Đồng hồ đo áp suất TP300 PCI Instrument

Mô tả:

Đại lý PCI Instrument Việt Nam

Xuất xứ:

USA

Tình trạng:

Mới 100%

Thành phần:

Đồng hồ đo áp

Mã sản phẩm:

TP300

Công Ty Tăng Minh Phát - Đại lý phân phối thiết bị PCI Instrument chính hãng tại Việt Nam

Thông tin sản phẩm
Thông số kỹ thuật

Đại lý phân phối PCI Instrument tại Việt Nam | PCI Instrument Vietnam

TP300 PCI Instrument | Đồng hồ áp suất PCI Instrument

Hygienic Pressure gauge | TP300 + HYGIENIC SEAL

Designed to prevent measurement errors caused by high or fluctuating temperatures
Flush welded diaphragm (free of dead space)
Diaphragm protected against rupture with backup convolution
Helium leak tested to ensure integrity of diaphragm
Suitable for CIP and SIP processes
Autoclave version available up 134ºC ambient

Homogeniser Gauge | TP300 + HOMOGENISER SEAL

Material stainless steel AISI316
Suitable ranges up to 1600 bar
Types to suit APV Gaulin, Tetrapak, Niro Swarvy, Alpha Laval, APV Rannie etc, homogeniser pumps
Seal Fill Fluid: FDA approved

All Stainless Steel Pressure Gauge | TP300 ( Tetropress 300 )

Vacuum to 1,600 bar
Dial sizes 63mm, 80mm, 100mm, 125mm, 150mm, 200mm
Dry/Liquid Filled
Stainless Steel or Monel wetted parts
ATEX 94/9/EC version available
Autoclave version available up 134ºC ambient

Micro Switch for Gauge | TP300 + ZH

Reduced lag on opening a circuit
Single or double action
Switches 10% and 75% of full scale
DIN43650 connector option

Contact Switch Pressure Gauge | TP300 + Mxx

Types: Magnetic, Inductive, Electric
Actions Switches: single, double or triple
Built in option available

Pressure gauge fitted with min / max drag pointer | TP300 + MAX POINTER

The TP300 series pressure gauge can come fitted with a min / max drag pointer. The red drag pointer follows the regular pointer on increasing pressure and remains at the highest point until it is reset by a key on the front of the window. The white drag pointer indicates the lowest pressure or vacuum. Drag pointers are best suited for dry gauges.

Gauge specifications - Based on TP300 model (see related datasheet for more info)

Diameters: 63 -100 -150 mm
Case and ring: st. st. 304, bayonet type ring
Protection degree: IP65
Window: acrylic
Movement: st.st., reinforced
Dial: aluminium with black numerals on white back- ground
Pointer: aluminium, black painted, adjustable
Blow out: neoprene, upper
Mounting:

Type A bottom connection, direct mounting

Type D back connection, direct mounting

Type DC center back connection, direct mounting

Accuracy: class 1, acc. to EN 837 (class 1,6 for DN63) at 20 °C
Ambient temperature limit: -40/+60 °C

Diaphragm seal specifications

Body material: AISI 316L
Nut material: AISI 304
Wetted parts and diaphragm material: AISI 316L

Options

Diaphragm with surface roughness Ra <0.38 µm for high cleanability in CIP process
Diaphragm connected to pressure gauge using a cooling tower or capillary
Autoclave version for up 134ºC ambient
Glycerine filling for ambient temperature -25/+60 °C
Silicone oil filling for ambient temperature -40/+60 °C
Electrical contacts (see related datasheet)
Acrylic window with max value pointer resettable from front