Thiết bị đo lưu lượng Riels Turbine flow meter

Xuất xứ:
Italia
Tình trạng:
Mới 100%
Mô tả:
Đại lý Riels Việt Nam
Thành phần:
Flowmeter

Đại lý phân phối thiết bị đo lưu lượng chính hãng Riels tại Việt Nam

Đại lý phân phối Riels Việt Nam | Riels Vietnam

Đồng hồ đo lưu lượng tuabin Riels

RIF200-B/C Turbine flow meters with male inch threads. Chemical liquid, corrosive and aggressive.

  • Measuring principle turbine
  • Measuring ranges up to 400 l/min
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection 1/2" - 3/4" - 1" - 1"¼ - 1"½ - 2" - 2"½ G
  • Materials Stainless steel AISI304, AISI316
  • Temperature up to 150°C
  • Pressure max 25 bar

RIF200-N Turbine flow meters with male inch threads. Chemical liquid, corrosive and aggressive.

  • Measuring principle turbine
  • Measuring ranges up to 400 l/min
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection 1/2" - 3/4" - 1" - 1"¼ - 1"½ - 2" - 2"½ G
  • Materials Stainless steel AISI304, AISI316
  • Temperature up to 150°C
  • Pressure max 25 bar

HM-TCR Turbine flow meters. Solvents, demineralized water, oils

  • Measuring principle turbine
  • Measuring ranges up to 85 l/min
  • Output signal Push Pull / NAMUR - Iout max 20 mA; duty cycle 1:1
  • Process connection G1/4", G3/8", G3/4" 
  • Materials Stainless steel, Carbide
  • Temperature up to 80°C 
  • Pressure max 630 bar

HM-R Turbine flow meters. Demineralized water, solvents, fuel oil

  • Measuring principle turbine
  • Measuring ranges up to 400 l/min
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection G1/4", G3/8", G3/4", G1", G1"1/2
  • Materials Stainless steel, Carbide, Sapphire
  • Temperature up to 350°C 
  • Pressure max 630 bar

HM-F Turbine flow meters. Solvents, demineralized water, oils

  • Measuring principle turbine
  • Measuring ranges from 0.3 to 25,000 l/min in function of the diameter
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection from DN 15 to DN 250
  • Materials Stainless steel, Carbide
  • Temperature up to 350°C - Pressure max 400 bar

HM-TRI Turbine flow meters for pharmaceutical applications.

  • Measuring principle turbine
  • Measuring ranges up to 400 l/min
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection from DN 25 to DN 50
  • Materials Stainless steel, PTFE, FKM
  • Temperature up to 150°C - Pressure max 16 bar

HM-HP Turbine flow meters for high pressure applications.

  • Measuring principle turbine
  • Measuring ranges up to 33 l/min
  • Output signal Frequency, Analogue 4÷20 mA
  • Process connection from DN 25 to DN 50
  • Materials Stainless steel, Tungsten Carbide
  • Temperature up to 350°C - Pressure max 4,000 bar

M9 Insertion turbine flow meter with large graphic display of 4

  • Measuring principle turbine
  • Measuring range 1,6 a 760000 lt/min as a function of the diameter
  • Output signal Current - Open Collector - Relé
  • Process connection fittings PVC - PP - PE - Stainless steel AISI 316
  • Materials PC - Neoprene - EPDM 
  • Temperature max 70°C - Pressure max 10 bar

F3 Flow sensors insertion rotor without display. Flow rate up to 4500 m³/h.

  • Measuring principle turbine
  • Measuring range from 1.6 to 760,000 lt/min as a function of the diameter
  • Output signal Current - Open Collector
  • Process connection fittings PVC - PP - PE - Stainless steel AISI 316
  • Materials PC - Neoprene - EPDM
  • Temperature max 70°C - Pressure max 10 bar

PonyFlow5 Inox Turbine flow meters with display battery powered. Flow rate up to 3,000 l/min.

  • Measuring principle turbine
  • Measuring range 3÷3000 lt/min as a function of the diameter
  • Digital display with batteries without outputs
  • Process connection ½"÷ 4”
  • Materials stainless steel AISI316
  • Temperature up to 60°C - Pressure up to 60 bar

PonyFlow5 Nylon Turbine flow meters with display battery powered. Flow ratea up to 3,000 l/min.

  • Measuring principle turbine
  • Measuring range 3÷3000 lt/min as a function of the diameter
  • Digital display with batteries without outputs
  • Process connection ½"÷ 4”
  • Materials nylon - stainless steel AISI316
  • Temperature up to 60°C - Pressure up to 20 bar

SF800 Infrared flow sensors. Flow rate up 20 lt/min.

  • Measuring principle turbine
  • Measuring range 0.5÷20 l/m
  • Output signal Square Wave
  • Process connection  3/8"  
  • Materials PVDF, VECTRA, VITON, EPDM
  • Temperature up to 90°C - Pressure up to 6 bar

FHKU LCD Flow meters turbine powered for non-viscous liquids. Flow rate up to 30 l/min.

  • Measuring principle turbine powered
  • Measuring range up to 30.00 l/min
  • Output signal NPN, PNP or LCD  display
  • Process connection  1/4" or 1/2"  
  • Materials Arnite - PPS - PA - PVDF 
  • Temperature up to 65°C - Pressure max 10 bar

FCH Flow meters turbine powered for non-viscous liquids. Flow rate up to 10 l/min.

  • Measuring principle turbine powered
  • Measuring range up to 10 l/min
  • Output signal of Hall effect, square wave PNP
  • Process connection  2x1/4" BSP 
  • Materiali corpo in POM. rotori PVDF, guarnizioni FKM
  • Temperature up to 80°C - Pressure max 6 bar

K24 ATEX Digital turbine flow meters for gasoline, diesel, kerosene. Flow rate up to 120 l/min.

  • Measuring principle turbine
  • Measuring range 7÷120 l/m
  • Digital display
  • Process connection 1" BSP or NPT
  • Materials aluminum
  • Temperature max. 60°C - Pressure max. 20 bar

K24 Digital turbine flow meters for diesel. Flow rate up to 120 l/min.

  • Measuring principle turbine
  • Measuring range 7÷120 l/m
  • Digital display
  • Process connection 1" BSP or NPT
  • Materials aluminum, reinforced polyamide
  • Temperature max. 60°C - Pressure max. 20 bar

K24 UREA Digital turbine flow meters for foods, antifreeze, washer fluid. Flow rate up to 100 l/min.

  • Measuring principle turbine
  • Measuring range 5÷100 l/m
  • Digital display
  • Process connection 1" BSP or NPT
  • Materials stainless steel
  • Temperature max. 60°C - Pressure max. 20 bar

AFM/ACM Multiple jet water meters, direct reading. Flow rate up to 30 m³/h.

  • Measuring principle  turbine multiple jet
  • Measuring range 0.03÷30 m³/h
  • Output signal pulses reed optional
  • Process connection ½"÷2"
  • Materials body: cast iron
  • Temperature 30°÷90°C - Pressure up to 16 bar

MWN-NC 130°C Woltmann meters for hot water. Flow rate up to 1000 m³/h.

  • Measuring principle turbine
  • Measuring range 25÷1000 m³/h
  • Mechanical register 
  • Process connection DN40÷DN300 
  • Temperature up to 130°C - Pressure up to PN16

MWN-NK 50°C Woltmann meters for cold water. Flow rate up to 1600 m³/h.

  • Measuring principle turbine
  • Measuring range 25÷1600 m³/h
  • Mechanical register 
  • Process connection DN40÷DN300 
  • Temperature up to 50°C - Pressure up to PN16

WI-N Woltman meters for irrigation and sewage. Flow rate up to 450 m³/h.

  • Measuring principle turbine bypass
  • Measuring range up to 450 m³/h
  • Mechanical register 
  • Process connection from DN50 to DN200
  • Materials Cast iron
  • Temperature up to 50°C

ML 311 Digital computer of thermal energy.

  • Display 122x32
  • Inputs pulses - 4÷20mA - thermoresistors type PT
  • Outputs pulses - 4÷20 mA - RS485 - Mbus
  • Degree of protection IP65
  • Power supply 15÷45 Vac/dc
  • Dimensions 106*104*129 mm
Chia sẻ:
Danh mục sản phẩm
Thống kê truy cập
  • Trực tuyến:
    9
  • Hôm nay:
    408
  • Tuần này:
    1348
  • Tuần trước:
    10636
  • Tháng trước:
    11044
  • Tất cả:
    180929
Video Clip

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 94 2395 184

Email: sale14@tmpvietnam.com

Skype: live:be897f2ae5ef1edc

MẠNG XÃ HỘI :  Thông tin cuối website

© 2018 Tang Minh Phat , all rights reserved