Đại lý AT2E tại Việt Nam

The post AT2E VIETNAM appeared first on thietbicongnghiepnang.com.

VLT ECO – Vacuum Leak Tester (ECO Model) (Air and water tight test box: vacuum test)

Tests on :

• Bottles: Glass or PET and Preforms
• Caps: Aluminium, other metal, plastic
• Cans: Aluminium, others
• Pots: caps, film, blisters etc.

VLT ST Vacuum Leak Tester (Standard Model) (Air and water tight test box: vacuum test)

Tests on :

• Bottles: Glass or PET and Preforms
• Caps: Aluminium, other metal, plastic
• Cans: Aluminium, others
• Pots: caps, film, blisters etc.

The post Thiết bị kiểm tra độ rò rỉ của chai nước appeared first on thietbicongnghiepnang.com.

AT2E CO2DA – Automatic Shaker & CO2 Calculator is a special instrument which is for calculating the carbon dioxide content in the filled drink in glass/PET bottles and cans. The simple operation which also guarantees high reproducibility makes it become a significant equipment of quality control in the beverage industry.

Technical specification:

• Measuring range:
  • CO2: 0.00 to 9.99 g/l
  • Temperature: 0 à 60 °C
  • Pressure: 0 à 6 bar
• Accuracy :
  • CO2: ±0.01 g/l
  • Temperature: ±0.2 °C
  • Pressure: ±0.02 bar
• Resolution:
  • Temperature: 0.1 °C
  • Pressure: 0.01 bar
• Sample range :
  • Maximum diameter: 120 mm
  • Maximum height : 380mm
• Units:
  • CO2: g/L, Vol, %b.w, Kg/cm2
  • Pressure: bar, psi
  • Temperature: °C, °F
• Power supply : AC 220V / 50Hz
• Dimension : 580(L) x 380(W) x 365(H) mm
• Net weight : 30 kg

The post Máy đo nồng độ CO2 trong chai nước có Gas appeared first on thietbicongnghiepnang.com.

T2E TCT-2 measure the resistance to tear or top load force (traction or compression) for all kind of packaging. Sample installed on the support and the force is raised in tear or top load direction gradually. The distance between the gauge and the support plate and column can be adjusted on request. The sample will be compressed or tore until the maximum force or respecting the settings of testing distance. The value is read on the touch screen and a report is printed.

TCT-2 complies with the ISBT voluntary standard test methods for PET bottles. With the user-defined test cycles, it can be widely compatible for any in-house standards from customers on different test requests.

Characteristic:

• Perfectly parallel plates
• Automatic record of the force
• Touch screen display
• Predefined the testing distance and testing speed
• Available for both compression (top load) test the traction (pull) test
• User-defined test cycle (up to 4 steps of force and holding time) satisfies different test request
• Memory of 30 products, 10 operators, batch number, sample number ( all by password )
• Easy installation of samples.
• Displays all the information during cycle: time, setting, operator, product, batch NO., Sample NO., value
• Reviews the real-time testing curve
• RS232 outputs
• Stainless steel design ensures the durability of tester
• Overload protected
• Safety design

Technical specifications:

• Dimensions: 500 x 400 x 870 mm
• Measuring range: 0-1000 N (Bigger by order)
• Resolution:1 N
• Power: 110/240 V, AC50-60 Hz
• Weight: 50 kg

The post Máy đo lực nén chai nhựa TCT-2 appeared first on thietbicongnghiepnang.com.

BTLT- 1 Glass Bottle Top Load Tester – Maximum Top Load Resistance Tester for Glass Bottles

The BTLT-1 is an instrument for testing the resistance to Top load effort on glass containers. It has been widely used by the glass container manufacturers and users. As a standard testing instrument for the glass container industry, it offers an important technical reference to the manufacturers for maintaining or improving the product quality and performance.

Designed for easy operation and maintenance, comply with the testing standard of ISO 8113:2004.

The top load test of containers is made up to a predefined pressure point (trial test) or until destruction.

The post Máy đo lực nén dùng cho chai thủy tinh BTLT-1 appeared first on thietbicongnghiepnang.com.

Máy cắt chai HWBC-1

The HWBC-1 Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis.

With HWBC-1, a PET bottle could be cut up to 5 predetermined sections, each section will be checked to ensure that it conforms to the exact weight assigned.

Attributes:

• Bottle cut with accuracy
• Rapid warming the wires
• Energy saving design
• Up to 5 sections cut
• Durable design
• Easy to operate
• Cutting up to 2 L bottle
• Safety cover design which exhausts gases out of face of the operator (optional)
• Excellent repeatability
• Preheating Mode / Cut Mode (heating max)

Máy cắt chai HWBC-2 

AT2E innovative HWBC-2 Hot Wire Bottle Cutter offers an automated and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis.

With HWBC-2, an automatic and steady cutting process will be carried out after pressing the button. With exhaust fan and safety door design, the exhaust gas will be away from the operator during cutting.

With HWBC-2, a PET bottle could be cut up to 5 predetermined sections under a steady force and excellent section plane could be obtained. Each section will be checked to ensure that it conforms to the exact weight assigned.

Features:

• Automatic and accurate cutting process offers a very easy way of operation
• Heating power / Standby power / Cutting speed / Return speed of wire / Cutting delay are adjustable
• Energy saving design
• Durable stainless steel design
• Touching screen offers easy and user-friendly operation
• Up to 5 sections cut and suitable for up to 2 L bottle
• Safety door and exhaust fan design which exhausts gases away from the operator
• Excellent repeatability
• Adjustable supports for bottles during the cutting process
• Graduated rulers allow accurate positioning of wires

The post Máy cắt chai lấy mẫu HWBC-1 appeared first on thietbicongnghiepnang.com.

AT2E SSA-D secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding on the tested products. However, the SSA-D can be compatible with using the needle of the classic Secure Seal Tester (typical screwed needle). It’s stainless steel design makes it resistant of any explosion during the test and ensures the safety of the operator.

The post Máy kiểm tra độ kín của nắp chai SSA-D appeared first on thietbicongnghiepnang.com.

UBPT-1 Universal Bottle Perpendicularity Gauge is used to measure the perpendicularity (deviation) of bottle and it’s a standard equipment for packaging and beverage industries.

It’s applicable for various sizes of bottle with the special design of clamping and rotatory system. With automatic calculator, data can be sent to the calculator and read easily. The MAX, MIN, and SAD (Sum of absolute difference between “MAX” and “MIN”) values will be displayed on the calculator which is very convenient for the operator.

The post Thiết bị kiểm tra độ đồng trụ chai thủy tinh UBPT-1 appeared first on thietbicongnghiepnang.com.

The GBBT-1 is an instrument for testing the internal pressure resistance of glass containers. It has been widely used by the glass container manufacturers and users. As a standard testing instrument for the glass container industry, it offers an important technical reference to the manufacturers for maintaining or improving the product quality and performance.

Designed for easy operation and maintenance, comply with the testing standard of ISO 7458:2004.

The pressure test of containers is made up to a predefined pressure point (trial test) or until destruction.

The post Máy đo áp suất phá vỡ chai thủy tinh GBBT-1 appeared first on thietbicongnghiepnang.com.

Thiết bị phòng LAB AT2E

Máy kiểm tra áp suất trong chai PET | Burst Tester | PBBT-2 AT2E

Máy kiểm tra áp suất ( Burst Tester PBBT-2) của hãng AT2E là thiết bị kiểm tra áp suất trong chai PET, để kiểm tra dung tich giãn dưới áp suất trong chai, hoặc áp suất để có thể làm vỡ chai

Ưu điểm : 

• Điều khiển bằng PLC và hiển thị trên màn hình cảm ứng 
• Hệ thông tự kẹp và chiết nước
• Lưu trữ được 10 hoạt động và 30 sản phẩm
• Giám sát và lưu nhiệt độ của nước trong chai
• Thân máy và đế bằng thép không gỉ
• Ngõ ra RS233 có thể kết nối máy tính

Máy đo áp suất phá vỡ chai PET, máy burst tester dùng cho chai PET, máy kiểm tra áp suất nén trong chai PET, máy đo lực phá vỡ chai PET

For PET bottles – Simulating filling process

PBBT-2 PET Bottle Burst Tester is specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on their requirement. The PBBT-2 is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.

Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.

After selecting the test program, the cycle will start automatically depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.

Optional part water recycling system could provide way of saving water and avoiding the unsteady pressure of tap water which may influence a normal test.

Additional booster could be chosen. It may help the PBBT-2 free of high pressure source.

Characteristics:

• Standard equipment for the PET bottle industry.
• 3internationaltest methods are available
• PLCintegrated & Touch screen control
• Automaticclamping and filling system
• Can store 10 operators and 30 products
• User defines the product lot number and sequence number
• Displaycurvesof pressure andvolume expansionduring the test
• Monitors and recordsthe temperature of thewaterduring the test
• Applicableto 2.5 L bottle(consult us forbigger size)
• Stainless steel design ensures the durability of tester
• RS232Cdata output: connected to either printer or software
• Integrated calibration function

Modes details:

Fill ramp mode:

The filling ramp mode is designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time (for example 13 seconds). Then continue to increase the pressure with a speed of 0.1 bar/s until the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion of volume limit.

Burst mode:

Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.

Custom mode:

Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.

The post Máy đo áp suất phá vỡ chai PET PBBT-2 appeared first on thietbicongnghiepnang.com.

Thiết bị phòng LAB AT2E

Thiết bị phòng LAB AT2E

Máy đo độ dày chai PET, chai thủy tinh, lon, phôi PET

* Ưu điểm của máy đo độ dày AMTG-2

• Độ chính xác cao, màn hình hiển thị 7''
• Màn hình động hiển thị : giá trị thang đo , ngày, giờ...
• Đo độ dày nhanh, chính xác cao
• Chức năng alarm cảnh báo
• Bảo mật cao, có thể đặt password để đảm bảo lưu trữ giá trị calib và dữ liệu đo
• Dữ liệu lưu 4 số (9999)

The “AMTG-2” is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminum, titanium, copper etc… The accuracy of the measurement is not affected by the shape of the samples.

It’s designed by basing on the method of the Hall Effect. Simple and rapid measure as below:

• Place the steel ball on one side of the sample and the probe on the opposite side
• Move the sample and let the probe to be the tested position
• The steel ball will be drawn by the probe automatically
• The Hall Effect sensor on the probe measures the distance between the probe tip and the steel ball

Bảng thông số : 

Thiết bị đo độ dày chai nhựa,  Thiết bị đo độ dày chai thủy tinh, Thiết bị đo độ dày phôi PET, Dụng cụ đo độ dày chai nhựa, Dụng cụ đo độ dày chai thủy tinh, Dụng cụ đo độ dày chai PET, máy đo độ dày chai nhựa

The post Máy đo độ dày chai PET, chai thủy tinh AMTG-2 appeared first on thietbicongnghiepnang.com.

Công Ty Tăng Minh Phát - Đại lý cung cấp thiết bị AT2E chính hãng tại Việt Nam

AT2E VIETNAM

Thiết bị kiểm tra độ tinh khí CO2 AT2E

1. CO2-P CO2 Purity Tester

CO 2 -P thử độ tinh khiết CO 2  là một công cụ phát triển đặc biệt cho sự kiểm soát của sự tinh khiết CO². Dựa trên nguyên lý hấp thụ để đo tạp chất (O 2 và N 2 ..) của CO² trong hỗn hợp khí.

• The CO2-P CO2 Purity Tester is a special instrument which is for calculating the purity of CO2. The principle is based on absorption burette to measure the impurities (O2 and N2 e.g.) of CO2 in a mixture of gases.
• The CO2-P CO2 Purity Tester is widely used in breweries, the laboratory measurement of CO2 recycling and purchasing.

Bình chứa CO2 trong quá trình kiểm tra

Technical specifications:

• Measurement range: 99.0~99.999% v/v CO2
• Accuracy:
  • 00%~99.75%: 0.05 % v/v
  • 80%~99.97%: 0.01 % v/v
  • 980%~99.999%: 0.001 % v/v
• Volume: 105ml KOH (NaOH)
• Dimensions: 250mm×250mm×80mm
• Weight: about 0.75kg
• Alkali liquor: 30% g/v KOH (NaOH)

2. Máy kiểm trao độ tinh khiết khí CO2 bán tự động | CO2DA AT2E

CO2DA - máy tính CO2 bán tự động là một thiết bị được thiết kế đặc biệt để tính toán CO² có trong đồ uống được đóng gói trong thủy tinh, PET và lon. Thiết lập là bán tự động và quy trình kiểm tra được tự động để đảm bảo tính toán chính xác và có thể lặp lại 100%. Việc thực hiện rất đơn giản và dễ tiếp cận với tất cả mọi người.

• Phạm vi đo:
  • CO2: 0,00 đến 9,99 g / l
  • Nhiệt độ: 0 đến 60 ° C
  • Áp suất: 0 đến 6 bar
• Chính xác:
  • CO2: ± 0,01 g / l
  • Nhiệt độ: ± 0,2 ° C
  • Áp suất: ± 0,02 bar
• độ phân giải:
  • Nhiệt độ: 0,1 ° C
  • Áp suất: 0,01 bar
• Phạm vi mẫu:
  • Đường kính tối đa: 120 mm
  • Chiều cao tối đa: 380mm
• đơn vị:
  • CO2: g / L, Vol,% bw, Kg / cm2
  • Áp suất: thanh, psi
  • Nhiệt độ: ° C, ° F
• Nguồn điện: AC 220 V / 50Hz
• Kích thước: 580 (W) x 380 (W) x 365 (H) mm
• Cân nặng: 30 kg

The post Máy đo độ tinh khí CO2 AT2E | CO2-P CO2 Purity Tester appeared first on thietbicongnghiepnang.com.