Cảm biến áp suất 815DT Sor - Sor Inc Vietnam

Xuất xứ:

USA

Tình trạng:

Mới 100%

Mô tả:

Nhà cung cấp Sor Inc Việt Nam

Thành phần:

Cảm biến áp suất

Mã sản phẩm:

815DT

Models: 815DT
Ranges: 0-138 in H2O (0-5 psid) to 0-500 psid
Certifications:: Unit: ATEX, CRN, Dual Seal (Canada), FM (US and Canada)

Thông tin sản phẩm
Thông số kỹ thuật

815DT Sorinc - Cảm biến áp suất 815DT Sor - 815DT Differential Pressure Transmitter Sor Inc

The 815DT smart pressure switch-transmitters are rugged, compact, loop-powered instruments that are ideally suited for hazardous locations and hostile environments where space is limited. The 815DT offers many industry standard outputs to meet applications where low-cost, discrete and continuous monitoring is required or preferred. This versatile instrument may be used to safely monitor and control many process applications, but is specifically designed for upstream, midstream, and downstream oil & gas applications. Its stainless-steel construction and three-year warranty dramatically reduces the total cost of ownership.

Features
•   HART®7 Communication Protocol with 4-20 mA Output
•   1-5 VDC (Low-Power) Mode of Operation
•   Modbus RTU (RS-485) Serial Communications
•   Configurable Normally-Open Solid-State Switch Output (SPST)
•   ±0.10% (URL) Continuous Output Accuracy
•   Zero Balance & URL: ±0.25% URL (Each)
•   Compact, 316 Stainless-Steel, Explosion Proof Housing
• NACE MRO 175/ISO 15156 Certification option available
•   Hermetically Sealed Leads
•   Pressure Ranges: 0-5 psi to 0-30,000 psi for 815PT, 0-5 psid to 0-500 psid for 815DT
•   Turndown: 5 to 1
•   Zero and Span Magnetic Targets Located on Casting
•    LCD Display option available
•   EMC (EMI/RFI) Protection
•   NEMA 4X, IP66 Housing
•   FM and ATEX Certified for Hazardous Location in U.S., Canada and Europe
•   Dual Seal Approval

### Cách chọn Cảm biến áp suất 815DT

1. Smart Gauge Pressure Transmitter

Model : 815DT

2. Protocol/Output

Z HART 7 and ModBus RTU 4-20 mA and 1-5 VDC

3. Range
21 0-138 in H2O (0-5 psid)
22 0-415 in H2O (0-15 psid)
23 0-50 psid
24 0-100 psid
25 0-300 psid
26 0-500 psid

4. Process Connection Size

D 316SS, 1/4”NPT(F) Differential Process Connection (HI & LO side)

5. Accessories

IN LCD Display for local indication (see page 6 for more information)
BB Cleaned for industrial oxygen service
DS Dual Seal approval (FM)
NC Compliance to NACE Certification MR0 175/ISO 15156 (Only available with S process connection)
NM INMETRO approved (not available for ranges 13-15)
PK Pipe mounting kit
RR SS tag wired to housing with customer specified information

Example : 815DT- Z07-A-RR IN C1

Cảm biến áp suất 815DT Sor -Sor Inc Việt Nam

Analog Signal 2 wire : 4-20mA
Power Supply : 18-36 VDC
Permissible Temperature : -20 to +70oC
Accuracy : ≤0.1% F.S.
Digits 4½ neg; 5 pos
Units

Blank, kPa, MPa, Pa, bar, mbar, psi, mH20,
mmH20, cmH20, mmHg, Torr, atm, kg, g,
mg, N, kN, oC, oF, K, %RH, %VOL, PPM, %LEL,
pH, m, cm, mm, inch, m/s, Ω (ohm),
k Ω (kohm), mV, V, L/min, M3/hr

Instrument Connection : ½” NPTF
Electrical Conduit Connection : ¾” NPTF
Housing Material Die-casting Aluminum with chromating and chemically resistant paint
Window Material : Glass
Housing Agency Approvals : FM (US and Canada)
CSA
ATEX IEC Ex d IP68
Display Rotation : 350o
Weight (Display only) : ≈2.0 lbs

Bình luận của bạn