Đại lý phân phối CS Instruments tại Việt Nam

CS INSTRUMENTS VIETNAM

Cs Instruments được thành lập năm 2002 có trụ đặt tại Đức, chuyên cung cấp thiết bị đo lưu lượng nước, khí, cảm biến lưu lượng, cảm biến áp suất ...

Product CS Intruments

Đại lý phân phối CS Instruments tại Việt Nam

Dew Point

Đại lý phân phối CS Instruments tại Việt Nam

Flow Meter

Đại lý phân phối CS Instruments tại Việt Nam

Leak Detection

Đại lý phân phối CS Instruments tại Việt Nam

Compressed Air

Đại lý phân phối CS Instruments tại Việt Nam

Pressure Sensors

Đại lý phân phối CS Instruments tại Việt Nam

Chart Recorder

Đại lý phân phối CS Instruments tại Việt Nam

Software

Đại lý phân phối CS Instruments tại Việt Nam

Power Meter

1. Đo lưu lượng khí điểm sương CS InstrumentDEW POINT)

a. Thiết bị đo điểm sương dùng cho máy nén khí của hãng CS Instruments

FA 550 CS INSTRUMENTS - Cảm biến điểm sương

  • Vỏ được làm bằng nhôm đúc

  • Cảm biến điểm sương FA550 dùng trong môi trường ngoài trời và môi trường khắc nghiệt

DP 400 mobile - Máy đo độ động sương di động

  • Mobile Dew Point Measurement with Pressure Sensor

  • Mobile dew point measurement system to measure dew point and other pressure dependent values.

Product Sensor input 1+2 Sensor input 3+4
DS 400 mobile - mobile chart recorder with graphic display and touch screen Digital  ---------- 0500 4012 D
Digital Digital 0500 4012 DD
Digital Analogue 0500 4012 DA
Analogue  ---------- 0500 4012 A
Analogue Analogue 0500 4012 AA
Options:  
Integrated Ethernet- and RS 485 interface Z500 4004
Integrated webserver Z500 4005
"Mathematics calculation function" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication
Z500 4007
"Totalizer function for analogue signals" Z500 4006
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
Further Accessories:  
CS Soft Basic - data evaluation in graphic and table form,
reading out of the measured data via USB or Ethernet
0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations 0554 7050
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer 0554 7045
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m 0553 1503
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m 0553 0503
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m 0553 0501
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m 0553 0502
Extension cable for mobile instruments,ODU / ODU, 10 m 0553 0504
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m 0553 0506
Case for all sensors (Dimensions: 500 x 360 x 120 mm) 0554 6006

DP 510 CS Instruments | Máy đo điểm sương cầm tay

  • Portable dew point meter with third-party sensor

  • Disposes all functions of our DP 500 and comes with an additional - freely assignable - sensor input.

DS 400 Set CS Instruments

  • Stationary dew point measurement in compressed air systems

  • Ideal for the monitoring of refrigeration or adsorption dryers.

FA 500 CS Instruments | Cảm biến điểm sương

  • Dew point sensor with integrated display and alarm relay
  • Ideal instrument for dew point measuring for all kinds of dryers.

FA 510/515 -Dew point sensor for adsorption dryers

  • For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. 
  • New: with Modbus-RTU interface.

Dew point sensor FA 515 Ex

  • To measure the (pressure) dew point point in potentially explosive atmospheres.
  • Can be used in many non-aggressive gases.

Dew point measurement DS 52-set for desiccant dryers

  • Bộ điều khiển DS 52 thường đi kèm cảm biến điểm sương FA 510
  • Thang đo : -80 - 20*Ctd

FA 505 CS Instruments

  • Dew point sensor for OEM applications
  • Extremely long-term stable dew point sensor for adsorption dryers

DP 500 - Portable dew point meter with integrated data logger

  • Portable service instrument for dew point measurement for all types of dryers down to -80°Ctd dew point.

FA 510/515 - Dew point sensor for refrigeration dryers

  • Dew point measurement from -20 to 50°Ctd. 
  • New: with Modbus-RTU interface.

Dew point sensor FA 410 for monitoring of membrane and adsorption dryers

  • from -80 to 20°Ctd. Extremely long-term stable
  • Analogue output 4...20 mA.

Dew point measurement DS 52-set for adsorption dryers.

  • The measuring range of -80...20°Ctd makes
  • DS 52-set with alarm the ideal dew point monitor with analogue output 4...20 mA.

Dew point transmitter FA 415 for the monitoring of refrigeration dryers

  • from -20 to 50°Ctd. Extremely long-term stable
  •  Analogue output 4...20 mA.

Dew point measurement with DS 52-set for refrigeration dryers

  • The measuring range of -20...50°Ctd makes
  • The dew ponit set DS 52 with alarm the ideal dew point monitor with analogue output 4...20 mA.

FA 400 | Dew point sensor with integrated display and alarm relay

2. Thiết bị đo lưu lượng CS Instruments | FLOW METER

Đồng hồ đo lưu lượng CS Instrument

Proven flow meters and flow measurement devices for compressed air and gas

a. VA 525 - Cảm biến lưu lượng CS Instruments

The VA 525 is the ideal device to ensure energy monitoring in systems with many compressed air consumers.

Flow Meter with ATEX Approval - VA550

b. VA 550 CS Instrument - Đồng hồ đo lưu lượng khí gas CS Instrument

Flow meter for heavy duty industrial applications

Our extra robust flow meter is available as ATEX-version for application in explosive areas

Flow Meter with Measuring Section - VA 570

VA 550 Flow sensor Order no.
VA 550 Flow sensor, measuring head in robust aluminium die cast housing 0695 0550
Measuring range: Bestell-Code
A1 - Standard version (92,7 m/s) A1
A2 - Max version (185 m/s) A2
A3 - High-Speed version (224 m/s) A3
Screw-in thread:  
B1 - G 1/2" outer thread B1
B2 - NPT 1/2" outer thread B2
B3 - PT 1/2" outer thread B3
Mounting length / shaft length:  
C1 - 220 mm C1
C2 - 300 mm C2
C3 - 400 mm C3
C4 - 500 mm C4
C5 - 600 mm C5
C7 - 160 mm C7
Option display:  
D1 - with integrated display D1
D2 - without display D2
Option signal outputs / bus connection:  
E1 - 2x4...20mA a. output,galv.isolated,pulse output RS485 Modbus-RTU E1
E4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) E4
E5 - Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E5
E7 - 2x4..20mA analogue output passive,pulse output RS485 (Mb-RTU) E7
E8 - M-Bus (Z6955504) E8
E9 -  Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) E9
Calibration:  
F1 - no real gas calibration - gas adjustment via gas constant F1
F2 - real gas calibration in the gas type as selected below F2
Gas type:  
G1 - Compressed air G1
G2 - Nitrogen (N2) G2
G3 - Argon (Ar) G3
G4 - Carbon dioxide (CO2) G4
G5 - Oxygen (O2) G5
G6 - Nitrous Oxide (N2O) G6
G7 - Natural gas (NG) G7
G8 - Helium (He) - Real gas calibration required  G8
G9 - Propane (C3H8) - Real gas calibration required  G9
G10 - Methane (CH4) G10
G11 - Biogas (Methane 50% : CO2 50%) G11
G12 - Hydrogen (H2) - Real gas calibration required  G12
G90 -Further gas G90
G91 - Gas mixture G91

c. VA 570 - Đồng hồ đo lưu lượng dạng Thermal mass

The measuring sections are available in flanged version or with R resp. NPT thread.

Flow Meter with Modbus Interface - VA 500

VA 570 - Flow sensor with integrated measuring section Order no.
VA 570 Flow sensor with integrated 1/2" measuring section 0695 0570
VA 570 Flow sensor with integrated 3/4" measuring section 0695 0571
VA 570 Flow sensor with integrated 1" measuring section 0695 0572
VA 570 Flow sensor with integrated 1 1/4" measuring section 0695 0573
VA 570 Flow sensor with integrated 1 1/2" measuring section 0695 0574
VA 570 Flow sensor with integrated 2" measuring section 0695 0575
VA 570 Flow sensor with integrated DN 15 measuring section with weld neck flange 0695 2570
VA 570 Flow sensor with integrated DN 20 measuring section with weld neck flange 0695 2571
VA 570 Flow sensor with integrated DN 25 measuring section with weld neck flange 0695 2572
VA 570 Flow sensor with integrated DN 32 measuring section with weld neck flange 0695 2573
VA 570 Flow sensor with integrated DN 40 measuring section with weld neck flange 0695 2574
VA 570 Flow sensor with integrated DN 50 measuring section with weld neck flange 0695 2575
VA 570 Flow sensor with integrated DN 65 measuring section with weld neck flange 0695 2576
VA 570 Flow sensor with integrated DN 80 measuring section with weld neck flange 0695 2577
Outer thread measuring section: Bestell-Code
A2 - NPT outer thread A2
Option display:  
B1 - with integrated display B1
B2 - without display B2
Option signal outputs / bus connection:  
C1 - 2x4...20mA analogue output galv. isolated, pulse output RS485 C1
C4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) C4
C5 -  Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C5
C7 - 2x4..20mA analogue output passive, pulse outp.RS485 (Mb-RTU) C7
C8 - E8 - M-Bus (Z6955504) C8
C9 - Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) C9
Calibration:  
D1 - no real gas calibration - gas adjustment via gas constant D1
D2 - real gas calibration in the selected gas type D2
Gas type:  
E1 - compressed air E1
E2 - Nitrogen (N2) E2
E3 - Argon (Ar) E3
E4 - Carbon dioxide (CO2) E4
E5 - Oxygen (O2) E5
E6 - Nitrous oxide (N2O) E6
E7 - Natural gas (NG) E7
E8 - Helium (He) - Real gas calibration required  E8
E9 - Propan (C3H8) - Real gas calibration required  E9
E10 - Methane (CH4) E10
E11 - Biogas (Methane 50% : CO2 50%) E11
E12 - Hydrogen (H2) - Real gas calibration required E12
E90 - Further gas E90
E91 - Gas mixture E91

d. VA 500 - Flow sensor for compressed air and gases

RS 485 interface, Modbus RTU, 4...20 mA analogue output for m³/h, Pulse output for m³.

Mass Flow Meter - VA 520

VA 500 - Flow sensor for compressed air and gases Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU) with analogue output 4...20mA and pulse output (galvanically separated), standard version (92,7 m/s) 0695 5001
Measuring range:
Max-version (185m/s) Z695 5003
High-Speed-Version (224 m/s) Z695 5002
Option display:
with integrated display Z695 5000
without display
Option signal output / bus connection:
Standard
Ethernet-Interface for VA500/VA520, FA500 Z695 5006
Ethernet-Interface PoE for VA500/VA520, FA500 Z695 5007
M-Bus (pulse output not available) Z695 5004
Mounting length / shaft length:
220 mm ZSL0220
120 mm ZSL0120
160 mm ZSL0160
300 mm ZSL0300
400 mm ZSL0400
500 mm ZSL0500
600 mm ZSL0600
700 mm ZSL0700
Surface condition:
Special cleaning - oil and grease free (e.g. for oxygen) 0699 4005
LABS free and silicone free version incl.cleaning oil and grease free 0699 4007

e. VA 520 - Flowmeter with integrated measuring section

Flow meter with newly developed evaluation electronics to record all measured values digitally.

M-Bus flow meters for compressed air, natural and industrial gas

Máy đo lưu lượng khí cầm tay CS Instruments

a. M-Bus - Industrial gas meter

State-of-the-art industrial gas meter with M-Bus for compressed air, natural gas, biogas and many other applications.

Portable flow measurement device - PI 500

b. PI 500 for e.g. portable flow measurement

The PI 500 is an all-purpose hand-held measuring instrument for many applications in the industry.

Mass flow measurement device - DS 400

c. DS 400 - Flow measurement for compressed air and gases 

consisting of: Chart recorder DS 400 and flow sensor VA 500

Flow meter - VA 400

d. Flow direction switch for compressed air systems VA 409

Serves for determination of the flow direction of compressed air and gases especially in closed circular pipelines and detects smallest changes <0.1 m/s.

3. Máy phát hiện rò rỉ khí cầm tay CS Instruments

Leakage Size Air loss Energy loss Costs
Diameter (mm) 6 bar (l/s) 12 bar (l/s) 6 bar (kWh) 12 bar (kWh) 6 bar (€) 12 bar (€)
1 1.2 1.8 0.3 1.0 144 480
3 11.1 20.8 3.1 12.7 1,488 6,096
5 30.9 58.5 8.3 33.7 3,984 16,176
10 123.8 235.2 33.0 132.0 15,840 63,360

4. PRESSURE SENSORS | Cảm biến áp suất CS Instrument

Pressure monitoring in compressed air and gas systems helps to significantly reduce energy consumption. Only a few types of machines actually require compressed air with more than 6 bar overpressure. A reduction in the nominal pressure reduces both the power consumption and the leakage losses and increases the service life of the compressor. Electricity savings in the range of 6 - 8% can be achieved by a reduction of the nominal pressure by only 1 bar.

The smaller the pressure drop across the filter, the less high the nominal pressure must be set. If the pressure drop across the filters is greater than 0.3 bar, the filters should be replaced. Our proven differential pressure sensors and pressure gauges are ideal to monitor those figures continuously.

Differential pressure probe to test filter performance

This affordable differential pressure probe ensures the effectiveness of compressed air filter systems by measuring the differential pressure across the filter element (measurement of filter contamination).

  • Standard pressure sensor CS 10 and CS 16 for measurements from 0...10 and 0...16 bar with accuracy of full scale max. 1% or max. 0,5%.
  • Standard pressure sensor CS 40 for measurements from 0...40 bar with accuracy of full scale max. 1% or max. 0,5%.
  • Standard pressure sensor CS 1.6 absolute for measurements from 0...1.6 bar absolute with accuracy of full scale max. 0,5%.
  • Standard pressure sensor CS 100 for measurements from 0...100 bar with accuracy of full scale max. 0,5 %.
  • Standard pressure sensor CS 250 for measurements from 0...250 bar with accuracy of full scale max. 0,5 %.
  • Standard pressure sensor CS 400 for measurements from 0...400 bar with accuracy of full scale max. 0,5 %.
  • Precision pressure sensor CS -1...+15 for measurements from -1...+15 bar with accuracy of full scale max. 0,5%.

Ngoài ra, Tăng Minh Phát còn cung cấp giải pháp và thiết bị điều khiển dòng chảy của 1 số hãng khác như : Riels( Italia), Tek-trol(USA)Kometer ( Hàn Quốc), Kawaki ( Nhật Bản), Autrol ( Hàn Quốc) 

>>>Quay lại mục lục

Đại lý phân phối CS Instruments tại Việt Nam


Danh mục sản phẩm
Thống kê truy cập
  • Trực tuyến:
    4
  • Hôm nay:
    1619
  • Tuần này:
    2692
  • Tuần trước:
    6995
  • Tháng trước:
    9218
  • Tất cả:
    365122
Video Clip

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 94 2395 184

Email: sale14@tmpvietnam.com

Skype: live:be897f2ae5ef1edc

MẠNG XÃ HỘI :  Thông tin cuối website

© 2018 Tang Minh Phat , all rights reserved