Tăng Minh Phát

EK1110-0044 Beckhoff | Thiết bị mạng EtherCAT Beckhoff

thietbicongnghiepnang — 2022-04-12 16:03:22

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

EK1110-0044 |EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction

The EK1110-0044 EtherCAT EJ Coupler connects the compact Embedded PCs from the CX series and the attached EtherCAT Terminals with the EtherCAT plug-in modules on an application-specific circuit board (signal distribution board)

Technical data	EK1110-0044
Task within EtherCAT system	forwarding of E-bus signals to the signal distribution board (EJ board)
Data transfermedium	X1: Ethernet/EtherCAT cable (min. Cat.5), shielded, X2: PCB tracks on the signal distribution board
Distance between stations	100 m (100BASE-TX)
Delay	approx. 1 µs
Data transferrates	100 Mbit/s
Bus interface	X1: 1 x RJ45, X2: plug connector on the rear side of the EtherCAT EJ coupler
Power supply	from E-bus, Embedded PC power supply module
Current consumption E-bus	typ. 140 mA
Electricalisolation	500 V (supply voltage/Ethernet)
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.	IP20/see documentation
Approvals/markings	CE

Tăng Minh Phát hân hạnh là Đại diện hãng BECKHOFF tại Việt Nam

<< Quay lại

The post EK1110-0044 Beckhoff | Thiết bị mạng EtherCAT Beckhoff appeared first on thietbicongnghiepnang.com.

EK1828 Beckhoff | Thiết bị mạng EtherCAT Beckhoff

thietbicongnghiepnang — 2019-06-07 20:27:48

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

EK1828 | EtherCAT Coupler with integrated digital inputs/outputs

The EtherCAT Couplers from the EK18xx series combine the functionalities of the EK1100 EtherCAT Coupler with standard digital I/Os in one housing. This results in a compact design that is especially suitable for applications with a low number of I/Os. Like the EK1100, the EK18xx coupler can be extended by all EL/ES terminals. The digital I/Os are implemented with a 1-wire technique. The wiring can be implemented without tools using a direct plug-in technique with solid wire conductors or ferrules.

The EK1828 has four digital inputs and eight digital outputs.

Technical data	EK1828
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Bus interface	2 x RJ45
Nominal voltage	24 V DC (-15 %/+20 %)
Current supply E-bus	1000 mA
Current consumption from UP	40 mA + load
Current consumption from US	100 mA + (∑ E-bus current/4)
Number of inputs	4
Specification	EN 61131-2, type 1/3
“0“ signal voltage	-3…+5 V (EN 61131-2, type 1/3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input filter	3.0 ms
Input current	typ. 3 mA (EN 61131-2, type 3)
Number of outputs	8
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. < 2 A
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, TOFF: 300 µs
Electrical isolation	500 V (power contact/supply voltage/Ethernet), 500 V (E-bus/field potential)
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

Tăng Minh Phát hân hạnh là Đại diện hãng BECKHOFF tại Việt Nam

The post EK1828 Beckhoff | Thiết bị mạng EtherCAT Beckhoff appeared first on thietbicongnghiepnang.com.

EK1561 Beckhoff | 1-port EtherCAT plastic optical fibre junction

thietbicongnghiepnang — 2019-06-07 20:13:16

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý phân phối Beckhoff Việt Nam | Beckhoff Việt Nam

EK1561 | 1-port EtherCAT plastic optical fibre junction

In connection with an EK1100 EtherCAT coupler, the EK1561 single-port POF branch makes it possible to convert from 100BASE-TX physics to 100BASE-FX physics (POF – Plastic Optical Fibre). Distances of up to 50 m between two couplers can be bridged using the EK1561 and the EK1541 EtherCAT Coupler for POF. Unlike the glass fibre, the POF fibre is easily wireable in the field. The Run LED indicates the status of the EK1561.

Technical data	EK1561
Task within EtherCAT system	coupling of EtherCAT junctions via POF
Data transfer medium	plastic optical fibre (POF)
Distance between stations	max. 50 m (100BASE-FX)
Number of EtherCAT Terminals	–
Type/number of peripheral signals	–
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	1 x ZS1090-0008 POF plug
Power supply	from E-bus
Current consumption E-bus	typ. 200 mA
Current consumption 24 V DC	–
Weight	approx. 65 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

Tăng Minh Phát hân hạnh là Đại lý hãng BECKHOFF Việt Nam

The post EK1561 Beckhoff | 1-port EtherCAT plastic optical fibre junction appeared first on thietbicongnghiepnang.com.

EK1914 Beckhoff | EtherCAT Coupler Beckhoff

thietbicongnghiepnang — 2019-06-07 20:10:49

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os

The EK1914 EtherCAT Coupler combines the functionalities of the EK1100 EtherCAT Coupler with standard and safe digital I/Os. This results in a compact design that is especially suitable for applications with a low number of I/Os.

Like the EK1100, the EK1914 can be extended by all EL/ES terminals. The EK1914 has four digital inputs and four digital outputs as well as two fail-safe inputs and two fail-safe outputs.

Technical data	EK1914
Connection technology	1-/2-wire
Specification	EtherCAT Coupler with standard and safety I/Os
Number of inputs	6 digital inputs, 2 of which are fail-safe inputs
Number of outputs	6 digital outputs, 2 of which are fail-safe outputs
Max. output current	per standard output: 0.5 A, per safe output: 0.5 A, min. 20 mA
Protocol	EtherCAT
Fault response time	≤ watchdog time
Installation position	horizontal
Safety standard	DIN EN ISO 13849-1:2008 (Cat. 4, PL e)
Approvals	CE, UL, TÜV SÜD
Weight	approx. 123 g
Protection class	IP 20

The post EK1914 Beckhoff | EtherCAT Coupler Beckhoff appeared first on thietbicongnghiepnang.com.

EK1828-0010 Beckhoff | EtherCAT Coupler with integrated digital outputs

thietbicongnghiepnang — 2019-06-07 20:09:46

EK1828-0010 Beckhoff | EtherCAT Coupler with integrated digital outputs Readmore

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1828-0010 | EtherCAT Coupler with integrated digital outputs

The EK1828-0010 has eight digital outputs.

Technical data	EK1828-0010
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Bus interface	2 x RJ45
Nominal voltage	24 V DC (-15 %/+20 %)
Current supply E-bus	1000 mA
Current consumption from UP	40 mA + load
Current consumption from US	100 mA + (∑ E-bus current/4)
Number of inputs	–
Specification	–
“0“ signal voltage	–
“1“ signal voltage	–
Input filter	–
Input current	–
Number of outputs	8
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. < 2 A
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, TOFF: 300 µs
Electrical isolation	500 V (power contact/supply voltage/Ethernet), 500 V (E-bus/field potential)
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

The post EK1828-0010 Beckhoff | EtherCAT Coupler with integrated digital outputs appeared first on thietbicongnghiepnang.com.

EK1818 Beckhoff | EtherCAT Coupler with integrated digital inputs/outputs

thietbicongnghiepnang — 2019-06-07 20:06:33

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

EK1818 | EtherCAT Coupler with integrated digital inputs/outputs

The EK1818 has eight digital inputs and four digital outputs.

Technical data	EK1818
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Bus interface	2 x RJ45
Nominal voltage	24 V DC (-15 %/+20 %)
Current supply E-bus	1000 mA
Current consumption from UP	40 mA + load
Current consumption from US	100 mA + (∑ E-bus current/4)
Number of inputs	8
Specification	EN 61131-2, type 1/3
“0“ signal voltage	-3…+5 V (EN 61131-2, type 1/3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input filter	3.0 ms
Input current	typ. 3 mA (EN 61131-2, type 3)
Number of outputs	4
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. < 2 A
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, TOFF: 300 µs
Electrical isolation	500 V (power contact/supply voltage/Ethernet), 500 V (E-bus/field potential)
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

The post EK1818 Beckhoff | EtherCAT Coupler with integrated digital inputs/outputs appeared first on thietbicongnghiepnang.com.

EK1814 Beckhoff | Module truyền thông Beckhoff

thietbicongnghiepnang — 2019-06-07 20:05:20

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1814 | EtherCAT Coupler with integrated digital inputs/outputs

The EK1814 has four digital inputs and four digital outputs.

Technical data	EK1814
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Bus interface	2 x RJ45
Nominal voltage	24 V DC (-15 %/+20 %)
Current supply E-bus	1000 mA
Current consumption from UP	40 mA + load
Current consumption from US	100 mA + (∑ E-bus current/4)
Number of inputs	4
Specification	EN 61131-2, type 1/3
“0“ signal voltage	-3…+5 V (EN 61131-2, type 1/3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input filter	3.0 ms
Input current	typ. 3 mA (EN 61131-2, type 3)
Number of outputs	4
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (short-circuit-proof) per channel
Short circuit current	typ. < 2 A
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, TOFF: 300 µs
Electrical isolation	500 V (power contact/supply voltage/Ethernet), 500 V (E-bus/field potential)
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

The post EK1814 Beckhoff | Module truyền thông Beckhoff appeared first on thietbicongnghiepnang.com.

EK1541 Beckhoff | EtherCAT Coupler with ID switch

thietbicongnghiepnang — 2019-06-07 19:58:20

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1541 | EtherCAT Coupler with ID switch, plastic optical fibre

The EK1541 Coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1541 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extender. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. Distances of up to 50 m between two couplers can be attained using the Plastic Optical Fibre (POF) connection. Unlike the glass fibre, the POF fibre is easily wireable in the field. The EK1541 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can be located at any position within the EtherCAT network. Variable topologies can therefore be easily implemented.

Technical data	EK1541
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT POF networks, with identity verification
Data transfer medium	plastic optical fibre (POF)
Distance between stations	max. 50 m (100BASE-FX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x ZS1090-0008 POF plug
Power supply	24 V DC (-15 %/+20 %)
Input current	130 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	24 V DC max./10 A max.
Weight	approx. 190 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

The post EK1541 Beckhoff | EtherCAT Coupler with ID switch appeared first on thietbicongnghiepnang.com.

EK1521-0010 Beckhoff | 1-port EtherCAT fibre optic junction

thietbicongnghiepnang — 2019-06-07 19:57:34

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1541 | EtherCAT Coupler with ID switch, plastic optical fibre

Technical data	EK1541
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT POF networks, with identity verification
Data transfer medium	plastic optical fibre (POF)
Distance between stations	max. 50 m (100BASE-FX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x ZS1090-0008 POF plug
Power supply	24 V DC (-15 %/+20 %)
Input current	130 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	24 V DC max./10 A max.
Weight	approx. 190 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

The post EK1521-0010 Beckhoff | 1-port EtherCAT fibre optic junction appeared first on thietbicongnghiepnang.com.

EK1521 Beckhoff | 1-port EtherCAT fibre optic junction

thietbicongnghiepnang — 2019-06-07 19:57:08

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1521 | 1-port EtherCAT fibre optic junction

In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.

Technical data	EK1521
Task within EtherCAT system	coupling of EtherCAT junctions via multimode glass fibre
Data transfer medium	multimode glass fibre 50/125 µm (MM)
Distance between stations	max. 2000 m (100BASE-FX)
Number of EtherCAT Terminals	–
Type/number of peripheral signals	–
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	1 x SC Duplex
Power supply	from E-bus
Current consumption E-bus	typ. 350 mA
Current consumption 24 V DC	–
Weight	approx. 65 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1521 Beckhoff | 1-port EtherCAT fibre optic junction appeared first on thietbicongnghiepnang.com.

EK1501-0100 Beckhoff | EtherCAT Coupler, media converter

thietbicongnghiepnang — 2019-06-07 19:56:41

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

EK1501-0100 | EtherCAT Coupler, media converter (multimode fibre optic IN, RJ45 OUT) with ID switch

The EK1501-0100 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501-0100 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The multimode glass fibre connection enables distances of up to 2 km between two couplers.

In addition, the coupler serves as media converter from optical fibre to copper. It is suitable for multimode optical fibre, always operates bidirectionally and collision-free with constant delay.

The EK1501-0100 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1501-0100
Task within EtherCAT system	media transition from multimode fibre optic to RJ45 copper physics and coupling of EtherCAT Terminals (ELxxxx)
Data transfer medium	multimode glass fibre 50/125 µm; Ethernet/EtherCAT cable (min. Cat.5), shielded
Distance between stations	max. 2000 m (100BASE-FX); max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	1 x SC Duplex; 1 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Input current	130 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	24 V DC max./10 A max.
Weight	approx. 190 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1501-0100 Beckhoff | EtherCAT Coupler, media converter appeared first on thietbicongnghiepnang.com.

EK1501-0010 Beckhoff | EtherCAT Coupler with ID switch

thietbicongnghiepnang — 2019-06-07 19:56:13

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

EK1501-0010 | EtherCAT Coupler with ID switch, fibre optic

The EK1501-0010 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501-0010 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The singlemode glass fibre connection enables distances of up to 20 km between two couplers.

The EK1501-0010 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1501-0010
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT networks, with identity verification
Data transfer medium	singlemode glass fibre 9/125 µm (SM)
Distance between stations	max. 20,000 m (100BASE-FX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x SC Duplex
Power supply	24 V DC (-15 %/+20 %)
Input current	150 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	24 V DC max./10 A max.
Weight	approx. 190 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1501-0010 Beckhoff | EtherCAT Coupler with ID switch appeared first on thietbicongnghiepnang.com.

EK1501 Beckhoff | EtherCAT Coupler with ID switch

thietbicongnghiepnang — 2019-06-07 19:55:47

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

Tăng Minh Phát hân hạnh là Đại diện phân phối thiết bị của hãng BECKHOFF tại Việt Nam

EK1501 | EtherCAT Coupler with ID switch, fibre optic

The EK1501 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The multimode glass fibre connection enables distances of up to 2 km between two couplers.

The EK1501 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1501
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT networks, with identity verification
Data transfer medium	multimode glass fibre 50/125 µm (MM)
Distance between stations	max. 2000 m (100BASE-FX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x SC Duplex
Power supply	24 V DC (-15 %/+20 %)
Input current	130 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	24 V DC max./10 A max.
Weight	approx. 190 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1501 Beckhoff | EtherCAT Coupler with ID switch appeared first on thietbicongnghiepnang.com.

EK1400 Beckhoff | EtherCAT G Coupler

thietbicongnghiepnang — 2019-06-07 19:55:14

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1400 | EtherCAT G Coupler

The EK1400 EtherCAT G Coupler connects EtherCAT G with the EtherCAT Terminals (ELxxxx). One station consists of an EK1400 Coupler, any number of EtherCAT Terminals and an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler provides the same functionality as a branch controller.

Technical data	EK1400
Task within EtherCAT system	coupling of EtherCAT Terminals to EtherCAT G networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (1000BASE-T)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	1 Gbit/s
Configuration	TwinCAT
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25…+55 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals/markings	CE

The post EK1400 Beckhoff | EtherCAT G Coupler appeared first on thietbicongnghiepnang.com.

EK1322 Beckhoff | 2-port EtherCAT P junction with feed-in

thietbicongnghiepnang — 2019-06-07 19:54:49

Công Ty Tăng Minh Phát - Nhà phân phối Beckhoff chính hãng - uy tín - chất lượng tại thị trường Việt Nam

Đại lý Beckhoff Việt Nam | Beckhoff Việt Nam

EK1322 | 2-port EtherCAT P junction with feed-in

The 2-port EK1322 EtherCAT P junction enables configuration of EtherCAT P star topologies. The ports can be used to connect individual EtherCAT P devices or whole EtherCAT P strands. The EK1322 can be installed at any point in an EtherCAT strand between the EtherCAT Terminals (ELxxxx). The front terminal points are used for the system and sensor supply US and the peripheral voltage for actuators UP for the EtherCAT P outputs. In addition to the Run LED and the link and activity status of the respective port, two status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

Technical data	EK1322
Task within EtherCAT system	coupling of EtherCAT P junctions
Data transfer medium	EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks
Bus interface	2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply	external feed-in: 24 V DC for US and UP
Total current	max. 3 A per US and UP
Current consumption from US	typ. 3 mA
Current consumption from UP	typ. 3 mA
Current rating per port	max. 3 A per US and UP
Current consumption E-bus	200 mA
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EK1322 Beckhoff | 2-port EtherCAT P junction with feed-in appeared first on thietbicongnghiepnang.com.

EK1310 Beckhoff | 1-port EtherCAT P extension with feed-in

thietbicongnghiepnang — 2019-06-07 13:42:13

TMP VIETNAM - Đại lý phân phối thiết bị mạng của hãng Beckhoff tại Việt Nam

Nhà cung cấp Beckhoff Việt Nam | Beckhoff Việt Nam | EtherCAT Beckhoff

EK1310 | 1-port EtherCAT P extension with feed-in

The EK1310 EtherCAT P feed-in unit enables conversion from EtherCAT to EtherCAT P or extension of an EtherCAT P network. Terminal points are used to supply the US (system and sensor supply) and the UP (peripheral voltage for actuators) for the EtherCAT P circuit. In addition to the Run LED and the link and activity status, status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

Technical data	EK1310
Task within EtherCAT system	conversion of the E-bus signals to 100BASE-TX Ethernet for feed-in in the EtherCAT P network
Data transfer medium	EtherCAT P cable, shielded, to 100BASE-TX
Bus interface	1 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply	external feed-in: 24 V DC for US and UP
Total current	max. 3 A per US and UP
Current consumption from US	typ. 3 mA
Current consumption from UP	typ.3 mA
Current rating per port	max. 3 A per US and UP
Current consumption E-bus	typ. 110 mA
Electrical isolation	500 V (supply voltage U_s/supply voltage U_p/EtherCAT)
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EK1310 Beckhoff | 1-port EtherCAT P extension with feed-in appeared first on thietbicongnghiepnang.com.

EK1300 Beckhoff | EtherCAT P coupler

thietbicongnghiepnang — 2019-06-07 13:41:13

EK1300 Beckhoff | EtherCAT P coupler Readmore

Tăng Minh Phát hân hạnh là Đại diện cung cấp BECKHOFF tại Việt Nam

The post EK1300 Beckhoff | EtherCAT P coupler appeared first on thietbicongnghiepnang.com.

EK1122-0080 Beckhoff | 2-port EtherCAT junction

thietbicongnghiepnang — 2019-06-07 13:40:25

EK1122-0080 Beckhoff | 2-port EtherCAT junction Readmore

Tăng Minh Phát hân hạnh là Đại diện cung cấp BECKHOFF tại Việt Nam

The post EK1122-0080 Beckhoff | 2-port EtherCAT junction appeared first on thietbicongnghiepnang.com.

EK1122-0008 Beckhoff | 2-port EtherCAT junction with M8 connection

thietbicongnghiepnang — 2019-06-07 13:38:47

EK1122-0008 Beckhoff | 2-port EtherCAT junction with M8 connection Readmore

Tăng Minh Phát hân hạnh là Đại diện cung cấp BECKHOFF tại Việt Nam

The post EK1122-0008 Beckhoff | 2-port EtherCAT junction with M8 connection appeared first on thietbicongnghiepnang.com.

EK1122 Beckhoff | 2-port EtherCAT junction

thietbicongnghiepnang — 2019-06-07 13:37:39

TMP VIETNAM - Đại lý phân phối thiết bị mạng của hãng Beckhoff tại Việt Nam

Nhà cung cấp Beckhoff Việt Nam | Beckhoff Việt Nam | EtherCAT Beckhoff

EK1122 | 2-port EtherCAT junction

The 2-port EtherCAT junction enables configuration of EtherCAT star topologies. A modular EtherCAT star can be realised by using several EK1122 units in a station. Individual devices or complete EtherCAT strands can be connected at the junction ports. The EtherCAT junctions are connected via RJ45 sockets with direct display of link and activity status. The Run LED indicates the status of the EK1122. Through TwinCAT and other suitable EtherCAT masters the EK1122 also supports coupling and uncoupling of EtherCAT strands during operation (Hot Connect).

Technical data	EK1122
Task within EtherCAT system	coupling of EtherCAT junctions
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	100 m (100BASE-TX)
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	2 x RJ45
Power supply	from E-bus
Current consumption	typ. 220 mA
Weight	approx. 65 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1122 Beckhoff | 2-port EtherCAT junction appeared first on thietbicongnghiepnang.com.

EK1121-0010 Beckhoff | 1-port EtherCAT junction

thietbicongnghiepnang — 2019-06-07 13:36:27

TMP VIETNAM - Đại lý phân phối thiết bị mạng của hãng Beckhoff tại Việt Nam

Nhà cung cấp Beckhoff Việt Nam | Beckhoff Việt Nam | EtherCAT Beckhoff

EK1121-0010 | 1-port EtherCAT junction, Extended Distance

In combination with an EK1101-0010 EtherCAT Extended Distance Coupler, the single-port EK1121-0010 EtherCAT Extended Distance junction enables the bridging of distances up to 300 m. The EK1121-0010 can be installed at any point in an EtherCAT segment between the EtherCAT Terminals (ELxxxx). The EtherCAT junction is connected via an RJ45 socket. The link and activity status is displayed directly at the port next to the Run LED.

Technical data	EK1121-0010
Task within EtherCAT system	coupling of 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 300 m (copper, Cat. 5, 4-wire)
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	1 x RJ45
Power supply	from E-bus
Current consumption	typ. 160 mA
Weight	approx. 65 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EK1121-0010 Beckhoff | 1-port EtherCAT junction appeared first on thietbicongnghiepnang.com.

EK1110-0043 Beckhoff | Thiết bị đầu cuối Beckhoff

thietbicongnghiepnang — 2019-06-07 13:35:15

TMP VIETNAM - Đại lý phân phối thiết bị mạng của hãng Beckhoff tại Việt Nam

Nhà cung cấp Beckhoff Việt Nam | Beckhoff Việt Nam | EtherCAT Beckhoff

EK1101 | EtherCAT Coupler with ID switch

The EK1101 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.

The EK1101 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1101
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption E-bus	–
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Weight	approx. 105 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1110-0043 Beckhoff | Thiết bị đầu cuối Beckhoff appeared first on thietbicongnghiepnang.com.

EK1110-0008 Beckhoff | EtherCAT extension with M8 connection

thietbicongnghiepnang — 2019-06-07 13:33:23

TMP VIETNAM - Đại lý phân phối thiết bị mạng của hãng Beckhoff tại Việt Nam

Nhà cung cấp Beckhoff Việt Nam | Beckhoff Việt Nam | EtherCAT Beckhoff

EK1100-0008 | EtherCAT Coupler with M8 connection

The EK1100-0008 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). One station consists of an EK1100-0008 coupler, any number of EtherCAT Terminals and a bus end cap. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. Compared with the EK1100, the EK1100-0008 has two M8 sockets, which are compatible with the EtherCAT Box modules.

The coupler is connected to the network via the upper Ethernet interface. The lower M8 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the EK1100-0008 coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The coupler BK9000 (for K-bus components) is suitable for installation at the switch. If Ethernet cables with adequate performance are used, e.g. ZK1090-3131-1xxx, line lengths of 100 m are possible via M8.

Technical data	EK1100-0008
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x M8, shielded, screw type
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1110-0008 Beckhoff | EtherCAT extension with M8 connection appeared first on thietbicongnghiepnang.com.

EK1110 Beckhoff | EtherCAT Beckhoff

thietbicongnghiepnang — 2019-06-07 11:15:34

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1110 | EtherCAT extension

Like the E-bus end terminal, the EK1110 EtherCAT extension is connected to the end of the EtherCAT Terminal block. The terminal offers the option of connecting an Ethernet cable with RJ45 connector, thereby extending the EtherCAT strand electrically isolated by up to 100 m. In the EK1110 terminal, the E-bus signals are converted on the fly to 100BASE-TX Ethernet signal representation. Power supply to the EK1110 electronics is via the E-bus. No parameterisation or configuration tasks are required.

Technical data	EK1110
Task within EtherCAT system	conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT network
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	100 m (100BASE-TX)
Protocol	any EtherCAT protocol
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	1 x RJ45
Power supply	from E-bus
Current consumption E-bus	typ. 130 mA
Electrical isolation	500 V (supply voltage/Ethernet)
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

The post EK1110 Beckhoff | EtherCAT Beckhoff appeared first on thietbicongnghiepnang.com.

EK1101-0080 Beckhoff | EtherCAT Coupler

thietbicongnghiepnang — 2019-06-07 11:13:13

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1101-0080 | EtherCAT Coupler with ID switch, Fast Hot Connect

Hot Connect is an EtherCAT feature for changing topologies through direct coupling or uncoupling during system operation. Coupled EtherCAT components are already quickly linked to the data communication after connection as standard. Fast Hot Connect technology further reduces the connection time significantly, enabling even faster tool changes. Fast Hot Connect ports may only be connected to each other, which is why they are specially identified.

The EK1101-0080 EtherCAT Coupler with Fast Hot Connect is complemented by the EK1122-0080 EtherCAT junction with Fast Hot Connect.

Technical data	EK1101-0080
Task within EtherCAT system	EtherCAT coupler with ID switch, Fast Hot Connect
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Input current	70 mA + (total E-bus current)/4
Current consumption E-bus	–
Current consumption 24 V DC	typ. 70 mA
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Weight	approx. 105 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1101-0080 Beckhoff | EtherCAT Coupler appeared first on thietbicongnghiepnang.com.

EK1101-0010 Beckhoff | Thiết bị đầu nối Beckhoff

thietbicongnghiepnang — 2019-06-07 11:12:55

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1101-0010 | EtherCAT Coupler with ID switch, Extended Distance

The EK1101-0010 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101-0010 coupler, any number of EtherCAT Terminals and a bus end cap. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.

Using the extended distance connection, distances of up to 300 m can be bridged between two Extended Distance Couplers. If only one connection of the two Couplers is configured for Extended Distance, the maximum distance between the stations is 100 m.

The EK1101-0010 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1101-0010
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 300 m (copper, Cat. 5, 4-wire)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	90 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Weight	approx. 105 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EK1101-0010 Beckhoff | Thiết bị đầu nối Beckhoff appeared first on thietbicongnghiepnang.com.

EK1101-0008 Beckhoff | EtherCAT Coupler with ID switch and M8 connection

thietbicongnghiepnang — 2019-06-07 11:12:14

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1101-0008 | EtherCAT Coupler with ID switch and M8 connection

The EK1101-0008 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). Compared with the EK1101, the EK1101-0008 has two M8 sockets, which are compatible with the EtherCAT Box modules. The coupler is connected to the network via the upper Ethernet interface. The lower M8 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the EK1100-0008 coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. If Ethernet cables with adequate performance are used, e.g. ZK1090-3131-1xxx, line lengths of 100 m are possible via M8.

The EK1101-0008 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.

Technical data	EK1101-0008
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Bus interface	2 x M8, shielded, screw type
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Current consumption E-bus	–
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Weight	approx. 110 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals/markings	CE

The post EK1101-0008 Beckhoff | EtherCAT Coupler with ID switch and M8 connection appeared first on thietbicongnghiepnang.com.

EK1101 Beckhoff | EtherCAT Coupler with ID switch

thietbicongnghiepnang — 2019-06-07 11:11:37

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1101 | EtherCAT Coupler with ID switch

Technical data	EK1101
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Type/number of peripheral signals	max. 4.2 GB addressable I/O points
Number of configurable IDs	4096
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption E-bus	–
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Weight	approx. 105 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1101 Beckhoff | EtherCAT Coupler with ID switch appeared first on thietbicongnghiepnang.com.

EK1100-0008 Beckhoff | EtherCAT Coupler with M8 connection

thietbicongnghiepnang — 2019-06-07 11:11:22

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1100-0008 | EtherCAT Coupler with M8 connection

Technical data	EK1100-0008
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbaud
Configuration	not required
Bus interface	2 x M8, shielded, screw type
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1100-0008 Beckhoff | EtherCAT Coupler with M8 connection appeared first on thietbicongnghiepnang.com.

EK1100 Beckhoff | EtherCAT Coupler

thietbicongnghiepnang — 2019-06-07 11:11:11

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1100 | EtherCAT Coupler

The EK1100 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). One station consists of an EK1100 coupler, any number of EtherCAT Terminals and a bus end terminal. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.

The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the EK1100 coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The couplers EK9000 and EK1000 are suitable for installation at the switch.

Technical data	EK1100
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Delay	approx. 1 µs
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	2 x RJ45
Power supply	24 V DC (-15 %/+20 %)
Current consumption from US	70 mA + (∑ E-bus current/4)
Current consumption from UP	load
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex, IECEx

The post EK1100 Beckhoff | EtherCAT Coupler appeared first on thietbicongnghiepnang.com.

EK1000 Beckhoff | EtherCAT TSN Coupler

thietbicongnghiepnang — 2019-06-07 11:02:27

Công Ty Tăng Minh Phát, chuyên phân phối thiết bị Beckhoff chính hãng - uy tín - chất lượng

Nhà phân phối Beckhoff Việt Nam | Beckhoff Vietnam | EtherCAT Beckhoff

EK1000 | Thiết bị mạng Beckhoff

The EK1000 EtherCAT Coupler supports EtherCAT communication via a switched Ethernet network, combining TSN (Time-Sensitive Networking) with the wide I/O range of EtherCAT Terminals. The EK1000 EtherCAT Coupler also enables EtherCAT communication in standard Ethernet networks. In addition, proven EtherCAT features such as distributed clocks and XFC can also be used within a TSN network. In this way, the EK1000 effectively links EtherCAT and TSN networks and combines their benefits: EtherCAT provides a real-time capable single-device level and is therefore ideally suited to combine the numerous small data packets of digital and analog inputs that are typical for industrial environments into a complete process image. TSN, on the other hand, defines a physical layer, which only relates to the switch layer in switched Ethernet networks. As a real-time extension of the general Ethernet technology, it controls the procedures and priorities for the transport of Ethernet telegrams through a TSN-capable, switched network. The EtherCAT Coupler has two RJ45 ports. One of these 100 Mbit/s ports connects the EK1000 to the Ethernet or TSN network. The second port enables EtherCAT network extensions, e.g. via the EK1100 EtherCAT Coupler. The EK1000 extends the TwinCAT automation software with a TSN-capable version of EtherCAT communication. In this way, TSN networks can also be managed seamlessly, and EtherCAT devices located in different terminal strands can be addressed via the TSN network.

Technical data	EK1000
Task within EtherCAT system	coupling of EtherCAT Terminals (ELxxxx) to TSN networks
Networks	mode 1: for unmanaged switch networks; mode 2: for TSN networks
Data transfer medium	Ethernet/EtherCAT cable (min. Cat. 5), shielded
Distance between stations	max. 100 m (100BASE-TX)
Number of EtherCAT Terminals	up to 65,534
Protocol	EtherCAT
Data transfer rates	100 Mbit/s
Configuration	not required
Bus interface	X001 (RJ45) = 100 Mbit/s Ethernet (TSN); X002 (RJ45) = 100 Mbit/s EtherCAT (EK1100 e.g.)
Power supply	24 V DC (-15 %/+20 %)
Current supply E-bus	2000 mA
Power contacts	max. 24 V DC/max. 10 A
Electrical isolation	500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EK1000 Beckhoff | EtherCAT TSN Coupler appeared first on thietbicongnghiepnang.com.