Tăng Minh Phát

Loadcell RTN Schenck Process

thietbicongnghiepnang — 2019-09-26 11:58:42

TMP VIETNAM - Chuyên cung cấp cảm biến trọng lượng (load cell) Schenck Process chính hãng

Tăng Minh Phát - Chuyên cung cấp thiết bị Schenck Process chính hãng tại Việt Nam

Cảm biến trọng lượng Schenck Process

Ứng dụng :

Acting as a transducer, the load cell converts the mechanical input signal, the load, proportionally into the electrical output voltage.

The consistent optimization of the ringtorsion load cells offers additional advantages:

The extremely low headroom simplifies the use in almost all weighing applications
The sturdy design enables easy transport, installation, and operation, even under very harsh environmental conditions (e.g. aggressive media, inter- fering forces, or extreme tem-

peratures)

Chức năng:

High measuring sensitivity
High repeatability
High long-term stability and, thus, continuing and consist- ently high accuracy
Minimal effect on accuracy by side forces
High reliability and availability, even in case of unavoidable shock loads, constraining forc- es or electrical interferences
Integral excessive voltage protection

Moment-free load input/output due to direct, vertical force flow

Thông số kĩ thuật

Rated capacity	Emax	1 t – 470 t						1 t – 100 t
Accuracy class		0.05		C3				C5 / C4 Mi 7.5		Reference
Sensitivity	Cn	2.85 mV/V ±2.85 mV/V
Combined error	Fcomb	0.05 %		0.02 %				0.01 %		Cn
Minimum dead load output return	Fdr	±0.03 %		±0.016 %				±0.006 %		Cn
Creep (30 m)	Fcr	±0.04 %		±0.024 %				±0.009 %		Cn
Temperature effect on zero sensitivity per 10 K	TK0	±0.03 % ±0.05 %		±0.007 % ±0.02 %				±0.0058 % ±0.02 %		Cn, Btn Cn, Btu
Temperature effect on sensitivity per 10 K	TKc	±0.05 % ±0.07 %		±0.008 % ±0.02 %				±0.0062 % ±0.02 %		Cn, Btn Cn, Btu
Maximum number of scale intervalls	nLC			3000				5000
For multi-divisional scales	Z							7500
Minimum load cell verification intervall	Vmin			Emax/20000				Emax/24000
Max. utilisation range	Bamax	Bamax = Emax
Input resistance	Re	4450 W ±100 W								Tr
Output resistance	Ra	4010 W ±2 W		4010 W ±0.5 W						Tr
Zero signal	S0	±1 %								Cn
Max. supply voltage	Usmax	60 V
Nominal temperature range	Btn	-10 °C … +40 °C
Service temperature range Explosing-proof design	Btu	-40 °C … +80 °C, Option to +110 °C *) -30 °C … +70 °C
Reference temperature	Tr	22 °C
Storage temperature range	Bts	-50 °C … +85 °C
Protection class Explosing-proof design		IP68, 1 m / 100 h; (Option 110 °C: IP66) IP67
Cable specification		TPE (grey) Æ 6.5 mm, silicone and halogen free, -30 °C to +150 °C, Length 5 m for RTN 1 t - 15 t and RTN 150 t - 470 t Length 15 m for RTN 22 t - 100 t
Colour code		Black: Red: Yellow:	input output screening		+ +	/ blue: / white:	input output		- -
Material		Stainless steel
Corrosion protection		see Spec Sheet DDP8483 “Chemical resistance of RT Load Cells”

Order code:

Variants	Accuracy class
	0.05	C3	C5 / C4 Mi 7.5
RTN 1 t	D726173.04	D726173.02	D726173.10
RTN 2.2 t	D726174.04	D726174.02	D726174.10
RTN 4.7 t	D726175.04	D726175.02	D726175.10
RTN 10 t	D726176.04	D726176.02	D726176.10
RTN 15 t	D726177.04	D726177.02	D726177.10
RTN 22 t	D724781.04	D724781.02	D724781.10
RTN 33 t	D724754.04	D724754.02	D724754.10
RTN 47 t	D724782.04	D724782.02	D724782.10
RTN 68 t	D724783.04	D724783.02	D724783.10
RTN 100 t	D724784.04	D724784.02	D724784.10
RTN 150 t	D726178.04	D726178.02
RTN 220 t	D726179.04	D726179.02
RTN 330 t	D726180.04	D726180.02
RTN 470 t	D726181.04	D726181.02

Xem thêm chi tiết : TẠI ĐÂY

The post Loadcell RTN Schenck Process appeared first on thietbicongnghiepnang.com.

Loadcell VEB Schenck Process

thietbicongnghiepnang — 2019-09-26 11:58:39

TMP VIETNAM - Chuyên cung cấp cảm biến trọng lượng (load cell) Schenck Process chính hãng

Cảm biến trọng lực Schenck Process

Load Cells VBB and Load Cell Mounts VEB

Highest accuracies (up to 6000 increments to OIML R60)
Hermetically sealed due to laser welding (IP68)
Use in hazardous zone with protection class
Ex ia IIC T4 Gb / Ex ia IIIC T125 °C Db or protection class
Ex nA IIC T4 Gc / Ex tb IIIC T125 °C Db
Optimized for parallel connection through perfect calibration
6-wire circuit
100 % stainless steel

Thông số kĩ thuật

Rated capacity	Emax	5 kg – 0.5 t
Accuracy class		D1	C3*	C4**	C6***	Reference
Nominal characteristic value	Cn	2 mV/V +20 μV/V; -2 μV/V	2 mV/V ±1 μV/V
Combined error	Fcomb	0.05 %	0.02 %	0.013 %	0.01 %	Cn
Zero signal return after loading (30 min)	Fdr	±0.049 %	±0.016 %	±0.012 %	±0.008 %	Cn
Creep error during stress (30 min)	Fcr	±0.049 %	±0.016 %	±0.012 %	±0.008 %	Cn
Temperature coefficient of zero signal	TK0	±0.05 %/10 K	±0.0125 %/10 K	±0.009 %/10 K	±0.009 %/10 K	Cn в Вtn
Temperature coefficient of characteristic value	TKc	±0.05 %/10 K	±0.008 %/10 K	±0.007 %/10 K	±0.004 %/10 K	Cn в Вtn
Maximum number of increments in certified applications	nLC	1000	3000	4000	6000
Min. scale interval	vmin	0.036 %	0.009 %	0.0066 %	0.0066 %	Еmax
Minimum utilisation rate	Bamin	36 %	27 %	26 %	39 %	Еmax
Maximum utilisation rate	Bamax	Bamax = Emax
Input resistance	Re	350 Ω - 480 Ω				tr
Output resistance	Ra	356 Ω ±0.2 Ω	356 Ω ±0.12 Ω			tr
Zero signal	S0	±1 %				Cn
Maximum supply voltage	Usmax	18 V
Nominal temperature range	Btn	-10 °C … +40 °C
Service temperature range Explosion-proof design	Btu	-40 °C … +70 °C -30 °C … +70 °C
Reference temperature	tr	23 °C
Storage temperature range	Bts	-50 °C … +85 °C
Safe load limit	EL	150 %				Cn
Breaking load	ED	300 %				Cn
Displacement at rated capacity		0.25 mm	0.3 mm	0.4 mm	0.6 mm
Displacement at rated capacity		5 kg	10 - 100 kg	200 kg	500 kg
Protection class Explosion-proof design		IP68 (tightened test conditions: 1 m water gauge; 100 h) IP67
Cable specification		3 m PVC cable, 6 wires, shielded, shield on housing
Colour code		black: input - / blue : input + / black/yellow: shield red : output - / white : output + grey : sensor - / green : sensor +
Corrosion protection		Stainless steel

Order code

Variants Load Cells	Order No.	Ex-Variants Load Cells	Order No. 2GD	Order No. 2D/3G
VBB 5 kg D1	D 725 417.01
VBB 10 kg D1	D 725 417.02
VBB 10 kg СЗ	D 725 419.02	VBB 10 kg СЗ „Ex"	D 725 419.32	D 725 419.42
VBB 20 kg D1	D 725 417.03
VBB 20 kg C3	D 725 419.03	VBB 20 kg C3 „Ex"	D 725 419.33	D 725 419.43
VBB 50 kg D1	D 725 417.04
VBB 50 kg C3	D 725 419.04	VBB 50 kg C3 „Ex"	D 725 419.34	D 725 419.44
VBB 0.1 t D1	D 725 409.01	VBB 0,1 t D1 „Ex"	D 725 409.61	D 725 409.41
VBB 0.1 t C3	D 725 409.04	VBB 0,1 t C3 „Ex"	D 725 409.64	D 725 409.44
VBB 0.1 t C4	D 726 370.01	VBB 0,1 t C4 „Ex"	D 726 370.31	D 726 370.41
VBB 0.2 t D1	D 725 409.02	VBB 0,2 t D1 „Ex"	D 725 409.62	D 725 409.42
VBB 0.2 t C3	D 725 409.05	VBB 0,2 t C3 „Ex"	D 725 409.65	D 725 409.45
VBB 0.2 t C4	D 726 370.02	VBB 0,2 t C4 „Ex"	D 726 370.32	D 726 370.42
VBB 0.2 t C6	D 726 370.04	VBB 0,2 t C6 „Ex"	D 726 370.34	D 726 370.44
VBB 0.5 t D1	D 725 409.03	VBB 0,5 t D1 „Ex"	D 725 409.63	D 725 409.43
VBB 0.5 t C3	D 725 409.06	VBB 0,5 t C3 „Ex"	D 725 409.66	D 725 409.46
VBB 0.5 t C4	D 726 370.03	VBB 0,5 t C4 „Ex"	D 726 370.33	D 726 370.43

Xem thêm chi tiết : TẠI ĐÂY

The post Loadcell VEB Schenck Process appeared first on thietbicongnghiepnang.com.

Loadcell PWS Schenck Process

thietbicongnghiepnang — 2019-09-26 11:58:37

TMP VIETNAM - Chuyên cung cấp cảm biến trọng lượng (load cell) Schenck Process chính hãng

Tăng Minh Phát - Chuyên cung cấp thiết bị Schenck Process chính hãng tại Việt Nam

Cảm biến trọng lực Schenck Process

Platform Load Cell, PWS Type 10 ... 700 kg

Very low corner load error
Good cost-benefit ratio
Available with 0.05 % accuracy and in a legal-for-trade version
Use in hazardous zone with protection class Ex ia IIC T4 Gb / Ex ia IIIC T125 °C Daor protection class
Ex nA IIC T4 Gc / Ex tc IIIC T125 °C Dc
ATEX and IECEx certification
Optimized by exact calibration for parallel circuits
Six-wire circuitry
100 % Stainless steel

Thông số kĩ thuật :

	D1	C3
Nominal characteristic value	2 ±0,002 mV/V
Combined error	0,05 % *)	0,02 % *)
Sensitivity temperature coefficient, TKc	0,045 % / 10 K *)	0,018 % / 10 K *)
Zero signal temperature coefficient, TKo	0,045 % / 10 K *)	0,014 % / 10 K *)
Zero signal tolerance	≤ 2,0 % *)
Max. number of increments	-	n = 3000
Min. utilization	-	Bamin. = 42 % (at 3000 d)
Min. load cell increment value ***)	-	V min = Nominal load WZ 7143
Nominal temperature	-20 °C … +40 °C
Operating temperature Explosion-proof design	-40 °C … +70 °C -30 °C … +70 °C
Storage temperature	-50 °C … +85 °C
Max. excitation voltage.	15 V
Input resistance	390 ±10 Ω
Output resistance	350 ±2 Ω
Isolation resistance	> 5000 MΩ
Limit load rel. to nominal load	150 %
Breaking load/ nominal load	300 %
Corner load error at 50 % nominal load	0,05 % / 100 mm
Corner load error at 50 % nominal load **)	0,5 % / 100 mm
Material	Stainless steel
Protection class Explosion-proof design	IP65 IP67

ORDER CODE

Emax = Nominal

load

Accuracy class

Part No.

"A"

"B"

"C"

Tightening

torque

Nominal measuring

route

ATEX

Loadcell VDW Schenck Process

thietbicongnghiepnang — 2019-09-26 11:58:34

TMP VIETNAM - Chuyên cung cấp cảm biến trọng lượng (load cell) Schenck Process chính hãng

Tăng Minh Phát - Chuyên cung cấp thiết bị Schenck Process chính hãng tại Việt Nam

Cảm biến lực Schenck Process

VDW Self-Centering Pressure Load Cell

Thông số kĩ thuật :

Rated Capacity	Emax	33t / 44t				Reference
Accuracy Class:		C3
Nominal Characteristic Value	Cn	2.2 mV/V ± 0.5% *)
Combined Errors	Fcomb	0.02 %				Cn
Zero-Signal Return After Loading (30m)	Fdr	± 0.12 %				Cn
Creeping Under Load (30 min)	Fcr	± 0.017 %				Cn
Temperature Coefficient of the Zero Signal per 10 K	TK0	± 0.014 % ± 0.04 %				Cn, Btn Cn, Btu
Temperature Coefficient of the Characteristic Value per 10 K	TKc	± 0.008 % ± 0.025 %				Cn, Btn Cn, Btu
Max. Permissible Number of Legal for Trade Scale Intervals	nLC	3000
Smallest Scale Interval	Vmin	Emax/10000
Max. Application Area	Bamax	Bamax = Emax
Input Resistance	Re	700 Ù ± 3%				Tr
Output Resistance	Ra	706 Ù ± 0.5% *)				Tr
Zero Signal	S0	± 1%				Cn
Max. Supply Voltage	Usmax	12V +10%
Nominal Temperature Range	Btn	-10°C to +40°C
Operating Temperature Range	Btu	-30°C to +70°C
Storage Temperature Range	Bts	-50°C to +85°C
Permissible Angle Error	a	5°
Permissible Horizontal Displace- ment	Smax	13mm
Restoring Force	Fr	0.76% / 0.94% per mm displacement				E
Nominal Measuring Displacement		0.8mm / 0.9mm				Emax
Limit Load	El	45t / 60t
Breaking Load	Ld	100t / 125t
Vibrational Loading (as per DIN 50100)		70% Emax. Peak load may not exceed the load Emax
Protection Class		IP 68 (1m; 100hr); IP 69K
Cable Specification		TPE (grey) Æ 5,3mm, silicone- and halogen-free, -30°C to +120°C; length 15m
Connection Assignment		black: grey: red:	input + sense + output +	/ blue: / green: / white:	input - sense - output -
Material		Stainless steel
Weight including pressure pieces		4.7 kg

ORDER CODE

Design	Material number
VDW 33t, C3 without mounting parts	V080434.B01
VDW 44t, C3 without mounting parts	V080434.B02
Set of mounting parts (2 thrust pieces) for load cell VDW	V080494.B01

Xem thêm chi tiết : TẠI ĐÂY

The post Loadcell VDW Schenck Process appeared first on thietbicongnghiepnang.com.

Loadcell RTB Schenck Process

thietbicongnghiepnang — 2019-09-26 11:58:32

TMP VIETNAM - Chuyên cung cấp cảm biến trọng lượng (load cell) Schenck Process chính hãng

Tăng Minh Phát - Chuyên cung cấp thiết bị Schenck Process chính hãng tại Việt Nam

Cảm biến trọng lực Schenck Process

Ring torsion load cell - Loacell dạng vòng

Ứng dụng

The load cell as transducer converts the mechanical input variable force proportionally into the electronic output variable voltage.

The specific model of the ring torsion load cell offers the user specific advantages:

The extremely small frame size simplifies the use in almost all weighing device applications
The robust construction allows problem-free transport, installation and operation, also under rough ambient conditions (disturbance forces, temperature)

Chức năng

High reproducibility
High long-term stability and therefore consistently high accuracy permanently
Extremely small measured value influence as a result of lateral forces
High functional safety, even with frequently unavoidable impact loads and constraining forces, as well as with electrical interferences
Torque-free force input/output as a result of the direct, vertical power train

Thông số kĩ thuật :

Nominal load	Emax	0.13 t	0.25 t		0.5 t		—
Accuracy class		C3	C3		C3	C5	Ref
Nominal characteristic value	Cn	1 mV/V ±0.1 mV/V	1.75 mV/V ±0.2 mV/V		2 mV/V ±0.1 mV/V		—
Combined error	Fcomb	±0.023 %	±0.023 %			±0.0140 %	Cn
Dead load return after load (30 min)	Fdr	±0.0167 %	±0.0167 %			±0.0083 %	Cn
Creepage under load (30 min)	Fcr	±0.012 %	±0.0245 %			±0.0123 %	Cn, Btn
Hysteresis		±0.017 %	±0.0167 %			±0.0083 %	Cn, Btn
Temperature coefficient of the zero signal per 10 K	TK0	±0.008 % —	±0.014 % ±0.007 %			±0.009 %	Cn, Btn Option MR
Temperature coefficient of the characteristic value per 10 K	TKc	±0.008 %	±0.01 %			±0.005 %	Cn, Btn
Max. permissible number of legal-for-trade scale intervals	nLC	3000	3000			5000	—
Smallest scale interval	Vmin	Emax/17500 —	Emax/10000 Emax/20000			Emax/17500	Standard Option MR
Minimum application range	Bamin	17 % —	30 % 15 %			40 %	Emax Option MR
max. application range	Bamax	100 %					Emax
Maximum capacity *	Ll	150 %					Emax
Max. lateral load **	Lq	20 %					Emax
Input resistance	Re	1260 W ±100 W	1100 W ±100 W		1100 W ±100 W		—
Output resistance	Ra	1020 W ±0.5 W	1025 W ±25 W		1025 W ±25 W		—
Zero Signal	S0	1 %	1.5 %		1 %		Cn
Supply voltage	Us	max. 30 V (recommended: 5 V – 15 V)					—
Nominal temperature	Btn	-10 °C - +40 °C					—
Operating temperature range	Btu	-30 °C - +70 °C	-35 °C - +70 °C				—
Storage temperature range	—	-50 °C - +90 °C	-50 °C - +90 °C				—
Protection class	—	IP68					—
Cable Specification	—	Length of cable 5 m, Shield insulated by the housing (0.13 t), and connected with the housing (0.25 t – 0.50 t)					—
Connection assignment	—	Input + 82: pink / Input - 81: gray Output + 28: brown / Output - 27: white					—
Material	—	Stainless steel					—
Corrosion protection	—	See resistance table DDP8 483					—
Recommended tightening torque for the fastening bolts	—	8 Nm	12 – 14 Nm				—
ATEX approval	—	Only operate intrinsically safely:		II 1G Ex ia IIC T4 Ga II 1D Ex ia IIIC T73°C Da			—
		Not operated intrinsically safely:		II 3G Ex nA IIC T4 Gc II 3D Ex tc IIIC T63°C DC			—

ORDER CODE

Design	Accuracy class
[t]	C3	C5
0.13	V041085.B01	—
0.25	V041086.B01	—
0.50	V041087.B01	V041087.B05
0.25 MR	V041086.B07	—
0.50 MR	V041087.B07	—
Order numbers model ATEX/IECEX II 1G Ex ia IIC T4 Ga/ II 1D Ex ia IIIC T73°C Da/ II 3G Ex nA IIC T4 Gc/ II 3D Ex tc IIIC T63°C DC*
0.13	V041085.B11	—
0.25	V041086.B11	—
0.50	V041087.B11	V041087.B15

Xem thêm chi tiết : TẠI ĐÂY

The post Loadcell RTB Schenck Process appeared first on thietbicongnghiepnang.com.

DISOBOX Plus MR | Bộ chuyển đổi tín hiệu Schenck Process

thietbicongnghiepnang — 2019-09-03 11:23:41

DISOBOX Plus MR | Bộ chuyển đổi tín hiệu Schenck Process Readmore

Tăng Minh Phát - Nhà cung cấp Schenck Process tại Việt Nam

A/D Converter DISOBOX^® Plus MR

On-site weighing electronics - IP66

Optimized for Schenck Process dynamic train scales

Individual sensors directly connected

Digital transmission of measured values

Active electronics replacement with no readjustment or recalibration

Thông số kĩ thuật :

Processor	ARM-9
RAM	32 MB
Flash	16 MB
EEPROM	16 kB
Clock	Real-time clock, 2 weeks buffer
Display and keyboard	None
The housing	On-site, protection class IP66
No. of measuring chan- nels	8 for connecting up to 4 measuring eyes and 8 weighing sleepers
Load cell power supply	5 V AC
Scan rate	130/s per measuring channel (160/s for 60 Hz Mains voltage)
Connections	4-wire
Minimal signal voltage	0.5 μV/d x √n n: the number of the measuring channels per scales
Number of digits in legal- for-trade operation	N ≤10 000 d
Linearity error	<0.05 ‰
Zero point stability, TK0	<0.6 μV / 10 K <0.03 ‰ / 10 K based on the max. input voltage
Range error, TKc	<0.03 ‰ / 10 K
Compound error Fcomb	<0.08 ‰ / 10 K
Operating temperature range legal-for-trade	-30 °C … +50 °C (EU) -10 °C … +40 °C (USA)
Storage temperature	-30 °C … +60 °C
Interface	1x RJ45 (10/100BASE- TX) for servicing 1x fiber optic cable for connecting the weighing PC
Weight	11.6 kg
Test certificate number (EU)	D09-10.21
Certificate of Confor- mance (USA)	09-048

Một số Module DISOBOX Plus MR

Delivery item	Material number
Basic model DISOBOX Plus MR incl. 230 V/24 V power supply unit and fiber optic connection	V081126.B01
Accessories
Relay board VEA8020	V081113.B01
Namur converter for track switcher, 1 channel	V087369.B01
Overvoltage protection 230 V	V012098.B02
Overvoltage protection 24 V	V032811.B01 V022717.B02
Spare parts
Power supply unit DN-60-24	V126569.B01
Terminal board VKE1082	V081118.B51
Processor board VFE1000	V081012.B51
Measuring module VME1000	V081022.B01
JetNet fiber optic media converter Temperature range -10 °C … +60 °C expanded to -40 °C … +75 °C	V079503.B04 on request

CÁC SẢN PHẨM KHÁC CỦA SCHENCK PROCESS

The post DISOBOX Plus MR | Bộ chuyển đổi tín hiệu Schenck Process appeared first on thietbicongnghiepnang.com.

DISOBOX Plus | Bộ chuyển đổi tín hiệu Schenck Process

thietbicongnghiepnang — 2019-09-03 11:06:53

TMP VIETNAM - Chuyên phân phối thiết bị Schenck Process chính hãng tại Việt Nam

Tăng Minh Phát - Nhà cung cấp Schenck Process tại Việt Nam

The post DISOBOX Plus | Bộ chuyển đổi tín hiệu Schenck Process appeared first on thietbicongnghiepnang.com.

DISOCONT Tersus | Module điều khiển Schenck Process

thietbicongnghiepnang — 2019-09-03 10:52:22

Chuyên phân phối thiết bị Schenck Process chính hãng tại Việt Nam

Tăng Minh Phát - Nhà cung cấp Schenck Process tại Việt Nam

DISOCONT® Tersus Measurement, Control and Supervisory System

DISOCONT Tersus hay còn gọi là module điều khiển các thiết bị như máy cân định lượng (weighing) và máy tiếp nhiên liệu liên tục (feeding) của Schenck Process.

Tailored by modules as needed

Product line for MechaTronic scales; a synthesis of mechanics, electrics and software

Installation close to feeder in field enclosure or in control cabinet

Reduced engineering planning and wiring costs

Commissioning and diagnostics supported by graphics

Optimal communication structures because of modular fieldbus technology

Wireless access for service

HARDWARE

Type hardware	Functions
VCU 20100	Central control electronic, minimum 1 x per system Optional extension via up to 2 additional VCU
VAI 20100	Extension by one analogue input channel
VAO 20100	Extension by one analogue output channel 0(4) ... 20 mA
VAO 20103	Extension by one analogue output channel 0 ... 10 V
VME 20102	Extension by one load cell interface channel
VFG 20103/ VFG 20104	VCU for field housing
VEG 20100	VCU for cabinet enclosure
VHM 20100	Operator panel for control panel mounting with supply by VCU 20100
VHM 20101	Operator panel for control panel mounting with separate power supply
VHM 20110	Handheld operator panel with cable
VHM 20121	Wireless handheld operator panel
VPB 28020	PROFIBUS Interface
VPN 28020	PROFINET IO Interface
VSS 28020	Modbus Interface
VCB 28020	DeviceNet Interface
VPC 20150	Service-Software EasyServe for PC
VMO or VLG	Optional local motor control unit
	Bluetooth Adapter for the VCU

SOFTWARE

Type Software for VCU 20100	Functions
VBW 20170	Beltweighers MULTIBELT
VWF 20170	Weighfeeders MULTIDOS
VLW 20170	Loss-in-Weight Feeder MechaTron, ProFlex, PureFeed
VIF 20170	Solids flow meters and feeders MUTISTREAM
VMC 20170	Mass flow meters and feeders MULTICOR
VBC 20170	Multi ingredient batch feeding
VSF 20170	MULTIFLEX screw feeder
VIO 20170	Input/output extension unit VCU

CÁC SẢN PHẨM KHÁC CỦA SCHENCK PROCESS

DISOCONT Tersus Component	VCU 20100
DISOCONT Tersus Component	VAI 20100
DISOCONT Tersus Component	VAO 20100
DISOCONT Tersus Component	VAO 20103
DISOCONT Tersus Component	VME 20102
DISOCONT Tersus Component	VFG 20103
DISOCONT Tersus Component	VFG 20104
DISOCONT Tersus Component	VEG 20100
DISOCONT Tersus Component	VHM 20100
DISOCONT Tersus Component	VHM 20101
DISOCONT Tersus Component	VHM 20110
DISOCONT Tersus Component	VHM 20121
DISOCONT Tersus Component	VPB 28020
DISOCONT Tersus Component	VPN 28020
DISOCONT Tersus Component	VSS 28020
DISOCONT Tersus Component	VCB 28020
DISOCONT Tersus Component	VPC 20150

The post DISOCONT Tersus | Module điều khiển Schenck Process appeared first on thietbicongnghiepnang.com.

Loadcell Schenck Process

thietbicongnghiepnang — 2019-08-29 22:51:04

Schenck Process chính hãng tại Việt Nam

Tăng Minh Phát - Schenck Process Chính Hãng

Mục lục nội dung

1. Giới thiệu tổng quan về Loadcell Schenck

2. Loadcell dạng vòng RTN

3. Loadcell dạng vòng RTB

4. Loadcell dạng vòng RTR/RTD

5. Rocker load cell VDW

6. Shear Beam Load Cell – VEB

7. Platform Load Cell – PWS

1. Giới thiệu tổng quan về Loadcell Schenck

Cảm biến trọng lượng Schenck Process

From classic weighing solutions for regular applications through to weighing tasks in the most difficult of environments – at Schenck Process you get all you need from a single source. Schenck Process weighing sensors can turn practically anything into a scale, with a level of accuracy up to 0,01% combined error.

- Range : 5 kg - 470 000 kg.

2. Ring Torsion Load Cell RTN

OIML approved as suitable for trade use (up to 5000 d and 7500 d in case of multi- divisional scales)
High accuracy, even for very small utilisa- tion ranges (down to 15 % in case of trade use according to OIML)
High output signal and, thus, high- resolution of useful signal range
Low power consumption allows realisation of multi-scale systems with simple evalua- tion electronics
Use in hazardous zone with protection class Ex ia IIC T4 Gb / Ex ia IIIC T125 °C Dbor protection class Ex nA IIC T4 Gc / Ex tb IIIC T125 °C Db
Protection class IP68

Variants	Accuracy class
	0.05	C3	C5 / C4 Mi 7.5
RTN 1 t	D726173.04	D726173.02	D726173.10
RTN 2.2 t	D726174.04	D726174.02	D726174.10
RTN 4.7 t	D726175.04	D726175.02	D726175.10
RTN 10 t	D726176.04	D726176.02	D726176.10
RTN 15 t	D726177.04	D726177.02	D726177.10
RTN 22 t	D724781.04	D724781.02	D724781.10
RTN 33 t	D724754.04	D724754.02	D724754.10
RTN 47 t	D724782.04	D724782.02	D724782.10
RTN 68 t	D724783.04	D724783.02	D724783.10
RTN 100 t	D724784.04	D724784.02	D724784.10
RTN 150 t	D726178.04	D726178.02
RTN 220 t	D726179.04	D726179.02
RTN 330 t	D726180.04	D726180.02
RTN 470 t	D726181.04	D726181.02

3. Ring Torsion Load Cell RTB

c	Accuracy class
[t]	C3	C5
0.13	V041085.B01	—
0.25	V041086.B01	—
0.50	V041087.B01	V041087.B05
0.25 MR	V041086.B07	—
0.50 MR	V041087.B07	—
Order numbers model ATEX/IECEX II 1G Ex ia IIC T4 Ga/ II 1D Ex ia IIIC T73°C Da/ II 3G Ex nA IIC T4 Gc/ II 3D Ex tc IIIC T63°C DC*
0.13	V041085.B11	—
0.25	V041086.B11	—
0.50	V041087.B11	V041087.B15

4. Ring Torsion Load Cell RTR/RTD

RTD – Precision Class I (0.02 %) OIML Class C-approved for up to 3000 digits (C3), also 6000 digits (C6) available RTR – Precision Class II (0.04 %)

Type RT	Rated Capacity Ln t	Limit Overload Lt		Ultimate Load Ld		Nominal Displacement h mm	Residual Weight kg	Transverse Load Factor a	Transverse Limit Load Lqmax-t
Type RT	Rated Capacity Ln t	with overload protection-t	without overload protection-t	with overload protection-t	without overload protection-t	Nominal Displacement h mm	Residual Weight kg	Transverse Load Factor a	Transverse Limit Load Lqmax-t
1	1	2.5	1.5	4	3	0.2	3	0.4	0.25
2.2	2.2	5.5	3.5	9	6.5	0.16		0.3	0.45
4.7	4.7	10	7	19	14	0.13		0.3	0.9
10	10	25	15	40	30	0.17	4	0.2	1.5
15	15	30	22	60	45			0.2	2.2
22	22		33		66	0.22	5.5	0.5	4.4
33	33		49		99	0.27	10	0.5	5
47	47		70		117	0.24	11.5	0.4	7
68	68		102		170	0.3	17.5	0.3	10
100	100		150		250	0.26	22	0.3	12
150	150		225		375	0.25	38.5	0.3	15
220	220		330		550	0.31	55	0.25	22
330	330		490		825	0.39	92	0.2	29
470	470		700		1175	0.54	140	0.15	37
Permissible transverse static limit load, Lq = a (Ln - LZ) not exceeding Lq max; Ln = Rated Capacity, Lz = Load in Measurement Axis
Overload protection for RT 1.0 to RT 15 only possible in conjunction with load cell base plate.

5. Rocker load cell – VDW load cells

Design	Material number
VDW 33t, C3 without mounting parts	V080434.B01
VDW 44t, C3 without mounting parts	V080434.B02
Set of mounting parts (2 thrust pieces) for load cell VDW	V080494.B01

6. Shear Beam Load Cell – VEB

Variants Load Cells	Order No.	Ex-Variants Load Cells	Order No. 2GD	Order No. 2D/3G
VBB 5 kg D1	D 725 417.01
VBB 10 kg D1	D 725 417.02
VBB 10 kg СЗ	D 725 419.02	VBB 10 kg СЗ „Ex"	D 725 419.32	D 725 419.42
VBB 20 kg D1	D 725 417.03
VBB 20 kg C3	D 725 419.03	VBB 20 kg C3 „Ex"	D 725 419.33	D 725 419.43
VBB 50 kg D1	D 725 417.04
VBB 50 kg C3	D 725 419.04	VBB 50 kg C3 „Ex"	D 725 419.34	D 725 419.44
VBB 0.1 t D1	D 725 409.01	VBB 0,1 t D1 „Ex"	D 725 409.61	D 725 409.41
VBB 0.1 t C3	D 725 409.04	VBB 0,1 t C3 „Ex"	D 725 409.64	D 725 409.44
VBB 0.1 t C4	D 726 370.01	VBB 0,1 t C4 „Ex"	D 726 370.31	D 726 370.41
VBB 0.2 t D1	D 725 409.02	VBB 0,2 t D1 „Ex"	D 725 409.62	D 725 409.42
VBB 0.2 t C3	D 725 409.05	VBB 0,2 t C3 „Ex"	D 725 409.65	D 725 409.45
VBB 0.2 t C4	D 726 370.02	VBB 0,2 t C4 „Ex"	D 726 370.32	D 726 370.42
VBB 0.2 t C6	D 726 370.04	VBB 0,2 t C6 „Ex"	D 726 370.34	D 726 370.44
VBB 0.5 t D1	D 725 409.03	VBB 0,5 t D1 „Ex"	D 725 409.63	D 725 409.43
VBB 0.5 t C3	D 725 409.06	VBB 0,5 t C3 „Ex"	D 725 409.66	D 725 409.46
VBB 0.5 t C4	D 726 370.03	VBB 0,5 t C4 „Ex"	D 726 370.33	D 726 370.43

7. Platform Load Cell – PWS

Emax = Nominal

load

Accuracy class

Part No.

"A"

"B"

"C"

Tightening

torque

Nominal measuring

route

ATEX

Tăng Minh Phát

Loadcell RTN Schenck Process

Cảm biến trọng lượng Schenck Process

Loadcell VEB Schenck Process

Tăng Minh Phát - Chuyên cung cấp thiết bị Schenck Process chính hãng tại Việt Nam

Cảm biến trọng lực Schenck Process

Loadcell PWS Schenck Process

Cảm biến trọng lực Schenck Process

Loadcell VDW Schenck Process

Cảm biến lực Schenck Process

Loadcell RTB Schenck Process

DISOBOX Plus MR | Bộ chuyển đổi tín hiệu Schenck Process

A/D Converter DISOBOX® Plus MR

DISOBOX Plus | Bộ chuyển đổi tín hiệu Schenck Process

DISOCONT Tersus | Module điều khiển Schenck Process

DISOCONT® Tersus Measurement, Control and Supervisory System

Loadcell Schenck Process

1. Giới thiệu tổng quan về Loadcell Schenck

Cảm biến trọng lượng Schenck Process

2. Ring Torsion Load Cell RTN

3. Ring Torsion Load Cell RTB

4. Ring Torsion Load Cell RTR/RTD

5. Rocker load cell – VDW load cells

6. Shear Beam Load Cell – VEB

7. Platform Load Cell – PWS

A/D Converter DISOBOX^® Plus MR