EAM360 Encoder Baumer | Bộ mã hóa vòng quay Baumer

Tình trạng:
Mới 100%
Mô tả:
Đại lý Baumer Việt Nam
Xuất xứ:
Đức
Thành phần:
Encoders

Nhà cung cấp Encoder của hãng Baumer tại thị trường Việt Nam

Nhà cung cấp Baumer Vietnam | Baumer Việt Nam

Encoder Baumer

  • Encoder single- or multiturn / CANopen®
  • Precise magnetic sensing
  • Angular accuracy up to ±0.15°
  • Additional incremental signals
  • High protection up to IP 67
  • High resistance to shock and vibrations
  • Electronic gear function

Absolute encoders

EAM360-B - SSI - MAGRES

Blind hollow shaft

  • Encoder single- or multiturn / SSI

  • Precise magnetic sensing

  • Angular accuracy up to ±0.15°

  • Resolution max. 32 bit (14 bit ST, 18 bit MT)

  • Additional incremental signals

  • Clock frequency up to 2 MHz

  • High protection up to IP 67

  • High resistance to shock and vibrations

EAM360-K - CANopen® - MAGRES

Encoder kit

  • Encoder kit single- or multiturn / CANopen®

  • Precise magnetic sensing

  • Angular accuracy up to ±0.15°

  • Additional incremental signals

  • High protection up to IP 67

  • High resistance to shock and vibrations

  • Electronic gear function

EAM360-K - SSI - MAGRES

Encoder kit

  • Encoder kit single- or multiturn / SSI

  • Precise magnetic sensing

  • Angular accuracy up to ±0.15°

  • Resolution max. 32 bit (14 bit ST, 18 bit MT)

  • Additional incremental signals

  • Clock frequency up to 2 MHz

  • High protection up to IP 67

  • High resistance to shock and vibrations

EAM360-S - CANopen® - MAGRES

Solid shaft with synchro flange

  • Encoder single- or multiturn / CANopen®

  • Precise magnetic sensing

  • Angular accuracy up to ±0.15°

  • Additional incremental signals

  • High protection up to IP 67

  • High resistance to shock and vibrations

  • Electronic gear function

EAM360-S - SSI - MAGRES

Solid shaft with synchro flange

  • Encoder single- or multiturn / SSI

  • Precise magnetic sensing

  • Angular accuracy up to ±0.15°

  • Resolution max. 32 bit (14 bit ST, 18 bit MT)

  • Additional incremental signals

  • Clock frequency up to 2 MHz

  • High protection up to IP 67

  • High resistance to shock and vibrations

EAM360R-B - analog - MAGRES

Blind hollow shaft

  • Encoder single- or multiturn / Analog

  • ISO 13849 compliant firmware

  • E1 compliant design

  • High protection up to IP 67

  • High resistance to shock and vibrations

  • Protection against corrosion C5-M

  • Wire cross section 0.5 mm²

  • Teach input for adjustment of measuring range

EAM360R-B - CANopen®/SAE J1939 - MAGRES

Blind hollow shaft

  • Encoder single- or multiturn / CANopen®/SAE J1939

  • ISO 13849 compliant firmware

  • E1 compliant design

  • High protection IP 67

  • High resistance to shock and vibrations

  • Protection against corrosion C5-M

  • Wire cross section 0.5 mm²

  • Electronic gear function

Rotary EncoderEncoder Baumer Vietnam, Encoder xung Baumer, Encoder motor, Bộ đếm xung encoder, Bộ mã hóa vòng quay Baumer

Technical data

Technical data - electrical ratings

Voltage supply

  • 10...30 VDC

Consumption typ.

  • 20 mA (24 VDC, w/o load)

Initializing time

  • ≤170 ms after power on

Data currency

  • <1 ms

Interface

  • CANopen®

  • CANopen®-Lift

  • CANopen® + incremental

Function

  • Multiturn

  • Singleturn

Profile conformity

  • CANopen® CiA communication profile DS 301, LSS profile DSP 305, device profile DS 406, DS 417

Steps per revolution

  • ≤16384 / 14 bit

Number of revolutions

  • ≤262144 / 18 bit

Absolute accuracy

  • ±0,15 ° (+20 ±15 °C)

  • ±0,25 ° (-40...+85 °C)

Sensing method

  • Magnetic

Code sequence

  • CW: ascending values with clockwise sense of rotation; looking at flange

Output stages

  • CAN-Bus, LV (3.3 V) compatible ISO 11898

  • Incremental: linedriver RS422 or push-pull (option)

Incremental output

  • 1024, 2048, 4096 ppr (other on request)

Output signals

  • A+, A-, B+, B-

Output frequency

  • ≤350 kHz

Interference immunity

  • DIN EN 61000-6-2

Emitted interference

  • DIN EN 61000-6-4

Technical data - mechanical design

Size (flange)

  • ø36 mm

Shaft type

  • ø10...15 mm (blind hollow shaft)

Protection DIN EN 60529

  • IP 65 (without shaft seal)

  • IP 67 (with shaft seal)

Operating speed

  • ≤6000 rpm

Starting torque

  • ≤2 Ncm (+20 °C, IP 65)

  • ≤2,5 Ncm (+20 °C, IP 67)

Material

  • Housing: steel zinc-coated

  • Flange: aluminium

  • Hollow shaft: stainless steel

Operating temperature

  • -40...+85 °C (see general information)

Relative humidity

  • 95 %

Resistance

  • DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz

  • DIN EN 60068-2-27 Shock 500 g, 1 ms

Weight approx.

  • 170 g

Connection

  • Flange connector M12, 5-pin

  • Flange connector M12, 8-pin

  • Cable 2 m

Chia sẻ:
Danh mục sản phẩm
Thống kê truy cập
  • Trực tuyến:
    6
  • Hôm nay:
    648
  • Tuần này:
    3306
  • Tuần trước:
    9466
  • Tháng trước:
    11606
  • Tất cả:
    173191
Video Clip

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 94 2395 184

Email: sale14@tmpvietnam.com

Skype: live:be897f2ae5ef1edc

MẠNG XÃ HỘI :  Thông tin cuối website

© 2018 Tang Minh Phat , all rights reserved