Thiết bị phát hiện ngọn lửa 95IR, 95UV, 95DS Fireye - Cảm biến ngọn lửa Fireye

Tình trạng:

Mới 100%

Mô tả:

Đại lý Fireye tại Việt Nam

Xuất xứ:

Đức

Thành phần:

Cảm biến ngọn lửa

Mã sản phẩm:

95IR-95UV-95DS

Công Tăng Tăng Minh Phát - Nhà phân phối thiết bị phát hiện ngọn lửa, cảm biến ngọn lửa Fireye, cảm biến phát hiện ngọn lửa bằng tia hồng ngoại, cảm biến phát hiện ngọn lửa bằng tia cực tím Fireye

Thông tin sản phẩm
Thông số kỹ thuật

Đại lý Fireye chính hãng tại Việt Nam | Fireye Vietnam

Thiết bị phát hiện ngọn lửa 95IR Fireye - Thiết bị phát hiện ngọn lửa 95UV Fireye - Thiết bị phát hiện ngọn lửa 95DS Fireye

Thiết bị phát hiện ngọn lửa Fireye - Cảm biến phát hiện ngọn lửa Fireye - Fireye Vietnam

InSight Flame Scanners 95IR_95UV_95DS

The Fireye InSight Type 95 flame scanners incorporate an internal flame relay with adjustable ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier. All Fireye inSight scanner models are powered by 24 Vdc, have either a twelve-pin electrical quick disconnect or 10 ft. cable (“CG” models), and contain electronic self-checking (no mechanical shutter required). The scanners contain an eight character alpha-numeric LED display and a four push-button keypad to enable the user to view operating parameters and select setpoints.

Features	Basic Models (S1)			Expanded Models (S2)
	95IR S1 95UV S1 95DS S1			95IR S2 95UV S2 95DS S2
Infrared Sensor	✔		✔	✔		✔
Ultraviolet Sensor		✔	✔		✔	✔
Flame Relay	✔	✔	✔	✔	✔	✔
Fault Relay	✔	✔	✔	✔	✔	✔
4-20 mA Output	✔	✔	✔	✔	✔	✔
Modulation
Frequency Selections	3	3	3	21	21	21
Memory Files	2	2	2	4	4	4
Communications				✔	✔	✔
AutoTune				✔	✔	✔
Pre-Edit	✔	✔	✔

Model : 95IR S1, 95UV S1, 95DS S1 Fireye

95IR S2 , 95UV S2 , 95DS S2 Fireye

Thiết bị phát hiện ngọn lửa Fireye - Cảm biến phát hiện ngọn lửa Fireye - Fireye Vietnam

Thiết bị phát hiện ngọn lửa 95IR Fireye - Thiết bị phát hiện ngọn lửa 95UV Fireye - Thiết bị phát hiện ngọn lửa 95DS Fireye

InSight Flame Scanners 95IR-95UV-95DS

MECHANICAL

INSIGHT SCANNER SPECIFICATIONS

Housing Material: Cast aluminum with gray polyester powder coat finish

Housing Weight: 4.3 lbs (1.96kg) or 5.9 lbs. (2.70kg) “CG” models, flange additional

Environmental: NEMA 4X, IP66, Class 1 division II Groups A, B, C, D Hazardous areas

Mounting: Requires one of two threaded mounting flanges, ordered separately (see below) Mounting Flanges: P/N 60-2692 - 1" NPT female pipe mount with 3/8" NPT female cooling air connection,includes 1" NPT x 3" long heat insulating nipple

P/N 60-2693 - 1" BSP female pipe mount with 3/8" BSP female cooling air connection, includes 1" BSP x 3" long heat insulating nipple

Mounting Flange Weight: 0.62 lbs (0.28kg) Cooling / Purge Air Requirements: Source: Clean, dry, cool

Volume: 4 SCFM (113 l/min) at 3/8" threaded mounting flange, or 1 inch “Y” fitting,nmounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min).

Pressure: Adequate to overcome furnace or windbox pressure

Temperature Rating: -40° F to + 150°F (-40°C to +65°C)

Humidity: 0% to 95% relative humidity, non-condensing

ELECTRICAL

Input Power: 24 Vdc, +10%, -15% supply current 0.35 A, 8.5 VA

Electrical Connection: 12-pin quarter-turn quick-disconnect or 10 ft. (3m) captive cable (“CG” models) Relay Output: FLAME RELAY, SPST (N.O.)

FAULT RELAY, SPST (N.C.)

Contact Rating: Minimum: 10 mA @ 5 Vdc Maximum: 2 A @ 30 Vdc

2 A @ 50 Vac (CE approved non ”CG” models)

2 A @ 240 Vac (all FM and CSA models, all”CG” models)

Analog Output: 4-20 mA dc current, referenced to 24 Vdc common, maximum connected load: 750 ohms Status

Indication: Eight (8) character alpha-numeric LED display (scrolling capability)