Tăng Minh Phát http://thietbicongnghiepnang.com/ Tăng Minh Phát - Đại lý phân phối thiết bị cơ điện, thiết bị nhà máy như : Redlion Vietnam, Tdk lambda vietnam, wise vietnam, burkert vietnam 2026-04-15 11:27:45 +0000 vi hourly 1 Website Máy đo lực ESM750S Mark-10 http://thietbicongnghiepnang.com/may-do-luc-esm750s-mark10 2019-10-09 09:06:30 http://thietbicongnghiepnang.com/may-do-luc-esm750s-mark10

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Readmore

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750S Mark 10

  • Force measurement to 750 lbF (3.4 kN)
  • 14.2" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM750S Mark-10 appeared first on thietbicongnghiepnang.com.

]]> Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750S Mark 10

  • Force measurement to 750 lbF (3.4 kN)
  • 14.2" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

]]> Máy đo lực ESM303 Mark-10 http://thietbicongnghiepnang.com/may-do-luc-esm303-mark10 2019-10-09 09:05:57 http://thietbicongnghiepnang.com/may-do-luc-esm303-mark10

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Máy đo lực ESM303 Mark-10

Readmore

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM303 Mark 10

  • Force measurement to 300 lbF (1.5 kN)
  • Vertical orientation
  • 18" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

1. ĐẶC ĐIỂM MÁY ĐO LỰC ESM303

  • Selectable speed setting

  • Upper and lower travel limit switches

  • Adjustable, removal controller with intuitive menu navigation

  • Password protection of test parameters

  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

  • USB output of force vs. time or force vs. travel

  • Compact footprint, suitable for crowded workbenches

  • Ergonomic design, with smart, clean cable management

  • Integrated electronics assembly, easily removed and transported

  • Adjustable mounting plate with T-slot base

2. Thông số kĩ thuật ESM303

Load capacity:

< 24 in [610 mm]/min:

> 24 in [610 mm]/min:

300 lbF [1.5 kN]

200 lbF [1 kN]

Speed range:

Standard:

Optional:

0.5 - 13 in/min [13 - 330 mm/min]

0.02 - 45 in/min [0.5 - 1,100 mm/min]

Maximum travel:

18.0 in [457 mm]

Speed setting accuracy:

±0.2%

Speed variation with load:

±0% [Stepper motor driven]

Travel accuracy:

±0.002 in per 10 in [±0.05 mm per 250 mm]

Travel resolution:

0.001 in [0.02 mm]

Travel display position retention:

Most recent position is recalled upon powering on

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 80-240 VAC, 50/60 Hz, 60W

Weight:

56.5 lb [25.6 kg]

3. CÁC CHỨC NĂNG CỦA ESM303

Function

Part No.

Description

Requirements

FollowMeTM

AF008

Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Travel indication

AF009

Travel is indicated on the control unit display, with output via USB. The most recent position is displayed upon powering on. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs.

Backlash and nonlinearity are virtually eliminated.
  • Field hardware installation required.
  • If data output to a PC is required, add 09-1214 and 09-1158 cables, and a Series 7 or 5 gauge or indicator with load cell.

Computer control

AF010

The ESM303 may be fully controlled by a PC through a custom- written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).

This option is not required for MESUR™gauge Plus software.
  • Series 7 or 5 gauge or indicator with load cell
  • AF009 travel indication
  • 09-1214 interface cable
  • 09-1158 USB output cable
  • For full speed range, consider AF017 and AF018 speed range extensions

Programmable travel limits

AF011

The stand stops at or cycles between programmable upper and lower travel distances.

- AF009 travel indication option

Overload protection

AF012

Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Auto return

AF013

The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.
  • If reversing at force set point: Series 7 or 5 gauge or indicator with load cell, and 09-1214 interface cable
  • If reversing at travel limit: AF011 programmable travel limits option
  • If reversing at break: AF019 break detection op- tion and 09-1214 interface cable

Cycling / dwell time

AF014

Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.

- Same as auto return, at the same speed in each direction. Add AF016 for independent up and down speeds.

Independent up and down speeds

AF016

Individually configure speeds for the up and down directions.

Low speed range extension

AF017

Extends the standard speed range down to

0.02 in/min (0.5 mm/min).

High speed range extension

AF018

Extends the standard speed range up to 45 in/min (1,100 mm/min).

Break detection

AF019

Crosshead stops at a sudden drop in force. Programmable percentage of peak force.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Load holding

AF020

Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.
  • Series 7 or 5 gauge or indicator with load cell
  • If a specified time is required, add AF014 cycling

/ dwell time option

  • 09-1214 interface cable

Preload / sample touch

AF021

Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.
  • AF009 travel indication
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Profiles

AF022

Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.

Complete options package

AFCOMP

Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable.

Requires a Series 7 or 5 gauge or indicator with load cell.

4. ORDERING INFORMATION

Hardware

ESM303

Motorized test stand,110V*

09-1214

Interface cable, gauge / indicator to ESM303

09-1158

USB output cable

AC1062

Load cell / indicator mounting kit

ESM303-001-1 / -2 / -3

Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-002-1 / -2 / -3

Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-003

Safety shield

Controller Options

AF008

FollowMeTM force-based manual positioning

AF009

Travel indication, with USB output

AF010

Computer control, via USB

AF011

Programmable travel limits

AF012

Integrated overload protection

AF013

Auto return

AF014

Cycling / dwell time

AF016

Independent up and down speeds

AF017

Extended speed range, low

AF018

Extended speed range, high

AF019

Break detection

AF020

Load holding

AF021

Preload / sample touch

AF022

Profiles

AFCOMP

Complete options package

(includes all Controller Options, plus 09-1124 and 09-1158 cables)

5. CẤU TẠO ESM303

Máy đo lực ESM303 Mark-10

6. BẢN VẼ KĨ THUẬT

Máy đo lực ESM303 Mark-10

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM303 Mark-10 appeared first on thietbicongnghiepnang.com.

]]> Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM303 Mark 10

  • Force measurement to 300 lbF (1.5 kN)
  • Vertical orientation
  • 18" of travel
  • PC control available
  • Stop / cycle at force, travel, or limit switch
  • Overload protection

1. ĐẶC ĐIỂM MÁY ĐO LỰC ESM303

  • Selectable speed setting

  • Upper and lower travel limit switches

  • Adjustable, removal controller with intuitive menu navigation

  • Password protection of test parameters

  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load

  • USB output of force vs. time or force vs. travel

  • Compact footprint, suitable for crowded workbenches

  • Ergonomic design, with smart, clean cable management

  • Integrated electronics assembly, easily removed and transported

  • Adjustable mounting plate with T-slot base

2. Thông số kĩ thuật ESM303

Load capacity:

< 24 in [610 mm]/min:

> 24 in [610 mm]/min:

300 lbF [1.5 kN]

200 lbF [1 kN]

Speed range:

Standard:

Optional:

0.5 - 13 in/min [13 - 330 mm/min]

0.02 - 45 in/min [0.5 - 1,100 mm/min]

Maximum travel:

18.0 in [457 mm]

Speed setting accuracy:

±0.2%

Speed variation with load:

±0% [Stepper motor driven]

Travel accuracy:

±0.002 in per 10 in [±0.05 mm per 250 mm]

Travel resolution:

0.001 in [0.02 mm]

Travel display position retention:

Most recent position is recalled upon powering on

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 80-240 VAC, 50/60 Hz, 60W

Weight:

56.5 lb [25.6 kg]

3. CÁC CHỨC NĂNG CỦA ESM303

Function

Part No.

Description

Requirements

FollowMeTM

AF008

Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Travel indication

AF009

Travel is indicated on the control unit display, with output via USB. The most recent position is displayed upon powering on. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs.

Backlash and nonlinearity are virtually eliminated.
  • Field hardware installation required.
  • If data output to a PC is required, add 09-1214 and 09-1158 cables, and a Series 7 or 5 gauge or indicator with load cell.

Computer control

AF010

The ESM303 may be fully controlled by a PC through a custom- written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).

This option is not required for MESUR™gauge Plus software.
  • Series 7 or 5 gauge or indicator with load cell
  • AF009 travel indication
  • 09-1214 interface cable
  • 09-1158 USB output cable
  • For full speed range, consider AF017 and AF018 speed range extensions

Programmable travel limits

AF011

The stand stops at or cycles between programmable upper and lower travel distances.

- AF009 travel indication option

Overload protection

AF012

Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Auto return

AF013

The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.
  • If reversing at force set point: Series 7 or 5 gauge or indicator with load cell, and 09-1214 interface cable
  • If reversing at travel limit: AF011 programmable travel limits option
  • If reversing at break: AF019 break detection op- tion and 09-1214 interface cable

Cycling / dwell time

AF014

Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.

- Same as auto return, at the same speed in each direction. Add AF016 for independent up and down speeds.

Independent up and down speeds

AF016

Individually configure speeds for the up and down directions.

Low speed range extension

AF017

Extends the standard speed range down to

0.02 in/min (0.5 mm/min).

High speed range extension

AF018

Extends the standard speed range up to 45 in/min (1,100 mm/min).

Break detection

AF019

Crosshead stops at a sudden drop in force. Programmable percentage of peak force.
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Load holding

AF020

Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.
  • Series 7 or 5 gauge or indicator with load cell
  • If a specified time is required, add AF014 cycling

/ dwell time option

  • 09-1214 interface cable

Preload / sample touch

AF021

Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.
  • AF009 travel indication
  • Series 7 or 5 gauge or indicator with load cell
  • 09-1214 interface cable

Profiles

AF022

Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.

Complete options package

AFCOMP

Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable.

Requires a Series 7 or 5 gauge or indicator with load cell.

4. ORDERING INFORMATION

Hardware

ESM303

Motorized test stand,110V*

09-1214

Interface cable, gauge / indicator to ESM303

09-1158

USB output cable

AC1062

Load cell / indicator mounting kit

ESM303-001-1 / -2 / -3

Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-002-1 / -2 / -3

Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]

ESM303-003

Safety shield

Controller Options

AF008

FollowMeTM force-based manual positioning

AF009

Travel indication, with USB output

AF010

Computer control, via USB

AF011

Programmable travel limits

AF012

Integrated overload protection

AF013

Auto return

AF014

Cycling / dwell time

AF016

Independent up and down speeds

AF017

Extended speed range, low

AF018

Extended speed range, high

AF019

Break detection

AF020

Load holding

AF021

Preload / sample touch

AF022

Profiles

AFCOMP

Complete options package

(includes all Controller Options, plus 09-1124 and 09-1158 cables)

5. CẤU TẠO ESM303

Máy đo lực ESM303 Mark-10

6. BẢN VẼ KĨ THUẬT

Máy đo lực ESM303 Mark-10

Xem thêm chi tiêt : TẠI ĐÂY

]]> Máy đo độ cứng cao su tự động Teclock http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-tu-dong-teclock 2019-08-07 16:07:55 http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-tu-dong-teclock

Đại lý phân phối TECLOCK chính hãng-uy tín-chất lượng tại Việt Nam

Readmore

Đại lý phân phối Teclock chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

1. GX-02 Teclock | Automatic hardness tester

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

2. GS-610 Teclock | Automatic type Motor Driving Durometer Stand

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

3. GS-612 Teclock | Manual Operation type Durometer Stand with Speed Controller

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07（8  Accessory）

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07（9  Option）

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12（8  Option）

Trọng lượng GS 612 Teclock : 8.5 kg

4. GS-615 Teclock | Manual Operation type Durometer Stand

Trọng lượng GS 615 Teclock : 3.9 kg

5. GS-607 Teclock | Durometer Tetster

6. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±１

TECLOCK Standards

Type OO       ±２

ASTM D 2240

Measuring range

30～100 IRHD

０～100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100～200Ｖ/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

8. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

213

GS-721N

Type （E  AO）

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

313

GSD-721K

Type （E  AO）

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

（55-822gf）

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

（20.7-113.3gf）

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

−

388-1288mN

（9-131gf）

φ0.35

1

100

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

（56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

（55-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

（0-4533gf）

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

313

The post Máy đo độ cứng cao su tự động Teclock appeared first on thietbicongnghiepnang.com.

]]> Đại lý phân phối Teclock chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

1. GX-02 Teclock | Automatic hardness tester

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

2. GS-610 Teclock | Automatic type Motor Driving Durometer Stand

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

3. GS-612 Teclock | Manual Operation type Durometer Stand with Speed Controller

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07（8  Accessory）

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07（9  Option）

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12（8  Option）

Trọng lượng GS 612 Teclock : 8.5 kg

4. GS-615 Teclock | Manual Operation type Durometer Stand

Trọng lượng GS 615 Teclock : 3.9 kg

5. GS-607 Teclock | Durometer Tetster

6. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±１

TECLOCK Standards

Type OO       ±２

ASTM D 2240

Measuring range

30～100 IRHD

０～100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100～200Ｖ/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

8. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

213

GS-721N

Type （E  AO）

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

313

GSD-721K

Type （E  AO）

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

（55-822gf）

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

（20.7-113.3gf）

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

−

388-1288mN

（9-131gf）

φ0.35

1

100

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

（56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

（55-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

（0-4533gf）

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

313
]]> Máy đo lực vặn nắp chai - TMP VIETNAM http://thietbicongnghiepnang.com/may-do-luc-van-nap-chai-tmp-vietnam 2019-07-05 15:29:22 http://thietbicongnghiepnang.com/may-do-luc-van-nap-chai-tmp-vietnam

Thiết bị phòng LAB, thiết bị đo lực vặn nắp chai hãng Mark 10, AT2E

Readmore

Công Ty Tăng Minh Phát - Chuyên cung cấp thiết bị và giải pháp cho phòng thí nghiệm

1. Máy đo lực vặn nắp chai Mark 10

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Digital Cap Torque Testers 

Model No.

lbFin

ozFin

kgFcm

Ncm

Nm

MTT01-12

12 x 0.005

192 x 0.1

14 x 0.01

135 x 0.1

1.35 x 0.001

MTT01-25

25 x 0.01

400 x 0.2

28 x 0.02

290 x 0.2

2.9 x 0.002

MTT01-50

5 0 x 0.02

800 x 0.5

58 x 0.05

570 x 0.5

5.7 x 0.005

MTT01-100

100 x 0.05

1600 x 1

116 x 0.1

1150 x 0.5

11.5 x 0.005

Features

  • High-speed 7,000 Hz sampling rate accurately captures peak torque values
  • First / second peak detection for slip and breakaway torques in tamper evident closures
  • Moveable posts and other available gripping options accommodate a wide range of sample shapes and sizes
  • USB, RS-232, Mitutoyo, and analog outputs
  • Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
  • 1,000-point data memory with statistics and outputs
  • Programmable set point indicators and outputs for pass/ fail determination
  • Password protection prevents unauthorized changes
  • MESURTM Lite data collection software included

Model : MTT01-12, MTT01-25, MTT01-50, MTT01-100

Xem chi tiết về máy đo lực vặn nắp chai của hãng Mark-10 : TẠI ĐÂY

2. Máy đo lực vặn nắp chai AT2E

a. Máy đo lực vặn nắp chai TMV5 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • Touch screen display
  • Measures opening and closing directions
  • 0.080 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.5 % of full scale
  • 100 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 20 operators memory
  • Setting of files by administrator code
  • Store and transfer up to 999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • 1 RS232 output for software & 1 printer output
  • Language: French / Italian / Spanish / English
  • Delivered with COFRAC calibration certificate
  • 110 / 230 V – 50/60 Hz

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Cosmetic
  • Optional battery
  • Dimensions: 300 (L) x 180 (W) x 200 (H) mm
  • Weight: 7 kg

b. Máy đo lực vặn nắp chai TMV7 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • 7″ Touch screen color display
  • Measures opening and closing directions
  • 0.030 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Special mode RELEASING & BREAKING Torque
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.2 % of full scale
  • 30 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 10 operators memory
  • 8 Access levels with code (op, Super op, admin)
  • Storage and transfer up to 9999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • Last measure curve
  • 2 outputs: RS232 & mini USB (software & printer)
  • Language: French / Italian / Spanish / English
  • Delivered with ASTM calibration certificate
  • 110 / 230 V – 50/60 Hz
  • Transportation case

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Fast squeeze system
  • Dimensions: 370 x 215 x150 to 200 mm
  • Weight: 7 kg

Ngoài ra, Tăng Minh Phát còn cung cấp máy đo lực vặn nắp chai tự động

Hãy liên hệ với chúng tối để biết thêm thông tin chi tiết

The post Máy đo lực vặn nắp chai - TMP VIETNAM appeared first on thietbicongnghiepnang.com.

]]> Công Ty Tăng Minh Phát - Chuyên cung cấp thiết bị và giải pháp cho phòng thí nghiệm

1. Máy đo lực vặn nắp chai Mark 10

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Digital Cap Torque Testers 

Model No.

lbFin

ozFin

kgFcm

Ncm

Nm

MTT01-12

12 x 0.005

192 x 0.1

14 x 0.01

135 x 0.1

1.35 x 0.001

MTT01-25

25 x 0.01

400 x 0.2

28 x 0.02

290 x 0.2

2.9 x 0.002

MTT01-50

5 0 x 0.02

800 x 0.5

58 x 0.05

570 x 0.5

5.7 x 0.005

MTT01-100

100 x 0.05

1600 x 1

116 x 0.1

1150 x 0.5

11.5 x 0.005

Features

  • High-speed 7,000 Hz sampling rate accurately captures peak torque values
  • First / second peak detection for slip and breakaway torques in tamper evident closures
  • Moveable posts and other available gripping options accommodate a wide range of sample shapes and sizes
  • USB, RS-232, Mitutoyo, and analog outputs
  • Automatic output, data storage, and zeroing upon bottle cap removal helps automate testing processes
  • 1,000-point data memory with statistics and outputs
  • Programmable set point indicators and outputs for pass/ fail determination
  • Password protection prevents unauthorized changes
  • MESURTM Lite data collection software included

Model : MTT01-12, MTT01-25, MTT01-50, MTT01-100

Xem chi tiết về máy đo lực vặn nắp chai của hãng Mark-10 : TẠI ĐÂY

2. Máy đo lực vặn nắp chai AT2E

a. Máy đo lực vặn nắp chai TMV5 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • Touch screen display
  • Measures opening and closing directions
  • 0.080 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.5 % of full scale
  • 100 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 20 operators memory
  • Setting of files by administrator code
  • Store and transfer up to 999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • 1 RS232 output for software & 1 printer output
  • Language: French / Italian / Spanish / English
  • Delivered with COFRAC calibration certificate
  • 110 / 230 V – 50/60 Hz

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Cosmetic
  • Optional battery
  • Dimensions: 300 (L) x 180 (W) x 200 (H) mm
  • Weight: 7 kg

b. Máy đo lực vặn nắp chai TMV7 AT2E

MÁY ĐO LỰC VẶN NẮP CHAI - TĂNG MINH PHÁT

Technical specifications:

  • 7″ Touch screen color display
  • Measures opening and closing directions
  • 0.030 to 4.000 Kgf.cm in high accuracy mode
  • Measuring range: 00.00 to 99.00 Kgf.cm
  • 3 measuring modes (mean, peak, peak+infos)
  • Special mode RELEASING & BREAKING Torque
  • Units: Kgf.cm / Inch.lbs / daN.cm / N.m / N.cm
  • Accuracy: ± 0.2 % of full scale
  • 30 product memory with 4 limits each
  • 4 thresholds by product (V Low, Low, High, v High)
  • 10 operators memory
  • 8 Access levels with code (op, Super op, admin)
  • Storage and transfer up to 9999 measurements
  • Message + bar graph of torque value
  • Dynamic display: statistics, hour, date
  • Display: product name, operator, batch N°, line N°
  • Last measure curve
  • 2 outputs: RS232 & mini USB (software & printer)
  • Language: French / Italian / Spanish / English
  • Delivered with ASTM calibration certificate
  • 110 / 230 V – 50/60 Hz
  • Transportation case

Mechanical specifications:

  • Stainless steel frame
  • Choice of measuring table: Agro / Fast squeeze system
  • Dimensions: 370 x 215 x150 to 200 mm
  • Weight: 7 kg

Ngoài ra, Tăng Minh Phát còn cung cấp máy đo lực vặn nắp chai tự động

Hãy liên hệ với chúng tối để biết thêm thông tin chi tiết

]]> Máy đo độ cứng cao su Teclock | Teclock Vietnam http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-teclock 2019-04-25 23:16:29 http://thietbicongnghiepnang.com/may-do-do-cung-cao-su-teclock

Tăng Minh Phát - Đại lý cung cấp thiết bị đo độ cứng của hãng Teclock tại Việt Nam, chuyên cung cấp đồng hồ đo độ cứng, máy đo độ cứng cao su, nhựa...

Máy đo độ cứng cao su Teclock | Teclock Vietnam

Readmore

Đại lý phân phối Teclock/ Nhật Bản chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Mục lục nội dung

1. Độ cứng IRHD là gì ?

2. Thang đo độ cứng cao su

3. Một số máy đo độ cứng cao su tự động

     a. GX-02 Teclock

     b. GS-610 Teclock

     c. GS-612 Teclock

     d. GS-615 Teclock

     e. GS-607 Teclock

     f. GS-608sel Teclock

     g. GX-700 Teclock

Máy đo độ cứng cao su Teclock | Teclock Vietnam

1. Độ cứng IRHD là gì ?

Độ cứng IRHD là tiêu chuẩn độ cứng cao su quốc tế

 Độ cứng của cao su, đo bằng dụng cụ bỏ túi IRHD hoặc thiết bị đo độ cứng Shore.

– Được xác định từ phản hồi tổng thể của cao su đối với tác động ấn lõm.

– Dụng cụ bỏ túi IRHD là dụng cụ đo xách tay có thể di chuyển. Đã được hiệu chuẩn để đo trên thang đo IRHD.

2. Thang đo độ cứng cao su

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

3. Một số máy đo độ cứng thông dụng

Máy đo độ cứng cao su Teclock | Teclock Vietnam

a. Máy đo độ cứng GX-02

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

b. Máy đo độ cứng GS-610

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

Tốc độ giảm dần : 1,0 đến 20,0 mm / giây (mỗi 0,1 mm / giây có thể được đặt)

Nhấn cân : Khối lượng đơn vị 346g (bao gồm cả lò xo)
Trọng lượng tiêu chuẩn (ZY-089):  487,5g

Mức tiêu thụ hiện tại 1.0 (A) hoặc ít hơn

Kích thước bên ngoài : W180 (không bao gồm phần nhô ra SW) x L276 (không bao gồm phần nhô ra của đầu nối)

x H400 (tối đa đầu bóng) (mm)

Khối lượng: Bộ phận chính 11,4 (kg) / nguồn điện 0,2 (kg)

Nguồn cấp: Đầu vào AC100-240 (V) / Đầu ra bộ chuyển đổi (Đầu vào đơn vị chính) DC24 (V)

Điều chỉnh độ sáng màn hình: Có thể đặt 1 đến 8 bước

Điều chỉnh độ nhạy cảm ứng: Có thể cài đặt Hi / Lo 2 bước

Cài đặt âm thanh cảm ứng: Có sẵn / không có sẵn

c. Máy đo độ cứng GS-612

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07（8  Accessory）

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07（9  Option）

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12（8  Option）

Trọng lượng GS 612 Teclock : 8.5 kg

d. Máy đo độ cứng GS-615

Trọng lượng GS 615 Teclock : 3.9 kg

e. Máy đo độ cứng GS-607

f. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±１

TECLOCK Standards

Type OO       ±２

ASTM D 2240

Measuring range

30～100 IRHD

０～100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100～200Ｖ/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

g. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

1. GS-719, GS-720, GS-721 Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

213

GS-721N

Type （E  AO）

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

313

GSD-721K

Type （E  AO）

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

（55-822gf）

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

（20.7-113.3gf）

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

−

388-1288mN

（9-131gf）

φ0.35

1

100

2. GS-702, GS-709, GS-750, GS-751

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

（56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

（55-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

（0-4533gf）

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

313

XEM THÊM CHI TIẾT : TẠI ĐÂY 

The post Máy đo độ cứng cao su Teclock | Teclock Vietnam appeared first on thietbicongnghiepnang.com.

]]> Đại lý phân phối Teclock/ Nhật Bản chính hãng-uy tín-chất lượng tại Việt Nam

Thiết bị đo độ cứng Teclock | Máy đo độ cứng Teclock | Teclock Vietnam

Mục lục nội dung

1. Độ cứng IRHD là gì ?

2. Thang đo độ cứng cao su

3. Một số máy đo độ cứng cao su tự động

     a. GX-02 Teclock

     b. GS-610 Teclock

     c. GS-612 Teclock

     d. GS-615 Teclock

     e. GS-607 Teclock

     f. GS-608sel Teclock

     g. GX-700 Teclock

Máy đo độ cứng cao su Teclock | Teclock Vietnam

1. Độ cứng IRHD là gì ?

Độ cứng IRHD là tiêu chuẩn độ cứng cao su quốc tế

 Độ cứng của cao su, đo bằng dụng cụ bỏ túi IRHD hoặc thiết bị đo độ cứng Shore.

– Được xác định từ phản hồi tổng thể của cao su đối với tác động ấn lõm.

– Dụng cụ bỏ túi IRHD là dụng cụ đo xách tay có thể di chuyển. Đã được hiệu chuẩn để đo trên thang đo IRHD.

2. Thang đo độ cứng cao su

Máy đo độ cứng cao su tự động Teclock có thể sử dụng với nhiều loại đồng hồ đo độ cứng teclock ( đồng hồ đo độ cứng loại A, đồng hồ đo độ cứng loại D, đồng hồ đo độ cứng loại E...) tùy theo nhu cầu và mục đích sử dụng của khách hàng.

Đồng hồ đo độ cứng cao su Teclock

3. Một số máy đo độ cứng thông dụng

Máy đo độ cứng cao su Teclock | Teclock Vietnam

a. Máy đo độ cứng GX-02

Automatic hardness tester [GX-02 series] can perform the measurement with the operating speed, the measuring weight and the pressing-surface dimensions which are specified in JIS K 6253 “Determination of hardness - Vulcanized rubber and Thermoplastic rubber”.

b. Máy đo độ cứng GS-610

 - Độ cứng có thể được đo bằng máy Durometer ( GS 615 Teclock ) với tải và tốc độ quy định theo tiêu chuẩn chỉ bằng công tắc vận hành.
- Có thể điều chỉnh bằng tay
- 1kg có thể được đo bằng máy đo độ cứng loại A và loại E . Máy đo độ cứng loại D cần chọn thêm option ZY-128 để đo 5kg.         

Trọng lượng GS 610 Teclock : 9 kg

Nguồn : 100 - 240VAC ( AC adapter accessory)

Tốc độ giảm dần : 1,0 đến 20,0 mm / giây (mỗi 0,1 mm / giây có thể được đặt)

Nhấn cân : Khối lượng đơn vị 346g (bao gồm cả lò xo)
Trọng lượng tiêu chuẩn (ZY-089):  487,5g

Mức tiêu thụ hiện tại 1.0 (A) hoặc ít hơn

Kích thước bên ngoài : W180 (không bao gồm phần nhô ra SW) x L276 (không bao gồm phần nhô ra của đầu nối)

x H400 (tối đa đầu bóng) (mm)

Khối lượng: Bộ phận chính 11,4 (kg) / nguồn điện 0,2 (kg)

Nguồn cấp: Đầu vào AC100-240 (V) / Đầu ra bộ chuyển đổi (Đầu vào đơn vị chính) DC24 (V)

Điều chỉnh độ sáng màn hình: Có thể đặt 1 đến 8 bước

Điều chỉnh độ nhạy cảm ứng: Có thể cài đặt Hi / Lo 2 bước

Cài đặt âm thanh cảm ứng: Có sẵn / không có sẵn

c. Máy đo độ cứng GS-612

Máy đo độ cứng cao su tự động GS 612 Teclock

Pressure Value

Weigt Code-No.

Applicable Durometer Model

1㎏

Analog

ZY-07（8  Accessory）

A , B , E , A(Old) ,

TypeC(ASKER C) , O

Digital

ZY-07（9  Option）

D , ASTM C , DO , JIS C(old type)

4㎏

ZY-12（8  Option）

Trọng lượng GS 612 Teclock : 8.5 kg

d. Máy đo độ cứng GS-615

Trọng lượng GS 615 Teclock : 3.9 kg

e. Máy đo độ cứng GS-607

f. GS-608SEL Teclock | Totally Automatic type IRHD / M method Micro

Micro-hardness can be measured by 1/8 scale each durometer of type A, E, E2, OO, FO in addition to IRHD / M method.

 - Hardness of O ring and small rubber parts can be measured with totally automatic.

 - Voice coil motor is adopted for load system. Friction and reproducibility of inner mechanism is improved, which is different from weight system.

 - It is plug-in type that plunger (contact point) can be easily changed and recalibration on test method change is not needed.

 - As test piece table is wide, various measuring jigs can be set up

Máy đo độ cứng cao su tự động GS 608Sel Teclock

Hardness testing method

IRHD・M-method

Durometer Hardness

Compliance standards

ISO 48/JIS K 6253

ISO 7619/JIS K 6253

TECLOCK Standards/ASTM D 2240

Measuring accuracy

±0.1 IRHD

Type A/E        ±1

JIS K 6253

Type E2/FO ±１

TECLOCK Standards

Type OO       ±２

ASTM D 2240

Measuring range

30～100 IRHD

０～100

Minimum indication unit

0.1

Measurement part movable distance

100mm

Measurable test-piece dimensions

W=160 / D=110 / H=100mm

Conformity standards

EC Directive (EN61326)

Outside interface

RS-232C

Power

AC100～200Ｖ/AdapterDC24V

Weight

7.8kg (Main unit)/0.6kg (Power unit)

Accessories

PC application CD (for Windows XP & 7)

PC connecting cables/AC adapter

Spare plunger (x1) (ZS-121) for IRHD

Rubber specimen

ZY-917 6 types set (w/Inspection table)

Trọng lượng GS 608sel Teclock : 7.8 kg

g. SmartTester GX-700

New product! fully automatic type IRHD, M-method micro-sized international rubber hardness tester

Fully automatic IRHD a successful first domestic production. O-ring and the hardness of the rubber sheet can be measured.
By using the option of the plunger (the probe), you can measure with the durometer hardness test method A, E, E2, FO, 00 (approximate).
O-ring and hardness of small rubber parts and can be measured fully automatically.
It uses a voice coil motor to load system. Unlike the weight formula, it increased the friction and reproducibility of the internal mechanism.
A simple plug-in type, easy to exchange plunger (the probe). Becasue it's a domestic product, maintenance of correspondence is quick.
The sample stage is wide so that it allows the installation of various measurement jig.
It ca issue of calibration documents.

Một số loại Đồng hồ shore đi kèm với máy đo độ cứng cao su tự động Teclock

1. GS-719, GS-720, GS-721 Teclock

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-719N

Type A

General rubber

(Medium hardness)

JIS K 6253

ISO 7619

ISO 868

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-719G

Type A(Peak Pointer Type)

General rubber (Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

208

GS-719R

Type Aφ18mm / stand combined

General rubber

(Medium hardness)

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

213

GS-720N

Type D

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

200

GS-720G

Type D(Peak Pointer Type)

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

208

GS-720R

Type Aφ18mm / stand combined

Hard rubber (High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

213

GS-721N

Type （E  AO）

(High hardness)

Soft rubber

JIS K 6253

ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

200

GS-721G

Type A(Peak Pointer Type)

(High hardness) Soft rubber

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

208

GS-719P

Type A(Pocket Type)

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

General rubber, soft plastic

JIS K 6253, JIS K 7215,

ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

2.50

313

GSD-720K

Type D

Hard rubber, Plastic

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

313

GSD-721K

Type （E  AO）

Very soft rubber

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Hemisphere of SR2.50

2.50

313

GSD-719K-R

Type Aφ18mm / Stand combined

General rubber

(Medium hardness)

JIS K 6253, ISO 7619

ISO 868, ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

320

GSD-720K-R

Type Aφ18mm / Stand combined

Hard rubber

(High hardness)

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

2.50

320

Model

Type

Application / Materials

Conform Standards

Spring Load Value

0-100

Indentor Shape

(mm)

Presser Foot

Diameter (mm)

Indentor Height(mm)

Weight

(g)

Analog

GS-719H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

120

GS-719L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

360

GS-720H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, ISO 7619

ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

120

GS-720L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, ISO 7619

ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

360

Digital

GSD-719K-H

Type A

General rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79 with 35° angle

φ12

2.50

170

GSD-719K-L

Type A

General rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240, DIN 53 505

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

φ18

2.50

380

GSD-720K-H

Type D

Hard rubber / Deep hole type (narrow hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ12

2.50

170

GSD-720K-L

Type D

Hard rubber / Long leg

type (thick hole)

JIS K 6253, JIS K 7215, ISO 7619, ISO

868, ASTM D 2240, DIN 53 505

0-44450mN

（0-4533gf）

Conical Cone of Ｒ0.1

with 30° angle

φ18

2.50

380

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

GS-719P

Type A

General rubber

(Medium hardness)

JIS K 6253

550-8050mN

（56.1-821.1gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

100

GS-709P

Type A

Soft plastic,

General rubber

JIS K 7215

549-8061mN

（55-822gf）

100

GS-755

Type OOO

Ultora soft rubber

ASTM D 2240

203-1111mN

（20.7-113.3gf）

Hemisphere of SR6.35

125

GS-779G

Type A

approximate

Thin Sheet Hardness

−

388-1288mN

（9-131gf）

φ0.35

1

100

2. GS-702, GS-709, GS-750, GS-751

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-702N

Type D

Plastics / Hard rubber

JIS K 7215

ISO 868

ASTM D 2240

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

200

GS-702G

Type D (Peak pointer type)

Plastics / Hard rubber

0-44483mN

（0-4536gf）

Conical Cone of R0.1

with 35° angle

2.50

208

GS-709N

Type A

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

200

GS-709G

Type A (Peak pointer type)

Soft plastic / General rubber

549-8061mN

（56-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

208

GS-709P

Type A (Pocket type)

Soft plastic / General rubber

JIS K 7215

550-8050mN

（56.1-821.1gf

Truncated Cone of φ 0.79

with 35° angle

2.50

125

Digital

GSD-719K

Type A

Soft plastic / General rubber

JIS K 6253, JIS K 7215, ISO 7619, ISO 868,

ASTM D 2240

549-8061mN

（55-822gf）

Truncated Cone of φ 0.79

with 35° angle

2.50

313

GSD-720K

Type D

Plastics / Hard rubber

0-44450mN

（0-4533gf）

Conical Cone of R0.1

with 35° angle

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height (mm)

Weight (g)

Analog

GS-750G

Type B

(Peak Pointer type)

Medium-hard rubber

ASTM D 2240

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1

with 30° angle

2.50

208

GS-751G

Type C

(Peak Pointer type)

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

208

GS-752G

Type DO

(Peak Pointer type)

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

208

GS-753G

Type O

(Peak Pointer type)

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

208

GS-754G

Type OO

(Peak Pointer type)

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

208

GS-755

Type OOO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 6.35

2.50

125

Digital

GSD-750K

Type B

Medium-hard rubber

550-8050mN

(56.1-821.1gf)

Conical corn of R 0.1 with 30° angle

2.50

313

GSD-751K

Type C

Hard rubber

0-44450mN

(0-4533gf)

Truncated cone ofφ 0.79

with 35° angle

2.50

313

GSD-752K

Type DO

Medium-hard rubber

0-44450mN

(0-4533gf)

Hemisphere of SR 1.19

2.50

313

GSD-753K

Type O

Soft rubber

550-8050mN

(56.1-821.1gf)

Hemisphere of SR 1.19

2.50

313

GSD-754K

Type OO

Very soft rubber

203-1111mN

(20.7-113.3gf)

Hemisphere of SR 1.19

2.50

313

Model

Type

Application / Materials

Conform Standards

Spring Load Value 0-100

Indentor Shape (mm)

Indentor Height(mm)

Weight (g)

Analog

GS-703N

JIS C(old type)

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-703G

Type C(old type) Peak Pointer type

Hard rubber

JIS K 6301

980-44100mN

（100-4500gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

GS-706N

JIS A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

200

GS-706G

Type A(old type)

Peak Pointer type

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79 with 35° angle

2.54

208

Digital

GSD-706K

Type A(old type)

General rubber

JIS K 6301

539-8385mN

（55-855gf）

Truncated Cone of φ 0.79

with 35° angle

2.54

313

XEM THÊM CHI TIẾT : TẠI ĐÂY 

]]>