Tăng Minh Phát

Đồng hồ đo áp suất tiếp điểm điện T5500E Ashcroft

thietbicongnghiepnang — 2020-04-01 08:01:31

Tăng Minh Phát _ Nhà phân phối đồng hồ đo áp suất chính hãng tại Việt Nam

The post Đồng hồ đo áp suất tiếp điểm điện T5500E Ashcroft appeared first on thietbicongnghiepnang.com.

P731,P721,P711 Wise | Đồng hồ áp suất Wise

thietbicongnghiepnang — 2019-07-05 10:17:47

Đại lý Wise Control tại Việt Nam

Diaphragm seal type pressure gauge_P710,P720,P730

P710 Series - Screwed process connection P720 Series - "I" type process connection P730 Series - Flat type flange process connection

Service intended

Diaphragm seal type gauges are suitable for the situation where the process medium would corrode the instrument connection and pressure sensing element. Furthermore, this type of gauge is highly recommended in a situation where the process medium contains suspended solids, or if it is sufficiently viscous to clog the instrument connection and pressure sensing element. Additionally, it is recommended to be used where the process medium might freeze or solidify the instrument connection and pressure sending element due to the ambient or process temperature change, and where the process medium requires the flushing from the system to prevent any contamination.

Design	Internal diaphragm
Accuracy	Refer to gauge model
Suitable pressure range (MPa, kPa, bar)	-0.1 ~ 0 to -0.1 ~ 2.5 MPa 0 ~ 0.1 to 0 ~ 35 MPa
Filling liquid	Silicone oil
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Diaphragm material	Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Process connection	Model P710 : PT, NPT and others feasible Model P720, P730 : Flanges to ANSI, JIS or other standard
Upper flange (Gauge side)	Stainless steel (304SS, 316SS, Titanium)
Diaphragm	316L SS, Monel, Hastelloy-C Titanium, Tantalum, Nickel, Alloy20
Under flange (Process side)	Stainless steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C, Titanium, Nickel
Certificates	ATEX Ex II GD c IIC TX
Option	■ Diaphragm and under flange are available in PTFE coating or PTFE lining (★See note) ■ Under flange (Process side) are available in purging plug or heating/cooling jacket

The post P731,P721,P711 Wise | Đồng hồ áp suất Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T990 Wise

thietbicongnghiepnang — 2019-06-28 09:50:55

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T990 Wise

Đại lý phân phối Wise Control tại Việt Nam

Đồng hồ đo nhiệt độ T990 Wise

Explosion proof type indicating temperature switch_T990

T990 Wise control

Service intended

This temperature switch is installed with a micro contact, and it is suitable for measuring the temperature of corrosive fluid. Dead band is fixed.

Ambient temperature	-20 ~ 60 °C
Nominal diameter	125 mm
Repeatability	±1.0 % of adjustable range
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, surface, Case mounting
Case	Silver gray finished aluminium
Cover	Silver gray finished aluminium
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Switch form	Micro contact type One SPDT or Two SPDT One DPDT
Contact rating	■ AC 125 V/250 V, 15 A and DC 30 V, 2 A DC 125 V, 0.5 A for resistance load ■ AC 125 V/250 V, 15 A and DC 30 V, 1 A DC 125 V, 0.05 A for inductive load
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Optional	Special accuracy, ±1.0 % of full scale
Certificates	KCS Ex d IIB+H2 T6

The post Đồng hồ đo nhiệt độ T990 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T953 Wise

thietbicongnghiepnang — 2019-06-28 09:50:27

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T953 Wise

Explosion proof temperature switch_T953 (953 series)

T953 (953 series)

Service intended

This temperature switch is installed with a micro contact, and it is suitable for measuring the temperature of corrosive fluid. Dead band is fixed.

Repeatability	±1.0 % of adjustable range
Dimension	Refer to type of mounting
Measuring system	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 300 °C
Working range	Maximum scale value
Working temperature	Ambient : -40 ~ 65 °C

Standard features

Location of stem	Bottom connection, surface, case mounting
Case	Silver gray finished aluminium
Cover	Silver gray finished aluminium
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Switch form	Micro contact type One SPDT (Model : T953-1B3) Two SPDT (Model : T953-2B3)
Certificates	KCS Ex d IIC T6 ATEX II 2G Ex d IIC T6 Gb IECEx Ex d IIC T6 Gb

The post Đồng hồ đo nhiệt độ T953 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T941, T942 Wise

thietbicongnghiepnang — 2019-06-28 09:48:36

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T941, T942 Wise

Weatherproof temperature switch_T941, T942

T941, T942

Service intended

This temperature switch is installed with a micro contact, and it is suitable for measuring the temperature of corrosive fluid. Dead band is fixed.

Dimension	Refer to type of mounting
Repeatability	±1.0 % of adjustable range
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Dead band	One SPDT : 5 ~ 6 % of full scale Two SPDT : 12 % of full scale
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	Silver gray finished aluminium
Cover	Silver gray finished aluminium
Switch type	Micro switch snap action
Switch form	One SPDT or Two SPDT DPDT
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Contact rating	■ AC 125 V/250 V, 15 A and DC 30 V, 2 A DC 125 V, 0.5 A for resistance load ■ AC 125 V/250 V, 15 A and DC 30 V, 1 A DC 125 V, 0.05 A for inductive load
Conduit connection	½" or ¾" PF
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF

The post Đồng hồ đo nhiệt độ T941, T942 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T931 Wise

thietbicongnghiepnang — 2019-06-28 09:48:00

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T931 Wise

Indicating temperature switch_T931 (Case compensation system SAMA class ⅢB) T932 (Full compensation system SAMA class ⅢA)

T931 (Case compensation system SAMA class ⅢB) T932 (Full compensation system SAMA class ⅢA)

Service intended

This temperature switch is installed with a micro contact and it is suitable for measuring the temperature of corrosive fluid. Dead band is fixed.

Nominal diameter	150 mm
Repeatability	±1.0 % of adjustable range
Accuracy	±2.0 % of full scale
Measuring system	Organic gas : 0 ~ 200 °C (Only T932) Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	Silver gray finished aluminium
Cover	Silver gray finished aluminium
Window	Instrument glass
Switch type	Micro switch snap action
Switch form	One SPDT for single setpoint Two SPDT for dual setpoint
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Contacts	AC 125 V / 250 V, 7 A AC 125 V / 250 V, 7 A for resistance load AC 125 V / 250 V, 7 A for inductive load
Conduit connection	½", ¾" PF
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy : ±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T931 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T930 Wise

thietbicongnghiepnang — 2019-06-28 09:47:26

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T930 Wise

Temperature recorder (Case compensation system)_T930

T930

Service intended

This recorder provides a single pen and 200 mm circular chart recorder with the function of measurement and recording. It is suitable for hazardous environment such as gas or chemical process.

Nominal diameter	246 (W) x 271 mm (H)
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	ALDC
Cover	ALDC
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Acrylic resin
Chart drive	Spring wound type 24 hours or 168 hours (7 days) rotation
Chart paper	200 mm circular
Mounting	Surface
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF

The post Đồng hồ đo nhiệt độ T930 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T761 Wise

thietbicongnghiepnang — 2019-06-28 09:46:38

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T761 Wise

Remote reading thermometer with electrical contact_T761(H), T762(H/L), T763(L), T764(H/HH)

T761(H), T762(H/L), T763(L), T764(H/HH)

Service intended

Contact type temperature gauge is installed with electrical contact actuated by pointer. It provides the function which electrical circuit can be opened or closed by manual setpoint. It is applicable where signal is required (Audible or visual alarm) for control of resistance or any other application with auxiliary relay and contact.

Nominal diameter	100 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection,surface, case mounting Lower back connection, flush, case lower mounting Lower back connection, flush, case center mounting
Case	304SS
Cover	304SS
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Acrylic
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black finished brass
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T761 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T751 Wise

thietbicongnghiepnang — 2019-06-28 09:46:07

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T751 Wise

Bimetal thermometer with electrical contact_T751(H), T752(H/L), T753(L), T754(H/HH)

T751(H), T752(H/L), T753(L), T754(H/HH)

Service intended

Contact type temperature gauge is installed with electric contact actuated by pointer. It provides the function which electrical circuit can be opened or closed by manual setpoint. It is applicable where signal is required (Audible or visual alarm) for control of resistance or any other application with auxiliary relay and contact.

Nominal diameter	100 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct Center back connection, direct
Case	304SS
Cover	304SS
Window	Acrylic
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm 304SS, 316SS and 316L SS
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T751 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T721 Wise

thietbicongnghiepnang — 2019-06-28 09:30:52

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T721 Wise

Direct reading aluminium case thermometer with electrical contact_T721(H), T722(H/L), T723(L), T724(H/HH)

T721(H), T722(H/L), T723(L), T724(H/HH)

Service intended

Nominal diameter	100 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, surface, case mounting Lower back connection, direct
Case	Black finished aluminium
Cover	Black finished aluminium
Capillary	Capillary : 1.6/0.2 mm, 316SS
Window	Acrylic
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black finished aluminium
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T721 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T711 Wise

thietbicongnghiepnang — 2019-06-28 09:15:35

Đại lý Wise Control chính hãng tại Việt Nam

Remote reading aluminium case thermometer with electrical contact_T711(H), T712(H/L), T713(L), T714(H/HH)

T711(H), T712(H/L), T713(L), T714(H/HH)

Service intended

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting Lower back connection, flush, case lower mounting Lower back connection, flush, case centre mounting
Case	Black finished aluminium
Cover	Black finished aluminium
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Acrylic
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black finished brass
Stem	6.4, 8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

Xem thêm chi tiết về thiết bị của Wise Control : TẠI ĐÂY

The post Đồng hồ đo nhiệt độ T711 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T521 Wise

thietbicongnghiepnang — 2019-06-28 09:14:46

Đại lý Wise Control chính hãng tại Việt Nam

Euro gauge Electrical contact type temperature gauge_T521(H), T522(H/L), T523(L), T524(H/HH), T525(L/LL), T526(H/L)

T521(H), T522(H/L), T523(L), T524(H/HH), T525(L/LL), T526(H/L)

Service intended

Contact type temperature gauge is installed with electric contact actuated by pointer. It provides the function which electrical circuit can be opened or closed by manual set point. It is applicable where signal is required (Audible or visual alarm) for control of resistance or any other application with auxiliary relay and contact.

Nominal diameter	100 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	304SS
Cover	304SS Bayonet type
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Safety glass Polycarbonate
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

Xem thêm chi tiết về thiết bị của Wise Control : TẠI ĐÂY

The post Đồng hồ đo nhiệt độ T521 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T501 Wise

thietbicongnghiepnang — 2019-06-28 09:14:14

Nhà cung cấp đồng hồ đo nhiệt độ Wise Việt Nam

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T751 Wise

Euro gauge Inductive contact type temperature gauge_T501(H), T502(H/L), T503(L), T504(H/HH), T505(L/LL)

T501(H), T502(H/L), T503(L), T504(H/HH), T505(L/LL)

Service intended

Contact type temperature gauge is installed with electric contact actuated by pointer. It provides the function which electrical circuit can be opened or closed by manual set point. It is applicable where signal is required (Audible or visual alarm) for control of resistance or any other application with auxiliary relay and contact.

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	304SS
Cover	Stainless steel (304SS) Bayonet type
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Safety glass : Only available with diameter 100 mm Polycarbonate : 100 and 160 mm
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale
Certificates	NEPSI Ex ia IIC T6 Ga Tamb = -20 ~ 56 ºC

The post Đồng hồ đo nhiệt độ T501 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T400 Wise

thietbicongnghiepnang — 2019-06-28 09:13:16

Đại lý cung cấp thiết bị đo nhiệt độ Wise tại Việt Nam

Đồng hồ đo nhiệt độ T400 Wise

Glass thermometer_T400

T400 Wise

Service intended

Glass thermometer is suitable to be used for temperature measurement in various industrial plants such as oil refinery, sugar factory, chemical industry, rubber plant and etc.

Form	Rectangular
Accuracy	±2.0 % of full scale
Measuring system	Liquid filled : 0 ~ 600 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct, "I" type Lower back connection, direct, "L" type
Case	Aluminium alloy
Stem	8.0, 10.0 and 12.0 mm Brass, 316SS and 316L SS
Stem, process connection	⅜", ½" PT, NPT and PF, 22 mm
Stem connection type	Movable thread

The post Đồng hồ đo nhiệt độ T400 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T360 Wise

thietbicongnghiepnang — 2019-06-28 09:11:37

Đại lý phân phối đồng hồ đo nhiệt độ Wise

Service intended

This thermometer is used for measuring temperature of corrosive and non-corrosive fluid in all industries. It operates in aggressive and non-aggressive environment. Linear dials and temperature compensate line assure an accurate temperature indication at varying ambient conditions.

Nominal diameter	125 mm
Accuracy	±2.0% of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting lugs Lower back connection, surface, case mounting lugs
Case and cover	Black glass reinforced thermoplastic (PBTB) Solid front, blow-out back Turret style case with built in rear flange lugs
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Polycarbonate
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T360 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T359 Wise

thietbicongnghiepnang — 2019-06-28 09:10:56

Đồng hồ đo nhiệt độ T359 Wise Readmore

Safety pattern type direct reading thermometer solid-front turret style thermoplastic case_T359

Service intended

Nominal diameter	125 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct Lower back connection, direct
Case and cover	Black glass reinforced thermoplastic (PBTB) Solid front, blow-out back Turret style case with built in rear flange lugs
Window	Polycarbonate
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.4, 8.0, 10.0 and 12.0 mm 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale
Certificates	ATEX Ex II GD c IIB TX

The post Đồng hồ đo nhiệt độ T359 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T290 Wise

thietbicongnghiepnang — 2019-06-28 09:10:10

Đồng hồ đo nhiệt độ T290 Wise Readmore

Direct reading thermometer with adjustable stem_T290

Service intended

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Lower back with adjustable stem
Case	304SS, Adjustable on stem 90°
Cover	304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Stem connection type	Movable thread
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T290 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T259 Wise

thietbicongnghiepnang — 2019-06-28 09:09:25

Đồng hồ đo nhiệt độ T259 Wise Readmore

Đồng hồ đo nhiệt độ Wise

Euro gauge Liquid filled direct reading thermometer_T259

Service intended

Liquid filled thermometer is used for measuring temperature of corrosive and non-corrosive fluid in all industries. It operates in aggressive and non-aggressive environment. Linear dials and temperature compensate line assure an accurate temperature indication at varying ambient conditions.

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct Lower back connection, direct
Case	304SS
Cover	304SS Bayonet type
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Filling liquid	Glycerin or silicone
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T259 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T250 Wise

thietbicongnghiepnang — 2019-06-28 09:08:41

Đồng hồ đo nhiệt độ T250 Wise Readmore

Euro gauge Direct reading thermometer_T250

Service intended

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct Lower back connection, direct
Case	304SS
Cover	304SS Bayonet type
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem,process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T250 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T222 Wise

thietbicongnghiepnang — 2019-06-28 09:07:47

Đồng hồ đo nhiệt độ T222 Wise Readmore

Direct reading thermometer with aluminium case_T222

Service intended

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct Bottom connection, surface, case mounting Lower back connection, direct
Case	Black finished aluminium
Cover	Black finished aluminium
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm Case 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T222 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T120 Wise

thietbicongnghiepnang — 2019-06-28 08:58:34

Nhà phân phối đồng hồ đo nhiệt độ Wise Control tại Việt Nam

Service intended

Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation, and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter	75 and 100 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct
Case	304SS
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	Internal
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T120 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T219 Wise

thietbicongnghiepnang — 2019-06-28 08:57:24

Đồng hồ đo nhiệt độ T219 Wise Readmore

Liquid filled remote reading thermometer_T219

Service intended

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting lower back connection, flush, case center mounting bracket
Case	304SS
Cover	304SS
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	304SS, Black painted
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Filling liquid	Glycerin or silicone
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T219 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T213 Wise

thietbicongnghiepnang — 2019-06-28 08:55:48

Đồng hồ đo nhiệt độ T213 Wise Readmore

Remote reading thermometer with external mounting bracket on pipes and tanks_T213

Service intended

Liquid filled thermometer is used for measuring temperature of various pipes and tanks external in all industries, operated in aggressive and non-aggressive environment. Linear dials and temperature compensate line assure an accurate temperature indication at varying ambient conditions.

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale (Standard)
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	304SS
Cover	304SS
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 6.5/4.5 mm, 304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Mounting bracket	120 x 22 x 12 (mm) 316SS
Filled fluid in case	Glycerin or silicone (Option)
Zero adjustment	Internal
Stem connection	Surface mounting
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T213 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo nhiệt độ T212 Wise

thietbicongnghiepnang — 2019-06-28 08:54:55

Đồng hồ đo nhiệt độ T212 Wise Readmore

Remote reading thermometer with aluminium case_T212

Service intended

Nominal diameter	75, 100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting Lower back connection, flush, case lower mounting Lower back connection, flush, case center mounting
Case	Black finished aluminium
Cover	Black finished aluminium
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post Đồng hồ đo nhiệt độ T212 Wise appeared first on thietbicongnghiepnang.com.

T191 Wise | Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-06-28 08:53:38

T191 Wise | Đồng hồ đo nhiệt độ Wise Readmore

Hermetically sealed case bimetal thermometer with adjustable stem_T191

Service intended

Bimetal thermometer is used for measuring temperature of gas or fluid. This thermometer prevents entry of moisture into the casing, thus minimizing the possibility of icing or fogging inside the case.

Nominal diameter	75, 100, 125 and 150 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back with adjustable stem
Case	Hermetically sealed, 316L SS
Cover	Hermetically sealed, 316L SS
Window	Safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	External
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale Window : Safety glass Special range : 0 ~ 600 ℃

The post T191 Wise | Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

T150 Wise | Đồng hồ đo nhiệt độ nước Wise

thietbicongnghiepnang — 2019-06-28 08:52:22

T150 Wise | Đồng hồ đo nhiệt độ nước Wise Readmore

Euro gauge Bimetal thermometer_T150

Service intended (EN13190)

Bimetal thermometer is used for measuring temperature of gas or fluid. It is suitable for measurement, regulation and direct monitoring for the fluid. It meets the most stringent criteria on resistance to a corrosive atmosphere and exceptional climatic circumstances.

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Normal (1 year) : Measuring range Short time (24 hours) : Scale range
Ambient temperature	-20 ~ 60 °C
Degree of protection	EN60529/IEC529/IP65

Standard features

Location of stem	Center back with adjustable stem Center back Bottom
Case	304SS Bayonet type
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Micro adjustable aluminium pointer
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF G½B, G¾B
Option	Special accuracy : ±1.0 % of full scale

The post T150 Wise | Đồng hồ đo nhiệt độ nước Wise appeared first on thietbicongnghiepnang.com.

T120 Wise | Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-06-28 08:51:13

T120 Wise | Đồng hồ đo nhiệt độ Wise Readmore

The post T120 Wise | Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

T114 Wise | Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-06-28 08:50:02

T114 Wise | Đồng hồ đo nhiệt độ Wise Readmore

General service bimetal thermometer_T114

Service intended

Nominal diameter	75 and 100 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back connection, direct
Case	Nickel plated steel
Cover	Nickel plated steel
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.4 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 400 mm
Stem, process connection	¼", ⅜", ½" PT, NPT and PF

The post T114 Wise | Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

T112 Wise | Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-06-28 08:46:11

T112 Wise | Đồng hồ đo nhiệt độ Wise Readmore

Hermetically sealed case bimetal thermometer_T112

Service intended

Nominal diameter	65, 75, 100, 125 and 150 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back connection, direct
Case	Hermetically sealed, 316L SS
Cover	Hermetically sealed, 316L SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	External
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale Not available with diameter 65 mm

The post T112 Wise | Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

T111 Wise | Đồng hồ đo nhiệt độ hơi Wise

thietbicongnghiepnang — 2019-06-28 08:42:16

T111 Wise | Đồng hồ đo nhiệt độ hơi Wise Readmore

Industrial bimetal thermometer_T111

Service intended

Nominal diameter	75, 100, 125 and 150 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back connection, direct
Case	304SS
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	External
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

The post T111 Wise | Đồng hồ đo nhiệt độ hơi Wise appeared first on thietbicongnghiepnang.com.

R211, R212 Wise | Đầu dò nhiệt độ Wise

thietbicongnghiepnang — 2019-06-27 14:13:24

Đại lý phân phối WISE CONTROL Việt Nam

R210 series

R211 Wise, R212 Wise

Service intended

Among temperature sensors, it is the most stable and accurate sensor. It has a better repeatability, and shows more dependable outputs than thermocouple. It is possible to perform an area measuring, and has a better resistance against the containment. However, it has a slow response time due to its complexity of the resistance element and its big size. It is constructed with an insulated lead wire and with protection tube which is designed to protect the insulated lead wire.

Standard features

Element	Pt 100 Ω at 0 ℃ TCR : 3,850 ppm/k
Tolerances on temperature reading	Class A : ± (0.15 + 0.002 l t l) Class B : ± (0.3 + 0.005 l t l)
Head material	ALDC (Standard) 304SS (Not available compact type) 316SS (Not available compact type)
Temperature range	-200 ~ 250 ℃ (Mica type element) -200 ~ 600 ℃ (Film type element) • Class A (-90 ~ 300 °C) • ClassB (-200 ~ 600 °C)
Protecting tube material	304SS and 316SS
Protecting tube outer diameter	6.4, 8.0 and 10 mm

The post R211, R212 Wise | Đầu dò nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

R201, R202 Wise | Đầu dò củ hành Wise

thietbicongnghiepnang — 2019-06-27 14:09:14

Đại lý phân phối WISE CONTROL Việt Nam

The post R201, R202 Wise | Đầu dò củ hành Wise appeared first on thietbicongnghiepnang.com.

R120, R121, R122 Wise | Đầu dò nhiệt độ Wise

thietbicongnghiepnang — 2019-06-27 14:05:47

Đại lý phân phối WISE CONTROL Việt Nam

R120 sereis (R series)

Service intended

Sheath type thermocouple generally shares the similar principle of protection tube type thermocouple. However, it has a different construction. It is filled with inorganic insulating material between the thin wire and the metal sheath, and it shares the same body as one. Inside the thin stainless steel pipe, thermocouple element is located, and then stainless pipe is filled with a MgO. Normally, thermocouple is used with a thermowell. The advantages over protection tube types are it has a faster response time, it has a broader temperature range (-200 ~ 1,600 ℃), longer life, it can be bended to install according to its required installation site condition, a better mechanical strength, and a better internal pressure control.

Standard features

Element	K, E, J, T, N
Tolerances on temperature reading	Class 1, Class 2 (DIN/IEC584-2, BS/EN60584-2, JIS C1602) Special, Standard (ASTM E230 E988 ISA-MC96.1)
Head material	ALDC (Standard) 304SS (Not available compact type) 316SS (Not available compact type)
Hot junction shape	Grounded Ungrounded
Sheath outer diameters	1.0, 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5 and 12.7 mm Double element is not available for 1.0 and 1.6 mm sheath outer diameter
Certificates	KCS Ex d IIC T6

The post R120, R121, R122 Wise | Đầu dò nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

R971, R972 Wise | Đầu dò nhiệt độ Pt100 Wise

thietbicongnghiepnang — 2019-06-27 13:41:09

R971, R972 Wise | Đầu dò nhiệt độ Pt100 Wise Readmore

Đầu dò nhiệt độ Pt100 Wise

Explosion proof Non-metallic protection tube thermocouple_R970 series

Service intended

This thermocouple is the combination of a precious metal such as platinum and rhodium alloy with non-metallic materials such as alumina and ceramic which can withstand a high temperature. It is mainly used in a furnace, kilns, and a production line of glass and ceramic.

■ Furnaces, kilns and ovens
■ Furnaces with oxidizing and neutral atmosphere
■ Glass, fiber and ceramic industries

Standard features

Element	■ Type R (87 % Pt, 13 % Rh/Pt) ■ Type S (90 % Pt, 10 % Rh/Pt) ■ Type B (70 % Pt, 30 % Rh / 94 % Pt, 6 % Rh) ■ Type K
Tolerance on temperature reading	"K" type : Class 2 (0.75 %) Standard (0.75 %) "R", "S" type : Class 2 (0.25 %) Standard (0.5 %) "B" type : Class 3 (0.5 %) Standard (0.5 %)
Head material	ALDC (Standard) 316SS (Not available compact type)
Element outer diameter	"K" type : 3.2 mm "R", "S" and "B" type : 0.5 mm
Certificates	KCS Ex d IIC T6 IP65

Xem thêm chi tiết : TẠI ĐÂY

The post R971, R972 Wise | Đầu dò nhiệt độ Pt100 Wise appeared first on thietbicongnghiepnang.com.

R961, R962, R963, R964 Wise | Can nhiệt Wise

thietbicongnghiepnang — 2019-06-27 13:29:57

Đại lý WISE control Việt Nam

R960 Wise

R961, R962, R963, R964 Wise

Service intended

Protection tube type is constructed with the insulator which insulates the element wire, and with the protection tube which protects the insulator. To install this model on the process pipe or on the container, it normally attaches to a connector, a flange, or a compression fitting on the protection tube. It can be manufactured as it is required for its use. As its special features, it does not have any resistance issues with a lead wire, and its immediate response to a temperature change leads to a less error rate of temperature change in a broade range.

Standard features

Element	Thermocouple : K, E, J, T, N RTD : Pt 100 Ω at 0 ℃
Head material	ALDC (Standard) 316SS
Certificates	KCS Ex d e IIC T6 IP67
Tolerance on temperature reading	■ Thermocouple Class 1, Class 2 (DIN/IEC584-2, BS/EN60584-2, JIS C1602) Special, Standard (ASTM E230, E988, ISA-MC96.1) ■ RTD Class A : ±(0.15 + 0.002 l t l) Class B : ±(0.3 + 0.005 l t l)
Protecting tube outer diameter (RTD only)	6.4, 8.0 and 10 mm

Xem thêm chi tiết : TẠI ĐÂY

The post R961, R962, R963, R964 Wise | Can nhiệt Wise appeared first on thietbicongnghiepnang.com.

R941, R942, R943, R944 Wise | Đầu dò nhiệt độ Wise

thietbicongnghiepnang — 2019-06-27 11:55:19

Đại lý WISE control Việt Nam

R940 series (ETR series)

Service intended

Measuring the temperature in the area where combustible gas, particles and flammable liquid exist can be a very dangerous task. The electrical energy of measuring instrument is lower than electric motor, however, the malfunction of the instrument or the accident can cause to start the explosion. Therefore, ETR series is explosion proof type product which is designed to be used in a critical danger Zone 1 by acquiring IECEx and ATEX certification.

Certificates	ATEX II 2G Ex d IIC T6 Gb IECEx Ex d IIC T6 Gb
Ambient temperature	-40 ~ +65 ºC

Standard features

Element	■ Sheath type Thermocouple : K, E, J, T, N RTD : Pt 100 Ω at 0 ℃ ■ Non-metallic protection tube type Type R (87 % Pt, 13 % Rh/Pt) Type S (90 % Pt, 10 % Rh/Pt) Type B (70 % Pt, 30 % Rh / 94 % Pt, 6 % Rh) Type K
Head material	ALDC (Standard) 316SS
Tolerances on temperature reading	■ Sheath type - Thermocouple Class 1, Class 2 (DIN/IEC584-2, BS/EN60584-2, JIS C1602) Special, Standard (ASTM E230, E988, ISA-MC96.1) - R.T.D. Class A : ± (0.15 + 0.002 l t l) Class B : ± (0.3 + 0.005 l t l) ■ Non-metallic protection tube type "K" type : Class 2 (0.75 %) Standard (0.75 %) "R", "S" type : Class 2 (0.25 %) Standard (0.5 %) "B" type : Class 3 (0.5 %) Standard (0.5 %)

Xem thêm chi tiết : TẠI ĐÂY

The post R941, R942, R943, R944 Wise | Đầu dò nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

P931, P932, P933, P934 Wise | Chart recorder

thietbicongnghiepnang — 2019-06-27 11:00:58

Đại lý phân phối thiết bị Wise Control chính hãng tại Việt Nam

Chart recorder_P930 series

P931 Wise, P932 Wise, P933 Wise, P934 Wise

Service intended

P930 series pressure recorder provides a single or dual pen 200 mm circular chart recorder for measurement. It is suitable for hazardous environment such as gas or chemical process lines.

Nominal diameter	246 (W) X 271 mm (H)
Accuracy	±2.0 % of full scale
Scale range (MPa, kPa, bar)	Pressure : 0 ~ 5 kPa to 0 ~ 100 MPa
Working pressure	Steady pressure : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 ℃ Fluid : Max. 200 ℃

Standard features

Pressure connection	Stainless steel (316SS)
Element	Bourdon tube : Stainless steel (316SS) Bellows : Brass
Case and cover	ALDC 12.1 Hinged door
Window	Acrylic resin
Movement	Brass
Chart drive	1. Spring wound type : 24, 168 (7 day) hours rotation 2. Battery type : 30 min, 96 min, 1, 2, 4, 6, 8, 12 hours and 1, 2, 7, 8, 14, 16, 31, 32 days selectable for portable type
Chart paper	200 mm circular
Mounting	Surface mounting and portable type
Process connection	⅜", ½" PT, NPT and PF

The post P931, P932, P933, P934 Wise | Chart recorder appeared first on thietbicongnghiepnang.com.

R921, R922 Wise | Đầu dò nhiệt độ Wise

thietbicongnghiepnang — 2019-06-26 21:03:33

Tăng Minh Phát - Đại lý phân phối Wise Control tại Việt Nam 

Wise Control

Explosion proof type Sheathed thermocouple and resistance temperature detector with spring load_R921,R922 (RS series)

R921,R922 (RS series)

Generally, sheathed type temperature sensors are used with thermowell. To maximize the heat-transfer between sheath junction and thermowell, the sheath must be inserted as close as possible to the bottom of the well. However, it is not always possible to determine the actual distance between the end tip of the sheath and the bottom of the thermowell. Furthemore, heat expansion can damage the sheath which is located inside the thermowell. To prevent this uncertainty and the damage to the sheath, RS series employ the spring load type sheath. This spring load absorbs the impact to the sheath, and protects the sheath from the vibration. Moreover, it is designed to be used in an explosive area.

Standard features

Element	Thermocouple : K, E, J, T, N R.T.D. : Pt 100 Ω at 0 ℃ TCR : 3,850 ppm/k
Tolerances on temperature reading	■ Thermocouple Class 1, Class 2 (DIN/IEC584-2, BS/EN60584-2, JIS C1602) Special, Standard (ASTM E230 E988 ISA-MC96.1) ■ R.T.D. Class A : ± (0.15 + 0.002 l t l) Class B : ± (0.3 + 0.005 l t l)
Head material	ALDC (Standard) 316SS
Sheath outer diameters	■ Thermocouple 1.0, 1.6, 2.3, 3.2, 4.8, 6.4, 8.0, 9.5 and 12.7 mm * Double elements is not available for 1.0 and 1.6 mm sheath outer diameters ■ R.T.D. 3.2, 4.8, 6.4 and 8.0 mm
Certificates	KCS Ex d IIC T6 IP65

Xem thêm chi tiết : TẠI ĐÂY

The post R921, R922 Wise | Đầu dò nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

Đầu dò nhiệt độ R912 Wise

thietbicongnghiepnang — 2019-06-26 20:37:36

Tăng Minh Phát - Đại lý phân phối Wise Control tại Việt Nam 

R912 (with T900) | Wise Control

Head mounting type temperature transmitter (RTD only)_R912 (with T990)

Service intended

These transmitters are recommended be used in the situation where the application of RTD signals to carry to a long distance or to guard against the heavy electrical field noise. The transmitters convert RTD inputs to an analog signal for a direct interface with indicators, recorders, controllers, PLC, DCS systems, and these can be used for a wide range of applications in process control, automatic machinery and hydraulic or pneumatic system design.

Advantages

■ Two wire 4 - 20 mA current output signal
■ RTD input
■ Measuring range from -50 ~ 400 ℃
■ Fixed range
■ Excellent accuracy and long term stability
■ Low - cost
■ Miniature design

Standard features

Electrical specification	Excitation voltage : 18 ~ 30 V Load resistance : Max. 500 Ω at 24 V Influence of excitation : 0.01 % FSO/V Burnout : Upscale (Approx. 23 mA DC) or Down scale (Approx. 4 mA DC) Reverse polarity : Protected Shock resistance : No change in performance after 10Gs for 11ms Vibration : 5g (10 ~ 2,000 Hz) Response time (10 ~ 90 %) : ±0.5 seconds Adjustment range : ±15 % of full scale / Zero and span
Performance specification	Accuracy : ±0.2 % of full scale Non - linearity : Better than 0.10 % of full scale Repeatability : Better than 0.05 % of full scale Long term stability : Better than 0.05 % of full scale per month Ambient temperature limits : -20 ~ 70 ℃ Ambient humidity limits : 5 ~ 95 % R.H
Input	Measuring element : Pt 100 Ω at 0 ℃
Output	Current output Electrical connection type : 2-wire technique Full scale output signal : 20 mA ±0.2 % Zero measured output : 4 mA ±0.03 % Other output signals available on request
Certificates	KCS Ex d IIC T6

Xem thêm chi tiết : TẠI ĐÂY

The post Đầu dò nhiệt độ R912 Wise appeared first on thietbicongnghiepnang.com.

Đầu dò nhiệt độ R911 Wise

thietbicongnghiepnang — 2019-06-26 20:24:35

Tăng Minh Phát - Đại lý phân phối Wise Control tại Việt Nam 

Head mounting type multi temperature transmitter_R911 (with T900)

R911 (with T900) | Wise Control

Thường được sử dụng với T900 để truyền tín hiệu

Service intended

T900 series temperature transmitters are designed to fit into a standard molded terminal heads used on RTD and thermocouple assemblies to provide a 4-20 mA transmission signals. It is a cost effective solution for all temperature measuring process. It is accurate, durable and reliable. Numerous configurations for measurement in many deferent mediums are offered. Generally the transmitter produces a linear 4-20 mA output carried on a two-wire system. The transmitter is supplied factory calibrated, but also has zero and span potentiometers for a field adjustment.

Advantages

■ Two wire 4-20 mA current output signals
■ Universal input signals
- RTD temperature sensor
- T/C elements
- mV, V, mA, DC signals
■Programmable function setting
- Input signal type
- Measuring range
- Burnout Low/High setting
- mA output offset
■ Excellent accuracy and a long term stability
■ Low cost effective

Standard features

Electrical specification	Excitation voltage : 18 ~ 30 V DC (Noise range:20 mVp-p) Load resistance max : 600 Ω with 24 V Influence of excitation : 0.01 % FSO/V Reverse polarity : Protected Shock resistance : No change in performance after 20Gs Vibration : 0.1 g max. Response time (10 ~ 90 %) : ±500 mSec. Adjustment range : Free
Performance specification	Accuracy : ±0.2 % FSO Non - linearity : Better than 0.10 % FSO Repeatability : Better than 0.05 % FSO Long term stability : Better than 0.05% FSO per month Cutoff frequency : ±1 kHz Ambient temperature limits : -10 ~ 70 ℃ Ambient humidity limits : 10 to 90 % R.H
Input	Temperature sensor type : See table "Sensor type, range and accuracy" Signal source : See table "Sensor type, range and accuracy"
Output	Current output : 4 ~ 20 mA loop powered Electrical connection type : 2-wire technique Full scale output signal : 20 mA ±0.2 % Zero measured output : 4 mA ±0.03 % Sensor burnout : High (20.5 mA DC) or Low (3.9 mA)
Certificates	KCS Ex d IIC T6

Xem thêm chi tiết : TẠI ĐÂY

The post Đầu dò nhiệt độ R911 Wise appeared first on thietbicongnghiepnang.com.

GL-2L Wise - Bộ hiển thị tín hiệu GL-2L Wise

thietbicongnghiepnang — 2019-03-26 15:31:33

Bộ hiển thị tín hiệu 4-20mA Wise Control

Bộ hiển thị tín hiệu GL-2L Wise

Bộ hiển thị tín hiệu Wise nhận tín hiệu từ các thiết bị như cảm biến, pt100, RTD và chuyển các tín hiệu nhận được sang tín hiệu điện (4-20 mA), hoặc các tín hiệu khác theo nhu cầu của người sử dụng.

Descriptions

The GL-2L panel mounting digital indicator is designed to accept pressure or temperature transmitters and similar A wide range of application for industrial sensors providing current or voltage output signals. It is and commercial application where the an all new universal panel meter that handles all the visual reading of the field instruments common process display applications with simplicity, and monitoring reliability, accuracy and ease. The meter's universal power supply allows it to be powered 110 AC or 220 AC, and it can also be powered from 24V DC as an option.

GL-2L : Digital indicator

M Multi inputs

A   AC 110V~220V
D   DC 24V

Alarm output
   N   None
A           H/L 2 points
B           HH/H/LL/L 4 points

N   None
C   Retransmission output (4~20mA DC)
R   RS-485 Serial Communication
X   Other signal available on request

The post GL-2L Wise - Bộ hiển thị tín hiệu GL-2L Wise appeared first on thietbicongnghiepnang.com.

T110 Wise VietNam - Đồng hồ đo nhiệt độ Wise Control

thietbicongnghiepnang — 2019-02-21 00:01:34

Đại lý Wise tại Việt Nam chuyên cung cấp đồng hồ đo nhiệt độ, cảm biến nhiệt độ wise

Industrial bimetal thermometer_T110
T110 Wise

Service intended

Nominal diameter	50, 65, 75, 100, 125 and 150 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back connection, direct
Case	304SS
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	Internal
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale Not available with diameter 50 and 65 mm
Certificates	ATEX Ex II GD c IIC TX

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

Đồng hồ đo nhiệt độ chân sau Wise – Đồng hồ đo nhiệt độ dầu Wise – Đồng hồ đo nhiệt độ lò hơi Wise - Đồng hồ đo nhiệt độ lò nung Wise – Đồng hồ đo nhiệt độ dạng dây Wise - Đồng hồ đo nhiệt độ chất lỏng Wise – Đồng hồ đo nhiệt độ công nghiệp Wise

The post T110 Wise VietNam - Đồng hồ đo nhiệt độ Wise Control appeared first on thietbicongnghiepnang.com.

T123 Wise Việt Nam - Đồng hồ đo nhiệt độ Wise Việt Nam

thietbicongnghiepnang — 2019-02-20 23:59:09

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Sanitary bimetal thermometer (3-A Marking)_T123

T123 Wise

Service intended

Sanitary bimetal thermometer is used for measuring temperature of corrosive and contaminated materials. Its usage expands to food, beverage, biochemical and pharmaceutical industry.

Nominal diameter	75 and 100 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Bottom connection, direct
Case	304SS
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4 and 8.0 mm diameter 304SS, 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	Tri-clamp 1S, 1½S, 2S
Option	±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T123 Wise Việt Nam - Đồng hồ đo nhiệt độ Wise Việt Nam appeared first on thietbicongnghiepnang.com.

T140 Wise VietNam - Đầu hồ đo nhiệt độ Wise control

thietbicongnghiepnang — 2019-02-20 23:56:47

Đại lý phân phối Wise tại Việt Nam - Đồng hồ đo nhiệt độ Wise

Process industry bimetal thermometer_T140

Loại điều chỉnh được góc nghiêng của mặt đồng hồ

Mặt đồng hồ : 75,100, 125 & 150mm

Độ chính xác : ±2.0 %

Thang đo : 0-600^oC

Vật liệu : 304SS, 316SS & 316L SS

Kết nối : ¼", ⅜", ½", ¾" PT, NPT & PF

Đường kính que dò : 6.0, 6.4, 8.0, 10.0 mm

Chiều dài que dò : Max 2.000 mm

T140 Wise Vietnam

1. Base model

T140 : Process industry bimetal thermometer
2. Nominal diameter (mm)

3 75

4 100

5 125

6 150

3. Type of mounting

W Bottom connection, direct

4. Stem material

0 304SS

1 316SS

2 316L SS

5. Stem, process connection

A None

C ¼"

D ⅜"

E ½"

F ¾"
G 1½S (Only available with sanitary)

H 2S (Only available with sanitary
I 2½S (Only available with sanitary)

6. Stem connection type (CF: Compression fitting)

A None

B PF

C PT

D NPT

E CF + PT F CF + NPT

G CF + PF
H MT + PT (Movable thread)

I MT + NPT (Movable thread)

J MT + PF (Movable thread) S Clamp (Sanitary type flange)

7. Stem outer diameter (mm)
0 6.0

1 6.4

2 8.0

3 10.0 (Not available process connection, ¼")
Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T140 Wise VietNam - Đầu hồ đo nhiệt độ Wise control appeared first on thietbicongnghiepnang.com.

T190 Wise VietNam - Đồng hồ đo nhiệt độ Wise control

thietbicongnghiepnang — 2019-02-20 23:54:17

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Process industry bimetal thermometer with adjustable stem_T190

T190 Wise

Service intended

Nominal diameter	75, 100, 125 and 150 mm
Accuracy	±2.0 % of full scale
Temperature element	Coiled bimetal
Working range	Maximum scale value

Standard features

Location of stem	Center back with adjustable stem
Case	304SS, Adjustable on stem 90°
Cover	304SS
Window	Glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	6.0, 6.4, 8.0 and 10.0 mm diameter 304SS, 316SS and 316L SS Max. Insertion length : 2,000 mm
Zero adjustment	External
Stem, process connection	¼", ⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale Window : Safety glass Special range : 0 ~ 600 ℃

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T190 Wise VietNam - Đồng hồ đo nhiệt độ Wise control appeared first on thietbicongnghiepnang.com.

T210 Wise VietNam - Đồng hồ đo nhiệt độ dạng dây dẫn Wise

thietbicongnghiepnang — 2019-02-20 23:52:01

Đồng hồ đo nhiệt độ T210 Wise : đo nhiệt độ nước, đo nhiệt độ hơi...

Remote reading thermometer_T210

T210 Wise

Service intended

Nominal diameter	100 and 150 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting lower back connection, flush, case center mounting
Case	304SS
Cover	304SS
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	304SS, Black painted
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T210 Wise VietNam - Đồng hồ đo nhiệt độ dạng dây dẫn Wise appeared first on thietbicongnghiepnang.com.

T521, T522, T523, T524, T525, T526 WISE VIETNAM

thietbicongnghiepnang — 2019-02-20 23:48:13

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Euro gauge Electrical contact type temperature gauge_T521(H), T522(H/L), T523(L), T524(H/HH), T525(L/LL), T526(H/L)

T521(H), T522(H/L), T523(L), T524(H/HH), T525(L/LL), T526(H/L)

Service intended

Contact type temperature gauge is installed with electric contact actuated by pointer. It provides the function which electrical circuit can be opened or closed by manual set point. It is applicable where signal is required (Audible or visual alarm) for control of resistance or any other application with auxiliary relay and contact.

Nominal diameter	100 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting
Case	304SS
Cover	304SS Bayonet type
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Safety glass Polycarbonate
Dial	White aluminium with black graduations
Contacts	Maximum voltage : 250 V AC Contact rating : AC 220 V, 0.25 A DC 100 V, 0.5 A With max. no of contact : 2 sets per gauge
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T521, T522, T523, T524, T525, T526 WISE VIETNAM appeared first on thietbicongnghiepnang.com.

T230 Wise Vietnam - Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-02-20 23:45:41

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Euro gauge Remote reading thermometer_T230

T230 Wise

Service intended

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting Lower back connection, flush, case center mounting
Case	304SS
Cover	304SS Bayonet type
Window	Tempered safety glass
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored : 7.5/5.5 mm, 304SS
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale Window : Safety glass Special range : 0 ~ 700 ℃

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T230 Wise Vietnam - Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

T239 Wise VietNam - Đồng hồ đo nhiệt độ nước Wise

thietbicongnghiepnang — 2019-02-20 23:43:20

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Euro gauge Liquid filled remote reading thermometer_T239

T239 Wise

Service intended

Nominal diameter	100 and 160 mm
Accuracy	±2.0 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C Inert gas : -200 ~ 700 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Bottom connection, surface, case mounting Lower back connection, flush, case center mounting
Case	304SS
Cover	304SS Bayonet type
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Tempered safety glass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Filling liquid	Glycerin or silicone
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	Special accuracy, ±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T239 Wise VietNam - Đồng hồ đo nhiệt độ nước Wise appeared first on thietbicongnghiepnang.com.

T263 Wise VietNam - Đồng hồ đo nhiệt độ Wise

thietbicongnghiepnang — 2019-02-20 23:37:14

Đại lý Wise Việt Nam - Đồng hồ đo nhiệt độ Wise

Heavy duty service remote reading thermometer_T263

T263 Wise

Service intended

This thermometer is designed to withstand the shock and vibration inherent in heavy duty services.

Nominal diameter	80 mm
Accuracy	±1.5 % of full scale
Measuring system (SAMA class ⅢB)	Organic gas : 0 ~ 200 °C
Working range	Maximum scale value

Standard features

Location of stem and mounting	Certer back connection, flush, cover mounting
Case and cover	Black finished bronze
Capillary	Capillary : 1.6/0.2 mm, 316SS Armored tube : 7.5/5.5 mm, 304SS
Window	Laminated safety glass
Dial	White aluminium with black graduations
Movement	Stainless steel Damper vibration and pulsation
Pointer	Black painted aluminium alloy
Stem	8.0, 10.0 and 12.0 mm 316SS and 316L SS
Zero adjustment	Internal
Stem, process connection	⅜", ½", ¾" PT, NPT and PF
Option	±1.0 % of full scale

Các sản phẩm chính của đồng hồ đo nhiệt độ Wise:

The post T263 Wise VietNam - Đồng hồ đo nhiệt độ Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P110 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 15:02:35

Đồng hồ đo áp suất nước Wise Control 

Đại lý Wise tại Việt Nam

Đồng hồ áp suất Wise P110 | P110 Wise Vietnam

Đồng hồ đo áp suất nước P110 Wise, Đồng hồ đo áp suất thấp P110 Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp P110 Wise control.

General service pressure gauge_P110 series ( Đồng hồ áp suất Wise)

Service intended

P110 Wise are a general service pressure gauge. P110 is a low cost and features high quality parts. It is suitable for a non-corrosive fluid. Air, oil, gas or water services are the most common applications.

Đường kính mặt : 40, 50, 60, 75, 100, 150 and 200 mm

Độ chính xác : 40 mm : ±3.0

50, 60, 75, 100, 150 and 200 mm : ±1.5 %

Vật liệu Vỏ : Thép sơn đen, Inox304

Thang đo: 40 mm : 0 ~ 0.2 to 0 ~ 3.5 MPa
               50 mm : 0 ~ 0.2 to 0 ~ 10 MPa
               60 and 75 mm : -0.1 ~ 0 to 0 ~ 25 MPa
               100 mm (New) : -0.1 ~ 0 to 0 ~ 35 MPa
               100 and 150 mm : -0.1 ~ 0 to 0 ~ 100 MPa
               200 mm : -0.1 ~ 0 to 0 ~ 35 MPa

Kết nối : chân đứng, chân sau

Ren : 40 mm : ⅛" PT, NPT and PF
        50 mm : ¼", ⅛" PT, NPT and PF
        60 mm : ¼" PT, NPT and PF
        75 and 100 mm (New) : ⅜" PT, NPT and PF
       100, 150 and 200 mm : ½", ⅜" PT, NPT and PF

CÁCH CHỌN ĐỒNG HỒ ĐO ÁP SUẤT P110 WISE
P110 : GENERAL SERVICE PRESSURE GAUGE
1. NOMINAL DIAMETER
0 : 40mm
1 : 50mm
2 : 60mm
3 : 75mm
4 : 100mm
6 : 150mm
7 : 200mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
A : Bottom Connection, Direct, Not available with Diameter 200mm
B : Bottom Connection, Surface, Case Mounting Plate, Not available with Diameter 40mm
F : Centre Back Connection, Direct, Not available with Diameter 100mm and 150mm and 200mm G : Lower Back Connection, Direct, Only available with Diameter 100mm and 150mm
J : Centre Back Connection, Flush, Cover Mounting Plate, Not available with Diameter 40mm, 100mm, 150mm and 200mm
N : Lower Back Connection, Cover Mounting Plate, Only available with Diameter 100mm and 150mm

3. ACCURACY
4 : ±1.5% of Full Scale. Not available with diameter 40mm 6 : ±3.0% of Full Scale

4. PROCESS CONNECTION
B : 1/8”, Only available with diameter 40,50mm

C : 1/4”, Only available with diameter 50,60mm

D : 3/8”, Not available with diameter 40,50,60mm

E : 1/2”, Only available with diameter 100,150,200mm
5. CONNECTION TYPE
B: PF

C: PT

D : NPT

Z : Other
6. UNIT
B : kgf/cm2(Pressure) or cmHg + kgf/cm2(Compound)

C: cmHg, Only available with vacuum gauge

Z : Other

7. RANGE
Refer to Pressure Range Table

8. DIAL COLOR
1 : 2 Colors
5 : 3 Colors, Available with Compound & Vacuum Gauges

9. OPTIONS
0 : None
1 : Accessories

SAMPLE MODEL NUMMBER :

Thang đo P110 Wise Vietnam

Range and code	Unit and code			40 mm	50 mm	60 mm	75 mm100	mm (new)	100 mm	150 mm	200 mm
Range and code	H : bar	I : MPa	J : kPa	40 mm	50 mm	60 mm	75 mm100	mm (new)	100 mm	150 mm	200 mm
026	-1 ~ 0	-0.1 ~ 0	-100 ~ 0	X	X	O	O	O	O	O	X
041	0 ~ 1	0 ~ 0.1	0 ~ 100	X	X	O	O	O	O	O	X
042	0 ~ 2	0 ~ 0.2	0 ~ 200	O	O	O	O	O	O	O	O
043	0 ~ 3	0 ~ 0.3	0 ~ 300	X	O	O	O	O	O	O	O
044	0 ~ 4	0 ~ 0.4	0 ~ 400	O	O	O	O	O	O	O	O
045	0 ~ 6	0 ~ 0.6	0 ~ 600	O	O	O	O	O	O	O	O
047	0 ~ 10	0 ~ 1	0 ~ 1,000	O	O	O	O	O	O	O	O
050	0 ~ 15	0 ~ 1.5	X	O	O	O	O	O	O	O	O
051	0 ~ 20	0 ~ 2	X	O	O	O	O	O	O	O	O
052	0 ~ 25	0 ~ 2.5	X	O	O	O	O	O	O	O	O
054	0 ~ 35	0 ~ 3.5	X	O	O	O	O	O	O	O	O
055	0 ~ 50	0 ~ 5	X	O	O	O	O	O	O	O	O
057	0 ~ 70	0 ~ 7	X	X	O	O	O	O	O	O	O
058	0 ~ 100	0 ~ 10	X	X	O	O	O	O	O	O	O
059	0 ~ 150	0 ~ 15	X	X	X	O	O	O	O	O	O
062	0 ~ 250	0 ~ 25	X	X	X	O	O	O	O	O	O
064	0 ~ 350	0 ~ 35	X	X	X	X	X	O	O	O	O
066	0 ~ 500	0 ~ 50	X	X	X	X	X	X	O	O	X
068	0 ~ 700	0 ~ 70	X	X	X	X	X	X	O	O	X
070	0 ~ 1,000	0 ~ 100	X	X	X	X	X	X	O	O	X
027	-1 ~ 1	-0.1 ~ 0.1	-100 ~ 100	X	X	O	O	O	O	O	X
028	-1 ~ 2	-0.1 ~ 0.2	-100 ~ 200	X	X	O	O	O	O	O	X
029	-1 ~ 3	-0.1 ~ 0.3	-100 ~ 300	X	X	O	O	O	O	O	X
030	-1 ~ 4	-0.1 ~ 0.4	-100 ~ 400	X	X	O	O	O	O	O	X
031	-1 ~ 6	-0.1 ~ 0.6	-100 ~ 600	X	X	O	O	O	O	O	X
032	-1 ~ 10	-0.1 ~ 1	-100 ~ 1,000	X	X	O	O	O	O	O	X
033	-1 ~ 15	-0.1 ~ 1.5	-100 1.5MPa	X	X	O	O	O	O	O	X
034	-1 ~ 20	-0.1 ~ 2	-100 ~ 2MPa	X	X	O	O	O	O	O	X

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise

Xem thêm chi tiết : TẠI ĐÂY

The post Đồng hồ đo áp suất P110 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P111 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 15:46:41

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Đồng hồ đo áp suất Wise P111 _ P111 Wise Vietnam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise.

Ammonia service pressure gauge_P111 series

Service intended

P111 series are designed to withstand the shock, the vibration, and the pulsation which could be generated from the agricultural ammonia equipment.

Nominal diameter	60, 75 and 100 mm
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 1, 1.5, 2 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 ℃ Fluid : Max. 200 ℃
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	316SS
Element	316SS C type bourdon tube
Case	Black finished steel
Cover	Black finished steel
Window	Glass
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	¼" PT, ⅜" PT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P111 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P112 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 16:42:06

Đại lý Wise Control Việt Nam

Datasheet

Bourdon tube pressure gauge_P112 series

P112 series

Đồng hồ đo áp suất P112 Wise | P112 Wise Việt Nam | Đồng hồ áp suất Wise

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P112 series are designed to withstand the shock, the vibration and the pulsation which could be generated from freon gas service.

Nominal diameter	60 and 75 mm
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	60mm : -0.1 ~ 0.2, 0.4, 1.0, 1.5, 2.0 MPa 0 ~ 2.5, 0 ~ 3.5 MPa 75mm : -0.1 ~ 0.2, 0.4, 1.5 MPa 0 ~ 3.5 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 60 ℃ Fluid : Max. 60 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10℃ of full scale

Standard features

Pressure connection	Brass
Element	Brass C type bourdon tube
Case	Black finished steel
Window	Polycarbonate (60 mm) Glass (Only 75 mm)
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	7/16" UNF ¼" PT, NPT and PF ⅜" PT, NPT and PF (Only 75 mm)

Các thiết bị khác của Wise : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

Xem thêm về đồng hồ áp suất Wise : TẠI ĐÂY

The post Đồng hồ đo áp suất P112 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P113 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 15:55:48

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đại lý Wise Việt Nam

Đồng hồ đo áp suất Wise P113 | P113 Wise Vietnam | Đồng hồ áp lực Wise

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise.

Air regulator service pressure gauge fully stainless steel wetted parts_P113 series

Service intended

P113 series are specifically designed for CDA (Clean dry air) application regulators used in electronic, medical, biotechnology and pharmaceutical industry

Nominal diameter	50 mm (2")
Accuracy	±1.6 % of full scale
Scale range (MPa, bar)	0 ~ 40 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 ℃ Fluid : Max. 200 ℃
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	316SS
Element	316SS <6 MPa : C-type bourdon tube ≥6 MPa : Helical type bourdon tube
Case	304SS
Movement	Brass
Dial	White aluminium with pointer stop pin With black/red lettering, dual pressure scale (bar/psi and MPa/bar)
Ring and window	Twist-lock polycarbonate
Pointer	Black painted aluminium alloy
Process connection	¼" NPT

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P113 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

P140 Wise Vietnam - Đồng hồ đo áp suất thấp P140 Wise

thietbicongnghiepnang — 2019-02-20 16:37:07

Đại lý Wise Control Việt Nam

General purpose pressure gauge_P140 series

P140 Wise

Đồng hồ đo áp suất P140 Wise _P140 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P140 series are designed to withstand a severe weather conditions and the rust under chemical or petrochemical circumstances allowing continuous exposure to the atmosphere.

Nominal diameter	60 and 100 mm
Accuracy	60 and 100 mm : ±1.5 % of full scale
Scale range (MPa, kPa, bar)	60 mm : -0.1 ~ 0 to 0 ~ 25 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 60 ℃ Fluid : Max. 60 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Brass
Element	C type bourdon tube 60 and 100 mm : ≤10 MPa : Brass ＞10 MPa : 316SS
Case	Polycarbonate
Cover	Polycarbonate
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	60 mm : ¼" PT, NPT and PF 100 mm : ⅜" PT, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P140 Wise Vietnam - Đồng hồ đo áp suất thấp P140 Wise appeared first on thietbicongnghiepnang.com.

P228 Wise Vietnam - Đồng hồ đo áp suất công nghiệp Wise

thietbicongnghiepnang — 2019-02-20 16:26:38

Đại lý Wise Control Việt Nam

Datasheet

P228 series

Đồng hồ đo áp suất P228 Wise _P228 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P228 series are designed to meet the general requirements of a process industry, and it could provide a remote or a local indication.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	0 ~ 10 % square root scale 0 ~ 100 % linear scale
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 200 °C
Degree of protection	EN60529/IEC529/IP65
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) C type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS)
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	¼", ⅜", ½" PT, NPT and PF ¼" PT(F), ¼" NPT(F)
Process input	0.02 ~ 0.1 MPa

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P228 Wise Vietnam - Đồng hồ đo áp suất công nghiệp Wise appeared first on thietbicongnghiepnang.com.

P163 Wise Vietnam - Đồng hồ đo áp suất công nghiêp Wise P163

thietbicongnghiepnang — 2019-02-20 16:35:31

Đại lý Wise Control Việt Nam

Datasheet

P163 series

Đồng hồ đo áp suất P163 Wise _P163 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P163 series are designed to withstand the shock, the vibration, and the pulsation which could be generated from heavy duty services.

Nominal diameter	80 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 6 MPa
Working temperature	Ambient : -20 ~ 60 ℃ Fluid : Max. 60 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Brass
Element	Brass
Case	Bronze
Cover	Black finished bronze
Window	Laminated safety glass
Movement	304SS Dampers vibration and pulsation
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	⅛" PT, NPT and PF ¼" PT, NPT and PF ⅜" PT, NPT and PF M12 x 1.5

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P163 Wise Vietnam - Đồng hồ đo áp suất công nghiêp Wise P163 appeared first on thietbicongnghiepnang.com.

P170 Wise Vietnam - Đồng hồ đo áp suất có màng Wise

thietbicongnghiepnang — 2019-02-20 16:32:36

Đại lý Wise Control tại Việt Nam

P170 series

Đồng hồ đo áp suất P170 Wise _P170 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P170 series are designed to withstand corrosive, contaminated, or heterogeneous pressure media by employing the welded bellows. Especially, it can be used for water treatment process machines and sludge water lines.

Nominal diameter	75 and 100 mm
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 2.5 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 65 ℃ Fluid : Max. 100 ℃
Special features	Design with internal diaphragm, upper and lower housing welded Excellent cost-performance ratio
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Upper and Under flange : 304SS
Element	Diaphragm : 316L SS
Case	Black painted steel
Cover	Black painted steel
Window	Glass
Movement	Brass
Pointer	Black painted aluminium alloy
Process connection	¼" PT, NPT and PF ⅜" PT, NPT and PF
Option	Dial size : 60 and 75 mm Another process connection size and type

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P170 Wise Vietnam - Đồng hồ đo áp suất có màng Wise appeared first on thietbicongnghiepnang.com.

P222 Wise VietNam - Đồng hồ đo áp Wise Control

thietbicongnghiepnang — 2019-02-20 16:30:26

Đại lý Wise Control Việt Nam

Datasheet

P222 series

Đồng hồ đo áp suất P222 Wise _P222 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P222 are suitable to be used in a corrosive environment, chemical, petro-chemical, refining facilities, power generation, marine and foods industry. Its stainless steel case and cover have a good appearance and an excellent protection against corrosion and chemical attack.

Nominal diameter	125 mm (4½")
Accuracy	±0.5 % of full scale ±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C -20 ~ 65 °C (With glycerin filling) -40 ~ 65 °C (With silicone filling) Fluid : Max. 200 °C Max. 100 °C (With glycerin filling) Max. 100 °C (With silicone filling)
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	316SS ＜10 MPa : C type bourdon tube ≥ 10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Window	Safety glass
Blowout protection	Back, rubber disc
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	⅜", ½" PT, NPT and PF
Zero adjustment	Internal : Micro zero adjustable pointer

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P222 Wise VietNam - Đồng hồ đo áp Wise Control appeared first on thietbicongnghiepnang.com.

P229 Wise Việt Nam - Đồng hồ đo áp suất chân không Wise

thietbicongnghiepnang — 2019-02-20 16:24:49

Đại lý Wise Control Việt Nam

Datasheet

P229 series

Đồng hồ đo áp suất P229 Wise _P229 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P229 series are designed to be used in instrument shops, laboratories and for other critical applications where a high degree of accuracy is required.

Nominal diameter	160 mm
Accuracy	±0.5 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 0.1 to 0 ~ 200 MPa
Working pressure	Full scale value
Working temperature	Ambient : -40 ~ 65 °C -20 ~ 65 °C (With glycerin filling) -40 ~ 65 °C (With silicone filling) Fluid : Max. 200 °C Max. 100 °C (With glycerin filling) Max. 100 °C (With silicone filling)
Degree of protection	EN60529/IEC529/IP65
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS)
Window	Laminated safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Zero adjustment	Internal : Micro zero adjustable pointer
Process connection	¼", ⅜", ½" PT, NPT and PF
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H ATEX Ex II GD c IIc TX
Option	Pressure connection and element : Monel

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P229 Wise Việt Nam - Đồng hồ đo áp suất chân không Wise appeared first on thietbicongnghiepnang.com.

P239 Wise VietNam - Đại lý Wise Control Việt Nam

thietbicongnghiepnang — 2019-02-20 16:23:18

Đại lý Wise tại Việt Nam

Datasheet

Đại lý Wise Việt Nam - Đại lý phân phối Wise control tại Việt Nam

Đồng hồ đo áp suất P239 Wise _P239 Wise Việt Nam _ Đại lý Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Đồng hồ đo áp suất P239 gồm 2 loại chính : P239 đường kính mặt 160mm và P239 đường kính mặt 250mm

Service intended

P239 test pressure gauges are designed to check the accuracy of pressure instruments. Its use expands to a laboratory instruments for research shops and test labs. External adjustable dial and zero adjustable pointers are available for some models. It is an excellent choice for the process applications where high accuracy is a must.

Nominal diameter	160 and 250 mm
Accuracy	±0.25 % of full scale
Scale range (MPa, kPa, bar)	0 ~ 60 kPa to 0 ~ 100 MPa
Working pressure	Steady : Full scale value
Working temperature	Ambient : -40 ~ 65 ℃ Medium : Max. 100 ℃
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <100 bar : C type bourdon tube ≥100 bar : Helical type bourdon tube
Case	160 mm - Stainless steel (304SS) 250 mm - Black painted aluminium, Solid front
Cover	160 mm - Stainless steel (304SS), Bayonet type 250 mm - Black painted aluminium
Window	Safety glass
Movement	Brass
Dial	270° mirror band scale White aluminium with black graduations
Pointer	Black painted aluminium alloy
Zero adjustment	Internal (160 mm) External (250 mm)
Process connection	⅜", ½" PT, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P239 Wise VietNam - Đại lý Wise Control Việt Nam appeared first on thietbicongnghiepnang.com.

P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise

thietbicongnghiepnang — 2019-02-20 15:15:58

Đại lý phân phối đồng hồ đo áp suất, đồng hồ đo áp lực của hãng Wise tại Việt Nam

Đồng hồ áp suất Wise P252

Công Ty Tăng Minh Phát - Đại lý Wise Control chính hãng tại Việt Nam | Wise Vietnam

Mục lục nội dung:

P252 Wise | Pressure Gauge
Cách chọn đồng hồ áp suất P252 Wise
Một số model P252 thường dùng

1. P252 Wise | Pressure Gauge

Euro gauge Industrial service pressure gauge - P252 Wise Việt Nam

P252 series are suitable for a corrosive environment. Typical application includes: Chemical, petro-chemical, refining process, power generation, marine and foods industry. Its stainless case and cover have a good appearance and the excellent proof against corrosive and chemical attack.

Đồng hồ áp suất P252 Wise phù hợp để sử dụng trong môi trường ăn mòn, môi trường độc hại, nhiều bụi bẩn. P252 Wise loại có dầu ,tác dụng chống sốc, chịu nhiệt, có độ ổn định và độ chính xác cao.

Đồng hồ đo áp suất có dầu P252 Wise , Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc, Đồng hồ đo áp suất chân không, P252 Wise VietNam

Hướng dẫn cách chọn đồng hồ đo áp suất Wise

Đồng hồ áp suất Wise P252

2. Cách chọn đồng hồ áp suất P252 Wise

P252 : INDUSTRIAL SERVICE PRESSURE GAUGE

1. NOMINAL DIAMETER
2 : 63mm
3 : 80mm
4 : 100mm
6 : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
A : Bottom Connection, Direct
B : Bottom Connection, Surface, Case Mounting Plate
F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm N: Lower back Connection, Flush, Cover Mounting Plate
V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm W : Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
3 : 1.0 Per DIN16 005, Not available with diameter 63 & 80mm
4 : 1.6 Per DIN16 005, Only available with diameter 63 & 80mm

4. CONNECTION
C : 1/4”, Only available with diameter 63mm D : 3/8”, Not available with diameter 63mm
E : 1/2”, Not available with diameter 63 & 80mm

5. CONNECTION TYPE
B : PF C: PT D: NPT
F : BSPT G: BSP
Z : Other

6. UNIT
B : kgf/cm2 H : bar

7. RANGE
Refer to Pressure Range Table Below

8. PRESSURE CONNECTION MAT’L & DIALS
3 : 316SS & 2 Colors
7 : 316SS & 3 Colors, Available with Compound and Vacuum Gauges
Z : MONEL

9. OPTIONS
0 : None
1 : Accessories

Example : P2524A3EDG026700, P2522A4CDI044300, P2524A3EDB04730, P2524N3EDI05630, P2524A3EGH047300, P2524A3EGH143300, P2522F4CCB047300, P2524A3EDB04330, P2524A3EDB04530, P2524A3EDB05430, P2524A3EDB028300
P2524A3EDB041300, P2524A3EDB043300, P2524A3EDB044300, P2524A3EDB045300, P2524A3EDB050300, P2524A3EDB051300, P2524A3EDB054300

Thang đo đồng hồ đo áp suất P252 Wise

	SCALE (bar)	63mm	80mm	100mm	160mm	ORDERCODE
VACUUM GAUGE	-1~0	○	○	○	○	026
PRESSURE GAUGE	0~1	○	○	○	○	041
	0~1.6	○	○	○	○	133
	0~2.5	○	○	○	○	134
	0~4	○	○	○	○	044
	0~6	○	○	○	○	045
	0~10	○	○	○	○	047
	0~16	○	○	○	○	143
	0~25	○	○	○	○	052
	0~40	○	○	○	○	151
	0~60	○	○	○	○	056
	0~100	○	○	○	○	058
	0~160	○	○	○	○	060
	0~250	○	○	○	○	062
	0~400	○	○	○	○	065
	0~600	○	○	○	○	067
	0~1000	○	○	○	○	070
	0~1600	×	×	○	○	074
COMPOUN DGAUGE	-1~1.5	○	○	○	○	007
	-1~3	○	○	○	○	029
	-1~5	○	○	○	○	010
	-1~9	○	○	○	○	014
	-1~15	○	○	○	○	033

3. Một số model P252 thường dùng

Đồng hồ đo áp suất P252 Wise - P252 Wise Việt Nam
P2524A3EDB04730	P2524A3EDH04730	P2524A3EDIH04730
P2524A3EDB02630	P2524A3EDH02630	P2524A3EDI02630
P2524A3EDB12330	P2524A3EDH12330	P2524A3EDI12330
P2524A3EDB04130	P2524A3EDH04130	P2524A3EDI04130
P2524A3EDB13330	P2524A3EDH13330	P2524A3EDI13330
P2524A3EDB04230	P2524A3EDH04230	P2524A3EDI04230
P2524A3EDB13430	P2524A3EDH13430	P2524A3EDI13430
P2524A3EDB04530	P2524A3EDH04530	P2524A3EDI04530
P2524A3EDB05030	P2524A3EDH05030	P2524A3EDI05030
P2524A3EDB14330	P2524A3EDH14330	P2524A3EDI14330
P2524A3EDB05130	P2524A3EDH05130	P2524A3EDI05130
P2524A3EDB05230	P2524A3EDH05230	P2524A3EDI05230
P2524A3EDB05430	P2524A3EDH05430	P2524A3EDI05430
P2524A3EDB05530	P2524A3EDH05530	P2524A3EDI05530
P2524A3EDB05830	P2524A3EDH05830	P2524A3EDI05830
P2524A3EDB06630	P2524A3EDH06630	P2524A3EDI06630
P2524A3EDB2730	P2524A3EDH2730	P2524A3EDI2730
P2524A3DDB04730	P2524A3DDH04730	P2524A3DDIH04730
P2524A3DDB02630	P2524A3DDH02630	P2524A3DDI02630
P2524A3DDB12330	P2524A3DDH12330	P2524A3DDI12330
P2524A3DDB04130	P2524A3DDH04130	P2524A3DDI04130
P2524A3DDB13330	P2524A3DDH13330	P2524A3DDI13330
P2524A3DDB04230	P2524A3DDH04230	P2524A3DDI04230
P2524A3DDB13430	P2524A3DDH13430	P2524A3DDI13430
P2524A3DDB04530	P2524A3DDH04530	P2524A3DDI04530
P2524A3DDB05030	P2524A3DDH05030	P2524A3DDI05030
P2524A3DDB14330	P2524A3DDH14330	P2524A3DDI14330
P2524A3DDB05130	P2524A3DDH05130	P2524A3DDI05130
P2524A3DDB05230	P2524A3DDH05230	P2524A3DDI05230
P2524A3DDB05430	P2524A3DDH05430	P2524A3DDI05430
P2524A3DDB05530	P2524A3DDH05530	P2524A3DDI05530
P2524A3DDB05830	P2524A3DDH05830	P2524A3DDI05830
P2524A3DDB06630	P2524A3DDH06630	P2524A3DDI06630
P2524A3DDB2730	P2524A3DDH2730	P2524A3DDI2730

P252 hàng có sẵn tại kho TMP

Các thiết bị khác của hãng Wise Control : Đồng hồ đo nhiệt độ Wise, đồng hồ đo lưu lượng Wise, đầu dò nhiệt độ Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P252 Wise VietNam - Đồng hồ đo áp suất P252 Wise appeared first on thietbicongnghiepnang.com.

P253 Wise VietNam - Đồng hồ đo áp suất P253 Wise

thietbicongnghiepnang — 2019-02-20 15:22:03

Đại lý Wise Control Việt Nam

Datasheet

P221, P253 series

Đồng hồ đo áp suất có dầu P253 Wise _P253 Wise Việt Nam _ Đại lý Wise Việt Nam,Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Service intended

P221 and P253 series are suitable to be used in a corrosive environment, chemical, petro-chemical, refining facilities, power generation and marine and foods industry. Its stainless steel case and cover have a good appearance and an excellent protection against corrosion and chemical attack.

Nominal diameter	40 and 50 mm
Accuracy	40 mm : ±3.0 % of full scale 50 mm : ±1.5 % of full scale
Scale range (MPa, kPa, bar)	0 ~ 0.2, 0.3, 0.4, 0.6, 1, 1.5, 3.5 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : Model P221 : -40 ~ 65 °C Model P253 : -20 ~ 60 °C Fluid : Model P221 : Max. 200 °C Model P253 : Max. 60 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Model P221 : Stainless steel (316SS) Model P253 : Nickel plated brass
Element	C type bourdon tube Model P221 : Stainless steel (316SS) Model P253 : Brass
Case	Stainless steel (304SS)
Cover	40 mm : Stainless steel (304SS) and polycarbonate 50 mm : Stainless steel (304SS)
Window	Polycarbonate (40 and 50 mm)
Movement	Model P221 : Stainless steel Model P253 : Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	⅛", ¼" PT, NPT and PF
Option	Window : Safety glass with 304 stainless steel cover

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P110 Wise

The post P253 Wise VietNam - Đồng hồ đo áp suất P253 Wise appeared first on thietbicongnghiepnang.com.

P254 Wise VietNam - Đồng hồ đo áp suất nước Wise Việt Nam

thietbicongnghiepnang — 2019-02-20 15:25:40

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

General service liquid filled pressure gauge_P254 series

P254 series

Service intended

P254 series are designed to measure a high dynamic pressure load and it can be used where severe vibrations are present. It is recommended to be used with a gaseous and a liquid media that are not highly viscous and not to be used where copper alloy parts could be corroded. Its application extends to hydraulics, compressors and shipbuilding.

Nominal diameter	50, 63, 75 and 100 mm
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 40 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 60 ℃ -20 ~ 60 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 60 ℃
Fluid	Glycerin
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Brass (50 and 63 mm) Nickel plated brass (75 and100 mm)
Element	Brass <6 MPa : C type bourdon tube ≥6 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Crimp ring type
Window	Polycarbonate (50 and 63 mm) Safety glass (75 and100 mm)
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	50 and 63 mm : ⅛", ¼" PT, NPT and PF 75 mm : ¼", ⅜" PT, NPT and PF 100 mm : ¼", ⅜", ½" PT, NPT and PF One piece type connection (50 and 63 mm) Two piece type connection (75 and 100 mm)

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P254 Wise VietNam - Đồng hồ đo áp suất nước Wise Việt Nam appeared first on thietbicongnghiepnang.com.

P255 Wise VietNam - Đồng hồ đo áp suất thấp Wise

thietbicongnghiepnang — 2019-02-20 15:33:47

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Crimped-on-ring case pressure gauge_P255

P255-fully stainiess steel construction

Service intended

P255 liquid filled series are suitable for applications with high dynamic pressure loads or vibrations. It is suitable for corrosive environments and gaseous or liquid media that will not obstruct the pressure system. Suitable for machinary industry and parts for various facilities and equipments.

Nominal diameter	63, 80 and 100 mm
Accuracy	63 and 80 mm : ±1.6 % of full scale 100 mm : ±1.0 % of full scale
Scale range (MPa, kPa, bar)	63 and 80 mm : -0.1 ~ 0 to 0 ~ 100 MPa 100 mm : -0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 ℃ -20 ~ 65 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 200 ℃ Max. 100 ℃ (With glycerin filling) Max. 100 ℃ (With silicone filling)
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	63 and 80 mm : ≤0.3 MPa : C type bourdon tube (316SS) ≥0.4 and＜6 MPa : C type bourdon tube (304SS) ≥6 MPa : Helical type boudon tube (316SS) 100 mm : ≤0.1 MPa : C type bourdon tube (316SS) ≥0.2 and ＜10 MPa : C type bourdon tube (304SS) ≥10 MPa : Herical type boudon tube (316SS)
Case and cover	Stainless steel (304SS) Crimp ring type
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	63 mm : ¼" PT, NPT and PF 80 mm : ¼", ⅜" PT, NPT and PF 100 mm : ¼", ⅜", ½" PT, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P253 Wise, P110 Wise

The post P255 Wise VietNam - Đồng hồ đo áp suất thấp Wise appeared first on thietbicongnghiepnang.com.

P256 Wise VietNam - Đồng hồ đo áp suất P256 Wise Việt Nam

thietbicongnghiepnang — 2019-02-20 15:36:57

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Euro gauge Safety pattern type overpressure protection pressure gauge_P256 series

P256 series

Service intended

P256 series are made with a solid plate wall and a blow-out back. Its stainless steel case and cover have a good appearance. It has the excellent proof against corrosion and chemical attack. Suitable for protection against damage to the measuring element when high overpressure is applied to the gauge instantaneously. Max overpressure is up to 4 times of measuring range.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of measuring range
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 4 MPa
Working pressure	Steady : 100 % of full scale Over range protection : 4 times the measuring range
Working temperature	Ambient : -40 ~ 65 ℃ -20 ~ 65 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 200 ℃ Max. 100 °C (With glycerin filling) Max. 100 ℃ (With silicone filling)
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale * NOTE : P256 series is not applied with diaphragm seal.

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS)
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Blowout protection	Solid front Blow-out back
Window	Laminated safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations overpressure range indicated by a black sector
Pointer	Black painted aluminium alloy
Process connection	½", ⅜" PT, NPT and PF
Option	Zero adjustable pointer Pressure connection and element : Monel Case and cover material : 316SS

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P256 Wise VietNam - Đồng hồ đo áp suất P256 Wise Việt Nam appeared first on thietbicongnghiepnang.com.

P257 Wise Vietnam - Đồng hồ đo áp suất có dầu Wise

thietbicongnghiepnang — 2019-02-20 14:44:22

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Euro gauge Safety pattern type pressure gauge_P257 series

Service intended

P257 series are made with a solid plate wall and a blow-out back. Its stainless steel case and cover have a good appearance. It has the excellent proof against corrosion and chemical attack.

Nominal diameter	63, 100 and 160 mm
Accuracy	P2572 (63 mm) : ±1.6 % of full scale P2574 (100 mm) and P2576 (160 mm) : ±0.5 % of full scale ±1.0 % of full scale
Scale range (MPa, kPa, bar)	63 mm : -0.1 ~ 0 to 0 ~ 100 MPa 100 and 160 mm : -0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 75 % of full scale (63 mm) 100 % of full scale (100 and 160 mm) Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 ℃ -20 ~ 65 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 200 ℃ Max. 100 °C (With glycerin filling) Max. 100 ℃ (With silicone filling)
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) 63 mm : <6 MPa : C type bourdon tube ≥6 MPa : Helical type bourdon tube 100 and 160 mm : <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Blowout protection	Solid front Blow-out back
Window	Laminated safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	63 mm : ⅛", ¼" PT, NPT and PF 100 and 160 mm : ¼", ½", ⅜" PT, NPT and PF
Certificates	ATEX Ex II GD c IIc TX Pressure equipment directive (2014/68/EU)-Annex III Module H
Option	Zero adjustable pointer (Only available with diameter 100 and 160 mm) Zero adjustment (External) : 100 and 160 mm Pressure connection and element : Monel (Only available with diameter 100 and 160 mm)

The post P257 Wise Vietnam - Đồng hồ đo áp suất có dầu Wise appeared first on thietbicongnghiepnang.com.

P258 Wise Vietnam - Đồng hồ đo áp suất nước P258 Wise

thietbicongnghiepnang — 2019-02-20 14:43:50

P258 Wise control là loại đồng hồ đo áp có dầu.

Công Ty Tăng Minh Phát - Đại lý Wise Control tại Việt Nam

Đồng hồ đo áp suất có dầu P258 Wise | Đồng hồ đo áp suất thấp Wise P258

Công dụng đồng hồ đo áp suất P258 Wise : đo áp suất thấp, đo áp suất nước, đo áp suất âm

P258 Wise là loại đồng hồ áp suất có dầu, thích hợp sử dụng trong môi trường có rung động mạnh, môi trường độc hại, ô nhiễm

Euro gauge Liquid filled industrial pressure gauge_P258 series

P258 Wise Vietnam are suitable for corrosive environments. Typical application includes : Chemical, petro-chemical, refining process, power generation, marine and food industry. The filled liquid absorbs vibration and pulsation.

Đồng hồ đo áp suất P258 Wise

Đường kính mặt : 63, 80, 100 and 160 mm

Độ chính xác : P2582 (63 mm) and P2583 (80 mm) : ±1.6 %
P2584 (100 mm) and P2586 (160 mm) : ±0.5 %

Vật liệu Vỏ : Inox 304, 316SS

Thang đo (MPa, kPa, bar) : 63 and 80 mm : 0.1 ~ 0 to 0 ~ 100 MPa
100 and 160 mm : 0.1 ~ 0 to 0 ~ 200 MPa

Kết nối : chân đứng, chân sau

Kiểu ren : 63 mm : ⅛", ¼" PT, NPT and PF
80 mm : ¼", ⅜" PT, NPT and PF
100 and 160 mm : ¼", ⅜", ½" PT, NPT and PF

* CÁCH CHỌN ĐỒNG HỒ ĐO ÁP P282 WISE

P258 : LIQUID FILLED INDUSTRIAL PRESSURE GAUGE

1. NOMINAL DIAMETER
2 : 63mm
3 : 80mm
4 : 100mm
6 : 160mm
2. MOUNTING TYPE (Refer to Mounting type & Dimension)
A : Bottom Connection, Direct
B : Bottom Connection, Surface, Case Mounting Plate
F : Center back Connection, Direct, Only available with diameter 63mm G: Lower back Connection, Direct
H: Center back Connection, Flush, Case Center Mounting Plate, Only available with diameter 63mm I : Center back Connection, Flush, Case Center Mounting Plate, with Bracket
Only available with diameter 63mm
J : Center back Connection, Flush, Cover Mounting Plate, Only available with diameter 63mm L : Lower back Connection, Flush, Case Center Mounting Plate
M: Lower back Connection, Flush, Case Center Mounting Bracket
N: Lower back Connection, Flush, Cover Mounting Plate, Not available with diameter 160mm
V : Center back Connection, Flush, Cover Mounting Bracket, Only available with diameter 63mm W: Lower back Connection, Flush, Cover Mounting Bracket
3. ACCURACY
3 : ±1.0% of Full Scale, Not available with diameter 63 & 80mm

4 : ±1.6% of Full Scale, Only available with diameter 63 & 80mm
4. CONNECTION
B : 1/8”, Only available with diameter 63mm C : 1/4”
D : 3/8”, Not available with diameter 63mm
E : 1/2”, Not available with diameter 63 & 80mm
5. CONNECTION TYPE
B: PF C: PT D: NPT
F : BSPT G: BSP
Z : Other
6.UNIT

H : Bar

A : Mpa

J : Kpa

Z : Other
7. RANGE
Refer to Pressure Unit and Range Table

8. PRESSURE CONNECTION MAT’L & DIALS
3   316SS and 2 colors
4   316L SS and 2 colors
7   316SS and 3 colors
8   316L SS and 3 colors
Z   Monel (Only available with diameter 100 and 160 mm)
9. OPTIONS
0   : None
1   : Accessories
SAMPLE MODEL NUMBER : P2582A4CCI044300

Thang đo đồng hồ đo áp P258 Wise - Wise control Việt Nam

Range and code	Unit and code			Nominal diameter
Range and code	H : bar	I : MPa	J : kPa	63 mm	80 mm	100 mm	160 mm
026	-1 ~ 0	-0.1 ~ 0	-100 ~ 0	O	O	O	O
123	0 ~ 0.4	0 ~ 0.04	0 ~ 40	X	X	O	Δ
040	0 ~ 0.5	0 ~ 0.05	0 ~ 50	X	X	O	Δ
041	0 ~ 1	0 ~ 0.1	0 ~ 100	O	O	O	O
133	0 ~ 1.6	0 ~ 0.16	0 ~ 160	X	X	O	O
042	0 ~ 2	0 ~ 0.2	0 ~ 200	O	O	O	O
134	0 ~ 2.5	0 ~ 0.25	0 ~ 250	X	X	O	O
043	0 ~ 3	0 ~ 0.3	0 ~ 300	O	O	O	O
044	0 ~ 4	0 ~ 0.4	0 ~ 400	O	O	O	O
045	0 ~ 6	0 ~ 0.6	0 ~ 600	O	O	O	O
047	0 ~ 10	0 ~ 1	0 ~ 1,000	O	O	O	O
050	0 ~ 15	0 ~ 1.5	X	O	O	O	O
143	0 ~ 16	0 ~ 1.6	X	O	O	O	O
051	0 ~ 20	0 ~ 2	X	O	O	O	O
052	0 ~ 25	0 ~ 2.5	X	O	O	O	O
054	0 ~ 35	0 ~ 3.5	X	O	O	O	O
151	0 ~ 40	0 ~ 4	X	O	O	O	O
055	0 ~ 50	0 ~ 5	X	O	O	O	O
056	0 ~ 60	0 ~ 6	X	O	O	O	O
057	0 ~ 70	0 ~ 7	X	O	O	O	O
058	0 ~ 100	0 ~ 10	X	O	O	O	O
059	0 ~ 150	0 ~ 15	X	O	O	O	O
060	0 ~ 160	0 ~ 16	X	O	O	O	O
062	0 ~ 250	0 ~ 25	X	O	O	O	O
064	0 ~ 350	0 ~ 35	X	O	O	O	O
065	0 ~ 400	0 ~ 40	X	O	O	O	O
066	0 ~ 500	0 ~ 50	X	O	O	O	O
067	0 ~ 600	0 ~ 60	X	O	O	O	O
068	0 ~ 700	0 ~ 70	X	O	O	O	O
070	0 ~ 1,000	0 ~ 100	X	O	O	O	O
074	0 ~ 1,600	0 ~ 160	X	X	X	O	O
075	0 ~ 2,000	0 ~ 200	X	X	X	O	O
006	-1 ~ 0.6	-0.1 ~ 0.06	-100 ~ 60	X	X	O	O
027	-1 ~ 1	-0.1 ~ 0.1	-100 ~ 100	O	O	O	O
007	-1 ~ 1.5	-0.1 ~ 0.15	-100 ~ 150	X	X	O	O
028	-1 ~ 2	-0.1 ~ 0.2	-100 ~ 200	O	O	O	O
029	-1 ~ 3	-0.1 ~ 0.3	-100 ~ 300	O	O	O	O
030	-1 ~ 4	-0.1 ~ 0.4	-100 ~ 400	O	O	O	O
010	-1 ~ 5	-0.1 ~ 0.5	-100 ~ 500	O	O	O	O
031	-1 ~ 6	-0.1 ~ 0.6	-100 ~ 600	O	O	O	O
014	-1 ~ 9	-0.1 ~ 0.9	-100 ~ 900	O	O	O	O
032	-1 ~ 10	-0.1 ~ 1	-100 ~ 1,000	O	O	O	O
033	-1 ~ 15	-0.1 ~ 1.5	-100 ~ 1.5 MPa	O	O	O	O
034	-1 ~ 20	-0.1 ~ 2	-100 ~ 2 MPa	O	O	O	O
017	-1 ~ 24	-0.1 ~ 2.4	-100 ~ 2.4 MPa	O	O	O	O
035	-1 ~ 25	-0.1 ~ 2.5	-100 ~ 2.5 MPa	O	O	O	O

Các thiết bị khác của Wise Control : P252 Wise, P255 Wise, P253 Wise, P110 Wise

The post P258 Wise Vietnam - Đồng hồ đo áp suất nước P258 Wise appeared first on thietbicongnghiepnang.com.

P259 Wise VietNam - Đồng hồ đo áp suất có dầu Wise Control

thietbicongnghiepnang — 2019-02-20 14:43:12

Đại lý Wise Control tại Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Euro gauge Liquid filled industrial pressure gauge (Internal brass)_P259 series

Service intended

P259 series are designed for long and reliable service under rugged conditions. P259 sereis are intended for adverse service conditions where pulsating or vibration exits, Hydraulic & compressors and are suitable for gaseous or liquid media that will not obstruct.

Nominal diameter	63, 100 and 160 mm
Accuracy	P2592 (63 mm) : ±1.6 % of full scale P2594 (100 mm) and P2596 (160 mm) : ±1.0 % of full scale
Scale range (MPa, kPa, bar)	63 mm : -0.1 ~ 0 to 0 ~ 40 MPa 100 and 160 mm : -0.1 ~ 0 to 0 ~ 100 MPa
Filling liquid	Glycerine
Working pressure	Steady : 75 % of full scale (63 mm) 100 % of full scale (100 and 160 mm) Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 60 °C (With glycerin filling) -40 ~ 60 °C (With silicone filling) Fluid : Max. 60 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Brass
Element	Brass Model : P2594 (100 mm) and P2596 (160 mm) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube with 316SS Model : P2592 (63 mm) <6 MPa : C type bourdon tube ≥6 MPa : Helical type bourdon tube
Blowout protection	Back, Rubber disc for 100 and 160 mm Top, Rubber disc for 63 mm
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Window	Laminated safety glass
Movement	63 mm : Brass 100 and 160 mm : Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	63 mm : ¼" PT, NPT and PF 100 and 160 mm : ⅜", ½" PT, NPT and PF
Option	Zero adjustable pointer (Only available with diameter 100 and 160 mm) Silicone filling

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post P259 Wise VietNam - Đồng hồ đo áp suất có dầu Wise Control appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P330, P335 Wise - Wise vietnam

thietbicongnghiepnang — 2019-02-20 14:42:20

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất âm Wise, Đồng hồ đo áp suất cao Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Process industry pressure gauge_P330,P335

Service intended

P330 and P335 series are designed for petroleum and chemical processing industries.

Nominal diameter	150 mm
Accuracy	±0.5 % of full scale (P335) ±1.0 % of full scale (P330)
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 75 % of full scale 100 % of full scale (P335) Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 200 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Black painted aluminium alloy
Cover	Black painted aluminium alloy
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Zero adjustment	Internal
Process connection	⅜", ½" PT, NPT and PF
Certificates	ATEX Ex II GD c IIc TX

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P330, P335 Wise - Wise vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P359 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 12:03:16

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Safety pattern type pressure gauge Solid-front and turret style thermoplastic case_P359 series

Service intended

P359 safety pattern pressure gauge comes with 4½" thermoplastic case for corrosive environment and heat resistance. Its solid front and blowout back case are designed to meet the safety requirements.

Nominal diameter	125 mm (4½")
Accuracy	±0.5 % of full scale ±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 75 % of full scale 100 % of full scale Over range protection : 130% of full scale
Working temperature	Ambient : -40 ~ 65 ℃ -20 ~ 65 ℃ (With glycerin filling) -40 ~ 65 ℃ (With silicone filling) Fluid : Max. 200 ℃ Max. 100 °C (With glycerin filling) Max. 100 ℃ (With silicone filling)
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless Steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Black glass reinforced thermoplastic (PBTB) Solid front, Blow-out back Turret style case with built in rear flange lugs
Window	Polycarbonate
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Zero adjustment	Internal
Process connection	⅜", ½" PF, NPT and PF
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H ATEX Ex II GD c IIB TX
Option	Zero adjustment : External Window : Safety glass Pressure connection and element : Monel

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P359 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P410, P420 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 12:02:19

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Wise.

Draft gauge_P410, P420 series

Service intended

P410 and P420 series are designed to measure low, vacuum or compound pressure. These series are available in panel mounting.

Nominal diameter	192 (W) x 96 mm (H) (P type) 96 (W) x 192 mm (H) (R type)
Accuracy	±2.0 or ±3.0 % of full scale
Scale range (MPa, kPa, bar)	Vacuum : -1 ~ 0 to -0.5 ~ 0 kPa Compound : -0.2 ~ 0.2 to -5 ~ 5 kPa Pressure : 0 ~ 0.5 to 0 ~ 10 kPa
Working pressure	Steady : 75 % of full scale Over range protection : 130% of full scale
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±1.0 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316L SS)
Case	Black finished steel : P410 Black finished stainless steel (304SS) : P420
Window	Safety glass
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted PBs2 alloy
Process connection	⅜", ½" PF, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P410, P420 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất thấp P422 Wise - Wise Việt Nam

thietbicongnghiepnang — 2019-02-20 11:56:59

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất Wise control.

Low pressure gauge (Capsule system)_P422 series

Service intended

P422 series are designed to measure low, vacuum or compound pressure. These models have a 316L SS measuring element which consists of two formed diaphragms and diaphragms are welded together.

Nominal diameter	63, 80, 100 and 160 mm
Accuracy	±1.0 % of full scale ±1.6 % of full scale
Scale range (kPa, mbar)	-35 ~ 0 to -2 ~ 0 kPa -15 ~ 15 to -0.5 ~ 0.5 kPa 0 ~1 to 0 ~ 2 kPa
Working pressure	Steady : 75 % of full scale Over range protection : 130% of full scale
Working temperature	Ambient : -20 ~ 65 °C -40 ~ 65 °C (With silicone filling) Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.6 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316L SS) Capsule system : Up to 35 kPa
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS)
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	¼", ⅜", ½" PT, NPT and PF
Certificates	ATEX Ex II GD c IIc TX
Option	Silicone filling

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất thấp P422 Wise - Wise Việt Nam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P336 Wise - Wise Việt Nam

thietbicongnghiepnang — 2019-02-20 14:42:23

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất âm Wise, Đồng hồ đo áp suất cao Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất hàn quốc.

Duplex pressure gauge_P336,P338

Service intended

P336 and P338 series offer dual air brake system, differential pressure indication and it can be used for any other application where two independent pressures are indicated on a single dial.

Nominal diameter	100 mm (P336) 110 mm (W) x 110 mm (H) (P338)
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	0 ~ 0.4 to 0 ~ 3.5 MPa (P336) 0 ~ 1 and 0 ~ 1.2 MPa (P338)
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 200 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS)
Case	Black painted aluminium
Cover	Black painted aluminium (P336) ABS resin (P338)
Window	Safety glass (P336) Polycarbonate (P338)
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	⅜" PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P336 Wise - Wise Việt Nam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất âm P423 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 10:25:17

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Wise.

Ultra Low pressure gauge_P423 series

P423 series are designed to measure ultra low, vacuum or compound pressure.
These models have a stainless steel measuring element
which consists of two formed diaphragms and diaphragms
are welded together.

Nominal diameter	100 mm
Accuracy	· ±1.6% of full scale
Scale range (kPa, mbar)	· -1 ~ 0 to -0.2 ~ 0 kPa · -0.1 ~ 0.1 to -0.5 ~ 0.5 kPa · 0 ~ 0.2 to 0 ~ 1 kPa
Working pressure	· Steady pressure : 75% of full scale · Over range protection : 130% of full scale
Working temperature	· Ambient : -20 ~ 65 °C · Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.6 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	· Stainless steel (316L SS) · Pressure Chamber : Up to 1 kPa
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS)
Window	Safety glass
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	¼", ⅜", ½" PT, NPT and PF
Option	Internal zero adjustment

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất âm P423 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất thấp P430 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 09:53:53

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất chân không Wise, Đồng hồ đo áp suất âm Wise.

Low pressure gauge with aluminium case_P430 series

Service intended

P430 series are designed to measure low, vacuum or compound pressure. These models have a stainless steel 316L measuring element which consists of two formed diaphragms and diaphragms are welded together.

Nominal diameter	100 and 150 mm
Accuracy	±1.0 % of full scale ±1.5 % of full scale
Scale range (kPa, mbar)	-35 ~ 0 to -1 ~ 0 kPa -15 ~ 15 to -0.5 ~ 0.5 kPa 0 ~1 to 0 ~ 35 kPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316L SS) Pressure camber : Up to 35 kPa
Case	Black finished aluminium
Cover	Black finished aluminium
Window	Safety glass
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	⅜", ½" PT, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất thấp P430 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp có màng P428, P429 Wise

thietbicongnghiepnang — 2019-02-20 10:21:30

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất chân không Wise, Đồng hồ đo áp suất âm Wise.

Diaphragm type low pressure gauge_P428,P429

Service intended

P428 and P429 series are consisted of diaphragms which are designed to protect device and designed to isolate pressure gauge from corrosive, contaminative and viscous pressure media.

Nominal diameter	100 and 150 mm
Accuracy	±1.5 % of full scale
Scale range (kPa, mbar)	-1 ~ 0 to -35 ~ 0 kPa 0.5 to ±15 kPa 0 ~1 to 0 ~ 35 kPa
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.8 % per 10 ℃ of full scale

Standard features

Process connection	Model P428 : PT and NPT, others feasible Model P429 : Flanges to ANSI, JIS or other standard
Upper flange (Gauge side)	Stainless steel (304SS, 316SS)
Under flange (Process side)	Stainless Steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C
Diaphragm	316L SS
Certificates	ATEX Ex II GD c IIc TX
Option	Diaphragm : PTFE lining Under flange : PTFE lining PTFE coating

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp có màng P428, P429 Wise appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất thấp P440 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 09:51:37

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất chân không Wise, Đồng hồ đo áp suất âm Wise.

Low pressure gauge with nickel plated steel case_P440 series

Service intended

P440 series are designed to measure low, vacuum or compound pressure. These models have beryllium copper element and nickel plated steel case.

Nominal diameter	63, 75 and 100 mm
Accuracy	±1.5 % of full scale
Scale range (kPa, mbar)	-50 ~ 0 to -5 ~ 0 kPa -15 ~ 15 to -2.5 ~ 2.5 kPa 0 ~ 5 to 0 ~ 50 kPa
Working pressure	Steady : 75 % of full scale Over range protection : 130% of full scale
Working temperature	Ambient : -20 ~ 60 °C Fluid : Max. 60 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.6 % per 10 ℃ of full scale

Standard features

Pressure connection	Nickel plated brass 316SS, only available with 63 mm "F" type
Element	Beryllium copper
Case	Nickel plated steel Stainless steel (304SS), only available with 63 mm "F" and "J" type
Cover	Nickel plated steel Stainless steel (304SS), only available with 63 mm "F" and "J" type
Window	Glass Polycarbonate
Movement	Brass
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Process connection	63 mm : ⅛", ¼" PT, NPT and PF 75 mm : ¼", ⅜" PT, NPT and PF 100 mm : ⅜", ½" PT, NPT and PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất thấp P440 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P500 Wise - Wise VietNam

thietbicongnghiepnang — 2019-02-20 10:07:43

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất chân không Wise, Đồng hồ đo áp suất âm Wise.

Euro gauge Inductive contact type pressure gauge_P500 series

P500 series are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the setpoints.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of full scale for pressure indication
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 100 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C -40 ~ 65 °C (With silicone filling) Fluid : Max. 200 °C Max. 100 °C (With silicone filling)
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Bezel ring	Stainless steel (304SS) Bayonet type
Window	Safety glass : Only available with diameter 100 mm Polycarbonate : 100 and 160 mm
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Conduit connection	M20 x 1.5
Process connection	⅜", ½" PT, NPT and PF
Certificates	KCS Ex ia IIC T6 NEPSI Ex ia IIC T6 Ga Tamb = -25 ~ 56 ºC
Option	Damping movement

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P500 Wise - Wise VietNam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất có màng P501, P502 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 09:43:56

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp hàn quốc.

Euro gauge Inductive contact type diaphragm pressure gauge_P501, P502 series

Service intended

P501 and P502 seriese are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contact to be used. The contact block is mounted on the dial. The windows is fitted with a knob for external adjustment of the setpoints.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	0 ~ 1 kPa to 0 ~ 40 kPa (Flange 150 mm) 0 ~ 50 kPa to 0 ~ 2.5 MPa (Flange 100 mm)
Working pressure	Steady : Full scale value Fluctuating : 90 % of full scale value
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection and under flange	Material : 304SS, 316SS and 316L SS
Upper flange (Gauge side)	Material : 304SS, 316SS
Diaphragm material	≤40 kPa Stainless steel (316Ti SS) >40 kPa Duratherm 600
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Window	Safety glass : Only available with diameter 100 mm Polycarbonate : 100 and 160 mm
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Conduit connection	M20 x 1.5
Certificates	NEPSI Ex ia IIC T6 Ga Tamb = -25 ~ 56 ºC
Option	External zero adjustable

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất có màng P501, P502 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất có dầu P510 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 09:45:00

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Wise control.

Euro gauge Electrical contact type pressure gauge (Modular system)_P510 series

Service intended

P510 series are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the setpoints.

Nominal diameter	100 and 160 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 100 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Bezel ring	Stainless steel (304SS) Bayonet type
Window	Polycarbonate
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Conduit connection	M20 x 1.5
Process connection	⅜", ½" PT, NPT and PF
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H
Option	Damping movement

The post Đồng hồ đo áp suất có dầu P510 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất cao P535, P536 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-20 08:52:52

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất Hàn quốc

Indicating type pressure switch_P535, P536 series

Đường kính mặt : 100 and 150 mm

Độ chính xác : ±1.5 %

Vật liệu Vỏ : 316SS

Thang đo (MPa, kPa, bar) : -0.1 ~ 0 to -0.1 ~ 2 MPa
0 ~ 0.1 to 0 ~ 35 MPa

Kết nối : chân đứng, chân sau

Kiểu ren : ⅜", ½" PT, NPT and PF

BASE MODEL

P535 : INDICATING PRESSURE SWITCH (SINGLE SET POINT)

Đồng hồ đo áp suất P535 Wise

P536 : INDICATING PRESSURE SWITCH (DUAL SET POINT)

Đồng hồ đo áp suất P536 Wise

1. NOMINAL DIAMETER
6 : 150mm
2. MOUNTING
B : Bottom Connection, Surface, Case Mounting Plate

3. UNUSED CHARACTER
4

4. PROCESS CONNECTION

D : 3/8”
E : 1/2”

5. CONNECTION TYPE
B : PF

C : PT

D : NPT

6. MEASURING UNIT

B : kgf/cm2 (Pressure) or cmHg + kgf/cm2 (Compound)

C : cmHg, Only available with Vacuum gauge
7. RANGE
Refer to Scale Range Table Below
8. DIAL COLOR
3 : 2 Colors
7 : 3 Colors, Available with Compound and Vacuum gauges

9. OPTIONS
0 : None
1 : Accessories
Thang đo P535, P536 Wise Control Việt Nam

Range and code			Unit and code				P535	P536

	H : bar		I : MPa		J : kPa
	H : bar		I : MPa		J : kPa
026	-1 ~ 0		-0.1 ~ 0		-100	~ 0	O	O
041	0	~ 1	0	~ 0.1	0	~ 100	O	O
042	0	~ 2	0	~ 0.2	0	~ 200	O	O
043	0	~ 3	0	~ 0.3	0	~ 300	O	O
044	0	~ 4	0	~ 0.4	0	~ 400	O	O
045	0	~ 6	0	~ 0.6	0	~ 600	O	O
047	0	~ 10	0	~ 1	0	~ 1,000	O	O
050	0	~ 15	0	~ 1.5		X	O	O
143	0	~ 16	0	~ 1.6		X	O	O
051	0	~ 20	0	~ 2		X	O	O
052	0	~ 25	0	~ 2.5		X	O	O
054	0	~ 35	0	~ 3.5		X	O	O
151	0	~ 40	0	~ 4		X	O	O
055	0	~ 50	0	~ 5		X	O	O
056	0	~ 60	0	~ 6		X	O	O
057	0	~ 70	0	~ 7		X	O	O
058	0	~ 100	0	~ 10		X	O	O
059	0	~ 150	0	~ 15		X	O	O
060	0	~ 160	0	~ 16		X	O	O
062	0	~ 250	0	~ 25		X	O	O
064	0	~ 350	0	~ 35		X	O	O
065	0	~ 400	0	~ 40		X	O	O
027	-1 ~ 1		-0.1 ~ 0.1		-100	~ 100	O	O
028	-1 ~ 2		-0.1 ~ 0.2		-100	~ 200	O	O
029	-1 ~ 3		-0.1 ~ 0.3		-100	~ 300	O	O
030	-1 ~ 4		-0.1 ~ 0.4		-100	~ 400	O	O
031	-1 ~ 6		-0.1 ~ 0.6		-100	~ 600	O	O
032	-1 ~ 10		-0.1 ~ 1		-100	~ 1,000	O	O
033	-1 ~ 15		-0.1 ~ 1.5		-100	~ 1.5 MPa	O	O
034	-1 ~ 20		-0.1 ~2		-100	~2 MPa	O	O
035	-1 ~ 25		-0.1 ~ 2.5		-100	~ 2.5 MPa	O	O
							O : Available	X : Not available

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất cao P535, P536 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất có tiếp điểm điện PP542, P543 Wise - Wise VietNam

thietbicongnghiepnang — 2019-02-20 08:57:13

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất Hàn quốc

Electrical contact type pressure gauge with nickel plated zinc case_P542, P543 series

Service intended

P542 and P543 series are designed for a local reading of measured pressure and equipped with the electrical contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the set points. These are also designed to direct the leakage of insulating oil inside the electric cable.

Nominal diameter	100 and 150 mm
Accuracy	±1.0 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0.6 MPa to -0.1 ~ 1 MPa -0.1 ~ 0.3 MPa
Working pressure	Steady : 75 % of full scale value Over range protection : 130% of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS) Threaded entry, radial
Element	Stainless steel (316SS) C type bourdon tube
Case	Nickel plated zinc for 100 mm (P542) Triple setpoint only 316SS 100 and 150 mm (P543)
Cover	Nickel plated zinc for 100 mm Triple setpoint only 316SS 150 mm (P543)
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	BsT3 alloy, black painted pointer with gold plated
Contact	Contact : Dual set point or triple set point Contact rating : AC 110 V, 0.5 A/AC 220 V, 0.25 A Dielectric strength : AC 2,000 V/min insulation Insulation resistance : More than 100 MΩ at DC 500 V
Process connection	⅜" PF

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất có tiếp điểm điện PP542, P543 Wise - Wise VietNam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất có tiếp điểm điện P520 Wise - Wise VietNam

thietbicongnghiepnang — 2019-02-20 08:37:54

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Đồng hồ đo áp suất Wise P520 | P520 Wise Việt Nam

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Wise Việt Nam.

Euro gauge Electrical contact type pressure gauge_P520 series

Service intended

P520 series are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the setpoints.

Nominal diameter	100 mm
Accuracy	±1.0% of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to 0 ~ 200 MPa
Working pressure	Steady : 100 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 200 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10 MPa : C type bourdon tube ≥10 MPa : Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Window	Safety glass
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	Black painted aluminium alloy
Conduit connection	M20 x 1.5
Process connection	⅜", ½" PT, NPT and PF
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H
Option	Damping movement

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất có tiếp điểm điện P520 Wise - Wise VietNam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất có tiếp điểm điện P531 Wise - Wise VietNam

thietbicongnghiepnang — 2019-02-20 08:40:26

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp, Đồng hồ đo áp suất Hàn quốc

Electrical contact pressure gauge with aluminium case_P531, P532, P533, P534, P537, P539 series

Service intended

P530 series are designed for a local reading of measured pressure and equipped with the inductive contact block which allows all the combinations of contacts to be used. The contact block is mounted on the dial. The window is fitted with a knob for external adjustment of the setpoints.

Nominal diameter	100 and 150 mm
Accuracy	±1.5 % of full scale
Scale range (MPa, kPa, bar)	-0.1 ~ 0 to -0.1 ~ 2 MPa 0 ~ 0.1 to 0 ~ 100 MPa
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -40 ~ 65 °C Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	C type bourdon tube Stainless steel (316SS)
Case	Black finished aluminium
Cover	Black finished aluminium Screwed
Window	Acrylic resin Safety glass (P539)
Movement	Stainless steel
Dial	White aluminium with black graduations
Pointer	BsT3 alloy, black painted pointer with golden plated
Contacts	Contact rating : AC 110 V, 0.5 A/AC 220 V 0.25 A DC 110 V, 0.3 A/DC 220 V 0.15 A Dielectric strength : AC 1,000 V/min Insulation resistance : More than 100 MΩ at DC 500 V
Process connection	⅜", ½" PT, NPT and PF
Certificates	Pressure equipment directive (2014/68/EU) Annex III Module H

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất có tiếp điểm điện P531 Wise - Wise VietNam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P580 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 22:38:26

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp.

Density monitoring system_P580 series

Service intended

P580 series are designed to monitor the gas density of closed SF6 tank (for switchgear). It is capable of the measuring real time status of SF6 gas density. These series are equipped with the relay contact which has the three configurable independent units to sense and measure the instantaneous pressure rise.

Display	Analog indicator, operation and alarm status LED
Accuracy	±1.0 % at ambient temperature +20 °C (Indicator) ±2.5 % at ambient temperature -20 °C / +60 °C (Indicator) ±0.25 % at ambient temperature 0 °C ~ +50 °C (Current output)
Scale range	-0.1 ~ 0.1 MPa to -0.1 ~ 1.2 MPa
Working temperature	Ambient : -20 ~ 65 °C (Gas phase) Storage : -50 ~ 60 °C maximum
System configuration	HART communication
Degree of protection	EN60529/IEC529/IP67

Standard features

Mechanical

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) C-type bourdon tube
Case and cover	Stainless steel (304SS) Bayonet type
Window	Safety glass
Movement	Stainless steel (304SS) Bimetal link (Temperature compensation)
Pointer	Black painted aluminium alloy
Process connection	G½"
Helium leak rate	Tested to confirm leakage rates of less than 10-8 mbar.L/sec

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P580 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P590 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 22:39:50

Đại lý Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp hàn quốc

SF6 gas density monitor_P590 series

Service intended

P590 series monitor are designed to monitor the gas density of closed SF6 tank for switchgear.

Nominal diameter	100 mm
Accuracy	±1.0 % at ambient temperature +20 °C ±2.5 % at ambient temperature -20 °C ... +60 °C and calibration pressure as reference isochore
Scale range (MPa, bar)	-0.1 ~ 0.1 MPa to -0.1 ~ 2 MPa at SF6 gas pressure +20 °C
Permissible temperature	Ambient : -20 ~ 65 °C (Gas phase) Storage : -50 ~ 60 °C maximum
High voltage test	2 kV, 50 Hz / wiring versus case
Degree of protection	EN60529/IEC529/IP67
Electrical connection	Cable box with cable gland : M20 x 1.5 Conductor cross - section : Max. 1.5 mm²

Standard features

Pressure connection	Stainless steel (316SS)
Element	Stainless steel (316SS) <10MPa C type bourdon tube ≥10MPa Helical type bourdon tube
Case	Stainless steel (304SS)
Cover	Stainless steel (304SS) Bayonet type
Window	Safety glass
Movement	Stainless steel (304SS) Bimetal link (For environment temperature compensation)
Dial	White aluminium with red, yellow and green graduations
Pointer	Black painted aluminium alloy
Process connection	G½"
Helium leak rate	Tested to confirm leakage rates of less than 10-8 mbar-L/sec

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P590 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P710, P720, P730 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 22:19:02

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Hàn Quốc.

Service intended

Design	Internal diaphragm
Accuracy	Refer to gauge model
Suitable pressure range (MPa, kPa, bar)	-0.1 ~ 0 to -0.1 ~ 2.5 MPa 0 ~ 0.1 to 0 ~ 35 MPa
Filling liquid	Silicone oil
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Diaphragm material	Diaphragms are available in many corrosion resistant materials. Compatibility of selected material and process fluid is the responsibility of user.
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Process connection	Model P710 : PT, NPT and others feasible Model P720, P730 : Flanges to ANSI, JIS or other standard
Upper flange (Gauge side)	Stainless steel (304SS, 316SS, Titanium)
Diaphragm	316L SS, Monel, Hastelloy-C Titanium, Tantalum, Nickel, Alloy20
Under flange (Process side)	Stainless steel (304SS, 304L SS, 316SS, 316L SS) Monel, Hastelloy-C, Titanium, Nickel
Certificates	ATEX Ex II GD c IIC TX
Option	■ Diaphragm and under flange are available in PTFE coating or PTFE lining (★See note) ■ Under flange (Process side) are available in purging plug or heating/cooling jacket

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P710, P720, P730 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P740 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 22:18:51

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp Hàn Quốc.

High temperature service pressure gauge_P740 series

Service intended

P740 series have diaphragm seal to be combined with a pressure gauge, and measure the melted plastics, fiber, and synthetic under high pressure. It is suitable to be used for the situation where corrosive, contaminated, hot and viscous pressure mediums are present during the chemical or food process.

Pressure range (MPa, bar)	Refer to range table Depending on diaphragm size and process conditions
Accuracy	±1.0 % of full scale
Filling liquid	Silicone oil
Working temperature	Ambient : -20 ~ 65 ℃ Fluid : Max. 300 ℃
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Process connection	¾" PF and 1" PF male screw
Body	Stainless steel (316SS)
Diaphragm	Stainless steel (316L SS)
Pocket	80, 150 and 300 mm
Certificates	ATEX Ex II GD c IIC TX

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P740 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất P757 Wise - Wise Vietnam

thietbicongnghiepnang — 2019-02-19 16:54:23

Đại lý Wise Control Việt Nam - Wise VietNam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp.

Flush diaphragm type pressure gauge_P757 series

Service intended

P757 series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present such as a chemical and food process.

Nominal diameter	63, 80 and 100 mm
Accuracy	63 and 80 mm : ±1.6 % of full scale 100 mm : ±1.0 % of full scale
Scale range (MPa, kPa, bar)	Refer to pressure unit and range table Depending on diaphragm size and process conditions
Working pressure	Steady : 75 % of full scale Over range protection : 130 % of full scale
Working temperature	Ambient : -20 ~ 65 °C Fluid : Max. 100 °C
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Body	Stainless steel (316SS)
Process connection	Stainless steel (316SS) Screw connection
Diaphragm	Stainless steel (316L SS)
Certificates	ATEX Ex II GD c IIC TX

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất P757 Wise - Wise Vietnam appeared first on thietbicongnghiepnang.com.

Đồng hồ đo áp suất nước P960 Wise - Wise VietNam

thietbicongnghiepnang — 2019-02-19 16:41:43

Đại lý cung cấp đồng hồ đo áp suất Wise Control Việt Nam

Datasheet

Đồng hồ đo áp suất nước Wise, Đồng hồ đo áp suất thấp Wise, Đồng hồ đo áp suất có dầu Wise, Đồng hồ đo áp suất tiếp điểm điện Wise, Đồng hồ đo áp suất Hàn Quốc

Manometer_P960 series

Service intended

P960 series manometer is a pressure measuring instrument, and it measures the for calibration of all pressure instruments. It is suitable for measuring low and vacuum pressure.

Scale range

U type : 0 ~ ±100 to 0 ~ ±600 mm
Inclined type : 0 ~ 30, 60 and 150 mm
Wall type : 0 ~ 500, 1,000 and 1,500 mm

Các thiết bị khác của Wise Control : P252 Wise, P258 Wise, P255 Wise, P253 Wise, P110 Wise

The post Đồng hồ đo áp suất nước P960 Wise - Wise VietNam appeared first on thietbicongnghiepnang.com.

Tăng Minh Phát

Đồng hồ đo áp suất tiếp điểm điện T5500E Ashcroft

P731,P721,P711 Wise | Đồng hồ áp suất Wise

Đồng hồ áp suất Wise control tại Việt Nam

Diaphragm seal type pressure gauge_P710,P720,P730

P710 Series - Screwed process connection P720 Series - "I" type process connection P730 Series - Flat type flange process connection

Đồng hồ đo nhiệt độ T990 Wise

Explosion proof type indicating temperature switch_T990

T990 Wise control

Đồng hồ đo nhiệt độ T953 Wise

Đồng hồ đo nhiệt độ T941, T942 Wise

Weatherproof temperature switch_T941, T942

T941, T942

Đồng hồ đo nhiệt độ T931 Wise

Indicating temperature switch_T931 (Case compensation system SAMA class ⅢB) T932 (Full compensation system SAMA class ⅢA)

T931 (Case compensation system SAMA class ⅢB) T932 (Full compensation system SAMA class ⅢA)

Đồng hồ đo nhiệt độ T930 Wise

Temperature recorder (Case compensation system)_T930

T930

Đồng hồ đo nhiệt độ T761 Wise

Remote reading thermometer with electrical contact_T761(H), T762(H/L), T763(L), T764(H/HH)

T761(H), T762(H/L), T763(L), T764(H/HH)

Đồng hồ đo nhiệt độ T751 Wise

Bimetal thermometer with electrical contact_T751(H), T752(H/L), T753(L), T754(H/HH)

T751(H), T752(H/L), T753(L), T754(H/HH)

Đồng hồ đo nhiệt độ T721 Wise

Direct reading aluminium case thermometer with electrical contact_T721(H), T722(H/L), T723(L), T724(H/HH)

T721(H), T722(H/L), T723(L), T724(H/HH)

Đồng hồ đo nhiệt độ T711 Wise

Thiết bị đo nhiệt độ Wise | Wise Việt Nam

Remote reading aluminium case thermometer with electrical contact_T711(H), T712(H/L), T713(L), T714(H/HH)

T711(H), T712(H/L), T713(L), T714(H/HH)

Đồng hồ đo nhiệt độ T521 Wise

Đồng hồ đo nhiệt độ T501 Wise

Euro gauge Inductive contact type temperature gauge_T501(H), T502(H/L), T503(L), T504(H/HH), T505(L/LL)

T501(H), T502(H/L), T503(L), T504(H/HH), T505(L/LL)

Đồng hồ đo nhiệt độ T400 Wise

Glass thermometer_T400

T400 Wise

Đồng hồ đo nhiệt độ T360 Wise

Safety pattern type remote reading thermometer solid-front turret style thermoplastic case_T360

Đồng hồ đo nhiệt độ T359 Wise

Safety pattern type direct reading thermometer solid-front turret style thermoplastic case_T359

Đồng hồ đo nhiệt độ T290 Wise

Direct reading thermometer with adjustable stem_T290

Đồng hồ đo nhiệt độ T259 Wise

Đồng hồ đo nhiệt độ Wise

Euro gauge Liquid filled direct reading thermometer_T259

Đồng hồ đo nhiệt độ T250 Wise

Euro gauge Direct reading thermometer_T250

Đồng hồ đo nhiệt độ T222 Wise

Direct reading thermometer with aluminium case_T222

Đồng hồ đo nhiệt độ T120 Wise

Process industry bimetal thermometer_T120

Đồng hồ đo nhiệt độ T219 Wise

Liquid filled remote reading thermometer_T219

Đồng hồ đo nhiệt độ T213 Wise

Remote reading thermometer with external mounting bracket on pipes and tanks_T213

Đồng hồ đo nhiệt độ T212 Wise

Remote reading thermometer with aluminium case_T212

T191 Wise | Đồng hồ đo nhiệt độ Wise

Hermetically sealed case bimetal thermometer with adjustable stem_T191

T150 Wise | Đồng hồ đo nhiệt độ nước Wise

Euro gauge Bimetal thermometer_T150

T120 Wise | Đồng hồ đo nhiệt độ Wise

T114 Wise | Đồng hồ đo nhiệt độ Wise

General service bimetal thermometer_T114

T112 Wise | Đồng hồ đo nhiệt độ Wise

Hermetically sealed case bimetal thermometer_T112

T111 Wise | Đồng hồ đo nhiệt độ hơi Wise

Industrial bimetal thermometer_T111

R211, R212 Wise | Đầu dò nhiệt độ Wise

Metallic protection tube resistance temperature detector_R210 series

R210 series

R201, R202 Wise | Đầu dò củ hành Wise

R120, R121, R122 Wise | Đầu dò nhiệt độ Wise

Sheathed thermocouple_R120 sereis (R series)

R120 sereis (R series)

R971, R972 Wise | Đầu dò nhiệt độ Pt100 Wise

Đầu dò nhiệt độ Pt100 Wise