Thiết bị phát hiện ngọn lửa 105F1-1 Fireye - Flame scanner Fireye

Tình trạng:
Mới 100%
Mô tả:
Đại lý Fireye tại Việt Nam
Xuất xứ:
Đức
Thành phần:
Cảm biến ngọn lửa
Mã sản phẩm:
105F1-1

Công Ty Tăng Minh Phát chuyên cung cấp thiết bị phát hiện ngọn lửa, cảm biến ngọn lửa của hãng Fireye tại Việt Nam

Thiết bị phát hiện ngọn lửa 105F1-1 Fireye - Flame scanner Fireye

Đại lý cung cấp Fireye tại Việt Nam | Fireye Vietnam

105F1-1 Fireye - Thiết bị phát hiện ngọn lửa Fireye - Cảm biến ngọn lửa Fireye

Paragon 105F1-1 Flame Scanner | Máy quét ngọn lửa Fireye

Thiết bị phát hiện ngọn lửa 105F1-1 Fireye

Mô tả : 

105F1-1 flame scanner Fireye is a microprocessor based flame analysis device utilizing solid state flame detection sensors. The Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learned vs. Stored Curve Fitting. Combinations of these measured properties are utilized to provide superb discrimina- tion in a multiple burner, multi flame application as well as monitoring of flame performance charac- teristics such as peak flame temperature.

The Paragon scanners incorporate three internal flame relays for customer BMS interface, eliminat- ing the need for a remote amplifier. Relay one signals the presence or absence of flame and responds to automatically set ON/OFF thresholds. Relay two signals internal faults as detected within the scanner by internal self diagnostics. Relay three signals flame temperature is above or below adjust- able user designated values. The flame and fault relay must be connected to the BMS to provide ade- quate safety monitoring of the flame presence. The temperature relay can be used for alarming or signaling or can be connected to the BMS for remote monitoring.

Ứng dụng :

Fireye Paragon type 105F1-1 flame scanners are used to detect emissions from fossil fuel flames. These can be gaseous fuel, light petroleum distillates, diesel fuels, heavy fuel oils and a variety of coals. They are suited for application to multiple burner furnaces in utilities and pulp and paper plants, industrial application such as petrochemical, refinery and chemical production, through to industrial boilers. Flame temperature measurement can be used to monitor and report on many appli- cations including specialized burners used in applications such as Low NOx, Incineration and sulfur recovery.

PARAGON SCANNER EXTENDED CABLE GLAND VERSIONS AND ACCESSORIES

Part Number

Description

105F1-1CG-020

Paragon cable gland scanner with 20 feet of cable

105F1-1CG-030

Paragon cable gland scanner with 30 feet of cable

105F1-1CG-040

Paragon cable gland scanner with 40 feet of cable

105F1-1CG-050

Paragon cable gland scanner with 50 feet of cable

105F1-1CG-060

Paragon cable gland scanner with 60 feet of cable

105F1-1CG-070

Paragon cable gland scanner with 70 feet of cable

105F1-1CG-080

Paragon cable gland scanner with 80 feet of cable

105F1-1CG-090

Paragon cable gland scanner with 90 feet of cable

105F1-1CG-100

Paragon cable gland scanner with 100 feet of cable

105F1-1CGET-020

Paragon extended temperature scanner with cable gland and 20 feet of cable

105F1-1CGET-030

Paragon extended temperature scanner with cable gland and 30 feet of cable

105F1-1CGET-040

Paragon extended temperature scanner with cable gland and 40 feet of cable

105F1-1CGET-050

Paragon extended temperature scanner with cable gland and 50 feet of cable

105F1-1CGET-060

Paragon extended temperature scanner with cable gland and 60 feet of cable

105F1-1CGET-070

Paragon extended temperature scanner with cable gland and 70 feet of cable

105F1-1CGET-080

Paragon extended temperature scanner with cable gland and 80 feet of cable

105F1-1CGET-090

Paragon extended temperature scanner with cable gland and 90 feet of cable

105F1-1CGET-100

Paragon extended temperature scanner with cable gland and 100 feet of cable

59-5356-10TB

60-2862 termination/junction box with 10 feet of cable for use with Paragon scanner

59-5356-20TB

60-2862 termination/junction box with 20 feet of cable for use with Paragon scanner

59-5356-30TB

60-2862 termination/junction box with 30 feet of cable for use with Paragon scanner

59-5356-40TB

60-2862 termination/junction box with 40 feet of cable for use with Paragon scanner

59-5356-50TB

60-2862 termination/junction box with 50 feet of cable for use with Paragon scanner

60-2862

Paragon termination/ junction box for local cable termination

Thiết bị phát hiện ngọn lửa 105F1-1 Fireye - Cảm biến ngọn lửa Fireye - Fireye Vietnam

Thông số kĩ thuật : 

MECHANICAL
Housing Material: Cast aluminum with gray polyester powder coat finish
Housing Weight: 5.5 1bs (2.5kg), non-“CG” models
                              5.5 1bs (2.5kg), ET non-“CG” models
                              6.9 lbs. (3.1kg) “CG” models
                              7.5 lbs. (3.4kg) “CEX” models
Environmental: NEMA 4X, IP66, Class I Division 2, Groups A, B, C and D, Class II Division 2, Groups F and G (refer to agency approvals table). CEX versions are ATEX EExd IIC T6 and IP66 rated
Mounting: Uses mounting flange kits ordered separately (see below).
Mounting Flange : P/N 129-182-1 : 1" NPT female pipe mount flange kit, includes gasket flange adapter, mounting snout and locking 
                                 P/N 129-182-2: 1" BSP female pipe mount flange kit, includes gasket, flange adapter, mounting snout and locking 
Shipping Weight: 0.62lbs. (0.28kg)
Cooling / Purge Air Requirements: Source: Clean, dry, cool
Volume: 4 SCFM (113 l/min) at 3/8" threaded mounting flange, or 1 inch “Y” fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min).
Pressure: Adequate to overcome furnace or windbox pressure
Cooling Air Requirementsfor “ET” Models:
Pressure: Normal operating 40 to 45 psi, 60 psi Max.
Inlet air temp to be from +10°C to +26°C (Warning: if inlet air is greater than +26°C then the scanner temperature rating is de-rated).
Inlet and exhaust air to be attached to the scanner by means of 1/4” OD tubing with no less than a 1/8” inside diameter.:
Temperature Rating: -40°F to + 150°F (-40°C to +65°C) +50°F to + 185°F (+10°C to +85°C) for extended temperature “ET” versions
Humidity:  0% to 95% relative humidity, non-condensing
ELECTRICAL
Input Power: 24 Vdc, +20%, -25% supply current: 200mA                                                                                                              Electrical Connection: 12-pin and one 8-pin quarter-turn quick-disconnect socket per scanner. “CG” models have cable glands  and  10  ft (3m) of captive cables “CEX” models have 3/4” threaded opening and internal terminal blocks
Relay Output : Flame Safety Relay (Com, N.O., N.C.), Fault Safety Relay (N.O.), Flame Temperature Relay (N.O.)
Contact Rating: Minimum: 10 mA @ 5 Vdc.                                                                                                                                                                              Maximum: 1 A @ 30 Vdc
Analog Output: Two 4 to 20mA analog outputs one for Flame Signal, one for flame temperature. Optically isolated 4 to 20mA DC current referenced to 24 Vdc common, maximum connected load: 750 ohms. Fireye recommends the 60-2685-X 24 Vdc power supply for best performance and for a SELV rating of the 4-20mA analog output leads.
Analog Input:  One 4 to 20mA analog input. (For future use).
Status Indication: LED display of measured flame signal and peak temperature, flame relay ready, flame learn select and fault codes. Multiple LED indication for flame signal strength, flame relay, ready, target, background select and fault codes.
Operator Interface: Four (4) pushbutton style keys
Cable Specification: P/N 59-536 (8 conductors), 59-535 (12 conductors):
Lead free, rugged, multi-conductor control and signal cable for industrial applications. Finely stranded tinned copper conductors.
Multiple approvals, UL type PLTC, UL CMG, UL Oil Res. 1, CMG and CE. PLTC  with open  wiring approval allows for use in overhead trays eliminating the need for conduit. UV resistant and  is approved for direct burial and meets Class 1, Div. 2 requirements.

Bản vẽ kĩ thuật :

Thiết bị phát hiện ngọn lửa 105F1-1 Fireye - Flame scanner Fireye

Bình luận của bạn
*
*
*
*
 Captcha
Chia sẻ:
Danh mục sản phẩm
Thống kê truy cập
  • Trực tuyến:
    5
  • Hôm nay:
    2
  • Tuần này:
    5635
  • Tuần trước:
    7875
  • Tháng trước:
    12526
  • Tất cả:
    2619262
Video Clip

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hoàng Xuân Tiến (Mr)

Hotline: 03888 30881

Email: sale06@tmpvietnam.com

© 2018 Tang Minh Phat , all rights reserved