EK1101-0010 Beckhoff | Thiết bị đầu nối Beckhoff
Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng
Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff
EK1101-0010 | EtherCAT Coupler with ID switch, Extended Distance
The EK1101-0010 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101-0010 coupler, any number of EtherCAT Terminals and a bus end cap. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.
Using the extended distance connection, distances of up to 300 m can be bridged between two Extended Distance Couplers. If only one connection of the two Couplers is configured for Extended Distance, the maximum distance between the stations is 100 m.
The EK1101-0010 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.
| Technical data | EK1101-0010 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification |
| Data transfer medium | Ethernet/EtherCAT cable (min. Cat. 5), shielded |
| Distance between stations | max. 300 m (copper, Cat. 5, 4-wire) |
| Number of EtherCAT Terminals | up to 65,534 |
| Type/number of peripheral signals | max. 4.2 GB addressable I/O points |
| Number of configurable IDs | 4096 |
| Protocol | EtherCAT |
| Delay | approx. 1 µs |
| Data transfer rates | 100 Mbit/s |
| Configuration | not required |
| Bus interface | 2 x RJ45 |
| Power supply | 24 V DC (-15 %/+20 %) |
| Current consumption from US | 90 mA + (∑ E-bus current/4) |
| Current consumption from UP | load |
| Current supply E-bus | 2000 mA |
| Power contacts | max. 24 V DC/max. 10 A |
| Electrical isolation | 500 V (power contact/supply voltage/Ethernet) |
| Weight | approx. 105 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Approvals | CE |
- WISE CONTROL
- REDLION
- TDK LAMBDA
- MATSUSHIMA
- GASTRON
- AT2E
- KELLER ITS
- TECLOCK
- IBA
- SCHENCK PROCESS
- AUTROL
- BECKHOFF
- BIRCHER
- BAUMUELLER
- BROOK INSTRUMENT
- BRONKHORST
- CEIA
- CEMB
- CS INSTRUMENTS
- COMET SYSTEM
- DWYER
- ELCO HOLDING
- EUROSWITCH
- ENDRESS + HAUSER
- FIREYE
- FOX THERMAL
- FINETEK
- GEMU
- IPF ELECTRONIC
- INTORQ
- KEOFITT
- KIEPE
- KOMETER
- KROHNE
- LABOM
- MARK-10
- METRIX VIBRATION
- MKS ANLASSER
- MAGNETEK
- PCI INSTRUMENT
- OHKURA
- PORA
- PAVONE SISTEMI
- RIELS
- ROTORK
- SORINC
- SHINHO SYSTEM
- STAUBLI
- SPOHN+BURKHARDT
- TEMAVASCONI
- TEK-TROL
- TEMPSENS
- VEGA
- YOUNGTECH
- ZAMA SENSOR
- VALPES
- LAPAR
- ASHCROFT
- MAXCESS
- NORGREN
- OKAZAKI
- MINIMAX
- UTILCELL
- KRACHT
- GÜNTHER
- ROSEMOUNT
- AROMANIKKI
- MEDENUS
- SAUTER
- HELUKABEL
-
Trực tuyến:22
-
Hôm nay:2164
-
Tuần này:86517
-
Tuần trước:16398
-
Tháng trước:96725
-
Tất cả:3205922