Thiết bị đo lưu lượng CS Instruments | Flow meter Cs Instruments
Công Ty Tăng Minh Phát - Đại lý phân phối thiết bị đo lưu lượng Cs Instruments tại Việt Nam
Đồng hồ đo lưu lượng CS Instrument | CS Instrument Việt Nam
VA 525 CS Instrument | Flow sensor with integrated flow straightener / no inlet sections necessary
Thiết bị đo lưu lượng khí CS Instrument
The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. Due to its reasonable price and modern digital interfaces this compact in-line flow sensor is used when many machines (compressed air consumers) are to be integrated as easily as possible into an energy monitoring network.
The high-contrast, integrated display also displays the current values rotated by 180° if desired (very useful for overhead installation). Depending on the configuration, two of the following values can be displayed:
- Current consumption in m³/h, l / min, ...
- Total consumption (meter reading) in m³, l, kg
- Temperature measurement
- Optional: Pressure measurement
Special advantages of the flow sensor VA 525
- Compact, small design - for use in machines, behind maintenance unit at the end user
- Optionally with classic analogue signals (4...20 mA and pulse) or digital interfaces such as Modbus RTU, Ethernet (also PoE), M-Bus
- All interfaces are programmable via the display
VA 550 CS Instrument | Flow meter for heavy duty industrial applications
The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.
VA 570 CS Instrument - Flow meter with integrated measuring section
Flow meter VA 570 is supplied with an integrated measuring section for compressed air and gas pipes. The measuring sections are available in flanged version or with R resp. NPT thread.
Flow sensor for compressed air and gas - VA 500
Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000.
VA 520 - Mass Flow Meter for Compressed Air and Gas
Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements
- WISE CONTROL
- TDK LAMBDA
- B&K Vibro
- BROOK INSTRUMENT
- CS INSTRUMENTS
- ELCO HOLDING
- FOX THERMAL
- IPF ELECTRONIC
- KELLER ITS
- LAND AMETEK
- METRIX VIBRATION
- MKS ANLASSER
- NAGANO KEIKI
- PCI INSTRUMENT
- PAVONE SISTEMI
- SCHENCK PROCESS
- SHINHO SYSTEM
- BRAND OTHER