Máy đo độ cứng cao su tự động Teclock
Đại lý phân phối TECLOCK chính hãng-uy tín-chất lượng tại Việt Nam
Đại lý phân phối Teclock chính hãng-uy tín-chất lượng tại Việt Nam
Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam
Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.
1. GX-02 Teclock | Automatic hardness tester
Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.
2. GS-610 Teclock | Automatic type Motor Driving Durometer Stand
- Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.
Trọng lượng GS 610 Teclock : 9 kg
Nguồn : 100 - 240VAC ( AC adapter accessory)
3. GS-612 Teclock | Manual Operation type Durometer Stand with Speed Controller
Máy đo độ cứng cao su tự động GS 612 Teclock
|
Pressure Value |
Weigt Code-No. |
Applicable Durometer Model |
|
|
1㎏ |
Analog |
ZY-07（8 Accessory） |
A , B , E , A(Old) , TypeC(ASKER C) , O |
|
Digital |
ZY-07（9 Option） |
D , ASTM C , DO , JIS C(old type) |
|
|
4㎏ |
ZY-12（8 Option） |
||
Trọng lượng GS 612 Teclock : 8.5 kg
4. GS-615 Teclock | Manual Operation type Durometer Stand
Trọng lượng GS 615 Teclock : 3.9 kg
5. GS-607 Teclock | Durometer Tetster
6. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro
Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.
- Hardness of O ring and small rubber parts can be measured with totally automatic.
- Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.
- It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.
- As test piece table is wide, various measuring jigs can be set up
Máy đo độ cứng cao su tự động GS 608Sel Teclock
|
Hardness testing method |
IRHD・M-method |
Durometer Hardness |
|
|
Compliance standards |
ISO 48/JIS K 6253 |
ISO 7619/JIS K 6253 TECLOCK Standards/ASTM D 2240 |
|
|
Measuring accuracy |
±0.1 IRHD |
Type A/E ±1 |
JIS K 6253 |
|
Type E2/FO ±１ |
TECLOCK Standards |
||
|
Type OO ±２ |
ASTM D 2240 |
||
|
Measuring range |
30～100 IRHD |
０～100 |
|
|
Minimum indication unit |
0.1 |
||
|
Measurement part movable distance |
100mm |
||
|
Measurable test-piece dimensions |
W=160 / D=110 / H=100mm |
||
|
Conformity standards |
EC Directive (EN61326) |
||
|
Outside interface |
RS-232C |
||
|
Power |
AC100～200Ｖ/AdapterDC24V |
||
|
Weight |
7.8kg (Main unit)/0.6kg (Power unit) |
||
|
Accessories |
PC application CD (for Windows XP & 7) |
||
|
PC connecting cables/AC adapter |
|||
|
Spare plunger (x1) (ZS-121) for IRHD |
|||
|
Rubber specimen |
ZY-917 6 types set (w/Inspection table) |
||
Trọng lượng GS 608sel Teclock : 7.8 kg
8. SmartTester GX-700
New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester
Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.
Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Indentor Height (mm) |
Weight (g) |
|
|
Analog |
GS-719N |
Type A |
General rubber (Medium hardness) |
JIS K 6253 ISO 7619 ISO 868 ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
200 |
|
GS-719G |
Type A(Peak Pointer Type) |
General rubber (Medium hardness) |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
208 |
||
|
GS-719R |
Type Aφ18mm / stand combined |
General rubber (Medium hardness) |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
213 |
||
|
GS-720N |
Type D |
Hard rubber (High hardness) |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
2.50 |
200 |
||
|
GS-720G |
Type D(Peak Pointer Type) |
Hard rubber (High hardness) |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
2.50 |
208 |
||
|
GS-720R |
Type Aφ18mm / stand combined |
Hard rubber (High hardness) |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
2.50 |
213 |
||
|
GS-721N |
Type （E AO） |
(High hardness) Soft rubber |
JIS K 6253 ISO 7619 ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Hemisphere of SR2.50 |
2.50 |
200 |
|
|
GS-721G |
Type A(Peak Pointer Type) |
(High hardness) Soft rubber |
550-8050mN （56.1-821.1gf） |
Hemisphere of SR2.50 |
2.50 |
208 |
||
|
GS-719P |
Type A(Pocket Type) |
General rubber (Medium hardness) |
JIS K 6253 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
125 |
|
|
Digital |
GSD-719K |
Type A |
General rubber, soft plastic |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
313 |
|
GSD-720K |
Type D |
Hard rubber, Plastic |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
2.50 |
313 |
||
|
GSD-721K |
Type （E AO） |
Very soft rubber |
JIS K 6253, ISO 7619 ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Hemisphere of SR2.50 |
2.50 |
313 |
|
|
GSD-719K-R |
Type Aφ18mm / Stand combined |
General rubber (Medium hardness) |
JIS K 6253, ISO 7619 ISO 868, ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
320 |
|
|
GSD-720K-R |
Type Aφ18mm / Stand combined |
Hard rubber (High hardness) |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
2.50 |
320 |
||
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Presser Foot Diameter (mm) |
Indentor Height(mm) |
Weight (g) |
|
|
Analog |
GS-719H |
Type A |
General rubber / Deep hole type (narrow hole) |
JIS K 6253, ISO 7619 ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
φ12 |
2.50 |
120 |
|
GS-719L |
Type A |
General rubber / Long leg type (thick hole) |
JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
φ18 |
2.50 |
360 |
|
|
GS-720H |
Type D |
Hard rubber / Deep hole type (narrow hole) |
JIS K 6253, ISO 7619 ASTM D 2240 |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
φ12 |
2.50 |
120 |
|
|
GS-720L |
Type D |
Hard rubber / Long leg type (thick hole) |
JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505 |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
φ18 |
2.50 |
360 |
|
|
Digital |
GSD-719K-H |
Type A |
General rubber / Deep hole type (narrow hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
φ12 |
2.50 |
170 |
|
GSD-719K-L |
Type A |
General rubber / Long leg type (thick hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
φ18 |
2.50 |
380 |
|
|
GSD-720K-H |
Type D |
Hard rubber / Deep hole type (narrow hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
φ12 |
2.50 |
170 |
|
|
GSD-720K-L |
Type D |
Hard rubber / Long leg type (thick hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505 |
0-44450mN （0-4533gf） |
Conical Cone of Ｒ0.1 with 30° angle |
φ18 |
2.50 |
380 |
|
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Indentor Height(mm) |
Weight (g) |
|
GS-719P |
Type A |
General rubber (Medium hardness) |
JIS K 6253 |
550-8050mN （56.1-821.1gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
100 |
|
GS-709P |
Type A |
Soft plastic, General rubber |
JIS K 7215 |
549-8061mN （55-822gf） |
100 |
||
|
GS-755 |
Type OOO |
Ultora soft rubber |
ASTM D 2240 |
203-1111mN （20.7-113.3gf） |
Hemisphere of SR6.35 |
125 |
|
|
GS-779G |
Type A approximate |
Thin Sheet Hardness |
− |
388-1288mN （9-131gf） |
φ0.35 |
1 |
100 |
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Indentor Height(mm) |
Weight (g) |
|
|
Analog |
GS-702N |
Type D |
Plastics / Hard rubber |
JIS K 7215 ISO 868 ASTM D 2240 |
0-44483mN （0-4536gf） |
Conical Cone of R0.1 with 35° angle |
2.50 |
200 |
|
GS-702G |
Type D (Peak pointer type) |
Plastics / Hard rubber |
0-44483mN （0-4536gf） |
Conical Cone of R0.1 with 35° angle |
2.50 |
208 |
||
|
GS-709N |
Type A |
Soft plastic / General rubber |
549-8061mN （56-822gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
200 |
||
|
GS-709G |
Type A (Peak pointer type) |
Soft plastic / General rubber |
549-8061mN （56-822gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
208 |
||
|
GS-709P |
Type A (Pocket type) |
Soft plastic / General rubber |
JIS K 7215 |
550-8050mN （56.1-821.1gf |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
125 |
|
|
Digital |
GSD-719K |
Type A |
Soft plastic / General rubber |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
549-8061mN （55-822gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.50 |
313 |
|
GSD-720K |
Type D |
Plastics / Hard rubber |
0-44450mN （0-4533gf） |
Conical Cone of R0.1 with 35° angle |
2.50 |
313 |
||
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Indentor Height (mm) |
Weight (g) |
|
|
Analog |
GS-750G |
Type B (Peak Pointer type) |
Medium-hard rubber |
ASTM D 2240 |
550-8050mN (56.1-821.1gf) |
Conical corn of R 0.1 with 30° angle |
2.50 |
208 |
|
GS-751G |
Type C (Peak Pointer type) |
Hard rubber |
0-44450mN (0-4533gf) |
Truncated cone ofφ 0.79 with 35° angle |
2.50 |
208 |
||
|
GS-752G |
Type DO (Peak Pointer type) |
Medium-hard rubber |
0-44450mN (0-4533gf) |
Hemisphere of SR 1.19 |
2.50 |
208 |
||
|
GS-753G |
Type O (Peak Pointer type) |
Soft rubber |
550-8050mN (56.1-821.1gf) |
Hemisphere of SR 1.19 |
2.50 |
208 |
||
|
GS-754G |
Type OO (Peak Pointer type) |
Very soft rubber |
203-1111mN (20.7-113.3gf) |
Hemisphere of SR 1.19 |
2.50 |
208 |
||
|
GS-755 |
Type OOO |
Very soft rubber |
203-1111mN (20.7-113.3gf) |
Hemisphere of SR 6.35 |
2.50 |
125 |
||
|
Digital |
GSD-750K |
Type B |
Medium-hard rubber |
550-8050mN (56.1-821.1gf) |
Conical corn of R 0.1 with 30° angle |
2.50 |
313 |
|
|
GSD-751K |
Type C |
Hard rubber |
0-44450mN (0-4533gf) |
Truncated cone ofφ 0.79 with 35° angle |
2.50 |
313 |
||
|
GSD-752K |
Type DO |
Medium-hard rubber |
0-44450mN (0-4533gf) |
Hemisphere of SR 1.19 |
2.50 |
313 |
||
|
GSD-753K |
Type O |
Soft rubber |
550-8050mN (56.1-821.1gf) |
Hemisphere of SR 1.19 |
2.50 |
313 |
||
|
GSD-754K |
Type OO |
Very soft rubber |
203-1111mN (20.7-113.3gf) |
Hemisphere of SR 1.19 |
2.50 |
313 |
||
|
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Indentor Height(mm) |
Weight (g) |
|
|
Analog |
GS-703N |
JIS C(old type) |
Hard rubber |
JIS K 6301 |
980-44100mN （100-4500gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.54 |
200 |
|
GS-703G |
Type C(old type) Peak Pointer type |
Hard rubber |
JIS K 6301 |
980-44100mN （100-4500gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.54 |
208 |
|
|
GS-706N |
JIS A(old type) |
General rubber |
JIS K 6301 |
539-8385mN （55-855gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.54 |
200 |
|
|
GS-706G |
Type A(old type) Peak Pointer type |
General rubber |
JIS K 6301 |
539-8385mN （55-855gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.54 |
208 |
|
|
Digital |
GSD-706K |
Type A(old type) |
General rubber |
JIS K 6301 |
539-8385mN （55-855gf） |
Truncated Cone of φ 0.79 with 35° angle |
2.54 |
313 |
- WISE CONTROL
- REDLION
- TDK LAMBDA
- MATSUSHIMA
- GASTRON
- AT2E
- KELLER ITS
- TECLOCK
- IBA
- SCHENCK PROCESS
- AUTROL
- BECKHOFF
- BIRCHER
- BAUMUELLER
- BROOK INSTRUMENT
- BRONKHORST
- CEIA
- CEMB
- CS INSTRUMENTS
- COMET SYSTEM
- DWYER
- ELCO HOLDING
- EUROSWITCH
- ENDRESS + HAUSER
- FIREYE
- FOX THERMAL
- FINETEK
- GEMU
- IPF ELECTRONIC
- INTORQ
- KEOFITT
- KIEPE
- KOMETER
- KROHNE
- LABOM
- MARK-10
- METRIX VIBRATION
- MKS ANLASSER
- MAGNETEK
- PCI INSTRUMENT
- OHKURA
- PORA
- PAVONE SISTEMI
- RIELS
- ROTORK
- SORINC
- SHINHO SYSTEM
- STAUBLI
- SPOHN+BURKHARDT
- TEMAVASCONI
- TEK-TROL
- TEMPSENS
- VEGA
- YOUNGTECH
- ZAMA SENSOR
- VALPES
- LAPAR
- ASHCROFT
- MAXCESS
- NORGREN
- OKAZAKI
- MINIMAX
- UTILCELL
- KRACHT
- GÜNTHER
- ROSEMOUNT
- AROMANIKKI
- MEDENUS
- SAUTER
- HELUKABEL
-
Trực tuyến:6
-
Hôm nay:3581
-
Tuần này:16389
-
Tuần trước:14444
-
Tháng trước:26039
-
Tất cả:2663373