Đại lý Elco Holding Việt Nam | Elco Holding Việt Nam

Encoder Elco Holding

EV58P Elco Holding

The standard hollow shaft incremental encoder EV58P of the Topydic series has a good resistance to mechanical damage and is suitable for universal use. The continuous stainless steel hollow shaft with a maximum bore diameter of 15mm has a double bearing design and can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The multiple output circuits and the built-in polarity reversal and short-circuit protection also simplify the connection to most PC's.

• Incremental encoder EV58P series
• Robust metal housing
• Hollow shaft 8 mm - 15 mm
• Output circuit RS422 or Push-Pull
• Resolution max. 5000 ppr
• Reverse and short circuit protection
• Shock and vibration resistant
• Protection class IP65
• Different connection types optional

EV90P Elco Holding

The heavy-duty hollow-shaft incremental encoder of the EV90P series has good resistance to mechanical damage and is suitable for use in heavy industry. The continuous stainless steel hollow shaft with a maximum bore diameter of 45mm can withstand relatively high axial and radial forces. The mechanical through-hole mounting and the different hollow shaft diameters also bring space-saving advantages for the most diverse users. The different output circuits and built-in reverse polarity and short circuit protection simplify connection to most PC's.

• Incremental encoder EV90P series
• Robust metal housing
• Hollow shaft 25 mm - 45 mm
• Torque arm or mounting plate for fixation
• Different connection types optional
• Output circuit RS422 or Push-Pull
• Resolution max. 2500 ppr
• Reverse and short circuit protected
• Shock and vibration resistant
• Protection class IP65

EV150P Elco Holding

The EV150P Series Topydic rotary encoders, with large continuous hollow shaft, are widely used in industrial environments where direct mounting to the drive shaft is required for speed measurements. The stainless steel shaft tolerates relatively large axial and radial forces and is therefore very suitable for heavy industry. The torque support of the housing via mounting plate, stator coupling or mounting arm. The maximum resolution is 2048 pulses per revolution.

• Incremental encoder EV150P series
• Robust metal housing
• Hollow shaft 60 mm - 80 mm
• Different connection types optional
• Torque arm or mounting plate for fixation
• Output circuit RS422 or Push-Pull
• Resolution max. 2048 ppr
• Reverse and short circuit protected
• Shock and vibration resistant
• Protection class IP65