EL1144, EL1202, EL1252, EL1252-0050 Beckhoff

Mô tả:

Đại lý Beckhoff Việt Nam

Xuất xứ:

Đức

Tình trạng:

Mới 100%

Mã sản phẩm:

EL1144, EL1202, EL1252, EL1252-0050

Thông tin sản phẩm
Thông số kỹ thuật

Thiết bị đầu cuối EL1144, EL1202, EL1252, EL1252-0050 Beckhoff

Cung cấp Beckhoff Vietnam

EL1144 | 4-channel digital input terminal 12 V DC

The EL1144 digital input terminal acquires the binary control signals and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal contains four channels that indicate their signal state by means of light emitting diodes.

Technical data	EL1144 \| ES1144
Connection technology	2-/3-wire
Number of inputs	4
Nominal voltage	12 V DC
“0” signal voltage	< 2.4 V
“1” signal voltage	> 8.5 V
Input current	typ. 3.0 mA
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 14 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Configuration	no address or configuration setting
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1202 | 2-channel digital input terminal 24 V DC, TON/TOFF 1 µs

The EL1202 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. It is suitable for particularly fast signals due to its very low input delay. The EtherCAT Terminal can support distributed clocks, i.e. the input data can be monitored synchronously with other data that are also linked to distributed clock terminals. To this end, the user has to switch to terminal version EL1202-0100 (see documentation). The DC accuracy across the system is << 1 µs. For this, the user has to switch the terminal to the EL1202-0100 version (see documentation). The EL1202 contains two channels whose signal state is indicated via LEDs.

Technical data	EL1202 \| ES1202
Connection technology	4-wire
Specification	similar to EN 61131-2, type 3, “0”: -3…5 V DC, “1”: 11…30 V DC, typ. 3 mA input current
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (similar to EN 61131-2, type 3)
“1“ signal voltage	11…30 V (similar to EN 61131-2, type 3)
Input current	typ. 3 mA (similar to EN 61131-2, type 3)
Input filter	typ. < 1 µs
Precision of timestamp in the terminal	10 ns (+ input delay)
Distributed clock precision	<< 1 µs
Input delay TON/TOFF	< 1 µs
Distributed clocks	can be activated, see documentation
Current consumption power contacts	typ. 6 mA + load
Current consumption E-bus	typ. 110 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs
Configuration	no address or configuration setting
Special features	DC can be activated, see documentation
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1252 | 2-channel digital input terminal with timestamping

The EL1252 digital input terminal acquires the fast binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The signals are furnished with a timestamp that identifies the time of the last edge change with a resolution of 1 ns. This technology enables signals to be traced exactly over time and synchronised with the distributed clocks across the system. With this technology, machine-wide parallel hardware wiring of digital inputs or encoder signals for synchronisation purposes is often no longer required. In conjunction with the EL2252 EtherCAT Terminal (digital output terminal with timestamp), the EL1252 enables responses with equidistant time intervals, largely independent of the bus cycle time.

Technical data	EL1252 \| ES1252
Connection technology	4-wire
Specification	similar to EN 61131-2, type 3, “0”: -3…5 V DC, “1”: 11…30 V DC, typ. 3 mA input current
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (similar to EN 61131-2, type 3)
“1“ signal voltage	11…30 V (similar to EN 61131-2, type 3)
Input current	typ. 3 mA (similar to EN 61131-2, type 3)
Input filter	typ. < 1 µs
Resolution timestamp	1 ns (channel 0/1)
Precision of timestamp in the terminal	10 ns (+ input delay)
Distributed clock precision	<< 1 µs
Input delay TON/TOFF	< 1 µs
Distributed clocks	yes
Time resolution signal	1 ns
Current consumption power contacts	typ. 6 mA + load
Current consumption E-bus	typ. 110 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs + 36 byte timestamp
Configuration	no address or configuration setting
Special features	timestamping, latch last edge
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex