Máy cân bằng lốp ô tô ER90 EVO Cemb
Máy cân bằng lốp CEMB, CEMB VIETNAM
Công Ty Tăng Minh Phát - Đại lý CEMB chính thức tại Việt Nam
ER90 EVO CEMB
The new immediate no contact balancing machine without need of check-spin
The new ER90 EVO automatically detects wheel data simply pressing one single touchbutton and after a few seconds gives a clear and accurate indication of exact position to place counterweights (clip-on and/or stick-on weights)
- Ergonomic design
The ErgoFast range of wheel balancers has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch screen are only but a few of the advantages developed for our end users.
- 3D Laser Scan
– Touchless wheel distance and diameter measuring system which, combined with the external LA sonar for width measurement, detects with 3D precision the dimensions of any profile, even the most complex; no intervention of the operator.
– Advanced technology that speeds up the dimensions reading process without penalizing reliability and precision.
– Brighter laser pointer that grants an extreme accuracy during correction thanks to a clear indication of the application point for stick-on weights.
– Greatest robustness for a long lasting usage. No moving parts are exposed, risks of damages are reduced
– Easy maintenance
- Side Laser
Two laser beams indicate the exact 12 o’clock position to place clip-on weights. With these accurate reference points, any possibility of erratically placing counterweights is eliminated.
- EMS Sonar for radial run-out measurement
Vibrations caused by run-out do not depend on the unbalance of wheel. The ER90 EVO, with one single quick spin, detects all causes of vibration. The EMS Sonar, supplied as standard on machine, detects wheel eccentricity with a 0,1 mm accuracy and enables a precise diagnosis within seconds.
- OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
Thông số kĩ thuật :
Single phase power supply 115 / 230 V 50 / 60 Hz Max. absorbed power 0,65 kW Balancing speed 100 rpm Measuring cycle for 15 kg (33 lb) wheel 4.7 s Measurement uncertainty 0,5 g Average noise < 70 dB (A) Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm Rim diameter setting range 10” ÷ 30” or 265 ÷ 765 mm Min./Max. compressed air pressure 7 ÷ 10 Kg / cm2 | ~ 0.7 ÷ 1 MPa; | ~ 7 ÷ 10 bar; | ~ 105 ÷ 145 psi Max. wheel weight < 75 kg Machine weight 170 kg
XEM THÊM CHI TIẾT : THEO ĐƯỜNG LINK
- WISE CONTROL
- TDK LAMBDA
- BROOK INSTRUMENT
- CS INSTRUMENTS
- COMET SYSTEM
- ELCO HOLDING
- ENDRESS + HAUSER
- FOX THERMAL
- FLOW METER
- IPF ELECTRONIC
- KELLER ITS
- LAND AMETEK
- METRIX VIBRATION
- MKS ANLASSER
- NAGANO KEIKI
- PCI INSTRUMENT
- PAVONE SISTEMI
- SCHENCK PROCESS
- SHINHO SYSTEM
- BRAND OTHER