 125 and 150 mm
Accuracy ±2.0 % of full scale
Temperature element Coiled bimetal
Working range Maximum scale value

Standard features

Location of stem Center back with adjustable stem
Case 304SS, Adjustable on stem 90°
Cover 304SS
Window Glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 6.0, 6.4, 8.0 and 10.0 mm diameter
304SS, 316SS and 316L SS
Max. Insertion length : 2,000 mm
Zero adjustment External
Stem, process connection ¼", ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale
Window : Safety glass
Special range : 0 ~ 600 ℃

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

The post T190 Wise VietNam - Đồng hồ đo nhiệt độ Wise control appeared first on thietbicongnghiepnang.com.

]]>

Đồng hồ đo nhiệt độ T190 Wise

Process industry bimetal thermometer with adjustable stem_T190

T190 Wise

Service intended

        Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter 75, 100, 125 and 150 mm
Accuracy ±2.0 % of full scale
Temperature element Coiled bimetal
Working range Maximum scale value

Standard features

Location of stem Center back with adjustable stem
Case 304SS, Adjustable on stem 90°
Cover 304SS
Window Glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 6.0, 6.4, 8.0 and 10.0 mm diameter
304SS, 316SS and 316L SS
Max. Insertion length : 2,000 mm
Zero adjustment External
Stem, process connection ¼", ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale
Window : Safety glass
Special range : 0 ~ 600 ℃

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

]]>
T239 Wise VietNam - Đồng hồ đo nhiệt độ nước Wise http://thietbicongnghiepnang.com/t239-wise-vietnam-dong-ho-do-nhiet-do-nuoc-wise 2019-02-20 23:43:20 http://thietbicongnghiepnang.com/t239-wise-vietnam-dong-ho-do-nhiet-do-nuoc-wise

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

T239 Wise VietNam - Đồng hồ đo nhiệt độ nước Wise

Readmore

Đồng hồ đo nhiệt độ T239 Wise

Euro gauge Liquid filled remote reading thermometer_T239

T239 Wise

Service intended

Liquid filled thermometer is used for measuring temperature of corrosive and non-corrosive fluid in all industries. It operates in aggressive and non-aggressive environment. Linear dials and temperature compensate line assure an accurate temperature indication at varying ambient conditions.

Nominal diameter 100 and 160 mm
Accuracy ±2.0 % of full scale
Measuring system (SAMA class ⅢB) Organic gas : 0 ~ 200 °C
Inert gas : -200 ~ 700 °C
Working range Maximum scale value

Standard features

Location of stem and mounting Bottom connection, surface, case mounting
Lower back connection, flush, case center mounting
Case 304SS
Cover 304SS
Bayonet type
Capillary Capillary : 1.6/0.2 mm, 316SS
Armored tube : 7.5/5.5 mm, 304SS
Window Tempered safety glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 8.0, 10.0 and 12.0 mm
316SS and 316L SS
Filling liquid Glycerin or silicone
Stem, process connection ⅜", ½", ¾" PT, NPT and PF
Option Special accuracy, ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

The post T239 Wise VietNam - Đồng hồ đo nhiệt độ nước Wise appeared first on thietbicongnghiepnang.com.

]]>

Đồng hồ đo nhiệt độ T239 Wise

Euro gauge Liquid filled remote reading thermometer_T239

T239 Wise

Service intended

Liquid filled thermometer is used for measuring temperature of corrosive and non-corrosive fluid in all industries. It operates in aggressive and non-aggressive environment. Linear dials and temperature compensate line assure an accurate temperature indication at varying ambient conditions.

Nominal diameter 100 and 160 mm
Accuracy ±2.0 % of full scale
Measuring system (SAMA class ⅢB) Organic gas : 0 ~ 200 °C
Inert gas : -200 ~ 700 °C
Working range Maximum scale value

Standard features

Location of stem and mounting Bottom connection, surface, case mounting
Lower back connection, flush, case center mounting
Case 304SS
Cover 304SS
Bayonet type
Capillary Capillary : 1.6/0.2 mm, 316SS
Armored tube : 7.5/5.5 mm, 304SS
Window Tempered safety glass
Dial White aluminium with black graduations
Pointer Black painted aluminium alloy
Stem 8.0, 10.0 and 12.0 mm
316SS and 316L SS
Filling liquid Glycerin or silicone
Stem, process connection ⅜", ½", ¾" PT, NPT and PF
Option Special accuracy, ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

]]>
T263 Wise VietNam - Đồng hồ đo nhiệt độ Wise http://thietbicongnghiepnang.com/t263-wise-vietnam-dong-ho-do-nhiet-do-wise 2019-02-20 23:37:14 http://thietbicongnghiepnang.com/t263-wise-vietnam-dong-ho-do-nhiet-do-wise

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

T263 Wise VietNam - Đồng hồ đo nhiệt độ Wise

Readmore

Đồng hồ đo nhiệt độ T263 Wise

Heavy duty service remote reading thermometer_T263

T263 Wise

Service intended

This thermometer is designed to withstand the shock and vibration inherent in heavy duty services.

Nominal diameter 80 mm
Accuracy ±1.5 % of full scale
Measuring system (SAMA class ⅢB) Organic gas : 0 ~ 200 °C
Working range Maximum scale value

Standard features

Location of stem and mounting Certer back connection, flush, cover mounting
Case and cover Black finished bronze
Capillary Capillary : 1.6/0.2 mm, 316SS
Armored tube : 7.5/5.5 mm, 304SS
Window Laminated safety glass
Dial White aluminium with black graduations
Movement Stainless steel
Damper vibration and pulsation
Pointer Black painted aluminium alloy
Stem 8.0, 10.0 and 12.0 mm
316SS and 316L SS
Zero adjustment Internal
Stem, process connection ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

The post T263 Wise VietNam - Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

]]>

Đồng hồ đo nhiệt độ T263 Wise

Heavy duty service remote reading thermometer_T263

T263 Wise

Service intended

This thermometer is designed to withstand the shock and vibration inherent in heavy duty services.

Nominal diameter 80 mm
Accuracy ±1.5 % of full scale
Measuring system (SAMA class ⅢB) Organic gas : 0 ~ 200 °C
Working range Maximum scale value

Standard features

Location of stem and mounting Certer back connection, flush, cover mounting
Case and cover Black finished bronze
Capillary Capillary : 1.6/0.2 mm, 316SS
Armored tube : 7.5/5.5 mm, 304SS
Window Laminated safety glass
Dial White aluminium with black graduations
Movement Stainless steel
Damper vibration and pulsation
Pointer Black painted aluminium alloy
Stem 8.0, 10.0 and 12.0 mm
316SS and 316L SS
Zero adjustment Internal
Stem, process connection ⅜", ½", ¾" PT, NPT and PF
Option ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise: 

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise  - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

]]>
P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise http://thietbicongnghiepnang.com/p252-wise-vietnam-dong-ho-do-ap-suat-p252-wise 2019-02-20 15:15:58 http://thietbicongnghiepnang.com/p252-wise-vietnam-dong-ho-do-ap-suat-p252-wise

Đại lý phân phối đồng hồ đo áp suất, đồng hồ đo áp lực của hãng Wise tại Việt Nam

Đồng hồ áp suất Wise P252

P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise
Readmore

Công Ty Tăng Minh Phát - Đại lý Wise Control chính hãng tại Việt Nam | Wise Vietnam

1. P252 Wise | Pressure Gauge

Euro gauge Industrial service pressure gauge - P252 Wise Việt Nam

P252 series are suitable for a corrosive environment. Typical application includes: Chemical, petro-chemical, refining process, power generation, marine and foods industry. Its stainless case and cover have a good appearance and the excellent proof against corrosive and chemical attack.

Đồng hồ áp suất P252 Wise phù hợp để sử dụng trong môi trường ăn mòn, môi trường độc hại, nhiều bụi bẩn. P252 Wise loại có dầu ,tác dụng chống sốc, chịu nhiệt, có độ ổn định và độ chính xác cao.

Đồng hồ đo áp suất có dầu P252 Wise , Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc, Đồng hồ đo áp suất chân không, P252 Wise VietNam 

 Hướng dẫn cách chọn đồng hồ đo áp suất Wise

Đồng hồ áp suất Wise P252

2. Cách chọn đồng hồ áp suất P252 Wise

P252 : INDUSTRIAL SERVICE PRESSURE GAUGE

1. NOMINAL DIAMETER
    2  : 63mm
    3  : 80mm
    4  : 100mm
    6  : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
    A : Bottom Connection, Direct
    B : Bottom Connection, Surface, Case Mounting Plate
    F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
    J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm                                                              N: Lower back Connection, Flush, Cover Mounting Plate
    V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm                                                        W : Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
     3    : 1.0 Per DIN16 005, Not available with diameter 63 & 80mm
     4    : 1.6 Per DIN16 005, Only available with diameter 63 & 80mm
4. CONNECTION
     C : 1/4”, Only available with diameter 63mm                                                                                                                                             D : 3/8”, Not available with diameter 63mm
      E : 1/2”, Not available with diameter 63 & 80mm
5. CONNECTION TYPE
     B : PF C: PT D: NPT
     F : BSPT G: BSP
     Z : Other
6. UNIT
    B : kgf/cm2                                                                                                                                                                                                  H : bar
7. RANGE
    Refer to Pressure Range Table Below
8. PRESSURE CONNECTION MAT’L & DIALS
    3 : 316SS & 2 Colors
    7 : 316SS & 3 Colors, Available with Compound and Vacuum Gauges
    Z : MONEL
9. OPTIONS
     0    : None
     1    : Accessories

Example : P2524A3EDG026700, P2522A4CDI044300, P2524A3EDB04730, P2524N3EDI05630, P2524A3EGH047300, P2524A3EGH143300, P2522F4CCB047300, P2524A3EDB04330, P2524A3EDB04530, P2524A3EDB05430, P2524A3EDB028300
P2524A3EDB041300, P2524A3EDB043300, P2524A3EDB044300, P2524A3EDB045300, P2524A3EDB050300, P2524A3EDB051300, P2524A3EDB054300

Thang đo đồng hồ đo áp suất P252 Wise

SCALE (bar) 63mm 80mm 100mm 160mm ORDERCODE
VACUUM GAUGE -1~0 026
PRESSURE GAUGE 0~1 041
0~1.6 133
0~2.5 134
0~4 044
0~6 045
0~10 047
0~16 143
0~25 052
0~40 151
0~60 056
0~100 058
0~160 060
0~250 062
0~400 065
0~600 067
0~1000 070
0~1600 × × 074
COMPOUN DGAUGE -1~1.5 007
-1~3 029
-1~5 010
-1~9 014
-1~15 033

3. Một số model P252 thường dùng

Đồng hồ đo áp suất P252 Wise - P252 Wise Việt Nam

P2524A3EDB04730

P2524A3EDH04730

P2524A3EDIH04730

P2524A3EDB02630

P2524A3EDH02630

P2524A3EDI02630

P2524A3EDB12330

P2524A3EDH12330

P2524A3EDI12330

P2524A3EDB04130

P2524A3EDH04130

P2524A3EDI04130

P2524A3EDB13330

P2524A3EDH13330

P2524A3EDI13330

P2524A3EDB04230

P2524A3EDH04230

P2524A3EDI04230

P2524A3EDB13430

P2524A3EDH13430

P2524A3EDI13430

P2524A3EDB04530

P2524A3EDH04530

P2524A3EDI04530

P2524A3EDB05030

P2524A3EDH05030

P2524A3EDI05030

P2524A3EDB14330

P2524A3EDH14330

P2524A3EDI14330

P2524A3EDB05130

P2524A3EDH05130

P2524A3EDI05130

P2524A3EDB05230

P2524A3EDH05230

P2524A3EDI05230

P2524A3EDB05430

P2524A3EDH05430

P2524A3EDI05430

P2524A3EDB05530

P2524A3EDH05530

P2524A3EDI05530

P2524A3EDB05830

P2524A3EDH05830

P2524A3EDI05830

P2524A3EDB06630

P2524A3EDH06630

P2524A3EDI06630

P2524A3EDB2730

P2524A3EDH2730

P2524A3EDI2730

P2524A3DDB04730

P2524A3DDH04730

P2524A3DDIH04730

P2524A3DDB02630

P2524A3DDH02630

P2524A3DDI02630

P2524A3DDB12330

P2524A3DDH12330

P2524A3DDI12330

P2524A3DDB04130

P2524A3DDH04130

P2524A3DDI04130

P2524A3DDB13330

P2524A3DDH13330

P2524A3DDI13330

P2524A3DDB04230

P2524A3DDH04230

P2524A3DDI04230

P2524A3DDB13430

P2524A3DDH13430

P2524A3DDI13430

P2524A3DDB04530

P2524A3DDH04530

P2524A3DDI04530

P2524A3DDB05030

P2524A3DDH05030

P2524A3DDI05030

P2524A3DDB14330

P2524A3DDH14330

P2524A3DDI14330

P2524A3DDB05130

P2524A3DDH05130

P2524A3DDI05130

P2524A3DDB05230

P2524A3DDH05230

P2524A3DDI05230

P2524A3DDB05430

P2524A3DDH05430

P2524A3DDI05430

P2524A3DDB05530

P2524A3DDH05530

P2524A3DDI05530

P2524A3DDB05830

P2524A3DDH05830

P2524A3DDI05830

P2524A3DDB06630

P2524A3DDH06630

P2524A3DDI06630

P2524A3DDB2730

P2524A3DDH2730

P2524A3DDI2730

P252 hàng có sẵn tại kho TMP

P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise

Các thiết bị khác của hãng Wise Control : Đồng hồ đo nhiệt độ Wise, đồng hồ đo lưu lượng Wise, đầu dò nhiệt độ Wise,  P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise appeared first on thietbicongnghiepnang.com.

]]>

Công Ty Tăng Minh Phát - Đại lý Wise Control chính hãng tại Việt Nam | Wise Vietnam

1. P252 Wise | Pressure Gauge

Euro gauge Industrial service pressure gauge - P252 Wise Việt Nam

P252 series are suitable for a corrosive environment. Typical application includes: Chemical, petro-chemical, refining process, power generation, marine and foods industry. Its stainless case and cover have a good appearance and the excellent proof against corrosive and chemical attack.

Đồng hồ áp suất P252 Wise phù hợp để sử dụng trong môi trường ăn mòn, môi trường độc hại, nhiều bụi bẩn. P252 Wise loại có dầu ,tác dụng chống sốc, chịu nhiệt, có độ ổn định và độ chính xác cao.

Đồng hồ đo áp suất có dầu P252 Wise , Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc, Đồng hồ đo áp suất chân không, P252 Wise VietNam 

 Hướng dẫn cách chọn đồng hồ đo áp suất Wise

Đồng hồ áp suất Wise P252

2. Cách chọn đồng hồ áp suất P252 Wise

P252 : INDUSTRIAL SERVICE PRESSURE GAUGE

1. NOMINAL DIAMETER
    2  : 63mm
    3  : 80mm
    4  : 100mm
    6  : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
    A : Bottom Connection, Direct
    B : Bottom Connection, Surface, Case Mounting Plate
    F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
    J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm                                                              N: Lower back Connection, Flush, Cover Mounting Plate
    V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm                                                        W : Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
     3    : 1.0 Per DIN16 005, Not available with diameter 63 & 80mm
     4    : 1.6 Per DIN16 005, Only available with diameter 63 & 80mm
4. CONNECTION
     C : 1/4”, Only available with diameter 63mm                                                                                                                                             D : 3/8”, Not available with diameter 63mm
      E : 1/2”, Not available with diameter 63 & 80mm
5. CONNECTION TYPE
     B : PF C: PT D: NPT
     F : BSPT G: BSP
     Z : Other
6. UNIT
    B : kgf/cm2                                                                                                                                                                                                  H : bar
7. RANGE
    Refer to Pressure Range Table Below
8. PRESSURE CONNECTION MAT’L & DIALS
    3 : 316SS & 2 Colors
    7 : 316SS & 3 Colors, Available with Compound and Vacuum Gauges
    Z : MONEL
9. OPTIONS
     0    : None
     1    : Accessories

Example : P2524A3EDG026700, P2522A4CDI044300, P2524A3EDB04730, P2524N3EDI05630, P2524A3EGH047300, P2524A3EGH143300, P2522F4CCB047300, P2524A3EDB04330, P2524A3EDB04530, P2524A3EDB05430, P2524A3EDB028300
P2524A3EDB041300, P2524A3EDB043300, P2524A3EDB044300, P2524A3EDB045300, P2524A3EDB050300, P2524A3EDB051300, P2524A3EDB054300

Thang đo đồng hồ đo áp suất P252 Wise

SCALE (bar) 63mm 80mm 100mm 160mm ORDERCODE
VACUUM GAUGE -1~0 026
PRESSURE GAUGE 0~1 041
0~1.6 133
0~2.5 134
0~4 044
0~6 045
0~10 047
0~16 143
0~25 052
0~40 151
0~60 056
0~100 058
0~160 060
0~250 062
0~400 065
0~600 067
0~1000 070
0~1600 × × 074
COMPOUN DGAUGE -1~1.5 007
-1~3 029
-1~5 010
-1~9 014
-1~15 033

3. Một số model P252 thường dùng

Đồng hồ đo áp suất P252 Wise - P252 Wise Việt Nam

P2524A3EDB04730

P2524A3EDH04730

P2524A3EDIH04730

P2524A3EDB02630

P2524A3EDH02630

P2524A3EDI02630

P2524A3EDB12330

P2524A3EDH12330

P2524A3EDI12330

P2524A3EDB04130

P2524A3EDH04130

P2524A3EDI04130

P2524A3EDB13330

P2524A3EDH13330

P2524A3EDI13330

P2524A3EDB04230

P2524A3EDH04230

P2524A3EDI04230

P2524A3EDB13430

P2524A3EDH13430

P2524A3EDI13430

P2524A3EDB04530

P2524A3EDH04530

P2524A3EDI04530

P2524A3EDB05030

P2524A3EDH05030

P2524A3EDI05030

P2524A3EDB14330

P2524A3EDH14330

P2524A3EDI14330

P2524A3EDB05130

P2524A3EDH05130

P2524A3EDI05130

P2524A3EDB05230

P2524A3EDH05230

P2524A3EDI05230

P2524A3EDB05430

P2524A3EDH05430

P2524A3EDI05430

P2524A3EDB05530

P2524A3EDH05530

P2524A3EDI05530

P2524A3EDB05830

P2524A3EDH05830

P2524A3EDI05830

P2524A3EDB06630

P2524A3EDH06630

P2524A3EDI06630

P2524A3EDB2730

P2524A3EDH2730

P2524A3EDI2730

P2524A3DDB04730

P2524A3DDH04730

P2524A3DDIH04730

P2524A3DDB02630

P2524A3DDH02630

P2524A3DDI02630

P2524A3DDB12330

P2524A3DDH12330

P2524A3DDI12330

P2524A3DDB04130

P2524A3DDH04130

P2524A3DDI04130

P2524A3DDB13330

P2524A3DDH13330

P2524A3DDI13330

P2524A3DDB04230

P2524A3DDH04230

P2524A3DDI04230

P2524A3DDB13430

P2524A3DDH13430

P2524A3DDI13430

P2524A3DDB04530

P2524A3DDH04530

P2524A3DDI04530

P2524A3DDB05030

P2524A3DDH05030

P2524A3DDI05030

P2524A3DDB14330

P2524A3DDH14330

P2524A3DDI14330

P2524A3DDB05130

P2524A3DDH05130

P2524A3DDI05130

P2524A3DDB05230

P2524A3DDH05230

P2524A3DDI05230

P2524A3DDB05430

P2524A3DDH05430

P2524A3DDI05430

P2524A3DDB05530

P2524A3DDH05530

P2524A3DDI05530

P2524A3DDB05830

P2524A3DDH05830

P2524A3DDI05830

P2524A3DDB06630

P2524A3DDH06630

P2524A3DDI06630

P2524A3DDB2730

P2524A3DDH2730

P2524A3DDI2730

P252 hàng có sẵn tại kho TMP

P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise

Các thiết bị khác của hãng Wise Control : Đồng hồ đo nhiệt độ Wise, đồng hồ đo lưu lượng Wise, đầu dò nhiệt độ Wise,  P258 Wise, P255 Wise, P253 Wise, P110 Wise

]]>
P258 Wise Vietnam - Đồng hồ đo áp suất nước P258 Wise http://thietbicongnghiepnang.com/p258-wise-vietnam-dong-ho-do-ap-suat-nuoc-p258-wise 2019-02-20 14:43:50 http://thietbicongnghiepnang.com/p258-wise-vietnam-dong-ho-do-ap-suat-nuoc-p258-wise

P258 Wise control là loại đồng hồ đo áp có dầu.

P258 Wise Vietnam - Đồng hồ đo áp suất nước P258 Wise

Readmore

Công Ty Tăng Minh Phát - Đại lý Wise Control tại Việt Nam

Đồng hồ đo áp suất có dầu P258 Wise  | Đồng hồ đo áp suất thấp Wise P258

Công dụng đồng hồ đo áp suất P258 Wise : đo áp suất thấp, đo áp suất nước, đo áp suất âm

P258 Wise là loại đồng hồ áp suất có dầu, thích hợp sử dụng trong môi trường có rung động mạnh, môi trường độc hại, ô nhiễm

Euro gauge Liquid filled industrial pressure gauge_P258 series

P258 Wise Vietnam are suitable for corrosive environments. Typical application includes : Chemical, petro-chemical, refining process, power generation, marine and food industry. The filled liquid absorbs vibration and pulsation.

Đồng hồ đo áp suất P258 Wise

Đường kính mặt :  63, 80, 100 and 160 mm
Độ chính xác  : P2582 (63 mm) and P2583 (80 mm) : ±1.6 %
                     P2584 (100 mm) and P2586 (160 mm) : ±0.5 %
Vật liệu Vỏ :  Inox 304, 316SS
Thang đo  (MPa, kPa, bar) :     63 and 80 mm : 0.1 ~ 0 to 0 ~ 100 MPa
                                       100 and 160 mm : 0.1 ~ 0 to 0 ~ 200 MPa
Kết nối : chân đứng,  chân sau
Kiểu ren :  63 mm : ⅛", ¼" PT, NPT and PF
              80 mm : ¼", ⅜" PT, NPT and PF
              100 and 160 mm : ¼", ⅜", ½" PT, NPT and PF

* CÁCH CHỌN ĐỒNG HỒ ĐO ÁP P282 WISE

P258 : LIQUID FILLED INDUSTRIAL PRESSURE GAUGE

1. NOMINAL DIAMETER
    2  : 63mm
    3  : 80mm
    4  : 100mm
    6  : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
    A : Bottom Connection, Direct
    B : Bottom Connection, Surface, Case Mounting Plate
    F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
    H: Center back Connection, Flush, Case Center Mounting Plate, Only available with diameter 63mm                                                           I : Center back Connection, Flush, Case Center Mounting Plate, with Bracket
          Only available with diameter 63mm
     J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm     L : Lower back Connection, Flush, Case Center Mounting Plate
    M: Lower back Connection, Flush, Case Center Mounting Bracket
    N: Lower back Connection, Flush, Cover Mounting Plate, Not available with diameter 160mm
    V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm  W: Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
    3 : ±1.0% of Full Scale, Not available with diameter 63 & 80mm    

    4 : ±1.6% of Full Scale, Only available with diameter 63 & 80mm
4. CONNECTION
    B : 1/8”, Only available with diameter 63mm C : 1/4”
    D : 3/8”, Not available with diameter 63mm
    E : 1/2”, Not available with diameter 63 & 80mm
5. CONNECTION TYPE
    B: PF C: PT D: NPT
    F : BSPT G: BSP
    Z : Other
6.UNIT

    H : Bar

    A : Mpa

     J : Kpa

    Z : Other
7. RANGE
Refer to Pressure Unit and Range Table

8. PRESSURE CONNECTION MAT’L & DIALS
    3    316SS and 2 colors
    4    316L SS and 2 colors
    7    316SS and 3 colors
    8    316L SS and 3 colors
    Z    Monel (Only available with diameter 100 and 160 mm)
9. OPTIONS
     0    : None
     1    : Accessories
SAMPLE MODEL NUMBER : P2582A4CCI044300

Thang đo đồng hồ đo áp P258 Wise - Wise control Việt Nam

Range and code

Unit and code

Nominal diameter

H : bar

I : MPa

J : kPa

63 mm

80 mm

100 mm

160 mm

026

-1 ~ 0

-0.1 ~ 0

-100 ~ 0

O

O

O

O

123

0 ~ 0.4

0 ~ 0.04

0 ~ 40

X

X

O

Δ

040

0 ~ 0.5

0 ~ 0.05

0 ~ 50

X

X

O

Δ

041

0 ~ 1

0 ~ 0.1

0 ~ 100

O

O

O

O

133

0 ~ 1.6

0 ~ 0.16

0 ~ 160

X

X

O

O

042

0 ~ 2

0 ~ 0.2

0 ~ 200

O

O

O

O

134

0 ~ 2.5

0 ~ 0.25

0 ~ 250

X

X

O

O

043

0 ~ 3

0 ~ 0.3

0 ~ 300

O

O

O

O

044

0 ~ 4

0 ~ 0.4

0 ~ 400

O

O

O

O

045

0 ~ 6

0 ~ 0.6

0 ~ 600

O

O

O

O

047

0 ~ 10

0 ~ 1

0 ~ 1,000

O

O

O

O

050

0 ~ 15

0 ~ 1.5

X

O

O

O

O

143

0 ~ 16

0 ~ 1.6

X

O

O

O

O

051

0 ~ 20

0 ~ 2

X

O

O

O

O

052

0 ~ 25

0 ~ 2.5

X

O

O

O

O

054

0 ~ 35

0 ~ 3.5

X

O

O

O

O

151

0 ~ 40

0 ~ 4

X

O

O

O

O

055

0 ~ 50

0 ~ 5

X

O

O

O

O

056

0 ~ 60

0 ~ 6

X

O

O

O

O

057

0 ~ 70

0 ~ 7

X

O

O

O

O

058

0 ~ 100

0 ~ 10

X

O

O

O

O

059

0 ~ 150

0 ~ 15

X

O

O

O

O

060

0 ~ 160

0 ~ 16

X

O

O

O

O

062

0 ~ 250

0 ~ 25

X

O

O

O

O

064

0 ~ 350

0 ~ 35

X

O

O

O

O

065

0 ~ 400

0 ~ 40

X

O

O

O

O

066

0 ~ 500

0 ~ 50

X

O

O

O

O

067

0 ~ 600

0 ~ 60

X

O

O

O

O

068

0 ~ 700

0 ~ 70

X

O

O

O

O

070

0 ~ 1,000

0 ~ 100

X

O

O

O

O

074

0 ~ 1,600

0 ~ 160

X

X

X

O

O

075

0 ~ 2,000

0 ~ 200

X

X

X

O

O

006

-1 ~ 0.6

-0.1 ~ 0.06

-100 ~ 60

X

X

O

O

027

-1 ~ 1

-0.1 ~ 0.1

-100 ~ 100

O

O

O

O

007

-1 ~ 1.5

-0.1 ~ 0.15

-100 ~ 150

X

X

O

O

028

-1 ~ 2

-0.1 ~ 0.2

-100 ~ 200

O

O

O

O

029

-1 ~ 3

-0.1 ~ 0.3

-100 ~ 300

O

O

O

O

030

-1 ~ 4

-0.1 ~ 0.4

-100 ~ 400

O

O

O

O

010

-1 ~ 5

-0.1 ~ 0.5

-100 ~ 500

O

O

O

O

031

-1 ~ 6

-0.1 ~ 0.6

-100 ~ 600

O

O

O

O

014

-1 ~ 9

-0.1 ~ 0.9

-100 ~ 900

O

O

O

O

032

-1 ~ 10

-0.1 ~ 1

-100 ~ 1,000

O

O

O

O

033

-1 ~ 15

-0.1 ~ 1.5

-100 ~ 1.5 MPa

O

O

O

O

034

-1 ~ 20

-0.1 ~ 2

-100 ~ 2 MPa

O

O

O

O

017

-1 ~ 24

-0.1 ~ 2.4

-100 ~ 2.4 MPa

O

O

O

O

035

-1 ~ 25

-0.1 ~ 2.5

-100 ~ 2.5 MPa

O

O

O

O


 Các thiết bị khác của Wise Control : P252 Wise, P255 Wise, P253 Wise, P110 Wise

The post P258 Wise Vietnam - Đồng hồ đo áp suất nước P258 Wise appeared first on thietbicongnghiepnang.com.

]]>
Công Ty Tăng Minh Phát - Đại lý Wise Control tại Việt Nam

Đồng hồ đo áp suất có dầu P258 Wise  | Đồng hồ đo áp suất thấp Wise P258

Công dụng đồng hồ đo áp suất P258 Wise : đo áp suất thấp, đo áp suất nước, đo áp suất âm

P258 Wise là loại đồng hồ áp suất có dầu, thích hợp sử dụng trong môi trường có rung động mạnh, môi trường độc hại, ô nhiễm

Euro gauge Liquid filled industrial pressure gauge_P258 series

P258 Wise Vietnam are suitable for corrosive environments. Typical application includes : Chemical, petro-chemical, refining process, power generation, marine and food industry. The filled liquid absorbs vibration and pulsation.

Đồng hồ đo áp suất P258 Wise

Đường kính mặt :  63, 80, 100 and 160 mm
Độ chính xác  : P2582 (63 mm) and P2583 (80 mm) : ±1.6 %
                     P2584 (100 mm) and P2586 (160 mm) : ±0.5 %
Vật liệu Vỏ :  Inox 304, 316SS
Thang đo  (MPa, kPa, bar) :     63 and 80 mm : 0.1 ~ 0 to 0 ~ 100 MPa
                                       100 and 160 mm : 0.1 ~ 0 to 0 ~ 200 MPa
Kết nối : chân đứng,  chân sau
Kiểu ren :  63 mm : ⅛", ¼" PT, NPT and PF
              80 mm : ¼", ⅜" PT, NPT and PF
              100 and 160 mm : ¼", ⅜", ½" PT, NPT and PF

* CÁCH CHỌN ĐỒNG HỒ ĐO ÁP P282 WISE

P258 : LIQUID FILLED INDUSTRIAL PRESSURE GAUGE

1. NOMINAL DIAMETER
    2  : 63mm
    3  : 80mm
    4  : 100mm
    6  : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
    A : Bottom Connection, Direct
    B : Bottom Connection, Surface, Case Mounting Plate
    F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
    H: Center back Connection, Flush, Case Center Mounting Plate, Only available with diameter 63mm                                                           I : Center back Connection, Flush, Case Center Mounting Plate, with Bracket
          Only available with diameter 63mm
     J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm     L : Lower back Connection, Flush, Case Center Mounting Plate
    M: Lower back Connection, Flush, Case Center Mounting Bracket
    N: Lower back Connection, Flush, Cover Mounting Plate, Not available with diameter 160mm
    V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm  W: Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
    3 : ±1.0% of Full Scale, Not available with diameter 63 & 80mm    

    4 : ±1.6% of Full Scale, Only available with diameter 63 & 80mm
4. CONNECTION
    B : 1/8”, Only available with diameter 63mm C : 1/4”
    D : 3/8”, Not available with diameter 63mm
    E : 1/2”, Not available with diameter 63 & 80mm
5. CONNECTION TYPE
    B: PF C: PT D: NPT
    F : BSPT G: BSP
    Z : Other
6.UNIT

    H : Bar

    A : Mpa

     J : Kpa

    Z : Other
7. RANGE
Refer to Pressure Unit and Range Table

8. PRESSURE CONNECTION MAT’L & DIALS
    3    316SS and 2 colors
    4    316L SS and 2 colors
    7    316SS and 3 colors
    8    316L SS and 3 colors
    Z    Monel (Only available with diameter 100 and 160 mm)
9. OPTIONS
     0    : None
     1    : Accessories
SAMPLE MODEL NUMBER : P2582A4CCI044300

Thang đo đồng hồ đo áp P258 Wise - Wise control Việt Nam

Range and code

Unit and code

Nominal diameter

H : bar

I : MPa

J : kPa

63 mm

80 mm

100 mm

160 mm

026

-1 ~ 0

-0.1 ~ 0

-100 ~ 0

O

O

O

O

123

0 ~ 0.4

0 ~ 0.04

0 ~ 40

X

X

O

Δ

040

0 ~ 0.5

0 ~ 0.05

0 ~ 50

X

X

O

Δ

041

0 ~ 1

0 ~ 0.1

0 ~ 100

O

O

O

O

133

0 ~ 1.6

0 ~ 0.16

0 ~ 160

X

X

O

O

042

0 ~ 2

0 ~ 0.2

0 ~ 200

O

O

O

O

134

0 ~ 2.5

0 ~ 0.25

0 ~ 250

X

X

O

O

043

0 ~ 3

0 ~ 0.3

0 ~ 300

O

O

O

O

044

0 ~ 4

0 ~ 0.4

0 ~ 400

O

O

O

O

045

0 ~ 6

0 ~ 0.6

0 ~ 600

O

O

O

O

047

0 ~ 10

0 ~ 1

0 ~ 1,000

O

O

O

O

050

0 ~ 15

0 ~ 1.5

X

O

O

O

O

143

0 ~ 16

0 ~ 1.6

X

O

O

O

O

051

0 ~ 20

0 ~ 2

X

O

O

O

O

052

0 ~ 25

0 ~ 2.5

X

O

O

O

O

054

0 ~ 35

0 ~ 3.5

X

O

O

O

O

151

0 ~ 40

0 ~ 4

X

O

O

O

O

055

0 ~ 50

0 ~ 5

X

O

O

O

O

056

0 ~ 60

0 ~ 6

X

O

O

O

O

057

0 ~ 70

0 ~ 7

X

O

O

O

O

058

0 ~ 100

0 ~ 10

X

O

O

O

O

059

0 ~ 150

0 ~ 15

X

O

O

O

O

060

0 ~ 160

0 ~ 16

X

O

O

O

O

062

0 ~ 250

0 ~ 25

X

O

O

O

O

064

0 ~ 350

0 ~ 35

X

O

O

O

O

065

0 ~ 400

0 ~ 40

X

O

O

O

O

066

0 ~ 500

0 ~ 50

X

O

O

O

O

067

0 ~ 600

0 ~ 60

X

O

O

O

O

068

0 ~ 700

0 ~ 70

X

O

O

O

O

070

0 ~ 1,000

0 ~ 100

X

O

O

O

O

074

0 ~ 1,600

0 ~ 160

X

X

X

O

O

075

0 ~ 2,000

0 ~ 200

X

X

X

O

O

006

-1 ~ 0.6

-0.1 ~ 0.06

-100 ~ 60

X

X

O

O

027

-1 ~ 1

-0.1 ~ 0.1

-100 ~ 100

O

O

O

O

007

-1 ~ 1.5

-0.1 ~ 0.15

-100 ~ 150

X

X

O

O

028

-1 ~ 2

-0.1 ~ 0.2

-100 ~ 200

O

O

O

O

029

-1 ~ 3

-0.1 ~ 0.3

-100 ~ 300

O

O

O

O

030

-1 ~ 4

-0.1 ~ 0.4

-100 ~ 400

O

O

O

O

010

-1 ~ 5

-0.1 ~ 0.5

-100 ~ 500

O

O

O

O

031

-1 ~ 6

-0.1 ~ 0.6

-100 ~ 600

O

O

O

O

014

-1 ~ 9

-0.1 ~ 0.9

-100 ~ 900

O

O

O

O

032

-1 ~ 10

-0.1 ~ 1

-100 ~ 1,000

O

O

O

O

033

-1 ~ 15

-0.1 ~ 1.5

-100 ~ 1.5 MPa

O

O

O

O

034

-1 ~ 20

-0.1 ~ 2

-100 ~ 2 MPa

O

O

O

O

017

-1 ~ 24

-0.1 ~ 2.4

-100 ~ 2.4 MPa

O

O

O

O

035

-1 ~ 25

-0.1 ~ 2.5

-100 ~ 2.5 MPa

O

O

O

O


 Các thiết bị khác của Wise Control : P252 Wise, P255 Wise, P253 Wise, P110 Wise

]]>
Anh Hoàng http://thietbicongnghiepnang.com/anh-hung-ailes 2018-11-01 07:54:49 http://thietbicongnghiepnang.com/anh-hung-ailes Chủ thương hiệu thời trang nổi tiếng Ailes Readmore

"Thiết kế hoàn hảo, thi công chất lượng, giá cả hợp lí" là tất cả những từ tôi dùng khi nói về các dịch vụ thiết kế và thi công nội thất shop của Xưởng mộc số 1 sau khi hoàn thiện các chuổi cửa hàng thời trang của tôi.

The post Anh Hoàng appeared first on thietbicongnghiepnang.com.

]]>
"Thiết kế hoàn hảo, thi công chất lượng, giá cả hợp lí" là tất cả những từ tôi dùng khi nói về các dịch vụ thiết kế và thi công nội thất shop của Xưởng mộc số 1 sau khi hoàn thiện các chuổi cửa hàng thời trang của tôi.

]]>
Anh Tân http://thietbicongnghiepnang.com/anh-tan 2018-11-01 08:00:42 http://thietbicongnghiepnang.com/anh-tan Chủ căn hộ chung cư Cộng hòa Garden, Tân Bình Readmore

Sự chuyên nghiệp của công ty làm tôi rất hài lòng. Phải nói là tôi đã có được một ngôi nhà tuyệt vời. Công trình làm xong bạn bè hàng xóm ai cũng khen. Mong rằng công ty sẽ ngày càng phát triển hơn nữa.

The post Anh Tân appeared first on thietbicongnghiepnang.com.

]]>
Sự chuyên nghiệp của công ty làm tôi rất hài lòng. Phải nói là tôi đã có được một ngôi nhà tuyệt vời. Công trình làm xong bạn bè hàng xóm ai cũng khen. Mong rằng công ty sẽ ngày càng phát triển hơn nữa.

]]>
Anh Phú http://thietbicongnghiepnang.com/anh-phu 2018-11-01 08:01:12 http://thietbicongnghiepnang.com/anh-phu Chủ căn hộ chung cư Hà Đô Centrosa Garden, quận 10 Readmore

Gia đình tôi hoàn toàn hài lòng với quyết định lựa chọn Xưởng mộc số 1 là đơn vị thiết kế và thi công nội thất. Dịch vụ của công ty tốt, thiết kế đẹp và chi phí rất hợp lý, kiến trúc sư nhiệt tình.

The post Anh Phú appeared first on thietbicongnghiepnang.com.

]]>
Gia đình tôi hoàn toàn hài lòng với quyết định lựa chọn Xưởng mộc số 1 là đơn vị thiết kế và thi công nội thất. Dịch vụ của công ty tốt, thiết kế đẹp và chi phí rất hợp lý, kiến trúc sư nhiệt tình.

]]>