Nhà cung cấp thiết bị Kometer chính hãng tại Việt Nam

Đồng hồ đo lưu lượng dạng Thermal Mass

KMSG-9000MI  is a thermal mass flow meter with a separate drive section and indicator that displays the flow rate. It is specially designed for the case that it is difficult to check the flow rate in the field. The best technology intensive flowmeters are especially suitable for difficult field conditions or inaccessible places.

 This product can be applied not only to various gases distributed in the atmosphere, but also to corrosive gases and gases with low specific gravity, which makes it difficult to measure, so it can be applied to various industrial sites such as power plants, semiconductor industry, petrochemical field and semiconductor industry. There is.

 KMSG-9000-MI has no moving parts, so it is durable, has a long service life and offers a much higher flow rate (200: 1) than a mechanical flow meter. It can also be used in places with high vibration and noise. The temperature and pressure are automatically calibrated, so it is suitable 

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo lưu lượng khí KMSG-9000MI Kometer appeared first on thietbicongnghiepnang.com.

Đại lý cung cấp Kometer tại Việt Nam, Thiết bị đo lưu lượng dạng Thermal Mass

Nhà cung cấp thiết bị Kometer chính hãng tại Việt Nam

Thiết bị đo lưu lượng Thermal Kometer

KMSG-9000MI  is a thermal mass flow meter with a separate drive section and indicator that displays the flow rate. It is specially designed for the case that it is difficult to check the flow rate in the field. The best technology intensive flowmeters are especially suitable for difficult field conditions or inaccessible places.

 This product can be applied not only to various gases distributed in the atmosphere, but also to corrosive gases and gases with low specific gravity, which makes it difficult to measure, so it can be applied to various industrial sites such as power plants, semiconductor industry, petrochemical field and semiconductor industry. There is.

 KMSG-9000-MI has no moving parts, so it is durable, has a long service life and offers a much higher flow rate (200: 1) than a mechanical flow meter. It can also be used in places with high vibration and noise. The temperature and pressure are automatically calibrated, so it is suitable 

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo lưu lượng khí KMSG-9000MT Kometer appeared first on thietbicongnghiepnang.com.

Tăng Minh Phát - Chuyên cung cấp thiết bị đo lưu lượng Kometer

Nhà cung cấp thiết bị Kometer chính hãng tại Việt Nam

Đồng hồ đo lưu lượng khí nén Kometer

KMSG-8000MI  is a pipe insertion type thermal mass flow meter designed to be used for existing pipe regardless of pipe size. It is convenient because there is no need for a separate piping design for measurement, and it has no moving parts and low pressure loss.

 This product can be applied not only to various gases distributed in the atmosphere, but also to corrosive gases and gases with low specific gravity, which makes it difficult to measure, so it can be applied to various industrial sites such as power plants, semiconductor industry, petrochemical field and semiconductor industry. There is.

 KMSG-8000-MI has no moving parts, so it is durable, has a long service life and offers a much higher flow rate (200: 1) than a mechanical flow meter. It can also be used in places with high vibration and noise. The temperature and pressure are automatically calibrated, so it is suitable 

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo lưu lượng khí KMSG-8000MI Kometer appeared first on thietbicongnghiepnang.com.

Đại lý phân phối thiết bị hãng Kometer tại Việt Nam

Nhà cung cấp thiết bị Kometer chính hãng tại Việt Nam

Kometer Việt Nam

KMSG-8000MT   is a thermal mass flow meter specially designed for flow measurement in the process using gas as a fluid. The best technology-intensive flowmeter is especially suitable for the field that requires high accuracy and various self-diagnosis.

 This product can be applied not only to various gases distributed in the atmosphere, but also to corrosive gases and gases with low specific gravity, which makes it difficult to measure, so it can be applied to various industrial sites such as power plants, semiconductor industry, petrochemical field and semiconductor industry. There is.

 KMSG-8000-MT has no moving parts, so it is durable, has a long service life and offers a much higher flow rate (200: 1) than a mechanical flow meter. It can also be used in places with high vibration and noise. The temperature and pressure are automatically calibrated, so it is suitable 

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo lưu lượng khí KMSG-8000MT Kometer appeared first on thietbicongnghiepnang.com.

Nhà phân phối thiết bị đo lưu lượng khí CS Instruments

Đại lý phân phối CS Instruments Việt Nam

Máy đo lưu lượng khí gas cầm tay CS Instruments

PI 500 - Portable chart recorder for flow measurement

• Flow measurement
• Pressure-/ vacuum measurement
• Temperature measurement
• Moisture/ dew point measurement 

The graphic indication of coloured measurement curves is inimitably. Up to 100 million measured values can be stored with date and name of measuring site. The measured values can be transferred to the computer by means of a USB stick. The data can be comfortably evaluated with the CS Soft Basic software. Measured data and service reports can be issued easily and quickly. The following sensors can be connected to the freely configurable sensor input of PI 500:

• Pressure sensors (high and low pressure)
• Flow sensors, VA 500 / VA 520
• Temperature sensors Pt 100, Pt 1000 / 4...20 mA
• Dew point sensors FA 510 / FA 515
• Effective power meters
• Opitonal third-party sensors with the following signals: 0...1/10 V, 0/4...20 mA, Pt 100, Pt 1000, pulse, Modbus

The special features of PI 500

• Universal sensor input for lots of common sensor signals
• Internal rechargeable Li-Ion batteries (approx. 12h continuous operation)
• 3.5" graphic display / easy operation via touch screen
• Integrated data logger for storage of the measured values
• USB interface for reading out via USB stick
• International: Up to 8 languages selectabel

Xem thêm chi tiết : TẠI ĐÂY 

The post Máy đo khí cầm tay PI 500 CS Instruments appeared first on thietbicongnghiepnang.com.

Cảm biến đo độ động sương trong thiết bị khí nén của hãng CS Instruments

Đại lý phân phối CS Instrument

FA 500 - Dew point sensor with integrated display and alarm relay

Dew point sensor FA 500 from -80 to 20°Ctd

FA 500 is the ideal dew point sensor with integrated display and alarm relay for refrigeration, membrane and desiccant driers.

Special features:

• NEW: Modbus-RTU interface

• NEW: Higher resolution of sensor signal caused by the improved evaluation electronics

• NEW: Sensor diagnosis on site with a portable device or CS Service Software

• Integrated display

• Threshold value adjustable via keypad alarm relay (max. 60 VDC, 0,5 A)

• Pressure-tight up to 350 bar (special version)

• Extreme long-term stability

• Quick response time

• 4...20 mA analogue output

• 2 versions: Refrigeration driers and desiccant driers

Easy operation via keys at the display

• The integrated display shows the dew point in big figures as well as further humidity parameters on two more display pages. By means of the arrow key it can be browsed between the display pages.

• The alarm threshold value for the integrated relay can be entered via the keys. Apart from the alarm threshold it is also possible to enter the hysteresis freely.

• The 4...20 mA analogue output can be scaled freely resp. also allocated to one further parameter, e.g. g/m³.

• If requested the sensor can also reckon back from the measured pressure dew point to the atmospheric dew point upon entering the system pressure of the compressed air plant and the reference pressure (atmospheric pressure).

Xem thêm chi tiết : TẠI ĐÂY  

The post Cảm biến điểm sương FA 500 CS Instruments appeared first on thietbicongnghiepnang.com.

Nhà cung cấp thiết bị CS Instruments chính hãng tại Việt Nam

Đại lý CS Instruments Việt Nam

Thiết bị đo điểm sương CS Instruments

FA 550 - Dew point sensor in robust die-cast aluminum housing

Robust dew point sensor for compressed air and gases

The FA 550 is ideally suited for outdoor dew point measurement and reliably determines dew points even under harsh industrial conditions.

Application examples

• Dew point measurement in compressed air systems after adsorption dryers, membran dryers or refrigeration dryer
• Residual moisture measurement and dew point measurement in gases such as: oxygen, nitrogen, argon, hydrogen, natural gas, biogas...

Special features of the dew point sensor FA 550:

• Robust, waterproof die-cast aluminum housing, IP 67
• Alarm relay - limit value adjustable via buttons (max 60VDC, 0.5 A)
• 4 ... 20 mA analog output
• Optional: 2 pieces 4 ... 20 mA analog output e.g. for dew point and temperature
• Extremely long-term stable
• Fast adjustment time
• Pressure resistant up to 500 bar (optional)
• NEW: Modbus RTU interface
• NEW: Ethernet interface (optional)
• NEW: Higher resolution of the sensor signal due to improved evaluation electronics
• NEW: Sensor diagnosis on-site with handheld device or CS Service Software
• Readable via Modbus: pressure dew point [° Ctd.], temperature [° C], rel. humidity [% RH], abs. humidity [g / m3], degree of humidity [g / m3], moisture content V / V [ppmV / V], Partial vapor pressure [hPa], atmospheric dew point [° Ctd.atm]

Xem thêm chi tiết : TẠI ĐÂY  

The post Cảm biến điểm sương FA 550 CS Instruments appeared first on thietbicongnghiepnang.com.

Tăng Minh Phát - Nhà cung cấp giải pháp và thiết bị đo lưu lượng chính hãng Riels

Đồng hồ đo lưu lượng dạng điện từ Riel | Nhà phân phối Riels Vietnam

RIF180 Electromagnetic flowmeter | Thiết bị đo lưu lượng kiểu điện từ

RIF180 Electromagnetic flowmeter insertion. For conductive liquids

• Measuring principle electromagnetic
• Measuring range as a function of the diameter
• Accuracy ± 0,5 % v.l. 
• Connection insertion with flange or theaded
• Materials stainless steel AISI304 - Electrodes steel AISI316L
• Temperature -25÷80°C
• Pressure PN16

The electromagnetic flowmeterRiels RIF180 using Faraday's law of electromagnetic induction to measure the flow of electrically conducting liquids, according to which a conductor crossing a magnetic field generates a potential oriented perpendicularly to the field itself.
 

Characteristics

• Compact, light weight, easy installation and low cost.
• Low power consumption: only 9 watts (with 24 Vdc input).
• It does not require a previous selection of the type of fluid. If the fluid to be measured is conductive and non-magnetic, measures stable and error-free flow are possible.
• Pressure drop negligible, there is no appreciable loss of load since the meter penetrates into the pipe only for a thirteenth diameter.
• Linear relationship between the flow rate and the output signal. You can perform accurate measurements over a wide range of flow rates.
• Measurement not influenced by the parameters of the fluids, the precision of the measurement is not affected by the fluid temperature, pressure, density and type of fluid.

Đồng hồ đo lưu lượng Riels

Xem thêm chi tiết : TẠI ĐÂY

The post RIF180 Riels | Thiết bị đo lưu lượng chất lỏng Riels appeared first on thietbicongnghiepnang.com.

Nhà phân phối thiết bị đo lưu lượng CS Instruments chính hãng tại Việt Nam

Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instruments VA570 

VA 570 - Flow meter with integrated measuring section

• Flow meter VA 570 is supplied with an integrated measuring section for compressed air and gas pipes. The measuring sections are available in flanged version or with R resp. NPT thread.
• A special feature is the removable measuring head. So the measuring unit can be removed easily and quickly for calibration or cleaning purposes without having to dismount the measuring section intricately. During this period the measuring section is sealed by a closing cap (accessory).
• The screwing with centring device ensures that the sensor is positioned accurately in the centre when screwing it into the measuring section furthermore it grants an exact positioning in the flow direction. This avoids unnecessary measuring faults. 

Robust design for demanding industrial applications

The new flow meters VA 550/ 570 work according to the calorimetric measuring principle. Therefore an additional temperature and pressure compensation is not necessary.

Due to its robust design, the aluminum die cast housing, the robust sensor tip made from stainless steel 1,4571, the new VA 550/ 570 are suitable for demanding industrial applications. An ATEX version is available for applications in explosive areas. For flow measurement e. g. of natural gas there is a version with a DVWG admission.

Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This allows very precise and fast measurements with a wide temperature range of up to 180 °C (resp. 350 °C). The measuring span is 1...1000 and enables therefore measurements in very low as well as in very high flow speeds of up to 224 m/s.

Simple operation and flexible interface

VA 550/ 570 has an integrated Modbus output as a standard with which all parameters like Nm³/h, Nm³, Nm/s, Nl/min, Nl/s, kg/h, kg/min, ft/min, °C etc. can be transferred. All parameters can be adjusted directly at the instrument (via display) or via the PI 500 hand-held measuring instrument resp. the Service Software. Of course there are also 2 x 4...20 mA analogue outputs available for flow and temperature and a galvanically isolated pulse output for the total consumption.

A remote diagnosis can be carried out via Modbus and all relevant parameters can be checked and changed if necessary. So it is possible to change e. g. the gas type, the inner diameter, the scaling and so on or the zero point resp. the leak flow volume suppression in case of changed process conditions.

Via remote diagnosis and status update e. g. temperature exceeding, failures of the flow sensor or the calibration date can be determined.

The post Đồng hồ đo lưu lượng khí CS Instruments VA570 appeared first on thietbicongnghiepnang.com.

Đại lý phân phối hãng CS Instruments tại Việt Nam

Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instrumen VA550 

Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

Special mechanical features:

• Robust impact-proof aluminum die cast housing for the outdoor area IP 67
• All medium-touching parts made from stainless steel 1,4571
• As immersion sensor suitable for 3/4“ up to DN 500
• On request with ATEX approval ATEX II 2G Ex d IIC T4
• On request with DVGW approval for natural gas (up to 16 bar)
• Pressure range up to 50 bar, special version up to 100 bar
• Temperature range up to 180 °C
• No moving parts, no wearout
• Sensor tip very robust, easy to clean
• Easy mounting and dismounting under pressure via 1/2“ ball valve
• Housing twistable, display twistable by 180°
• Safety ring for mounting and dismounting under pressure
• Depth scale for precise installation

Special measurement technology features:

• 4 values in the display: Nm³/h, Nm³, Nm/s, °C units freely adjustable
• Min/max values and daily/hours/minutes average values freely adjustable
• All measured values, settings like gas type, inner diameter, serial number and so on retrievable via Modbus RTU
• Comprehensive diagnosis functions readable at the display or remote access via Modbus like e. g. exceeding of max/min values °C, calibration cycle, error codes, serial number, all parameters readable and adjustable
• Notification in case of exceeding of the calibration cycle
• Standard version accuracy 1.5 % of m.v. ± 0.3 % of f.s.
• Precision version accuracy 1.0 % of m.v. ± 0.3 % of f.s. up to
• 40 calibration points with certificate
• Measuring span of 1 : 1000 (0.1 up to 224 m/s)
• Configuration and diagnosis via display, hand-held instrument
• PI 500, PC service software on-site
• Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable
• Reference conditions °C and mbar/hPa freely adjustable
• Zero-point adjustment, leak flow volume suppression
• Pressure loss negligible
• Flow measurement in both directions via flow direction switch

The post Đồng hồ đo lưu lượng CS Instruments VA 550 appeared first on thietbicongnghiepnang.com.

Nhà phân phối thiết bị đo lưu lượng CS Instruments chính hãng tại Việt Nam

Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instruments VA520 

Đồng hồ đo lưu lượng khí nén CS Instruments

VA 520 - Mass Flow Meter for Compressed Air and Gas 

• Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements.
• Due to the new evaluation electronics, all VA 520 models have an integrated Modbus output as a standard. So all parameters can be easily transferred via Modbus. 
• Due to its compact design it is possible to monitor all compressed air systems from the compressor to the smallest compressed air tool (1/4“ to 2 inch) with the new mass flow sensor VA 520. VA 500 flow sensors are available for larger pipe diameters from DN 50 to DN 300. Apart from compressed air also other gases like e.g. nitrogen, oxygen and CO2 can be measured.

The post Đồng hồ đo lưu lượng CS Instruments VA 520 appeared first on thietbicongnghiepnang.com.

Nhà cung cấp thiết bị đo lưu lượng Cs Instruments chính hãng tại Việt Nam

Đại lý phân phối CS Instruments chính hãng | CS Instrument Vietnam

Flow meter CS Instruments VA500 

Đồng hồ đo lưu lượng dạng thermal mass | Cảm biến lưu lượng khí CS Instruments

VA 500 - Flow sensor for compressed air and gases

Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000.

1. Thông số kĩ thuật

2. Order Code VA 500

3. Bảng tra lưu lượng VA 500

4. Cách lắp đặt cảm biến lưu lượng CS Instruments 

Xem thêm về thiết bị đo lưu lượng kiểu Thermal Mass : TẠI ĐÂY

The post Đồng hồ đo lưu lượng CS Instruments VA 500 appeared first on thietbicongnghiepnang.com.

Nhà phân phối thiết bị đo lưu lượng CS Instruments chính hãng tại Việt Nam

Đại lý phân phối thiết bị đo lưu lượng CS Instrument | CS Instrument Vietnam

Thiết bị đo lưu lượng CS Instruments | Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

Special mechanical features:

• Robust impact-proof aluminum die cast housing for the outdoor area IP 67

• All medium-touching parts made from stainless steel 1,4571
• As immersion sensor suitable for 3/4“ up to DN 500
• On request with ATEX approval ATEX II 2G Ex d IIC T4
• On request with DVGW approval for natural gas (up to 16 bar)
• Pressure range up to 50 bar, special version up to 100 bar
• Temperature range up to 180 °C
• No moving parts, no wearout
• Sensor tip very robust, easy to clean
• Easy mounting and dismounting under pressure via 1/2“ ball valve
• Housing twistable, display twistable by 180°
• Safety ring for mounting and dismounting under pressure
• Depth scale for precise installation

Special measurement technology features:

• 4 values in the display: Nm³/h, Nm³, Nm/s, °C units freely adjustable
• Min/max values and daily/hours/minutes average values freely adjustable
• All measured values, settings like gas type, inner diameter, serial number and so on retrievable via Modbus RTU
• Comprehensive diagnosis functions readable at the display or remote access via Modbus like e. g. exceeding of max/min values °C, calibration cycle, error codes, serial number, all parameters readable and adjustable
• Notification in case of exceeding of the calibration cycle
• Standard version accuracy 1.5 % of m.v. ± 0.3 % of f.s.
• Precision version accuracy 1.0 % of m.v. ± 0.3 % of f.s. up to
• 40 calibration points with certificate
• Measuring span of 1 : 1000 (0.1 up to 224 m/s)
• Configuration and diagnosis via display, hand-held instrument
• PI 500, PC service software on-site
• Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable
• Reference conditions °C and mbar/hPa freely adjustable
• Zero-point adjustment, leak flow volume suppression
• Pressure loss negligible
• Flow measurement in both directions via flow direction switch

Các sản phẩm khác của CS Instrument : thiết bị đo lưu lượng, cảm biến áp suất CS Instruments, cảm biến lưu lượng 

The post Đồng hồ đo lưu lượng CS Instruments VA550 appeared first on thietbicongnghiepnang.com.

Công Ty Tăng Minh Phát - Đại lý phân phối cảm biến áp suất Cs Instruments tại Việt Nam

Đại lý phân phối CS Instrument tại Việt Nam | CS Instruments Vietnam

Cảm biến áp suất khí CS Instruments | Pressure sensors for compressed air and gas 

Pressure monitoring in compressed air and gas systems helps to significantly reduce energy consumption. Only a few types of machines actually require compressed air with more than 6 bar overpressure. A reduction in the nominal pressure reduces both the power consumption and the leakage losses and increases the service life of the compressor. Electricity savings in the range of 6 - 8% can be achieved by a reduction of the nominal pressure by only 1 bar.

The smaller the pressure drop across the filter, the less high the nominal pressure must be set. If the pressure drop across the filters is greater than 0.3 bar, the filters should be replaced. Our proven differential pressure sensors and pressure gauges are ideal to monitor those figures continuously.

Cảm biến chênh áp CS Instrument | Differential pressure probe for testing filter performance

• Minimizes pressure drops (loss in energy)
• Allows exchange of filter elements according to the differential pressure specifications of the manufacturer (activated carbon filter excluded)
• Ensures maximum performance of the filter elements and thus optimal compressed air quality level over time

Cảm biến áp suất CS 10, CS 16 CS Instruments

Standard pressure sensor CS 10 and CS 16 for pressure ratio 0...10 and 0...16 bar measures with accuracy of full scale 1%. For more exactly measurement in the same pressure ratio we offer the CS 10/ CS 16 sensors with accuracy of full scale 0,5%.

• Output signal: 4...20 mA, 2-Wire
• Power supply: 8...30 VDC

Cảm biến áp suất CS 40 CS Instruments

Standard pressure sensor CS 40 for pressure ratio 0...40 bar measures with accuracy of full scale 1%. For more exactly measurement in the same pressure ratio we offer the CS 40 sensor with accuracy of full scale 0,5%.

• Output signal: 4...20 mA, 2-Wire
• Power supply: 8...30 VDC

Cảm biến áp suất CS 100 CS Instrument

Standard pressure sensor CS 100 for pressure ratio 0...100 bar measures with accuracy of full scale 0,5%.

• Output signal: 4...20 mA, 2-Wire
• Power supply: 8...30 VDC

Cảm biến áp suất CS 250 CS Instrument

Standard pressure sensor CS 250 for pressure ratio 0...250 bar measures with accuracy of full scale 0,5%.

• Output signal: 4...20 mA, 2-Wire
• Power supply: 8..30 VDC

Cảm biến áp suất CS 400 CS Instrument

Standard pressure sensor CS 400 for pressure ratio 0...400 bar measures with accuracy of full scale 0,5%.

• Output signal: 4...20 mA, 2-Wire
• Power supply: 8...30 VDC

Các sản phẩm khác của CS Instrument : thiết bị đo lưu lượng, đồng hồ đo lưu lượng, cảm biến lưu lượng 

The post Cảm biến áp suất CS Instruments | Pressure sensors appeared first on thietbicongnghiepnang.com.

Nhà phân phối thiết bị đo lưu lượng CS Instruments chính hãng tại Việt Nam

Đại lý phân phối thiết bị đo lưu lượng CS Instrument | CS Instrument Vietnam

Đồng hồ đo lưu lượng CS Instrument | CS Instrument Việt Nam

VA 525 CS Instrument | Flow sensor with integrated flow straightener / no inlet sections necessary

Thiết bị đo lưu lượng khí CS Instrument

The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. Due to its reasonable price and modern digital interfaces this compact in-line flow sensor is used when many machines (compressed air consumers) are to be integrated as easily as possible into an energy monitoring network.

The high-contrast, integrated display also displays the current values rotated by 180° if desired (very useful for overhead installation). Depending on the configuration, two of the following values can be displayed:

• Current consumption in m³/h, l / min, ...
• Total consumption (meter reading) in m³, l, kg
• Temperature measurement
• Optional: Pressure measurement

Special advantages of the flow sensor VA 525

• Compact, small design - for use in machines, behind maintenance unit at the end user
• Optionally with classic analogue signals (4...20 mA and pulse) or digital interfaces such as Modbus RTU, Ethernet (also PoE), M-Bus
• All interfaces are programmable via the display

VA 550 CS Instrument | Flow meter for heavy duty industrial applications

The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500.

VA 570 CS Instrument - Flow meter with integrated measuring section

Flow meter VA 570 is supplied with an integrated measuring section for compressed air and gas pipes. The measuring sections are available in flanged version or with R resp. NPT thread.

Flow sensor for compressed air and gas - VA 500

Contrary to the previously used bridge circuit the newly developed evaluation electronics of our flow sensor records all measured values digitally. This leads to a better accuracy also in case of large measuring spans of 1:1000.

VA 520 - Mass Flow Meter for Compressed Air and Gas 

Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements

The post Thiết bị đo lưu lượng CS Instruments | Flow meter Cs Instruments appeared first on thietbicongnghiepnang.com.

Nhà phân phối Flowmeter Fox Thermal Instruments chính hãng tại Việt Nam

Fox Thermal Vietnam

FT1 Fox Thermal | Đồng hồ đo lưu lượng khí Fox Thermal

Fox Thermal Model FT1 Thermal Gas Mass Flow Meter

The Model FT1 is a multiple award winner due to its innovative design elements such as the DDC-Sensor™ technology platform that allows it to operate using the Gas-SelectX® gas menu selection tool. 

Key Features:

• Insertion & Inline Styles
• DDC-Sensor™ Technology
• Gas-SelectX® Gas Selection Menu
• Zero CAL-CHECK® Calibration Validation
• Scroll down for more features/benefits!

Industrial Applications:

• Wastewater Aeration
• Natural Gas Monitoring
• Pure Gas Monitoring
• Biogas Monitoring

The post Thiết bị đo lưu lượng FT1 Fox Thermal appeared first on thietbicongnghiepnang.com.

Nhà phân phối Flowmeter Fox Thermal Instruments chính hãng tại Việt Nam

Fox Thermal Vietnam

FT2A Fox Thermal | Đồng hồ đo lưu lượng khí Fox Thermal

Fox Thermal Model FT2A Thermal Gas Mass Flow Meter

The Model FT2A has a large selection of communication protocol options available intrinsically (without any other equipment). Options include: BACnet MS/TP, RS485 Modbus RTU, Profibus-DP, DeviceNet, or Ethernet Modbus TCP. 

Key Features:

• Insertion, Inline & Remote Styles
• USB Port, free FT2A View™ Software
• 2 x 4-20mA outputs
• FM/FMc approvals
• Scroll down for more features/benefits!

Industrial Applications:

• Aluminum & Steel Production
• Chemical Plants
• Glass & Ceramics Production
• Pulp & Paper Production

Thiết bị đo lưu lượng

The post Thiết bị đo lưu lượng FT2A Fox Thermal appeared first on thietbicongnghiepnang.com.

Nhà phân phối Flowmeter Fox Thermal Instruments chính hãng tại Việt Nam

Fox Thermal Vietnam | Thiết bị đo lưu lượng

FT3 Fox Thermal | Đồng hồ đo lưu lượng Fox Thermal

Thiết bị đo lưu lượng Fox, thiết bị đo lưu lượng nước Fox Thermal

Fox Thermal Model FT3 Thermal Gas Mass Flow Meter

The Model FT3 was designed with our oil and gas customers in mind. This meter is Quad O (OOOO) compliant and is perfect for use in flare gas applications along with other fuel gas measurement.

Key Features:

• Insertion, Inline & Remote Styles
• Modbus or HART options
• Calibration Validation
• FM/FMc, ATEX and IECEx approvals
• Scroll down for more features/benefits!

Applications:

• Textile Mills
• Sub-metering
• Check meters
• Shield gas monitoring

The post Thiết bị đo lưu lượng FT3 Fox Thermal appeared first on thietbicongnghiepnang.com.

Nhà phân phối Flowmeter Fox Thermal Instruments chính hãng tại Việt Nam

Fox Thermal Vietnam | Thiết bị đo lưu lượng

FT4A Fox Thermal | Đồng hồ đo lưu lượng khí Fox Thermal

Fox Thermal Model FT4A Thermal Gas Mass Flow Meter

The Fox Thermal Model FT4A was the first meter to use the expanded Gas-SelectX® gas selection menu and the 3rd Generation DDC-Sensor™ design.
Features :

• Insertion & Inline Styles
• DDC-Sensor™ Technology
• Gas-SelectX® Gas Selection Menu
• CAL-V™ Calibration Validation
• Scroll down for more features/benefits!

Applications:

• Gas Separators
• Power Plants
• VRU (Vapor Recovery Units)
• Green Completions

The post Thiết bị đo lưu lượng FT4A Fox Thermal appeared first on thietbicongnghiepnang.com.

Nhà phân phối Flowmeter Fox Thermal Instruments chính hãng tại Việt Nam

Fox Thermal Vietnam | Thiết bị đo lưu lượng

FT4X Fox Thermal | Đồng hồ đo lưu lượng khí Fox Thermal

Fox Thermal Model FT4X Thermal Gas Mass Flow Meter

The Fox Thermal Model FT4X, is the newest Thermal Gas Mass Flow Meter offered from Fox Thermal.

Its BLM accuracy compliant Data Logger has a 7-year history! 

Features:

• Insertion, Inline & Remote Styles
• DDC-Sensor™ Technology
• Gas-SelectX® & CAL-V™
• Advanced Data Logger for BLM
• Scroll down for more features/benefits!

Applications:

• Gas Refineries
• Petrochemical Production
• BLM Gas Leases
• Flares & Combustors

The post Thiết bị đo lưu lượng FT4X Fox Thermal appeared first on thietbicongnghiepnang.com.