Đại lý Matsushima Việt Nam | Matsushima Vietnam

Tình trạng:
Mới 100%
Mô tả:
Đại lý Matsushima tại Việt Nam
Xuất xứ:
Japan
Thành phần:
Thiết bị tự động hóa trong công nghiệp
Mã sản phẩm:
Matsushima vietnam

Matsushima chuyên cung cấp các sản phẩm cho các ngành công nghiệp như : xi măng, khai thác khoáng sản, chế biến thức ăn gia súc

Đại lý Matsushima Việt Nam - TMP VIETNAM

Matsushima VietNam | Nhà phân phối thiết bị của hãng Matsushima tại Việt Nam

 KÍNH GỬI QUÍ KHÁCH HÀNG :

Matsushima - Japan : cung cấp các giải pháp về báo lệch băng tải, thiết bị tự động căng chỉnh băng tải, cảm biến đo mức ( radar, siêu âm,điện dung...), công tắc an toàn, công tắc giật dây....cho các ngành công nghiệp như : xi măng, bao bì, thức ăn gia súc, thép, dệt, thủy điện, nhiệt điện, đặc biệt là ngành khai thác khoáng sản..

Mục lục nội dung

Hiện nay Tăng Minh Phát là Đại lý phân phối chính thức Matsushima tại Việt Nam.

Một số sản phẩm của hãng Matsushima cung cấp trên thị trường Việt Nam :

1. Thiết bị bảo vệ băng tải Matsushima | Belt Conveyor Protection Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Công tắc điều chỉnh tốc độ Matsushima | Speed Switch (NON-CONTACT TYPE)

Đại lý Matsushima Việt Nam - TMP VIETNAM

                                                   Cảm biến tốc độ Matsushima

SPEED SWITCH is a non-contact type motion sensor to detect the revolving speed of machinery shaft and operates output relay when the speed reaches setting value.

Công tắc điều chỉnh tốc độ còn được gọi là cảm biến tốc độ được sử dụng để phát hiện xem trục quay có quay trong nhiều máy móc, băng tải, nhà máy điện và trong các ngành công nghiệp liên quan đến sản xuất xi măng, đường, dệt may, giấy, sane xuất than, ...sử dụng các công nghệ cơ điện, điện tử hoặc từ tính

Model : ESPB-050, ESPB-051, TL-N20MD1, ATS-051, ESAW-102/132, ESKB-610M/MU

  • Power supply : AC20 - 240V , DC24V
  • Range of Actuation speed : 2 - 3600P/min
  • Speed display : 2 - 3600P/min
  • Contact output : A contact x 2

b. Công tắc giám sát tốc độ Matsushima | Speed Switch (SHAFT-CONNECTING TYPE)

Công tắc giám sát tốc độ băng tải của hãng Matsushima tại Việt Nam

Speed Switch is applicable to confirm if a mechanical shaft, which rotates in extra-low speed as typified by“ sending roller of reheat furnace”,“low speed agitator or thickener” ,etc.,rotates in proper speed.

Extra-low speed type
Rated speed : 179rpm Max.
Actuating speed : 0.1rpm to 99.9rpm

c. Magnetic Type Speed Relay

Speed Relay is a mechanical type motion sensor for monitoring operation speed of belt conveyors, cranes, crushers, etc., and operates when speed of the machine shaft becomes the setting speed. Since the microswitch in Speed Relay is mechanically turned ON or OFF by induction torque generated by rotation of the permanent magnet, the power supply is not necessary. Besides, the maintenance is easy.

Model : ESRW-120, ESRW-122, ESRW-302, ESRW-322

Overspeed and Slip Detection
Rated speed : 80rpm to 1800rpm
                    : 33m/min. to 300m/min.
Actuating speed : 60rpm (Minimum setting speed)

d. Công tắc giật dậy Matsushima | Pull Cord Switch Matsushima

Công tắc giật dây Matsushima là một trong những thiết kế cực kì thông minh để đảm bảo an toàn cho người lao động, cũng như tránh các hư hỏng nghiêm trọng trong nhà máy. Khi xảy ra sự cố, người dùng có thể tắt hệ thống từ bất kì vị trí nào trong hệ thống.

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position. According to the Industrial Safety & Health Regulations, it has been assigned to install the Pull Cord Switch to belt conveyor in Japan.

Model : ELAW-21, ELAM-21W, ELADP-21W

              ELAW-31, ELAM-31W, ELADP-32W

              ELAW-61P, ELAM-61PW, ELADP-62PW

Belt Conveyor Emergency-stop Switch
Reset system : Self-reset
                        Manual-reset
Required force of pull cord : 49±9.8N(5 ± 1kgf)

e. Công tắc giật dây dừng khẩn cấp Matsushima | Wire-rope type Emergency Stop Switch PULLSTOP

Đại lý Matsushima Việt Nam - TMP VIETNAM

               Công tắc giật dây dừng khẩn cấp ERTD-50 Matsushima

For Emergency-stop
Reset Type Manual-reset
Operating torque 98N(with tension spring)

Model : ERTD-50

f. Công tắc báo lệch băng tải Matsushima | Belt sway switch Matsushima

  • For Sway and Deviation Detection
  • Reset system Self-reset
  • Contacts : 1 contact for alarm

                           1 contact for emergency stop

Model : Elap-20

Belt Sway Switch is a protective switch for detecting the meandering (sway or deviation) of belt conveyors, and sends out an alarm signal and an emergency stop signal. Suited to be used for belt breakage prevention and orefalling prevention due to the belt sway. Widely used in iron and steel, cement and chemical plants, thermal power plants, etc., since it is essential for safety operation of belt conveyors.

g. Belt Tear Detector

Đại lý Matsushima Việt Nam - TMP VIETNAM
  • Detection of Conveyor Belt Breaking Accident
  • Detecting method Silicon rubber compressing system
  • Installation Between Impact rollers
  • Size Belt width 600~2200mm
  • Output contact 1 detection contact (Cap. AC 250V 2A)

Model : SCPT-060-30, SCPT-075-30, SCPT-090-30, SCPT-100-30, SCPT-105-30, SCPT-120-30, SCPT-140-30, SCPT-160-30, SCPT-180-30, SCPT-200-30

h. Motor-Operated Adjusting Carrier

  • For Belt Sway Correction
  • Belt width 500mm to 2000mm
  • Belt speed 250m/min. or below
  • Trough angle 0 to 45°
HAB-MC-050 HAB-MC-160 HAB-DC-135302H HAB-MR-075052H
HAB-MC-060 HAB-MC-180 HAB-DC-140302H HAB-MR-090052H
HAB-MC-075 HAB-MC-200 HAB-DC-150302H HAB-MR-100052H
HAB-MC-090 HAB-DC-050302H HAB-DC-160302H HAB-MR-105052H
HAB-MC-100 HAB-DC-060302H HAB-DC-180302H HAB-MR-120052H
HAB-MC-105 HAB-DC-075302H HAB-DC-200302H HAB-MR-135052H
HAB-MC-120 HAB-DC-090302H HAB-DC-120302H HAB-MR-140052H
HAB-MC-135 HAB-DC-100302H HAB-MR-045052H HAB-MR-160052H
HAB-MC-140 HAB-DC-105302H HAB-MR-050052H HAB-MR-180052H

2. Cảm biến đo mức Matsushima | Continuous Level Measurement Matsushima

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Cảm biến đo mức chất rắn bằng sóng Radar Matsushima | Radar Level Transmitter (FOR POWDER)

The Radar Level Transmitter is designed specitically for medium/long range measurement of all kinds of power,particle and bulk solids. The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters. The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Cảm biến Radar đo mức bột Matsushima

Model : MWLM-PR26C, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H2F

b. Cảm biến đo mức chất lỏng bằng sóng Radar | Radar Level Transmitter (FOR LIQUID)

The Radar Level Transmitter is designed specitically for short/medium range measurement of liquid,sludge and slurry.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement.
Adjustments can be done by entering simple parameters.The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

Model : MWLM-PR26C1G, MWLM-PR26H1G, MWLM-PR26H2G, MWLM-PR26H3G, MWLM-PR26H3F, MWLM-PR26H3S, MWLM-PR26H7G, MWLM-PR26H7F, MWLM-PR26H7S

  • Measurement of liquid level
  • Measurement range : 0.3(from end of antenna) to 10.0m
  • Accuracy : ±0.25% F.S.

c. Cảm biến đo mức chất rắn bằng sóng siêu âm Matsushima | Ultrasonic Transmitter (FOR POWDER)

The ultrasonic level meter is designed specially for medium range measurement of powder and liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters.

Cảm biến siêu âm đo mức Matsushima

Model : USLM-PE92F, USLM-PE92S, USLM-PE92B, USLM-PE92SB, USLM-PE93F, USLM-PE93S, USLM-PE93B, USLM-PE93SB

  • Measurement of powder and liquid levels
  • Measurement ・Integrated ・Adjustable ・Separate ・Model
  • range -flange type -flange type type
  • Powder(liquid), Powder(liquid), Powder(liquid)
  • 1.1-10m(25m), 0.9-10m(25m), 0.9-10m(25m) PE93
  • 1.1-20m(45m), 0.9-20m(45m), 0.9-20m(45m) PE95
  • Accuracy : ±0.25% F.S.

d. Cảm biến đo mức chất long bằng sóng siêu âm Matsushima | Ultrasonic Transmitter

The ultrasonic level meter is designed specifically for short range measurement of liquid levels. Its simple construction with no converter required lends to ease of installation and wiring and improved maintainability. Dedicated software is installed so that the level meter is ready for highly accurate measurement after simply entering required parameters. The instrument fulfills its function even in severe environmental conditions where corrosive gas or vapor is generated.

Cảm biến siêu âm đo mức chất lỏng Matsushima

  • Measurement of liquid levels
  • Measurement range ・Measurement ・Separate type ・typerange 

                                             0.6~10m 0.5~10m PE92

  • Accuracy : ±0.25% F.S

Model : USLM-PE95F, USLM-PE95S, USLM-PE95B

e. Bộ hiển thị tín hiệu Matsushima

f. Encoder Matsushima

3. Point Level Detection & Power Measurement

Đại lý Matsushima Việt Nam - TMP VIETNAM

a. Admittance Level Switch Matsushima

  • Product Structure: Rod type, Wire type
  • Power Supply: AC/DC22~264V 50/60Hz
  • Power Consumption: 4.7W(AC), 1.8W(DC)
  • Mounting: R1 Thread (rod type)
  • JIS5K65A flange (wire type)
  • Length: Rod 0.25~2m
  • Wire : 0.7~10m
  • Range: range 1 : 0~10pF

                                     range 2 : 0~50pF
                                     range 3 : 0~100pF
                                    range 4 : 0~1000pF

  • Signal Output: 1C

Model : MAL-110, MAL-120

b. Conductive Level Switch

  • Level Detection for Powder Material
  • Probe length : Max.5m

Model : AMVC-300, MF IP-031W

c. Full Detector

  • Upper Detection for Bulk Solids
  • Detecting method : Tilting angle detection
  • Suspending distance : (Max.5mm) from the mouning surface

Model : MFFC-20C, AMDC-12C

d. Dust Monitor

  • For Detection of leakage of dust collector and bag filter breakage
  • Measurement range : 0.1mg/㎥~1000mg/㎥
  • Gas flow rate : 4.0 m/s or greater
  • Output signal : 4 to 20 mADC (500Ω)
  • Contact output : 2 NONC contact for upper limit alarm                                                                                                                                                    1 NONC contact for fault alarm

Model : PFM-M01E, PFM-M11P, PFM-M11PT, PFM-M01PEX

e. Dust Switch

  • For detection of broken bag of compact dust collector
  • Particle size : 0.3 micrometer of higher
  • Velocity : 4.0 m/s or higher
  • Output signal open collector output (NPN)
  • Model : PFM-DSW10

e. Microwave Flow Switch

  • ​​​​​Non-Contact Movement Detection Sensor
  • Setting range : Max. 1.5m
  • Frequency : 24GHz band
  • Allowable pressure approx : -980MPa~+980MPa
  • Model : MWFS-SW-02C

g. Microwave Flow Monitor

  • Monitoring the relative flow rate balance of multi-branched piping system
  • Measurement principle Microwave method
  • Measurement frequency : 24.15 GHz
  • Accuracy of repeatability : ±5%
  • Pipe diameter : 200mm or below

Model : MWFM-AN-01

Các sản phẩm của Matsushima được sử dụng rộng rãi trong các ngành công nghiệp như : xi măng, khai thác khoáng sản, nhiệt điện, chế biến thức ăn gia súc.

Xem thêm chi tiết : TẠI ĐÂY

Matsushima Vietnam

PRODUCTS INFORMATION

  • CONTINUOUS LEVEL MEASUREMENT
  • POINT LEVEL DETECTION
  • POWDER MEASUREMENT
  • BELT CONVEYOR PROTECTION
  • POSITION TRANSMITTER
  • ACTUATOR
Bình luận của bạn
*
*
*
*
 Captcha
Chia sẻ:
Danh mục sản phẩm
Thống kê truy cập
  • Trực tuyến:
    9
  • Hôm nay:
    1885
  • Tuần này:
    7518
  • Tuần trước:
    7875
  • Tháng trước:
    14409
  • Tất cả:
    2621145
Video Clip

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hoàng Xuân Tiến (Mr)

Hotline: 03888 30881

Email: sale06@tmpvietnam.com

© 2018 Tang Minh Phat , all rights reserved