Công Ty Tăng Minh Phát - Chuyên cung cấp giải pháp và thiết bị dùng trong công nghiệp

Công tắc giật dây, công tắc lệch băng thường được dùng trong các nhà máy công nghiệp. Khi có xảy ra sự cố không an toàn trong hệ thống, thì người dùng có thể ngừng hoạt động của băng tải từ bất kì vị trí nào.

Thiết bị bảo vệ băng tải | Công tắc giật dây dừng khẩn cấp

1. Công tắc giật dây Matsushima

Matsushima - Japan

Pull Cord Switch is an emergency switch to stop the belt conveyor instantly when an accident happens. Since the Pull Cord Switch is so designed that it should be installed at the side of belt conveyor and the pull cord should be mounted along conveyor, the switch can be actuated at any position

• Belt Conveyor Emergency-stop Switch
• Reset system: Self-reset or Manual-reset
• Required force of pull cord 49±9.8N(5 ± 1kgf)

Model : ELAW-21, ELAW-31, ELAW-61

2. Công tắc giật dây Kiepe

Kiepe - Đức

Conveyor belt systems must be able to be switched off along the conveyor path during emergencies. Therefore Pull Rope Switches are prescribed by standards as a supplementary protection measure.

PAS Kiepe 

• PBT-Plastic - Pull Rope Lenght: up to 1x30m 
• 1 NC

LRS Kiepe

• Aluminum - Pull Rope Length: up to 1x 20m
• LRS 004       2NC / 1NO (positive-break contacts)
• LRS 022       2NC / 2NO (positive-break contacts)
• LRS 031       3NC / 2NO (positive-break contacts)

PRS Kiepe

• PBT-Plastic - Pull Rope Length: 2x50m
• 2 NC / 1 changeover contact (positive-break contacts)

Hen 001, Hen 002

• Aluminum - Pull Rope Length: up to 2x 50m
• 3NC/ 3NO (positive-break contacts)

HEN 211 Kiepe

• Aluminum - Pull Rope Length: up to 2x 50m
• 2NC and 1NO for BUS-control (positive-break contacts)

HEN 221/231 Kiepe

• Aluminum - Pull Rope Length: up to 2x 50m 
• SafetyBus-Signal

NTS Kiepe

• BMC-Plastic - Pull Rope Length: up to 2x 50m
• 3 NC / 3 NO (positive-break contacts)

SEG Kiepe

• Cast iron - Pull Rope Length: up to 2x 50m
• 3 NC / 3 NO (positive-break contacts)

3. Công tắc giật dây Sitec

Sitec - Đức

Pull wire emergency stop switches for safe conveying systems

With the pull wire emergency stop switches from SiTec, an emergency stop can be triggered at any point along the conveyor belts. This makes work easy and safe !

Model : SNA, SND, SNSA

4. Công tắc giật dây Finetek

Finetek - Taiwan

SRS Series Safety Cable Pull Switch

• Conventional belt conveyors
• Underground, cable supported belt conveyors
• Stacker/reclaimer conveyors
• Ship loading/unloading systems
• Tripper and shuttle conveyors
• Bucket elevator speed safety management
• Many others

Model : SRT20000, SRT2007D

Công tắc báo lệch băng tải Finetek - SRT Series Conveyer Belt Misalignment Switch

The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel.  These safety devices include:

– SRT belt misalignment switch
– SRS safety stop switch
– ED series speed monitor

Ứng dụng :

• Conventional belt conveyors
• Underground, cable supported belt conveyors
• Stacker/reclaimer conveyors
• Ship loading/unloading systems
• Tripper and shuttle conveyors
• Bucket elevator speed safety management
• Many others

INDUSTRY

• Aggregate processing
• Mining
• Cement production
• Grain distribution/processing
• Terminal operations (loading/unloading)

Công tắc giật dây Finetek - SRS Series Safety Cable Pull Switch

The SRS/SRT/ED belt conveyor safety products use various electromechanical and electronic technology to protect equipment and personnel.  These safety devices include:

– SRT belt misalignment switch
– SRS safety stop switch
– ED series speed monitor

USE

• Conventional belt conveyors
• Underground, cable supported belt conveyors
• Stacker/reclaimer conveyors
• Ship loading/unloading systems
• Tripper and shuttle conveyors
• Bucket elevator speed safety management
• Many others

INDUSTRY

• Aggregate processing
• Mining
• Cement production
• Grain distribution/processing
• Terminal operations (loading/unloading)