Tăng Minh Phát

EL1852, EL1859, EL1862, EL1872 Beckhoff

thietbicongnghiepnang — 2019-06-24 15:09:31

Nhà phân phối Module truyền thông Beckhoff (DI,DO)

Thiết bị đầu cuối Beckhoff

Beckhoff Vietnam chuyên cung cấp module truyền thông dùng trong công nghiệp

Technical data	EL1872
Connection technology	flat-ribbon cable
Specification	EN 61131-2, type 1/3
Number of inputs	16
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 1/3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	4 mA from the 24 V supply (no power contacts)
Current consumption E-bus	typ. 100 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	16 inputs
Configuration	no address or configuration setting
Special features	also available as ground switching
Weight	approx. 60 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL, Ex

EL1852 | 8-channel digital input + 8-channel digital output 24 V DC, flat-ribbon cable connection

The digital EL1852 EtherCAT Terminal combines eight digital inputs and eight digital outputs in one device. The inputs have a filter of 3.0 ms. The outputs process load currents up to 0.5 A, are short-circuit proof and protected against polarity reversal. The signal states are displayed by LEDs. The EL1852 offers a very compact design with its 16 channels. A 20-pin connector enables the secure connection of plug connectors using insulation displacement contact, as is usual for ribbon cables and special round cables. This significantly simplifies the wiring of many channels.

Technical data	EL1852
Connection technology	flat-ribbon cable
Specification	EN 61131-2, type 1/3
Number of channels	8 inputs + 8 outputs
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 1/3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (per channel)
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: 60 µs, TOFF: 300 µs
Current consumption power contacts	20 mA from the 24 V supply (no power contacts)
Current consumption E-bus	typ. 100 mA
Electrical isolation	500 V (E-bus/field potential)
Special features	combi EtherCAT Terminal, 8 x output 24 V DC, max. output current 0.5 A, load type: ohmic, inductive, lamp load, reverse voltage protection
Weight	approx. 65 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE

The post EL1852, EL1859, EL1862, EL1872 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1889, EL1904, EL1918, EL1957 Beckhoff

thietbicongnghiepnang — 2019-06-24 15:05:46

EL1889, EL1904, EL1918, EL1957 Beckhoff Readmore

Thiết bị đầu cuối EL1889, EL1904, EL1918, EL1957 Beckhoff

Phân phối Beckhoff Vietnam

EL1957 | 8-channel digital input, 4-channel digital output, TwinSAFE Logic, 24 V DC, 0.5 A

The EL1957 safety EtherCAT Terminal is a digital input and output terminal for sensors with potential-free contacts for 24 V DC. It has eight fail-safe inputs and four fail-safe outputs. Moreover, the EL1957 integrates a programmable TwinSAFE Logic enabling the implementation of safety applications directly in the terminal. Depending on the application, the safety-oriented information can be pre-processed directly in terminal, so that the central TwinSAFE Logic only has to process the aggregated information.

Technical data	EL1957
Connection technology	1-/2-wire
Specification	link unit between safe input and output signals
Number of inputs	8
Number of outputs	4
Max. output current	0.5 A
Protocol	TwinSAFE/Safety over EtherCAT
Fault response time	≤ watchdog time (parameterisable)
Installation position	horizontal
Safety standard	EN ISO 13849-1:2015 (Cat. 4, PL e) and EN 61508:2010 (SIL 3)
Approvals	CE, TÜV SÜD (certification in preparation)
Protection class	IP 20

EL1918 | 8-channel digital input terminal, TwinSAFE, 24 V DC, TwinSAFE Logic

The EL1918 TwinSAFE EtherCAT Terminal is a digital input terminal for sensors with potential-free contacts for 24 V DC. The EtherCAT Terminal has eight fail-safe inputs. The EL1918 integrates a programmable TwinSAFE Logic enabling the implementation of safety applications directly in the terminal. Depending on the application, the safety-oriented information can be pre-processed directly in the terminal so that the central TwinSAFE Logic need only process the information that is aggregated.

Technical data	EL1918
Connection technology	1-/2-wire
Safety standard	EN ISO 13849-1:2015 (Cat. 4, PL e) and EN 61508:2010 (SIL 3)
Number of inputs	8
Protocol	TwinSAFE/Safety over EtherCAT
Current consumption E-bus	typ. 165 mA
Fault response time	≤ watchdog time (parameterisable)
Supply voltage	24 V DC (-15 %/+20 %)
Nominal voltage	24 V DC (-15 %/+20 %)
Special features	8 safe inputs, integrated TwinSAFE Logic
Weight	approx. 50 g
Operating/storage temperature	-25…+55 °C/-40…+70 °C
Permitted degree of contamination	2
Climate class EN 60721-3-3	3K3
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
Installation position	horizontal
Protection class	IP 20
Approvals	CE, TÜV SÜD

The post EL1889, EL1904, EL1918, EL1957 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1382, EL1502, EL1512, EL1702 Beckhoff

thietbicongnghiepnang — 2019-06-24 15:01:59

EL1382, EL1502, EL1512, EL1702 Beckhoff Readmore

Thiết bị đầu cuối EL1382, EL1502, EL1512, EL1702 Beckhoff

Beckhoff Vietnam

EL1382 | 2-channel digital input terminal thermistor

The digital EL1382 input terminal analyses the input signal of thermistor sensors with the aid of a current loop and a voltage < 5 V. The EL1382 is a monitoring device for the thermal machine protection of PTC sensors, suitable for the direct monitoring of motors, bearings and equipment. In the process image, the state of the sensor is indicated by one bit each. A further bit reports short-circuits or line interruptions. Red or green LEDs indicate the state of the two input bits.

Technical data	EL1382 \| ES1382
Connection technology	2-wire
Specification	thermistor PTC
Number of inputs	2
Nominal voltage	24 V (-15 %/+20 %)
“0” signal voltage	≤ 1.5 kΩ
“1” signal voltage	≥ 3 kΩ
Signal “0“ release	≤ 1.5 kΩ
Signal “1“ excess temperature	≥ 3 kΩ
Sensor voltage	≤ 5 V
Diagnostics	open-circuit monitoring > 12 kΩ, short-circuit diagnostic < 25 Ω
Input filter	30 ms
Distributed clocks	–
Current consumption E-bus	typ. 120 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Special features	monitoring device for thermal machine protection
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL

EL1502 | Up/down counter 24 V DC, 100 kHz

The EL1502 EtherCAT Terminal is an up/down counter. It transmits the counter state to the higher-level automation device in an electrically isolated manner. When it is used as a single-channel up/down counter (32 bit), the pulse is set via the clock input, while the count direction is set via the up/down input. The input can also be used as a gate input for triggering the counter. In two-counter mode, two separate counters (Clock and Clock1 inputs) are available, which can be parameterised as up or down counters. The signal state of the inputs and outputs is indicated by light emitting diodes. Both outputs are switched according to the counter state, so that they can be used as fast control signals for field devices. The EL1502 device supports the distributed clocks function. This means the counter can be read at constant intervals (DC precision << 1 µs).

Technical data	EL1502 \| ES1502
Connection technology	1 x up/down counter, 2 x up or down counter
Specification	EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA
Number of counters	1 or 2
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 1)
“1” signal voltage	15…30 V (EN 61131-2, type 1)
Input current	typ. 5 mA (EN 61131-2, type 1)
Counting frequency	max. 100 kHz
Distributed clocks	yes
Max. output current	24 V/0.5 A (short-circuit proof) per channel
Current consumption power contacts	typ. 14 mA + load
Current consumption E-bus	typ. 130 mA
Counter depth	32 bit
Electrical isolation	500 V (E-bus/field potential)
Configuration	no address setting, configuration via the EtherCAT master
Special features	set counters, switch outputs
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1382, EL1502, EL1512, EL1702 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1258, EL1259, EL1262, EL1262-0050 Beckhoff

thietbicongnghiepnang — 2019-06-24 14:58:45

EL1258, EL1259, EL1262, EL1262-0050 Beckhoff Readmore

Thiết bị đầu cuối EL1258, EL1259, EL1262, EL1262-0050 Beckhoff

Beckhoff Việt Nam

EL1258 | 8-channel digital input terminal with multi-timestamping

The 8-channel digital input terminal EL1258 acquires fast binary control signals from the process level and transmits them electrically isolated to the controller. In comparison with the EL1252, the EL1258 not only offers a higher channel density, but thanks to the multi-timestamping function also a higher performance. Whereas the EL1252 can accept one edge change with timestamp per bus cycle, the EL1258 offers the possibility to register up to 32 events with timestamps. The reduced timestamp width of 32 bits, which corresponds to a resolution of 4.29 seconds, does not result in functional restrictions for most applications. Through the distributed clocks system, the EL1258 is synchronised with other EtherCAT devices, so that events in the whole system will be measured with a uniform time base.

Technical data	EL1258
Connection technology	2-wire
Number of inputs	8
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (IEC 61131-2, type 1/3)
“1“ signal voltage	11…30 V (IEC 61131-2, type 1/3)
Input current	typ. 3 mA (EN 61131-2, type 1/3)
Input filter	typ. < 1 µs
Internal sampling/execution	< 10…40 µs, corresponds to 100…25 k detectable edges/s, dependent on configuration
Distributed clock precision	<< 1 µs
Distributed clocks	yes
Current consumption power contacts	typ. 6 mA
Current consumption E-bus	typ. 130 mA
Electrical isolation	500 V (E-bus/field potential)
Configuration	no address or configuration setting
Special features	multi-timestamping
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Approvals	CE, UL

EL1259 | 8-channel digital input + 8-channel digital output with multi-timestamping

The 16-channel EL1259 digital EtherCAT Terminal combines the function of the EL1258 – eight multi-timestamping inputs – with those of the EL2258 – eight multi-timestamping outputs. The high channel density in conjunction with timestamping of the signals enables fast, efficient processes through optimised sensor and actuator control. The EL1259 is also synchronised with other devices through the distributed clocks system, so that events in the whole system can be measured with a uniform timebase. The combination of DC-switched inputs and outputs within one terminal can be used for local switching tasks.

Technical data	EL1259
Connection technology	1-wire
Number of channels	8 inputs + 8 outputs
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (IEC 61131-2, type 1/3)
“1“ signal voltage	11…30 V (IEC 61131-2, type 1/3)
Input current	typ. 3 mA (EN 61131-2, type 1/3)
Input filter	typ. < 1 µs
Internal sampling/execution	< 10…40 µs, corresponds to 100…25 k detectable edges/s, dependent on configuration
Distributed clock precision	<< 1 µs
Distributed clocks	yes
Load type	ohmic, inductive, lamp load
Max. output current	0.5 A (short-circuit-proof) per channel
Reverse voltage protection	yes
Breaking energy	< 150 mJ/channel
Switching times	typ. TON: < 1 µs, typ. TOFF: < 1 µs
Current consumption power contacts	typ. 30 mA + load
Current consumption E-bus	typ. 130 mA
Electrical isolation	500 V (E-bus/field potential)
Configuration	no address or configuration setting
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Special features	multi-timestamping, auto activation
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable (see documentation)
Approvals	CE, UL

The post EL1258, EL1259, EL1262, EL1262-0050 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1144, EL1202, EL1252, EL1252-0050 Beckhoff

thietbicongnghiepnang — 2019-06-24 14:54:32

EL1144, EL1202, EL1252, EL1252-0050 Beckhoff Readmore

Thiết bị đầu cuối EL1144, EL1202, EL1252, EL1252-0050 Beckhoff

Cung cấp Beckhoff Vietnam

EL1144 | 4-channel digital input terminal 12 V DC

The EL1144 digital input terminal acquires the binary control signals and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal contains four channels that indicate their signal state by means of light emitting diodes.

Technical data	EL1144 \| ES1144
Connection technology	2-/3-wire
Number of inputs	4
Nominal voltage	12 V DC
“0” signal voltage	< 2.4 V
“1” signal voltage	> 8.5 V
Input current	typ. 3.0 mA
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 14 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Configuration	no address or configuration setting
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1202 | 2-channel digital input terminal 24 V DC, TON/TOFF 1 µs

The EL1202 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. It is suitable for particularly fast signals due to its very low input delay. The EtherCAT Terminal can support distributed clocks, i.e. the input data can be monitored synchronously with other data that are also linked to distributed clock terminals. To this end, the user has to switch to terminal version EL1202-0100 (see documentation). The DC accuracy across the system is << 1 µs. For this, the user has to switch the terminal to the EL1202-0100 version (see documentation). The EL1202 contains two channels whose signal state is indicated via LEDs.

Technical data	EL1202 \| ES1202
Connection technology	4-wire
Specification	similar to EN 61131-2, type 3, “0”: -3…5 V DC, “1”: 11…30 V DC, typ. 3 mA input current
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (similar to EN 61131-2, type 3)
“1“ signal voltage	11…30 V (similar to EN 61131-2, type 3)
Input current	typ. 3 mA (similar to EN 61131-2, type 3)
Input filter	typ. < 1 µs
Precision of timestamp in the terminal	10 ns (+ input delay)
Distributed clock precision	<< 1 µs
Input delay TON/TOFF	< 1 µs
Distributed clocks	can be activated, see documentation
Current consumption power contacts	typ. 6 mA + load
Current consumption E-bus	typ. 110 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs
Configuration	no address or configuration setting
Special features	DC can be activated, see documentation
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1252 | 2-channel digital input terminal with timestamping

The EL1252 digital input terminal acquires the fast binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The signals are furnished with a timestamp that identifies the time of the last edge change with a resolution of 1 ns. This technology enables signals to be traced exactly over time and synchronised with the distributed clocks across the system. With this technology, machine-wide parallel hardware wiring of digital inputs or encoder signals for synchronisation purposes is often no longer required. In conjunction with the EL2252 EtherCAT Terminal (digital output terminal with timestamp), the EL1252 enables responses with equidistant time intervals, largely independent of the bus cycle time.

Technical data	EL1252 \| ES1252
Connection technology	4-wire
Specification	similar to EN 61131-2, type 3, “0”: -3…5 V DC, “1”: 11…30 V DC, typ. 3 mA input current
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (similar to EN 61131-2, type 3)
“1“ signal voltage	11…30 V (similar to EN 61131-2, type 3)
Input current	typ. 3 mA (similar to EN 61131-2, type 3)
Input filter	typ. < 1 µs
Resolution timestamp	1 ns (channel 0/1)
Precision of timestamp in the terminal	10 ns (+ input delay)
Distributed clock precision	<< 1 µs
Input delay TON/TOFF	< 1 µs
Distributed clocks	yes
Time resolution signal	1 ns
Current consumption power contacts	typ. 6 mA + load
Current consumption E-bus	typ. 110 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs + 36 byte timestamp
Configuration	no address or configuration setting
Special features	timestamping, latch last edge
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1144, EL1202, EL1252, EL1252-0050 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1104, EL1114, EL1124, EL1134 Beckhoff | Digital input terminal

thietbicongnghiepnang — 2019-06-24 11:28:51

EL1104, EL1114, EL1124, EL1134 Beckhoff | Digital input terminal Readmore

Nhà phân phối Beckhoff chính hãng | Beckhoff Vietnam

EL1104 | 4-channel digital input terminal 24 V DC, 24 V and 0 V sensor supply

The EL1104 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal contains four channels that indicate their signal state by means of light emitting diodes.

Technical data	EL1104 \| ES1104
Connection technology	2-/3-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	4 inputs for 2- and 3-wire connection
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1114 | 4-channel digital input terminal 24 V DC, 24 V and 0 V sensor supply

The EL1114 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal contains four channels that indicate their signal state by means of light emitting diodes.

Technical data	EL1114 \| ES1114
Connection technology	2-/3-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	4 inputs for 2- and 3-wire connection
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1104, EL1114, EL1124, EL1134 Beckhoff | Digital input terminal appeared first on thietbicongnghiepnang.com.

EL1084, EL1088, EL1094, EL1098 Beckhoff | Digital input terminal

thietbicongnghiepnang — 2019-06-24 10:42:03

EL1084, EL1088, EL1094, EL1098 Beckhoff | Digital input terminal Readmore

Thiết bị đầu cuối Beckhoff

Beckhoff- Germany

EL1084 | 4-channel digital input terminal 24 V DC, switching to ground potential

The EL1084 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Four 2-wire sensors can be connected to the EL1084. The EtherCAT Terminal indicates its signal state by means of light emitting diodes.

Technical data	EL1084 \| ES1084
Connection technology	2-wire
Specification	ground switching “0”: 18…30 V DC, “1”: 0…7 V DC, typ. 3 mA input current
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	18…30 V
“1” signal voltage	0…7 V
Input current	typ. 3.0 mA
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 20 mA
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	2-wire connection
Weight	approx. 50 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1084 | 4-channel digital input terminal 24 V DC, switching to ground potential

Technical data	EL1084 \| ES1084
Connection technology	2-wire
Specification	ground switching “0”: 18…30 V DC, “1”: 0…7 V DC, typ. 3 mA input current
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	18…30 V
“1” signal voltage	0…7 V
Input current	typ. 3.0 mA
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 20 mA
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	2-wire connection
Weight	approx. 50 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1084, EL1088, EL1094, EL1098 Beckhoff | Digital input terminal appeared first on thietbicongnghiepnang.com.

EL1052, ELX1052, EL1054, ELX1054 Beckhoff

thietbicongnghiepnang — 2019-06-24 10:27:25

EL1052, ELX1052, EL1054, ELX1054 Beckhoff Readmore

Thiết bị đầu cuối Beckhoff

Beckhoff- Germany

EL1052 | 2-channel digital input terminal NAMUR

The EL1052 digital input terminal acquires signals from NAMUR field devices according to IEC 60947-5-6. The sensors are supplied with a voltage of 8.2 V and return a diagnosable current signal. In this way, a wire breakage or short-circuit can be detected in addition to the switching state. The LEDs indicate signal or any error states, channel by channel.

Technical data	EL1052 \| ES1052
Technology	NAMUR
Specification	NAMUR DC switching amplifier (IEC 60947-5-6)
Signal type	binary, current input for NAMUR sensors
Number of inputs	2
Connection technology	2-wire
Open circuit voltage	typ. 8.2 V DC
“0” signal current	≤ 1.2 mA
“1” signal current	≥ 2.1 mA
Switching hysteresis	typ. 350 µA
Short circuit current	typ. 7.8 mA
Fault detection	I ≤ 200 µA (cable break), I ≥ 7.0 mA (short circuit)
Max. switching frequency	5 kHz (duty factor 50 %)
Internal resistance	according to I/V curve IEC 60947-5-6
Distributed clocks	–
Supply voltage electronics	24 V DC (via power contacts)
Current consumption E-bus	typ. 40 mA
Current consumption power contacts	typ. 20 mA + load
Electrical isolation	500 V (E-bus/field potential)
Special features	integrated reverse polarity protection
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, Ex, IECEx

EL1054 | 4-channel digital input terminal NAMUR

The EL1054 digital input terminal acquires signals from NAMUR field devices according to EN 60947-5-6. The sensors are supplied with a voltage of 8.2 V and return a diagnosable current signal. In this way, a wire breakage or short-circuit can be detected in addition to the switching state. The LEDs indicate signal or any error states, channel by channel.

Technical data	EL1054 \| ES1054
Technology	NAMUR
Specification	NAMUR DC switching amplifier (IEC 60947-5-6)
Signal type	binary, current input for NAMUR sensors
Number of inputs	4
Connection technology	2-wire
Open circuit voltage	typ. 8.2 V DC
“0” signal current	≤ 1.2 mA
“1” signal current	≥ 2.1 mA
Switching hysteresis	typ. 350 µA
Short circuit current	typ. 7.8 mA
Fault detection	I ≤ 200 µA (cable break), I ≥ 7.0 mA (short circuit)
Max. switching frequency	5 kHz (duty factor 50 %)
Internal resistance	according to I/V curve IEC 60947-5-6
Distributed clocks	–
Supply voltage electronics	24 V DC (via power contacts)
Current consumption E-bus	typ. 50 mA
Electrical isolation	500 V (E-bus/field potential)
Special features	integrated reverse polarity protection
Weight	approx. 60 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, Ex, IECEx

The post EL1052, ELX1052, EL1054, ELX1054 Beckhoff appeared first on thietbicongnghiepnang.com.

EL1014, EL1018, EL1024, EL1034 Beckhoff | Digital input terminal

thietbicongnghiepnang — 2019-06-24 10:21:13

Nhà cung cấp Beckhoff chính hãng tại Việt Nam

Thiết bị đầu cuối Beckhoff

Beckhoff- Germany

EL1014 | 4-channel digital input terminal 24 V DC, 10 µs

The EL1014 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL101x series have a 10 µs input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1014 \| ES1014
Connection technology	2-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	15…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	standard input terminals f0r 2-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

EL1018 | 8-channel digital input terminal 24 V DC, 10 µs

The EL1018 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL101x series have a 10 µs input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1018 \| ES1018
Connection technology	1-wire
Specification	EN 61131-2, type 1/3
Number of inputs	8
Nominal voltage	24 V DC (-15 %/+20 %)
“0“ signal voltage	-3…+5 V (EN 61131-2, type 3)
“1“ signal voltage	15…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 10 µs
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	8 inputs
Configuration	no address or configuration setting
Special features	standard input terminal for fast signals (filter 10 μs)
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/see documentation
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex

The post EL1014, EL1018, EL1024, EL1034 Beckhoff | Digital input terminal appeared first on thietbicongnghiepnang.com.

EL1002, EL1004, EL1008, EL1012 Beckhoff | Digital input terminal

thietbicongnghiepnang — 2019-06-24 10:10:45

Nhà cung cấp Beckhoff chính hãng tại Việt Nam

Thiết bị đầu cuối EL1002, EL1004, EL1008, EL1012 Beckhoff

Beckhoff- Germany

EL1002 | 2-channel digital input terminal 24 V DC, 3 ms

The EL1002 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1002 \| ES1002
Connection technology	4-wire
Specification	EN 61131-2, type 1/3
Number of inputs	2
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	2 inputs
Configuration	no address or configuration setting
Special features	4-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECEx

EL1004 | 4-channel digital input terminal 24 V DC, 3 ms

The EL1004 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

Technical data	EL1004 \| ES1004
Connection technology	2-wire
Specification	EN 61131-2, type 1/3
Number of inputs	4
Nominal voltage	24 V DC (-15 %/+20 %)
“0” signal voltage	-3…+5 V (EN 61131-2, type 3)
“1” signal voltage	11…30 V (EN 61131-2, type 3)
Input current	typ. 3 mA (EN 61131-2, type 3)
Input filter	typ. 3.0 ms
Distributed clocks	–
Current consumption power contacts	typ. 2 mA + load
Current consumption E-bus	typ. 90 mA
Electrical isolation	500 V (E-bus/field potential)
Bit width in the process image	4 inputs
Configuration	no address or configuration setting
Special features	standard input terminals for 2-wire connection
Weight	approx. 50 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all ESxxxx terminals
Approvals	CE, UL, Ex, IECE

EL1008 | 8-channel digital input terminal 24 V DC, 3 ms

The EL1008 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL100x series have a 3 ms input filter. The EtherCAT Terminals indicate their state via an LED.

EL1012 | 2-channel digital input terminal 24 V DC, 10 µs

The EL1012 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Digital input terminals from the EL101x series have a 10 µs input filter. The EtherCAT Terminals indicate their state via an LED.

The post EL1002, EL1004, EL1008, EL1012 Beckhoff | Digital input terminal appeared first on thietbicongnghiepnang.com.