Tăng Minh Phát

Máy thử kéo uốn dây Mark-10, Thiết bị đo lực căn dây Mark 10

thietbicongnghiepnang — 2022-04-28 14:12:01

Nhà phân phối thiết bị đo Mark 10 chính hãng tại Việt Nam

Tăng minh phát đại lý Mark-10

Máy thử kéo uốn dây Mark-10

Máy thử kéo uốn dây Mark-10 đo lực kéo ra của các đầu nối được uốn, lên đến 200 lbF (1 kN) đối với diamaters dây lên đến 0,25 "(6,4 mm). WT3-201 / WT3-201M / R06

Model: WT3-201

Quick-action lever operation
200 lbF (1 kN) capacity
USB, RS-232, Mitutoyo, analog, set point outputs
1,000-point data memory and statistics
Auto output / data storage / zero upon sample break
$2,395

Mode: WT3-201M

Motorized, automated operation
200 lbF (1 kN) capacity
Configurable test speed
Auto-start and reverse at break
2,000-point data memory with time stamp and statistics
Auto output / data storage / zero / reverse upon sample break
From $4,450

Series: R06

Portable, hand-operated ratcheting mechanism
200 lbF (1 kN) capacity
Ideal for field testing and audits
Requires a Mark-10 indicator
$1,600

The post Máy thử kéo uốn dây Mark-10, Thiết bị đo lực căn dây Mark 10 appeared first on thietbicongnghiepnang.com.

Ngàm kẹp Mark 10

thietbicongnghiepnang — 2019-10-09 15:41:02

Nhà phân phối thiết bị đo Mark 10 chính hãng tại Việt Nam

Tăng Minh Phát - Chuyên cung cấp dụng cụ đo của hãng Mark 10 tại Việt Nam

MARK 10 VIETNAM

Mark 10 chuyên cung cấp máy đo lực kéo, nén, lực căng dùng trong công nghiệp.

1. Ngàm kẹp dùng để kéo ( Tensile/Pull)

	Wedge Grips G1061, G1061-1, G1061-2, G1061-3 General tensile testing Self-tightening jaws Max. sample thickness: 0.25 in (6.4 mm) Max. sample width: 0.375 in (9.5 mm) / 0.75 in (19.1 mm), 1.00 in (25.4 mm) 50 - 2,000 lbF (0.25 - 9 kN) capacities
	Miniature Wedge Grip G1062 General tensile testing of thin / narrow materials Self-tightening jaws Max. sample thickness: 0.09 in (2.3 mm) 100 lbF (500 N) capacity
	Miniature Component Grip G1003 For a variety of small component pull tests Max. sample thickness: 0.07 in (1.8 mm) 30 lbF (150 N) capacity
	Multi-jaw Grip G1056 Pull testing of round and odd shaped items Sample size range: Ø0.40 - 1.25 in (10.2- 31.7 mm) 100 lbF (500 N) capacity
	Clevis Grip G1077 Secures a spring, chain, or other sample during tensile testing 500 lbF (2.5 kN) capacity
	High Capacity Clevis Grip G1090 Secures a spring, chain, or other sample during tensile testing Eye end mounting 2,000 lbF (9 kN) capacity

2. Ngàm kẹp dùng để nén - đẩy - uốn (Compression / Push / Bend)

2. Package/Peel/Friction

3. Vise / Parallel

4. Wire / Rope / Yarn / Turbing

5. Torque / Force

	Wedge Grips G1061, G1061-1, G1061-2, G1061-3 General tensile testing Self-tightening jaws Max. sample thickness: 0.25 in (6.4 mm) Max. sample width: 0.375 in (9.5 mm) / 0.75 in (19.1 mm), 1.00 in (25.4 mm) 50 - 2,000 lbF (0.25 - 9 kN) capacities
	Miniature Component Grip G1003 For a variety of small component pull tests Max. sample thickness: 0.07 in (1.8 mm) 30 lbF (150 N) capacity
	Film & Paper Grips G1008, G1015-1, G1015-2, G1015-3 Tensile testing of film, paper, and other thin materials Conforms to ASTM F88, D1876 Max. sample width: 1.25 in (31.8 mm) / 3.00 in (76.2) / 5.00 in (127.0 mm) / 7.00 in (177.8 mm) 100 lbF (500 N) capacity

The post Ngàm kẹp Mark 10 appeared first on thietbicongnghiepnang.com.

Máy đo lực ESM750S Mark-10

thietbicongnghiepnang — 2019-10-09 09:06:30

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750S Mark 10

Force measurement to 750 lbF (3.4 kN)
14.2" of travel
PC control available
Stop / cycle at force, travel, or limit switch
Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM750S Mark-10 appeared first on thietbicongnghiepnang.com.

Máy đo lực ESM750 Mark-10

thietbicongnghiepnang — 2019-10-09 09:06:16

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM750 Mark 10

Force measurement to 750 lbF (3.4 kN)
32" of travel
PC control available
Stop / cycle at force, travel, or limit switch
Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM750 Mark-10 appeared first on thietbicongnghiepnang.com.

Máy đo lực ESM303 Mark-10

thietbicongnghiepnang — 2019-10-09 09:05:57

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM303 Mark 10

Force measurement to 300 lbF (1.5 kN)
Vertical orientation
18" of travel
PC control available
Stop / cycle at force, travel, or limit switch
Overload protection

1. ĐẶC ĐIỂM MÁY ĐO LỰC ESM303

Selectable speed setting
Upper and lower travel limit switches
Adjustable, removal controller with intuitive menu navigation
Password protection of test parameters
Stepper motor-driven, producing smooth and quiet operation with no speed variation under load
USB output of force vs. time or force vs. travel
Compact footprint, suitable for crowded workbenches
Ergonomic design, with smart, clean cable management
Integrated electronics assembly, easily removed and transported
Adjustable mounting plate with T-slot base

2. Thông số kĩ thuật ESM303

Load capacity: < 24 in [610 mm]/min: > 24 in [610 mm]/min:	300 lbF [1.5 kN] 200 lbF [1 kN]
Speed range: Standard: Optional:	0.5 - 13 in/min [13 - 330 mm/min] 0.02 - 45 in/min [0.5 - 1,100 mm/min]
Maximum travel:	18.0 in [457 mm]
Speed setting accuracy:	±0.2%
Speed variation with load:	±0% [Stepper motor driven]
Travel accuracy:	±0.002 in per 10 in [±0.05 mm per 250 mm]
Travel resolution:	0.001 in [0.02 mm]
Travel display position retention:	Most recent position is recalled upon powering on
Limit switch repeatability:	±0.001 in [0.03 mm]
Power:	Universal input 80-240 VAC, 50/60 Hz, 60W
Weight:	56.5 lb [25.6 kg]

3. CÁC CHỨC NĂNG CỦA ESM303

Function	Part No.	Description	Requirements
FollowMeTM	AF008	Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.	Series 7 or 5 gauge or indicator with load cell 09-1214 interface cable
Travel indication	AF009	Travel is indicated on the control unit display, with output via USB. The most recent position is displayed upon powering on. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.	Field hardware installation required. If data output to a PC is required, add 09-1214 and 09-1158 cables, and a Series 7 or 5 gauge or indicator with load cell.
Computer control	AF010	The ESM303 may be fully controlled by a PC through a custom- written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR™gauge Plus software.	Series 7 or 5 gauge or indicator with load cell AF009 travel indication 09-1214 interface cable 09-1158 USB output cable For full speed range, consider AF017 and AF018 speed range extensions
Programmable travel limits	AF011	The stand stops at or cycles between programmable upper and lower travel distances.	- AF009 travel indication option
Overload protection	AF012	Protects a force gauge or force sensor against overload. Program the desired percentage of full scale of the gauge. Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output.	Series 7 or 5 gauge or indicator with load cell 09-1214 interface cable
Auto return	AF013	The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.	If reversing at force set point: Series 7 or 5 gauge or indicator with load cell, and 09-1214 interface cable If reversing at travel limit: AF011 programmable travel limits option If reversing at break: AF019 break detection op- tion and 09-1214 interface cable
Cycling / dwell time	AF014	Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds.	- Same as auto return, at the same speed in each direction. Add AF016 for independent up and down speeds.
Independent up and down speeds	AF016	Individually configure speeds for the up and down directions.
Low speed range extension	AF017	Extends the standard speed range down to 0.02 in/min (0.5 mm/min).
High speed range extension	AF018	Extends the standard speed range up to 45 in/min (1,100 mm/min).
Break detection	AF019	Crosshead stops at a sudden drop in force. Programmable percentage of peak force.	Series 7 or 5 gauge or indicator with load cell 09-1214 interface cable
Load holding	AF020	Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.	Series 7 or 5 gauge or indicator with load cell If a specified time is required, add AF014 cycling / dwell time option 09-1214 interface cable
Preload / sample touch	AF021	Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.	AF009 travel indication Series 7 or 5 gauge or indicator with load cell 09-1214 interface cable
Profiles	AF022	Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.
Complete options package	AFCOMP	Includes all functions listed above, plus 09-1214 interface cable and 09-1158 USB cable. Requires a Series 7 or 5 gauge or indicator with load cell.

4. ORDERING INFORMATION

Hardware
ESM303	Motorized test stand,110V*
09-1214	Interface cable, gauge / indicator to ESM303
09-1158	USB output cable
AC1062	Load cell / indicator mounting kit
ESM303-001-1 / -2 / -3	Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]
ESM303-002-1 / -2 / -3	Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]
ESM303-003	Safety shield
Controller Options
AF008	FollowMeTM force-based manual positioning
AF009	Travel indication, with USB output
AF010	Computer control, via USB
AF011	Programmable travel limits
AF012	Integrated overload protection
AF013	Auto return
AF014	Cycling / dwell time
AF016	Independent up and down speeds
AF017	Extended speed range, low
AF018	Extended speed range, high
AF019	Break detection
AF020	Load holding
AF021	Preload / sample touch
AF022	Profiles
AFCOMP	Complete options package (includes all Controller Options, plus 09-1124 and 09-1158 cables)

5. CẤU TẠO ESM303

6. BẢN VẼ KĨ THUẬT

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM303 Mark-10 appeared first on thietbicongnghiepnang.com.

Máy đo lực ESM1500 Mark-10

thietbicongnghiepnang — 2019-10-09 09:05:44

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM1500 Mark 10

Force measurement to 1,500 lbF (6.7 kN)
32" of travel
PC control available
Stop / cycle at force, travel, or limit switch
Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM1500 Mark-10 appeared first on thietbicongnghiepnang.com.

Máy đo lực ESM1500S Mark-10

thietbicongnghiepnang — 2019-10-09 09:05:36

Nhà phân phối thiết bị TEST, thiết bị phòng LAB, thiết bị đo lực của hãng MARK-10

Tăng Minh Phát - Chuyên phân phối dụng cụ đo của hãng Mark 10 tại Việt Nam

Thiết bị đo lực kéo, nén, căng ESM1500S Mark-10

Force measurement to 1,500 lbF (6.7 kN)
14.2" of travel
PC control available
Stop / cycle at force, travel, or limit switch
Overload protection

Xem thêm chi tiêt : TẠI ĐÂY

The post Máy đo lực ESM1500S Mark-10 appeared first on thietbicongnghiepnang.com.

Máy đo lực kéo, lực nén Mark-10

thietbicongnghiepnang — 2019-10-04 11:04:28

TMP VIETNAM - Chuyên cung cấp thiết bị đo lực hãng Mark 10 tại Việt Nam

Đại lý phân phối thiết bị hãng Mark-10 tại Việt Nam

Máy đo lực kéo - lực nén - lực căng Mark-10

Mục lục nội dung

1. Ứng dụng của máy đo lực Mark 10

a. Ứng dụng Mark 10 trong ngành bao bì

b. Ứng dụng Mark 10 trong ngành y tế

c. Ứng dụng Mark 10 trong ngành hàng không

d. Ứng dụng Mark 10 trong ngành sản xuất thiết bị điện tử

e. Ứng dụng Mark 10 trong ngành thực phẩm

2. So sánh các loại máy đo lực hãng Mark 10

3. Cấu tạo

4. Bản vẽ kỹ thuật

5. Chọn option

6. Máy đo lực Mark 10

a. ESM303 Mark10

b. ESM750 Mark10

c. ESM750S Mark10

d. ESM1500S Mark10

e. ESM1500 Mark10

1. Một số ứng dụng của máy đo lực Mark 10

a. Ứng dụng Mark 10 trong ngành bao bì

b. Ứng dụng Mark 10 trong ngành y tế

c. Ứng dụng Mark 10 trong ngành hàng không

d. Ứng dụng Mark 10 trong ngành sản xuất linh kiện điện tử

e. Ứng dụng Mark 10 trong ngành thực phẩm

2. So sánh các loại máy đo lực hãng Mark 10

	ESM1500	ESM1500S	ESM750	ESM750S
Load capacity:	1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min 1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min		750 lbF [3.4 kN] at < 35 in [900 mm]/min 500 lbF [2.3 kN] at > 35 in [900 mm]/min
Maximum travel:	32.0 in [813 mm]	14.2 in [360 mm]	32.0 in [813 mm]	14.2 in [360 mm]
Standard speed range:	0.5 - 24 in/min [10 - 600 mm/min]
Optional speed range:	0.001 - 90 in/min [0.02 - 2,300 mm/min]		0.001 - 60 in/min [0.02 - 1,525 mm/min]
Speed setting accuracy:	±0.2%
Speed variation with load:	±0% [Stepper motor driven]
Travel accuracy:	±0.002 in. per 10 in. [±0.05 mm per 250 mm]
Travel resolution:	0.001 in [0.02 mm]
Limit switch repeatability:	±0.001 in [0.03 mm]
Power:	Universal input 80-240 VAC, 50/60 Hz, 450 W		Universal input 80-240 VAC, 50/60 Hz, 120 W
Weight (test stand only):	198 lb [90 kg]	160 lb [72 kg]	185 lb [84 kg]	150 lb [68 kg]
Shipping weight:	248 lb [113 kg]	206 lb [93 kg]	236 lb [107 kg]	196 lb [88 kg]
Warranty:	1 years [see individual statement for further details]
Conformance:	CE

5. Chọn option

Test Stands
ESM1500LC	Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V1
ESM1500FG2	Motorized test stand with force gauge mount, 1,500 lbF, 110V1
ESM1500SLC	Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V1
ESM1500SFG2	Motorized test stand with force gauge mount, 1,500 lbF, 110V1
ESM750SC	Motorized test stand with force sensor / load cell mount, 750 lbF, 110V1
ESM750FG2	Motorized test stand with force gauge mount, 750 lbF, 110V1
ESM750SLC	Motorized test stand with force sensor / load cell mount, 750 lbF, 110V1
ESM750SFG2	Motorized test stand with force gauge mount, 750 lbF, 110V1
Hardware Options
AC1054	Base plate, multiple center hole threads
AC1055	Base plate, matrix of threaded holes
Optional Functions
SF008	FollowMe® force-based manual positioning
SF009	Travel indication, with USB output, ESM1500 / ESM750
SF009-1	Travel indication, with USB output, ESM1500S / ESM750S
SF010	Computer control, via USB
SF011	Programmable travel limits
SF012	Integrated overload protection
SF013	Auto return
SF014	Cycling / dwell time
SF016	Independent up and down speeds
SF017	Extended speed range, low
SF018	Extended speed range, high, ESM1500 / ESM1500S
SF018-1	Extended speed range, high, ESM750 / ESM750S
SF019	Break detection
SF020	Loadholding
SF021	Preload / sample touch
SF022	Profiles
SFCOMP	Complete options package, ESM1500 / ESM750
SFCOMP-1	Complete options package, ESM1500S / ESM750S

*** LƯU Ý : Tùy theo mục đích sử dụng khác nhau sẽ có những option khác nhau. Xin liên hệ với chúng tôi để được tư vấn và hỗ trợ tốt nhất.

6. Máy đo lực Mark 10

a. ESM303 Mark10

Selectable speed setting
Upper and lower travel limit switches
Adjustable, removal controller with intuitive menu navigation
Password protection of test parameters
Stepper motor-driven, producing smooth and quiet operation with no speed variation under load
USB output of force vs. time or force vs. travel
Compact footprint, suitable for crowded workbenches
Ergonomic design, with smart, clean cable management
Integrated electronics assembly, easily removed and transported
Adjustable mounting plate with T-slot base

Load capacity:	300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min) 200 lbF (1 kN) @ >24 in/min (610 mm/min)
Maximum travel distance:	18.0 in (457 mm)
Speed range:	Standard: 0.5 - 13 in/min (13 - 330 mm/min) Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min)
Speed setting accuracy:	±0.2% of setting
Speed variation with load:	±0% (stepper motor driven)
Travel accuracy*:	±0.002 in. per 10 in. (±0.05 mm per 250 mm)
Travel resolution:	0.001 in / 0.02 mm
Limit switch repeatability:	0.001 in (0.03 mm)
Power:	Universal input 80-240 VAC, 50/60 Hz, 60W
Weight:	56.5 lb (25.6 kg)

máy đo lực kéo, máy đo lực kéo đứt , máy đo lực kéo đẩy

b. ESM750 Mark10

Broad force range and clearance dimensions
Compatible with load cells and force gauges
USB output of force vs. time or force vs. distance
Adjustable, removal control panel with intuitive menu navigation
Unique modular function platform - select functions as required for the application
Password protection of test parameters
Stepper motor-driven, producing smooth and quiet operation with no speed variation under load
Compact footprint, suitable for crowded workbenches
Most electronics are housed in an integrated removeable enclosure, easily accessed for service

máy đo lực ép, máy đo lực nén

c. ESM750S Mark10

máy đo lực căng cáp thép

Máy đo lực căng dây điện, cáp quang

e. ESM1500 Mark10

Ngoài ra, TMP còn chuyên cung cấp máy đo lực vặn nắp chai

The post Máy đo lực kéo, lực nén Mark-10 appeared first on thietbicongnghiepnang.com.

Đại lý phân phối Mark-10 tại Việt Nam

thietbicongnghiepnang — 2019-10-04 10:04:52

Tăng Minh Phát - Chuyên cung cấp thiết bị đo lực của hãng Mark 10, máy đo lực kéo, lực nén, lực văn nắp chai...

Tăng Minh Phát - Hân hạnh là đại diện chính thức của hãng Mark-10 tại Việt Nam

MARK 10 VIETNAM

Mark-10 được thành lập từ năm 1979, có trụ sợ chính đặt tại New York / USA

Mark 10 chuyên sản xuất các thiết bị đo lực : lực kéo, lực nén, lực căng với độ chính xác cao, cùng với đó các chuyên gia Mark 10 đã thiết kế phần mềm tích hợp vào các sản phẩm để người dùng có thể lưu trữ dữ liệu các mẫu test được tối ưu. Ngoài ra, Mark 10 đã phát triển được phần mềm có thể đọc và lưu trữ nhiều mẫu test cùng 1 lúc. Đó là ưu điểm vượt trội của Mark 10 so với nhiều thiết bị đo lực khác trên thị trường

Máy đo lực kéo, lực nén ESM15000 Mark 10

ESM1500 được xem là xương sống của Mark 10, có thể đáp ứng được hầu như mọi yêu cầu của khách hàng, từ test nhanh đến test tự động, cũng như test nhiều mẫu cùng lúc

The post Đại lý phân phối Mark-10 tại Việt Nam appeared first on thietbicongnghiepnang.com.